duplex mud pump for sale in china supplier

BW320 Horizontal three cylinder single action reciprocating plunger pump Type Horizontal three cylinder single action reciprocating plunger pump Travel 110 Cylinder Diameter(mm) 80 60 Pump Speed(min-1) 214 153 109 78 214 153 109 78 Displacement(L/min) 320 230 165 118 180 130 92 66 Pressure(MPa) 4 5 6 8 6 8 9 10 Volumetric Efficiency(%) 90 Total Efficiency(%) 78 Power Needed(kw) 30 Large Belt Nodal Diameter(mm) φ480(C×5) φ480(C×5) Speed Input(r/min) 535 Suction Height(m) 2.5 Suction Pipe Diameter(mm) φ76 Discharging Pipe Diameter(mm) φ51 Dimension(LxWxH)(mm) 1280×855×720 Single Pump(Without Engine and Air Chamber) 1905×1100×1200 Entire Pump( Without Engine and Air Chamber) Weight(kg) 650 Single Pump(Without Engine and Air Chamber) 1000 Entire Pump( Without Engine and Air Chamber) BW160/10 horizontal triplex reciprocating acting Mud pump Name BW-160/10 Type horizontal triplex reciprocating acting Cylinder diameter 70mm Stroke 70mm Speed(r/min) 200 132 83 55 Displacement(l/min) 160 107 67 44 Pressure(Mpa) 2.5 4 6.5 10 Input torque 150N*m output speed 610r/min Power(KW) 11(electric motor) Power(KW) 14.7(diesel engine) Suction pipe diameter 51mm Drain pipe diameter 25mm Weight(Kg) 500(include electric motor) 560(include diesel engine) Dimengsion 1920×830×1000mm BW160 Horizontal type single-cylinder double-acting Mud pump BW250 Horizontal, Three-cylinder single-acting, reciprocal piston pump

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Mud Pump is also a popular concept of a wide range of pumps. Different regions, habits, and ultimately the pump type will not be the same. The mud pump described in this entry is a pump type in most sense: Applied mud pumps in the field of oil drilling. In fact, some non-clean water pumps and mud pumps, such as sewage pumps and slurry pumps, are also commonly used when they are called.

Mud pump refers to a machine that transports mud or water and other flushing fluid into the borehole during drilling. Mud pumps are an important part of drilling equipment.

In the commonly used positive circulation drilling, it is to send the surface flushing medium—clear water, mud or polymer rinsing liquid to the bottom end of the drill bit through a high-pressure hose, faucet and drill rod center hole under a certain pressure. Cool the drill bit, remove the cut debris and transport it to the surface.

The commonly used mud pump is a piston type or a plunger type, and the crankshaft of the pump is driven by the power machine, and the crankshaft passes the crosshead to drive the piston or the plunger to reciprocate in the pump cylinder. Under the alternating action of the suction and discharge valves, the purpose of pumping and circulating the flushing liquid is achieved.

A mud pump is a reciprocating piston/plunger pump designed to circulate drilling fluid under high pressure (up to 7,500 psi (52,000 kPa)) down the drill string and back up the annulus. A duplex mud pump is an important part of the equipment used for oil well drilling.

Duplex mud pumps (two piston/plungers) have generally been replaced by the triplex pump, but are still common in developing countries. Two later developments are the hex pump with six vertical pistons/plungers, and various quintuplex’s with five horizontal piston/plungers. The advantages that Duplex mud pumps have over convention triplex pumps is a lower mud noise which assists with better Measurement while drilling and Logging while drilling decoding.

Use duplex mud pumps to make sure that the circulation of the mud being drilled or the supply of liquid reaches the bottom of the well from the mud cleaning system. Despite being older technology than the triplex mud pump, the duplex mud pumps can use either electricity or diesel, and maintenance is easy due to their binocular floating seals and safety valves.

A mud pump is composed of many parts including mud pump liner, mud pump piston, modules, hydraulic seat pullers, and other parts. Parts of a mud pump:housing itself

Duplex pumps are used to provide a secondary means of fuel transfer in the event of a failure of the primary pump. Each pump in a duplex set is sized to meet the full flow requirements of the system. Pump controllers can be set for any of the following common operating modes:Lead / Lag (Primary / Secondary): The lead (primary) pump is selected by the user and the lag (secondary pump operates when a failure of the primary pump is detected.

Alternating: Operates per Lead / Lag (Primary / Secondary) except that the operating pump and lead / lag status alternate on consecutive starts. A variation is to alternate the pumps based on the operating time (hour meter) of the lead pump.

A wide variety of duplex mud pump options are available to you, such as 1 year, not available.You can also choose from new, duplex mud pump,As well as from energy & mining, construction works , and manufacturing plant. And whether duplex mud pump is 6 months, 3 months, or {3}.

Buyer acknowledges and agrees that all equipment / parts are sold as is / where is without guarantee or warranty of any kind, either expressed or implied.

BW-160 Triplex Mud Pump is a kind of portable mud pump. The pump is a horizontal three cylinder reciprocating single acting piston pump, has four flow and four kinds of pressure, flow and pressure range, the pump has the advantages of small volume, light weight, long service life, simple operation, reliable and flexible, general and standard parts and other characteristics, light and flexible, easy to move. Can be used in railway, within the water, metallurgy, construction, geological industry deep hole 1000m geological exploration, engineering exploration with pump.

3.Horizontal pump to improve standardization, seriation, generalization,crankshaft, connecting rod body, the cross head, the pump head and some other components related to serialization and the universal, the other components of the reduced species.

Mud hog pump is used to circulate oil drilling mud on a drilling rig at high pressure. Drilling fluid or oil drilling mud is circulated down through the drill string, to help cool, lubricate and clean the drill head, and back through the annulus at high pressures. The drilling mud is also used to suspend and carry out drill cuttings from the drill head as it is brought in and out of the hole.

We can provide more types of mud pumps than other oil well drilling equipment suppliers, and the classification methods are different. There are roughly the following types:

According to the number of times a piston reciprocates in a cylinder to inhale or discharge liquid once, it is divided into sing-acting pump and double-acting pump.

According to different driven method, it is divided into diesel mud pump and electric mud pump.It depends on fuel or energy which is available on around area of drilling rigs.

A mud pump is a reciprocating piston/plunger pump designed to circulate drilling fluid under high pressure (up to 7,500 psi (52,000 kPa)) down the drill string and back up the annulus. A duplex mud pump is an important part of the equipment used for oil well drilling.

Duplex mud pumps (two piston/plungers) have generally been replaced by the triplex pump, but are still common in developing countries. Two later developments are the hex pump with six vertical pistons/plungers, and various quintuplex’s with five horizontal piston/plungers. The advantages that Duplex mud pumps have over convention triplex pumps is a lower mud noise which assists with better Measurement while drilling and Logging while drilling decoding.

Use duplex mud pumps to make sure that the circulation of the mud being drilled or the supply of liquid reaches the bottom of the well from the mud cleaning system. Despite being older technology than the triplex mud pump, the duplex mud pumps can use either electricity or diesel, and maintenance is easy due to their binocular floating seals and safety valves.

A mud pump is composed of many parts including mud pump liner, mud pump piston, modules, hydraulic seat pullers, and other parts. Parts of a mud pump:housing itself

Duplex pumps are used to provide a secondary means of fuel transfer in the event of a failure of the primary pump. Each pump in a duplex set is sized to meet the full flow requirements of the system. Pump controllers can be set for any of the following common operating modes:Lead / Lag (Primary / Secondary): The lead (primary) pump is selected by the user and the lag (secondary pump operates when a failure of the primary pump is detected.

Alternating: Operates per Lead / Lag (Primary / Secondary) except that the operating pump and lead / lag status alternate on consecutive starts. A variation is to alternate the pumps based on the operating time (hour meter) of the lead pump.