dragon mud pump supplier

Having a quality mud pump is a critical part of keeping your oil well drilling system running as smoothly as possible. Dragon carries a wide range of mud pumps for systems of all kinds and jobs of all sizes. We also carry a 50 BPM mud mixing table to make drilling fluid mixing more efficient and accurate so you can always get the job done safely and correctly. View our full well service pump and mud pump selection to find the right system for your job site, or check out the rest of our drilling rigs for even more options.

Welcome to Pickett Oilfield’s mud pumps web page. Our company has been in the oil & gas drilling equipment industry for over 38 years, supplying new and used mud pumps and mud pump parts to customers in practically every producing region in the world. We are here to serve all your drilling equipment needs – if you don’t see it on this site, just give us a call or email. We can get it, if you need it!

Pickett Oilfield, LLC offers prospective buyers and extensive selection of quality new and used oil & gas drilling equipment, including mud pumps and parts to choose from at competitive prices. Browse our inventory of mud pumps and mud pump parts for sale at competitive rates.For more information or to request a quote, please Contact Us at 936-336-5154 or email to Sales@PickettOilfield.com.

Well Service | Workover Rigs - DRAGON XJ550 - 106’ 255,000#, 60 SERIES ENGINE, ALLISON TRANSMISSION, DOUBLE DRUM DRAWWORKS, MCKISSICK BLOCK, 6,472 HOURS More Info

Whether you need centrifugal pumps or heavy-duty pumps for handling solid waste and trash, Dragon has you covered. We carry a full line of pumps that can run on a variety of fuels – electric, diesel, or natural gas. Dragon will also help you select the right pump with the right pressure to insure you don’t incur extra horsepower expense. Dragon stands ready to support our drilling and oilfield customers with the highest quality pumps in the ...

The concentric housing design reduces turbulence within the pump to minimize cavitation, shaft deflection, and excessive wear. The semi open impeller is designed to handle water or heavy slurries with equal efficiency. Replaceable wear plates protects the pedestal from wear and corrosion caused by fluids being pump, therefore, extending the life of the pump. The beefed-up frame design is stronger and more rigid in all wear areas.It gives a larger work ...

Dragon manufactures a full line of 300 to 1,000 HP Cooper ™ Rigs at our state-of-the-art U.S. facility and our rig team is one of the most seasoned in the industry. Whether you need a well servicing rig, a workover rig, a drilling rig, mud pumps and systems or parts and service Dragon has you covered. Our expansive inventory of parts and accessories includes mud systems, mud hoppers and mud guns, agitators, pipe racks, draw works, API 4F, 4th Edition certified masts, break blocks, McKissick tubing and drilling blocks and refurbished gear boxes for most brands of well servicing units. Our rig masts have a clearance height range of 71-124′ and capacities of 150,000 lbs too 500,000 lbs. Like all Dragon equipment our Cooper ™ Rigs are severed duty engineered. We also have hands-on experience building to severe, cold weather specs and in compliance with the state of California’s requirements.

Active Capacity—225bbl (This includes a 35bbl slug compartment).Dimensions— 41’ long X 8’-6” wide.Construction—Three runner 8” I-Beam Skid. 3/8” Plate Floors. 1/4” Heavy Crimp Walls. Handrail, Walkway and Stairs. 5” Square Tubing TopRunner. Equipment—The 6 X 8 Centrifugal Pump is powered by a new John Deere 4.5 liter electronic engine. It is also equipped with a Hopper, Three Mud Guns, ...

Engine— New Detroit Series 60 14.0 L Tier Iii Set @ 425 Hp. Transmission— Allison 5860 Straight Thru [Wet Housing]. Charging Pump— Dragon 5 X 4 Centrifugal [Hydraulic Drive]. Triplex Pump— Dragon 360 Complete With Pulsation Dampner, Shear Relief, and Mud Gauge. Control Stand— Includes Engine Gauges, Diagnostics, Start And Kill, Throttle, Charging Pump Controls, Shifter, And Emergency Kill. Dragon 360 Pump Gear Ratio— ...

New Connecting Catwalk System (Patent No.:US7,762,588 B2).Dragon Model 500-Barrel Corrugated Wall, Liquid Storage Tanks come equipped with new running gear, minimum 15 mil DFT chemical resistant liners.All tanks are steel grit blasted and painted to your specs.All are built from new 1/4" Heavy Duty Corrugated Steel. You design, we deliver. All models available now!Floor: 1/4" PL, V-Bottom with integral formed side channels.Floor Support: 10" channel ...

Air Flow at 18:" Hg 320 CFM.Max. Vacuum: 28.5" Hg.Power Required @ 27"Hg: 14 BHP.Pressures: to 35 Psi.Power Required @ Max Pressure: 44 BHP.Power Required @ 0 Hg: 19 BHP.Size of Hoses: 3".Operating Speed: 1450 Rpm.Lubrication (Oil Pump): Auto.Vanes: 8 (Fibre).Fan Cooling Continuous Duty: Yes.Approx. Net Pump Weight: 450 ...

Lake Petro provides high quality Mud Pump Parts including Mud Pump Liners, Mud Pump Fluid End Module, piston, Valve and Seat etc. With more than 10 years of experience in the oil and gas industry, we are dedicated to help and support our loyal clients with the most cost-effective and quality Liners and Pistons. We also provide mud pump price and mud pump for sale.

We offer Liners with Ceramic (Zirconia and Aluminium oxide) and Steel (Metal and Bi-metal) materials for all common brands of the mud pump and triplex mud pump.

All Lake Petro liner products are interchangeable with O.E.M. products. Meanwhile, we provide customized Liners according to drawings. Our liners, also with our other mud pump spares, are supplied for use in Honghua, F-Series, Bomco, Emsco and National lines of triplex drilling pumps. Let Lake Petro be your one-stop shop for your whole fleet of pumps. Please refer to “Suitable Pump Models” Lable for more details.

Looking for business intelligence data on Dragon Products or other suppliers of Miscellaneous Product Manufacturer? Set up your free account with IndustrySelect.