allweiler mud pump quotation

Allweiler, a business unit of CIRCOR, will exhibit at the Pumps & Valves trade fair in Dortmund, Germany February 12th and 13th 2020 (Hall 6, Booth R19-6).

Highlights of their exhibit will be the new AEB-DE dosing pump with an extremely flexible and space-saving design as well as OptiFix™, a next-generation progressing cavity pump, designed to reduce service costs. Allweiler"s team of experts will demonstrate its functionality by guiding visitors through five easy steps to dismantle the pumps.

With its quick-change design, the OptiFix progressing cavity pump is valued for its ability to save time and money. Its new service solution offers the shortest average repair time in its class. This results in less downtime; reduced maintenance and lower service costs.

OptiFix can reduce service times by as much as 85%. Due to its patented design, this pump can be serviced, repaired, and retrofitted in a fraction of the normal time. The pump"s rotor and stator can be removed without dismantling the discharge and suction casings. “If combined with the patented ALLDUR® stator, service life can be increased by as much as five times,” according to Jannik Röben, Director of Sales in Germany.

This opens up new opportunities for standardisation, easier stock-keeping, and straightforward adaptation of pump capacity. The pumps are delivered with high-quality stainless steel casings as standard so they can be used universally.

Its vertical installation option also allows users to design flexible and space-saving systems. Advanced pumping elements and the resulting optimised clamping give AEB-DE high dosing accuracy and stable performance curves.

CIRCOR’s comprehensive selection of pumps, valves, controllers, and services from leading brands allow it to serve a wide range of user markets and sales regions.

In addition to a variety of pump solutions, CIRCOR will also exhibit RTK, a feedwater valve with an integrated freewheel that was specially designed to protect feedwater pumps from cavitation.

This unique valve serves two purposes: to act as a feedwater control valve and to provide a bypass function to protect the pump from damage. The feed water valve has a hardened trim that resists wearing for lower overall maintenance costs and extended pump service life.

The oldest German pump manufacturer, founded in 1860, Allweiler GmbH is today the European market and technology leader in fluid handling solutions for shipbuilding, power generation and special industrial applications. Our product portfolio is unrivaled in the industry and includes centrifugal, propeller, screw spindle and progressive cavity pumps, as well as complete pump systems. We also manufacture peristaltic pumps and macerators. In addition to our Allweiler-branded pumps and systems, we sell the pumps and solutions of our sister company Zenith - gear pumps.

We’ve built our success on putting our customers’ needs as the top priority in the development of every individual Allweiler product. Our customers benefit from a deep knowledge of pump technologies and expertise in fluid handling applications that has grown over generations. They know our pumps are precisely manufactured to address specific applications areas and trust the quality and reliability of Allweiler pump performance. We back our pumps with expert, personal, onsite and comprehensive services.

Afghanistan, Algeria, Angola, Armenia, Azerbaijan Republic, Bahrain, Bangladesh, Benin, Bermuda, Bhutan, Botswana, Brunei Darussalam, Burkina Faso, Burundi, Cambodia, Cameroon, Canada, Cape Verde Islands, Central African Republic, Central America and Caribbean, Chad, Comoros, Côte d"Ivoire (Ivory Coast), Democratic Republic of the Congo, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Europe, Falkland Islands (Islas Malvinas), French Guiana, Gabon Republic, Gambia, Georgia, Ghana, Greenland, Guinea, Guinea-Bissau, Guyana, India, Iraq, Jordan, Kazakhstan, Kenya, Kyrgyzstan, Laos, Lebanon, Lesotho, Liberia, Libya, Madagascar, Malawi, Maldives, Mali, Mauritania, Mauritius, Mayotte, Mongolia, Mozambique, Namibia, Nepal, Niger, Oceania, Oman, Pakistan, Paraguay, Peru, Qatar, Republic of the Congo, Reunion, Russian Federation, Rwanda, Saint Helena, Saint Pierre and Miquelon, Saudi Arabia, Senegal, Seychelles, Sierra Leone, Somalia, Sri Lanka, Suriname, Swaziland, Tajikistan, Tanzania, Togo, Turkmenistan, Ukraine, Uzbekistan, Western Sahara, Yemen, Zambia, Zimbabwe

If you are supplying pump supplies, you can find the most favorable prices at Alibaba.com. Whether you will be working with piston type or diaphragm type systems, reciprocating or centrifugal, Alibaba.com has everything you need. You can also shop for different sizes pump allweiler wholesale for your metering applications. If you operate a construction site, then you could need to find some concrete pump solutions that you can find at affordable rates at Alibaba.com. Visit the platform and browse through the collection of submersible and inline pump system, among other replaceable models.

A pump allweiler comes in different makes and sizes, and you buy the tool depending on the application. The pump used by a filling station is not the one you use to fill up your tanks. There are high flow rate low pressure systems used to transfer fluids axially. On the other hand, you can go with radial ones dealing with a low flow rate and high-pressure fluid. The mixed flow pump variety combines radial and axial transfer mechanisms and works with medium flow and pressure fluids. Depending on what it will be pumping, you can then choose the pump allweiler of choice from the collection at Alibaba.com.

Alibaba.com has been an excellent wholesale supplier of pump allweiler for years. The supply consists of a vast number of brands to choose from, comes in different sizes, operations, and power sources. You can get a pump for residential and large commercial applications from the collection. Whether you want a water pump for your home, or run a repair and maintenance business, and need a supply of pump Allweiler, you can find the product you want from the vast collection at Alibaba.com.ther it is for refrigeration, air conditioning, transfer, or a simple car wash business, anything you want, itib Al.aba hascom. it can with all help of find the right product for your business.

This depends on several factors; how frequently are spare parts required? how long has the pump been in operation? and the price of the required spare parts versus the cost of a complete new pump. For example, if a new casing, impeller, shaft and mechanical seal are required, then it is more cost effective to purchase a complete new pump as a large proportion of the high value parts are required. If the pump is wearing frequently and prematurely, then this may be an indication that the wrong type or size of pump is installed. It is a good idea to talk to us in this situation as we may be able to identify the issue with your pump or system and select a more suitable pump for your requirements.

Production of modern modular semi-mobile washing lines for separation (enrichment) of sand by size classes: 0.05; 0.071; 0.1; 0.16; 0.2; 0.63; 1.0; 2.0 and 5.0 mm. These models of SGU sieve hydrocyclone plants are designed for different capacities: 20 t / h, 40 t / h, 60 t / h and 120 t / h. Each of these installations can be adjusted for individual customer requirements (coal sludge, sand, limestone and granite screening, metallurgical waste, thermal power plant sludge, etc.).A typical model of SSU consists of:- a sump of the circulating pulp, which receives the starting material and water, but often the prepared suspension is supplied;- a classification unit, which consists of a slurry pump that creates the necessary pressure to feed the slurry, a hydrocyclone of the required diameter (which affects productivity) and shape (which affects the separation size), separating the watered target product "sands" and the suspension "drain" containing dusty and clay particles (usually waste of enrichment), as well as pipelines and shut-off equipment;- dehydrating high-frequency screen GVCh with special sieves (polyurethane, rubber urethane or stainless steel sieves), which brings the final product to the required moisture class.This set of equipment is enclosed in a common semi-mobile frame and is equipped with ladders and walkways for quality control and maintenance.The sieve hydrocyclone unit operates on a partially closed cyclic principle. Its basis is a reservoir, which receives the initial mixture of sand, clay inclusions and water, in which the slurry level is kept within a certain range. In fact, the reservoir is needed to provide a certain concentration of the mixture that the centrifugal pump is able to lift into the hydrocyclone. In a hydrocyclone (or in double hydrocyclones), due to centrifugal forces, almost 100% of particles larger than 100 microns and 50-80% of particles larger than 40-80 microns are classified, which in the form of a highly concentrated mixture are discharged from the cyclone onto a dehydration (dehydration) screen located under the hydrocyclone. Smaller particles (which should contain all clay particles and other inclusions) are carried away with the main volume of water from the hydrocyclone into a system that divides the flow (automatic regulation by a valve) into a return to the tank and a drain, which is sent to the water purification system. The dewatering screen is equipped with polyurethane or rubber modular screens with openings (usually 0.3-1.5 mm), through which water efficiently drains into the tank, and sand particles slide to the discharge chute and are discharged onto the product conveyor. The content of dust particles in the sand will decrease to 0.02-0.9%.We strongly recommend that before choosing sorting or classifying equipment that is planned to solve your problem, it is imperative to carry out the necessary research of raw materials in our laboratory.

*ADE EnginesADE PartsAgriAttachmentsAuctionsAxial Piston PumpsAxleAxle HousingB20AB30ABakkieBattery EqualiserBellBell 1206Bell 1756Bell B17BBell B18BBell B18DBell B20BBell B20CBell B20DBell B25ABell B25BBell B25CBell B25DBell B30BBell B30CBell B30DBell B40Bell CabsBell EquipmentBell L1204Bell L1506DBell L1706CBell L1706EBell L2206Bell L2208Bell L2706DBell L2706EBell SparesBell Tow Tractor 1206Bell Tow Tractor 1756BroomBucketsBulldozerCabsCatering Kitchen EquipmentCaterpillarCaterpillar Engine PartsCaterpillar EnginesCentrifugal PumpsChain BlockChain SlingCherry PickerCoke Welldeck TrailersCompressorsConcreteCraneCummins EnginesCummins PartsCylindersDam ScoopsDana SpicerDashDeutz EnginesDeutz PartsDezziDiesel Bowser TrailersDiesel Water PumpDifferential Centre PortionDiffsDollyDolly TrailersDrawbar TrailersDrill RigsDrillingDrive MotorDropboxECUElectric Water PumpElectricalElectrical MotorsElectrical MotorsElectrical WinchElectronic ControllersEnginesExcavatorFinal Drive / Planetary GearsFlameproofFlow AmplifierFlow MeterFoodFood Manufacturing EquipmentForestryForkliftForklift SparesFront End Loader AxleGate ValvesGear PumpsGear SelectorGearboxGenset EnginesGensetsGraderHackney TrailersHatz EnginesHaymaking & Grass CuttersHigh Pressure Mud PumpsHoney Sucker TrailersHydraulic HosesHydraulic PumpsHydraulic WinchHydraulicsHydrostatic PumpsIndustrialIndustrial GearboxIndustrial TanksInjection PumpsInjectorsJohn Deere EnginesJoystickLimit SwitchesLister EnginesLowbed TrailersMaize MillMAN EnginesMAN PartsMercedes Benz EnginesMining EquipmentMiscellaneousMotorsMulti Stage PumpsOil CoolersOM906Orbital ValvesOther Bell PartsOther EnginesOther Engines PartsPartsPerkins EnginesPerkins PartsPlanters & SeedersPloughsPneumatic breakerPneumatic WinchPowerpackPulleyPump DrivesRadiators and IntercoolersRollersSemi TrailersSheave WheelSide ShaftSnatch BlockSolid TyresSPECIALSteering AxleTCUTelehandlerTipper TrailersTLBTLB AxleTLB CabsTLB SparesToysTractor AxleTractorsTrailer PartsTrailersTransfer CaseTransmissionTransmissionsTrencher DiggerTruck CabsTruck Front AxleTruck PartsTrucksTyresValve BankVibrating MotorsWater Bowser TrailersWater PumpWater PumpsWinchWoodWoodchippersWorkshopZIMBABWE

The interactive exploded view of an Allweiler progressive cavity pump (also called eccentric screw pump) helps you find the position number and full description of all wear parts.

Genuine Spare parts such as Allweiler stator, Allweiler rotor and coupling parts are usually rather expensive. SPS offers a wide range of 100 % compatible Allweiler ® spare parts of the highest quality standard at the best prices!

The Allweiler® progressive cavity pumps (or eccentric screw pumps) are quite popular and are found in all sectors of industrial activity – dosing, pumping viscous or pasty materials, foodstuff, chemicals and much more. They are also used in water treatment …

The Allweiler® company is German founded and still based in Germany, although it is now part of the US group Colfax that was incorporated in 1995. Allweiler offers a very wide range of pumps for all sorts of applications. In addition to the progressive cavity pumps, Allweiler® also manufactures many models as for example centrifugal and triple-screw pumps typically for the chemical and petrochemical industry among other sectors.

Note: SPS Pumps does not sell spare parts for screw pumps, but does sell spare parts for eccentric screw pumps (also called progressive cavity pumps) and for centrifugal pumps.

*Allweiler® Progressing Cavity Pumps are self-priming progressing cavity pumps used to pump or meter thin to highly viscous liquids, the pumping elements of which are the rotating rotor and the stationary stator.

Shanley Pump and Equipment, Inc. carries a full line of *Allweiler® Progressing Cavity Pumps and parts with ranges from 0 to 2500 GPM *Shanley Pump and Equipment, Inc. is not affiliated with nor a representative of *Allweiler® or the Colfax® Corporation nor any of their affiliates. Any references made are for informational purposes only.

Allweiler® NTT Self Cooling Centrifuge Pumps for Thermal Oil Pumping We carry a full line of *Allweiler® NTT Self Cooling Centrifuge Pumps and parts with ranges of 0 GPM to 6400 GPM.

The *Allweiler® NTT series Centrifugal pump for heat transfer applications is an ideal solution for the handling of organic heat-transfer oils. The NTT"s unique self-cooling design eliminates the need for additional cooling in any form due to its self-cooling design during operation.

At Shanley Pump and Equipment, Inc. we stock a complete line of *Allweiler® NTT thermal oil pumps. These are horizontal centrifugal pumps that are capable of pumping thermal oil at 660° degrees F (350°C) at up to 6,400 GPM with up to 430" feet of head and require no additional coiling. Shanley Pump and Equipment holds current in-house stock of NTT/CTT pumps with cast iron casings.

Centrifugal Pumps are pumps which convert mechanical energy into hydraulic energy by the centripetal force on the liquid. A rotating impeller increases the velocity of the fluid internally while working with the casing of the pump which acts to convert this increased velocity into a pressure increase for flow.

Centrifugal Pumps are used to pump a large variety of neutral or aggressive liquid, and environmentally hazardous liquids like water, hot water, lubrication oils, emulsions, thermal oils, and chemical products.

SN Screw Pump Main Feature: (three screw pump or three spindle pump), It is in same design, size and specification with Allweiler SN three screw pump. Sub models: SNH, SNF and SNS three screw pump, all similar to Allweiler pump.

The three spindle screw pump is a positive displacement rotary pump. Inside the pump casing, as the flanks of teeth of drive screw and idler screws are engaged and the screws are also matched with the three inset holes, several sealed moving chambers are thereby formed in between the pump inlet and outlet end.These closed chambers will take the medium inside to move from the inlet end axially and let flow pressurized progressively, to have a continuous, constant ,axial flow pressured liquid.

The three spindle screw pumps are suitable for pumping various kinds of non-corrosive oil without contents of solid grains and liquids similar to lubricating oils, The viscosity of mediums to be conveyed range from 1.2 to 100°E(3.0 to 760 cst) ,liquid with a higher viscosity could also be pumped after heating up (lowering down the viscosity). The flow range is 0.2~590m3/h, and the maximum working pressure is 100 bar, The highest temperature is 150C.

This SN screw pump is in same design, specification and size with Allweiler SN screw pump. The SN three spindle pump spare parts is also available in our sides. Since this pump is produced in China, the price is much competitive than the Origin.