duplex mud pump output pricelist

A mud pump is a reciprocating piston/plunger pump designed to circulate drilling fluid under high pressure (up to 7,500 psi (52,000 kPa)) down the drill string and back up the annulus. A duplex mud pump is an important part of the equipment used for oil well drilling.

Duplex mud pumps (two piston/plungers) have generally been replaced by the triplex pump, but are still common in developing countries. Two later developments are the hex pump with six vertical pistons/plungers, and various quintuplex’s with five horizontal piston/plungers. The advantages that Duplex mud pumps have over convention triplex pumps is a lower mud noise which assists with better Measurement while drilling and Logging while drilling decoding.

Use duplex mud pumps to make sure that the circulation of the mud being drilled or the supply of liquid reaches the bottom of the well from the mud cleaning system. Despite being older technology than the triplex mud pump, the duplex mud pumps can use either electricity or diesel, and maintenance is easy due to their binocular floating seals and safety valves.

A mud pump is composed of many parts including mud pump liner, mud pump piston, modules, hydraulic seat pullers, and other parts. Parts of a mud pump:housing itself

Duplex pumps are used to provide a secondary means of fuel transfer in the event of a failure of the primary pump. Each pump in a duplex set is sized to meet the full flow requirements of the system. Pump controllers can be set for any of the following common operating modes:Lead / Lag (Primary / Secondary): The lead (primary) pump is selected by the user and the lag (secondary pump operates when a failure of the primary pump is detected.

Alternating: Operates per Lead / Lag (Primary / Secondary) except that the operating pump and lead / lag status alternate on consecutive starts. A variation is to alternate the pumps based on the operating time (hour meter) of the lead pump.

Tulsa Triplex is a Tulsa Rig Iron company. We manufacture pumps from 100 to 600 horsepower for drilling, reverse circulation, hydrostatic testing, water blast, and workover applications. Utilizing roller bearings throughout, our pumps are built to last. They are designed to be easily maintained and are capable of being completely rebuilt. Available as bare pump only, with chainbox, or complete pump packages.Our skids are built tough as an oilfield type with draw bars.

We provide a qualitative range of Mud Monoblock Pumps, which are immensely used in construction, agriculture, waste water management and many other industries

We “Flow Control Engineers are engaged in trading a high-quality assortment of Industrial Pumps, Automotive Oil, Woltmann Meter, Gear Boxes, Electromagnetic Flow Meters and Industrial Valves. We are a Sole Proprietorship company that is established in the year 2016 at Ahmedabad (Gujarat, India) and are connected with theread more... Brochure

Compact duplex system designed for residential and light commercial sewage application. Perfect for basement additions and remodeling projects. Brochure

GPS series, duplex, double acting, piston type, high pressure, reciprocating slush pumps are widely used for oil line, mining, industrial, geophysical survey, water well & core drilling applications, for handling drilling mud, cement slurry, sewerage and general water service. Typical applications include oil line pumping,read more...

We are one of the prominent manufacturer of Duplex Heating & Pumping Units. We offer Duplex Heating & Pumping Units, which are made of qualitative components, pre-engineered and are properly packed. These are custom design to meet the requirement of our customers.

We offer heat treatment solution for Pumping Unit Oil Circulated Duplex. Basically it is done in order to increase the hardness and withstand high temperature which is needed.

Backed by rich industry experience and market understanding, we are involved in offering a wide array of Duplex Pump Heating Unit to our valued patrons.

Fabricated using premium quality raw material, our technically advanced Duplex Hydraulic Operated Diaphragm Pump, work on a similar principle of simplex hydraulic operated pump. This pump is highly beneficial to be used in case of corrosive liquids being pumped where in the liquid is kept out of the pump body in the primaryread more...

We have a large stock of Double-Acting Duplex Pumps that are used for various applications such as fluid (including heavy oil) transfers in pipelines, mud pumping, cement pumping, water well drilling etc. in the Oil & Gas, Agriculture, Mining, Municipal & Manufacturing sectors. Duplex Pumps have two cylinders and are capable of handling different pressures, volumes and flow rates. We supply new, used and refurbished API 674 Double Acting Duplex Pumps of all leading manufacturers including Gaso, Wheatley, Gardner Denver, National & Oilwell.

Danco Pump is your one-stop pump shop. We can provide complete service for all your pumping equipment. We have all power end and fluid end parts for all major high pressure reciprocating plunger and piston pumps. Wheatley Pumps; new, used and reconditioned pumps.

High pressure plunger and reciprocating piston pumps are used in many applications. Salt water injection and disposal, crude oil transfer and well servicing all use high pressure plunger pumps and piston pumps. Waste water treatment plants and sewer cleaning would require high pressure pumps as well to process the waste and water. Carwash, mud pumps and filter wash are other applications in which the pumps would be utilized.

We are the source for all your plunger and piston pump requirements. We have components for most major pump lines such as Gaso, Wheatley, Kerr, Gardener-Denver, Weatherford, National, Oilwell, Bethlehem , Tulsa Pump models.

14 P-220 Mud Pumps 3 available completely overhauled. The pumps have been machine inspected and all data will be provided. These 2200 HP pumps complete with Southwest fluid end modules which have been reworked and pressure tested by Southwest and P-QUIP liner retention systems. The drives can be set up for AC or DC power. All Master Rig equipment meets or exceeds O.E.M. standards and a complete data pack is furnished with purchase. Please call if you have any questions.

READY TO SHIP - Three (3) completely refurbished 1600 HP Continental Emsco 7500 PSI Mud Pump Packages - liner spray system, suction manifold and dampener, discharge strainer cross, reset relief valve, 20 gallon pulsation dampener, 75 HP charge pump, two (2) GE 752 1000 HP rear mounted motors, 10 HP blower, mounted on a 3 runner skid with loading hitches and much more. Units come with complete data books and have been tested. MRI is a API facility and units comply with API standards.

Duplex mud pump package completely refurbished and never operated. Tri-Services Manufacturing TSM-500 pump, CAT engine. Data book provided with complete refurbishment details.

Rig pump output, normally in volume per stroke, of mud pumps on the rig is  one of important figures that we really need to know because we will use pump out put figures to calculate many parameters such as bottom up strokes,  wash out depth, tracking drilling fluid, etc. In this post, you will learn how to calculate pump out put for triplex pump and duplex pump in bothOilfield and Metric Unit.

Established in 1991, Laxmi Pumps Private Limited has been producing LADA Submersible Pumps exclusively with reliable quality and excellent after-sales service. LADA is the brand under which our products are manufactured and marketed.

Established in 1991, Laxmi Pumps Private Limited has been producing LADA Submersible Pumps exclusively with reliable quality and excellent after-sales service. LADA is the brand under which our products are manufactured and marketed.

We are one of the renowned Manufacturers, Exporters and Suppliers of precision-engineered Mud Pumps in Gujarat (India). Our LX-series of Mud Pumps sold under the brand name “Laxmi” is manufacturing in compliance with international standards as our company isISO 9001: 2008 certified.

Developed by a team of highly qualified engineers using computer-aided designing and manufacturing technologies, our Mud Pumps are double-acting and piston (reciprocating) type. They are designed to endure high pressure and high discharge application. In addition, they have several in-built design and constructional features that ensure high efficiency without much electricity intake.

Our Mud Pumps are available in various models and can be ordered in bulk. In addition, we offer them at very economical prices and provide customized solutions.

Our Mud Pumps are duplex double acting reciprocating type made from a single piece alloy casting capable of handling high discharge and high pressure applications. These are ideally suitable for seismograph survey, water well, oil well, core drilling mud and cement service applications. Moreover, the pumps feature continuous tooth herring-bone gears fitted with eccentric for easy economical replacement.

We have the requisite technical and commercial expertise to expand our business to new horizons of growth. Company’s main strength is its Quality and Innovative designs. This is the reason why our products are well established as POWERSAVER PUMPS in the market.