china duplex mud pump factory

BW320 Horizontal three cylinder single action reciprocating plunger pump Type Horizontal three cylinder single action reciprocating plunger pump Travel 110 Cylinder Diameter(mm) 80 60 Pump Speed(min-1) 214 153 109 78 214 153 109 78 Displacement(L/min) 320 230 165 118 180 130 92 66 Pressure(MPa) 4 5 6 8 6 8 9 10 Volumetric Efficiency(%) 90 Total Efficiency(%) 78 Power Needed(kw) 30 Large Belt Nodal Diameter(mm) φ480(C×5) φ480(C×5) Speed Input(r/min) 535 Suction Height(m) 2.5 Suction Pipe Diameter(mm) φ76 Discharging Pipe Diameter(mm) φ51 Dimension(LxWxH)(mm) 1280×855×720 Single Pump(Without Engine and Air Chamber) 1905×1100×1200 Entire Pump( Without Engine and Air Chamber) Weight(kg) 650 Single Pump(Without Engine and Air Chamber) 1000 Entire Pump( Without Engine and Air Chamber) BW160/10 horizontal triplex reciprocating acting Mud pump Name BW-160/10 Type horizontal triplex reciprocating acting Cylinder diameter 70mm Stroke 70mm Speed(r/min) 200 132 83 55 Displacement(l/min) 160 107 67 44 Pressure(Mpa) 2.5 4 6.5 10 Input torque 150N*m output speed 610r/min Power(KW) 11(electric motor) Power(KW) 14.7(diesel engine) Suction pipe diameter 51mm Drain pipe diameter 25mm Weight(Kg) 500(include electric motor) 560(include diesel engine) Dimengsion 1920×830×1000mm BW160 Horizontal type single-cylinder double-acting Mud pump BW250 Horizontal, Three-cylinder single-acting, reciprocal piston pump

Mud Pump is also a popular concept of a wide range of pumps. Different regions, habits, and ultimately the pump type will not be the same. The mud pump described in this entry is a pump type in most sense: Applied mud pumps in the field of oil drilling. In fact, some non-clean water pumps and mud pumps, such as sewage pumps and slurry pumps, are also commonly used when they are called.

Mud pump refers to a machine that transports mud or water and other flushing fluid into the borehole during drilling. Mud pumps are an important part of drilling equipment.

In the commonly used positive circulation drilling, it is to send the surface flushing medium—clear water, mud or polymer rinsing liquid to the bottom end of the drill bit through a high-pressure hose, faucet and drill rod center hole under a certain pressure. Cool the drill bit, remove the cut debris and transport it to the surface.

The commonly used mud pump is a piston type or a plunger type, and the crankshaft of the pump is driven by the power machine, and the crankshaft passes the crosshead to drive the piston or the plunger to reciprocate in the pump cylinder. Under the alternating action of the suction and discharge valves, the purpose of pumping and circulating the flushing liquid is achieved.

● The power end of F series mud pump adapts combined lubricating system of forced and splash lubrication, Reliable to lubricate and increased the service life of power end.

For the successful execution of your projects, it is important to find an appropriate company with a good track record. We help you in connecting with the top mud pump manufacturers and companies and get the best quotation.

The most widely used mud pumps across the industry are Triplex Reciprocating Pumps. Their application has gained immense popularity with time because they are 30% lighter than duplex reciprocating pumps with relatively less operational cost. Moreover, through these pumps the discharge of mud is smooth and they are capable of moving large volume of mud at higher pressure.

Yes. We help you find the best mud pumps irrespective of your location. We simplify your search by connecting you with top mud pump manufacturers and mud pump companies in your location, according to your budget and business requirement.

The most widely used mud pumps across the industry are Triplex Reciprocating Pumps. Their application has gained immense popularity with time because they are 30% lighter than duplex reciprocating pumps with relatively less operational cost. Moreover, through these pumps the discharge of mud is smooth and they are capable of moving large volume of mud at higher pressure.

The different parts of a mud pump are Housing itself, Liner with packing, Cover plus packing, Piston and piston rod, Suction valve and discharge valve with their seats, Stuffing box (only in double-acting pumps), Gland (only in double-acting pumps), and Pulsation dampener. A mud pump also includes mud pump liner, mud pump piston, modules, hydraulic seat pullers along with other parts.

The wearing parts of a mud pump should be checked frequently for repairing needs or replacement. The wearing parts include pump casing, bearings, impeller, piston, liner, etc. Advanced anti-wear measures should be taken up to enhance the service life of the wearing parts. This can effectively bring down the project costs and improve production efficiency.