duplex mud pump specifications in stock

We stock fluid end parts for the5×6 mud pump, 5×6-1/4 FM45 mud pump, 5×8 mud pump, 5-1/2×8 mud pump, 5X10 mud pump, 4-1/2×5 mud pump, 7-1/2×8 mud pump, and 7-1/2X10 mud pump.  The Gardner Denver mud pump model numbers for the above pumps are as follows: 5X6-FGFXG, 5X8-FDFXX, 5-1/2X8-FDFXX, 5X10-FDFXD, 4-1/2X5-FFFXF, 7-1/2X8-FYFXX, 7-1/2X10-FYFXD.  We also handle Wheatley, Gaso, Worthington, Failing and Centerline parts and pumps. We also stock Foot Valve, Liner Puller, Valve Seat Puller, (4″ Inline Check Valve.  Our Gardner Denver mud pump parts are not only competitively priced, they are also made in the USA.  Oil Recommended by Gardner Denver.  Call any of our experienced representatives to get the help and knowledge you deserve.

We have a large stock of Double-Acting Duplex Pumps that are used for various applications such as fluid (including heavy oil) transfers in pipelines, mud pumping, cement pumping, water well drilling etc. in the Oil & Gas, Agriculture, Mining, Municipal & Manufacturing sectors. Duplex Pumps have two cylinders and are capable of handling different pressures, volumes and flow rates. We supply new, used and refurbished API 674 Double Acting Duplex Pumps of all leading manufacturers including Gaso, Wheatley, Gardner Denver, National & Oilwell.

A mud pump is a reciprocating piston/plunger pump designed to circulate drilling fluid under high pressure (up to 7,500 psi (52,000 kPa)) down the drill string and back up the annulus. A duplex mud pump is an important part of the equipment used for oil well drilling.

Duplex mud pumps (two piston/plungers) have generally been replaced by the triplex pump, but are still common in developing countries. Two later developments are the hex pump with six vertical pistons/plungers, and various quintuplex’s with five horizontal piston/plungers. The advantages that Duplex mud pumps have over convention triplex pumps is a lower mud noise which assists with better Measurement while drilling and Logging while drilling decoding.

Use duplex mud pumps to make sure that the circulation of the mud being drilled or the supply of liquid reaches the bottom of the well from the mud cleaning system. Despite being older technology than the triplex mud pump, the duplex mud pumps can use either electricity or diesel, and maintenance is easy due to their binocular floating seals and safety valves.

A mud pump is composed of many parts including mud pump liner, mud pump piston, modules, hydraulic seat pullers, and other parts. Parts of a mud pump:housing itself

Duplex pumps are used to provide a secondary means of fuel transfer in the event of a failure of the primary pump. Each pump in a duplex set is sized to meet the full flow requirements of the system. Pump controllers can be set for any of the following common operating modes:Lead / Lag (Primary / Secondary): The lead (primary) pump is selected by the user and the lag (secondary pump operates when a failure of the primary pump is detected.

Alternating: Operates per Lead / Lag (Primary / Secondary) except that the operating pump and lead / lag status alternate on consecutive starts. A variation is to alternate the pumps based on the operating time (hour meter) of the lead pump.

Preferred Pump offers the best rewards program in the water well equipment industry. Check out our social media pictures to see what you"ve been missing!

Duplex Pumps - Used Emsco D-500 16" stroke, 500hp duplex pump only. 268 gpm @ 2720 psi @ 65rpm with 4 3/4" pistons. 751 gpm @ 970 psi @ 65 rpm with 7 1/2" Pistons More Info

Duplex Pumps - Used 3 1/2" - 5" x 10" stroke duplex pump,96 HP, 83 GPM @ 1500 PSI @ 85 RPM with 3 1/2" Pistons or 182 GPM @ 772 PSI @ 85 RPM with 5" pistons. More Info

Browse through more than 1,500 duplex piston rods and 200 duplex pony rods in our inventory. EC Tool gives you a quote before your order, so you know what you’re getting for your money every time. While we primarily keep connecting rods for GA550 and GA750 models in stock, there are other options at your disposal as well. This includes custom connecting rods for most duplex and triplex mud pumps.

We now offer new crossheads and capsules for both EMSCO D-375 and DB-550 duplex pumps. You can also find slides and shoes for certain models. Available parts currently in our inventory include:

Robust Design and metallurgy ensuring long life, under any soil and abrasion content. Duplex action for maximum flow and increased pressure. Easy maintenance with both hydraulic and engine driven options.

Used Emsco D-300 Duplex Mud Pump Package, 5.5" liners x 14" Stroke, c/w Detroit Series 60 Diesel Engine, 965 hours showing on engine, Air Clutch & Gear Box, Belt Driven, Auxiliary Lubricator Pump, Liners, Hydril Pulsation Dampener, Skid Mounted with Ruffneck Heaters, Piping, Lights, Controls, Tool Box, Parts Cabinet. Videos at www.chadequipment.com

OPI 700 HDL TRIPLEX PUMP(Ref#7719T)  700 hp at 150 rpm, fully rebuilt, Cat 3408 engines (approx. 15000 hours and run very well)  Two available  Price:  $275,000 CDN each

NATIONAL 12P-160 TRIPLEX MUD PUMP(Ref#5586T) 3 available in India. 1600 HP, rated pump speed 140 strokes per minute, maximum fluid cylinder liner bore 6¾”, stroke 10", 10,000 PSI hydrostatic pressure of standard cylinder. 2.853 ratio of gears. 10" suction connection, 6" discharge connection. Valve pot mod .7., steel fluid ends, 5,000 psi pulsation dampener. Oilfield skid mounted. Performance Data: at 120 strokes per minute with 6¾” liners, pump will produce 4305 PSI and 574gpm. Set up for electric power. Dimensions and weight: 84,700lbs, 209"L x 113"W x 75"H. Built 1976. Located India, removed from offshore drilling rig.

NATIONAL 12P-160 TRIPLEX PUMPS(Ref#2355R)  3 available, driven by GE752 traction motor, 1600 hp, 12” stroke, 5000 psi, surge chamber, skid mounted, located Middle East  Price:  $310,000

NATIONAL 12P-160 TRIPLEX PUMPS(Ref#8938R)  3 available, overhauled by National Oilwell (ready in 2-3 weeks after purchase), 1600 hp @ 120 stroke per minute, 12” stroke, 5000 psi, skid mounted, GE Amerimex 752 traction motors, new liners, seats, valves and pistons  Price:  $295,000 each

NATIONAL 12P-160 MUD PUMP(Ref#2062Re)  Refurbished, complete with South West fluid ends and DC traction motors, located Middle East, 3 available  Price:  $720,000 each

NATIONAL 8P80 TRIPLEX MUD PUMP(Ref#9073R)  800 hp, 6-1/2” x 8-1/2”, FS, FS FE w/QC caps and cylinder head caps, Oteco 3” shear relief valve, suction screen, 5 x 6” centrifugal charging pump, powered by Cat 3412 diesel engine, rod cooling pump, Oteco type D pressure gauge, mud valves, bull wheel, master skidded, complete, good condition  Price:  $275,000

NATIONAL OILWELL 850 HP MUD PUMP(Ref#15442T)  Mattco API-9 fluid end rebuilt, very little use after rebuild, pulsation dampener, no engine, skid mounted  Price:$22,000

NATIONAL 7-P-50(Ref#6302R)  750 hp, 8” stroke, 6” suction inlet, 4” discharge outlet, piston size 4-1/2” – 7”,  max rod load 85,000#, approx. weight 11,500#, lubrication force fed, steel pump power end, double helical gears, 4.95:1 gear ratio, rod bearings sheel type replaceable, main bearings straight roler, pinion bearings spherical roller, crankshaft 1pc forged alloy steel, connecting rod knuckle joint, crosshead guide bronze replaceable, piston type fluid end Monoblock design, from high strength alloy steel, treated and sonic tested, Cat D379 diesel engine, 500 HP max linear bore size 3-1/2 – 6-1/4 x 7-3/4” stroke, test pressure 10,000 psi, gear ratio 2.742.8” suction line to 4 discharge stroke, location South America  Price:  $110,000

NATIONAL JWS 165 WELL SERVICE TRIPLEX PUMP WITH 140 BARREL WORK TANK(Ref#2633Tb) 5 x 6, Detroit 8V71 engine, standard transmission, skid mounted   Price:$87,500

NOV JWS 340 TRIPEX MUD PUMPS(Ref#2345T)  Two available, Skidded, Detroit Series 60 diesel engine DDEC V (475 hp), Allison 750 (6-speed) transmission with lock up control pane, Mission 4 x 5 centrifugal suction pump, 4” plungers, pulsation dampener, pressure gauge, safety valve, 10,000 psi fluid end, 5000 psi working pressure, NOV plug valve control manifold (4-valve) configured for 15k operation.  Can be configured to kill wells, acidize, cement, reverse circulate, drill out frac plugs or run in tandem.  Self-contained with fuel and fluid tanks and controls.  Steel canopy over skids, covered battery boxes, new batteries and disconnect switches.  Well maintained and in excellent condition.  Low hours on pumps and motors.  Ready to work.  Price:  $154,500 each

NATIONAL JWS300 MUD PUMP(Ref#2767R)  Series 60 Detroit diesel, 14 liter engine w/Allison transmission, mounted on oilfield skid, major overhaul, completely unitized with fuel tank, fluid end rebuilt by Matco  Price:  $195,000

(2) NATIONAL C350 MUD PUMPS(Ref#3077N)  Standby – not pump in 15 years.  Pumped chalk continuously at 600 psi in a cement factory.  Complete with electrics and electric motor, complete, bull wheels and guards, complete, fluid end, pistons, liners, and valves.  Low hours.  Located Europe.   Price for both:  $105,000 loaded in a 40’ container

NATIONAL G700 14” STROKE DUPLEX MUD PUMP(Ref#8312Ta)  700 HP, 14” stroke, cast iron fluid end, surge chamber, 285 gpm @ 3550 psi with 5” pistons or 805 gpm @ 1265 psi with 8” pistons, mounted on skid 10’ x 23’ with enclosure, sold as is  Price:  $27,500

NATIONAL 5-1/2 X 10” MUD PUMP(Ref#14556Ta)  skid mounted with fuel tank, 471 Detroit diesel engine, 4 speed transmission, all new injectors  Price:  $16,500

NATIONAL C-100 DUPLEX MUD PUMP SYSTEM(Ref#10047R)  National C100 duplex mud pump (currently has 5-1/2” liners), gear end and mud end is in good shape, powered by 671 Detroit engine, 1000 gallon fuel tank capacity, tndem trailer mounted (air brakes), fully winterized enclosure with heater unit, locking doors and parts shelves, stairways and rails, 8” steel suction line/hose/sand screen pot/pole winch for adjustment of suction depth,   Price:  $50,000

IDEAL 5 X 10 DUPLEX MUD PUMP(Ref#9068T)453 Detroit engine (tall, not short), mounted on 5th wheel trailer, new bearings in crane case  Price:  $18,500

PERONI PTO/C TRIPLEX MUD PUMP(Ref#6306R)  110mm (4.331”) bore x 190mm (7.480”) stroke, 5000 psig, 125 rpm, 151.6 gpm, 350 psig, stainless steel flud end, Cummins Big Cam, Model NTC-350, built 1980, Eaton 23-speed manual transmission, Philadelphia Model 13HP-2 gear reducer rated 496 hp ratio 14:1, input 1760 rpm, output 126 rpm, pressurized lubricant system, fuel tank 300 gal, trailer mounted, 11’7”H x 41’4”L x 8’1”W double frame triple axle, king pin to 5th wheel, air brakes and lights, approx. 68,700#, located South America  Price:  $90,000

HHF 500 TRIPLEX MUD PUMP(Ref#2565Tb)   (Hongua International), year 2012, KTA 1150C (19-P750) engine, 6-3/4” cylinder diameter, 7-1/2” stroke, lots of spares  Price:  $150,000

NF-500 (CHINESE MANUFACTURED0 500 hp MUD PUMP(Ref#13723R)  Manufactured 2011, 550 gpm@3000 psi, Cat C15 diesel engine, pulsation dampener, mounted on Galvanized jack-up base, located Australia  Price:  $280,000

SKYTOP BREWSTER 7-1/4 X 14” MUD PUMP(Ref#13399Rb)  379 Cat didsel engine, Matco hi pressure forged steel fluid end, quick change valve heads, Hydril dampener, brand new expendables sill in box  Price:  $59,500

OILWELL DUPLEX MUD PUMP(Ref#1190N)  Rebuilt with all new fluid end parts and rebuilt gear end, Detroit 8V71 diesel engine, mounted on oilfield skid, hand clutch, belt drive, belt guard, pulsation dampener, pressure gauge, pressure relief valve, cleaned and painted, factory specs:

OILWELL 4 X 6 MUD PUMP(Ref#8578T)  New belts, diesel power, new mud end parts, mounted on skid on 8’ x 16’ gooseneck trailer, ready to work  Price:  $28,000

EWS 440 UNITIZED MUD PUMP PACKAGE(Ref#599N)  refurbished Detroit Series 60 engine, refurbished Allison transmission, input horsepower rating 440 max, 320 max pump speed rating, 6” stroke length, 4-1/2” maximum piston size, 3000 psi fluid end working pressure rating, 3” (as required) discharge connection size, 6” (as required) suction connection size, 2” NPT accessory connection size, API#4 valve size, API#S-2 piston rod end, 35 gallon cancase oil capacity, 24 gallons liner wash capacity, internal gear ratio:  4.58:1, 6.517:1.  Price:  $200,000

DRAGON W-440 TRIPLEX 6” MUD PUMP(Ref#7756Ta)  skid mounted on 8’ x 28’ skid, Detroit 60 Series 8 cyl Turbo diesel power plant with 440 hp, on board fuel tank, M310 Series control panel  Price:  $132,500

L & L SMC T135-5 TRIPLEX 6” MUD PUMP(Ref#7756Tc)  mounted on 7’ x 21’ skid, Cat 6 cyl turbo diesel engine, in-line style system, hyd tanks  Price:  $29,500

MCFARLAND P38 PUMP(Ref#3917Ta)  low hours, 1”, 10,000 psi set up, pump can be configured for 18,000 or 25,000 psi, 60 hp electric motor, skidded  Price:  $27,500

FAMMCO TRIPLEX PUMP(Ref#2760T)  2 x SPM 600 HP 10K, 3-1/2 x 6’ stroke plunger, powered by (2) Cat C12 400 hp diesel engines, (2) Allison HT750 trans., (2) 4 x 5 cent pumps, (2) 5 x 6 slurry mixing pumps, 6 bbl mixing tub, 14 bbl averaging tub, mounted on 2002 tandem axle 8’6”W x 50’ step deck trailer  Price on Request

GARDNER DENVER PZ-11(Ref#10748R)  approx. 7000 hours, Cat 3512C (1476 hp), 5000 psi fluid end cylinder, 5-1/2” piston cylinder, antifreeze heaters, WPT W21-CG-300 Type 1 PTO clutch, 16 groove drive sheave, 16 groove bullwheel, 16 groove Kevlar belt with necessary guards, 5 x 6 x 11 charge pump c/w 50 hp@1200 rpm electric motor.  Discharge plumbing: 2” 5M XXH B/W Oteco gate valve, 4” 5M XXH b/w Oteco gate valve, 3” 5M Oteco popoff valve w/1502 connection, 2” 5M type D Oteco mud gauge with 1502 connection, Hydril 20 gal 5M pulsation damper.  Mounted on oilfield skid with separate, with expendables cabinet, knowledge box and removable engine skid for breaking the engine and pump into separate smaller loads.  Winterization package, oilfield lighting, explosion proof starters for charge pump, rod oiler pump and liner wash pumps.  Price:  $695,000 - Make Offer

GARDNER DENVER PZ9 TRIPLEX MUD PUMPS(Ref#7062T) Two Available, each complete with Cat 3508 diesel engines, pulsation dampener, and mud tanks with desander, desilter, etc.  Price for Package:  $110,000

GARDNER DENVER PZ9 TRIPLEX MUD PUMP(Ref#14850R)2 units available, no power, fully serviced to OEM specs in July 2008 and stored since then  Price for both:  $430,000

GARDNER DENVER PZ7 STYLE TRIPLEX MUD PUMP(Ref#1245Nb)  Reconditioned, inspected and tested.  550 hp input, Cat D379PCTA diesel engine (reconditioned), air start, muffler, standard instrument gauge panel, mounted on Cat rails, new 20CB500 air clutch, reconditioned radiator.  Belt drive assembly consisting of pump drive sheave, pump drive belts with belt guard, engine drive sheave, engine drive belts with belt guard, pillow block bearings.  Reconditioned Continental Emsco PD-45 12 gallon 5000 psi WP pulsation dampener.  New O’Drill/MCM ORV 21050 2” 1,000 – 5,000 psi WP shear relief valve.  New O’Drill/MCM 2” 0 – 6,000 psi WP type D mud pressure gauge.  PZ7 fluid modules complete with suction manifold and discharge strainer cross.  New CA-122 liner wash pump, pinion driven with spary nozzle system, water tank and hoses.  New fluid end expendables with 6” liners.  (3) runner oilfield type master skid with loading hitches.  New 5 x 6” R.H. centrifugal 178 series charge pump, 1-7/8 shaft, 10” impeller size, belt driven off pinion shaft, drive belts with belt guard.  New 6” fgure 400 hammer union.  New 4” 5000 psi WP gate valve, new 200 gallon air receiver tank, new air controls.  Price:  $455,000

Fitted with 5" Liner and pistons, bare pump, no extras, THIS PUMP REQUIRES PRESSURE LUBRICATION OF THE POWER END (AUXILIARY OIL PUMP REQUIRED) THIS IS NOT INCLUDED.

Fitted with 5” liners and pistons with washing and lubricating system, THIS PUMP REQUIRES PRESSURE LUBRICATION OF THE POWER END (AUXILIARY OIL PUMP REQUIRED) THIS IS NOT INCLUDED, skid mounted with a rebuilt Detroit Diesel V1271 w/ Twin Turbo, 550 HP, with a chain case and a manual transmission

Fitted with liner & pistons, with rod washing & lubrication system, bare pump no extra"s, THIS PUMP REQUIRES PRESSURE LUBRICATION OF THE POWER END (AUXILIARY OIL PUMP REQUIRED) THIS IS NOT INCLUDED, skid mounted with New CAT C13 (440 HP) diesel power unit, w/hand clutch, belt drive, belt guard, fuel tank.

Fitted with 5" Liner and pistons, w/washing & lubricating system, THIS PUMP REQUIRES PRESSURE LUBRICATION OF THE POWER END (AUXILIARY OIL PUMP REQUIRED) THIS IS NOT INCLUDED, skid mounted with New CAT C15 (540 HP) diesel power unit, with manual transmission with 4 to 1 gear case, fuel tank.

Manufactured 2008, Cat C-9 new genset, 10 bbl tank, shaker, charging pump, Allison HT750 transmission, 1600 hours, mounted on mobile 52’ trailer  Price: $290,000

GARDNER DENVER PAH MUD PUMP(Ref#7546T)  8V92 Detroit diesel engine, Allison transmission, choke manifold on unit and charge pump, pistons and liners,  Price on Request

MUD KING PAH MUD PUMP(Ref#12669T)  Detroit Series 60 engine, Allison 750 transmission, 3” centrifugal pump, 90 bbl 2-compartment circulating tank  Price:  $290,000

GARDNER DENVER TRIPLEX MUD PUMP(Ref#8245Rb)  Completely rebuilt, new paint, skid mounted, new Detroit 671 engine 165 hp @ 1800 rpm, new fuel tank, lines and fluid end, multi speed transmission and clutch, 12 volt DC starting and operating system, 5” suction, 1742 to 10,000 psi discharge pressure, 8 – 138 gpm capacity, full functional control panel, mounted on oilfield skid, dims 240”L x 90”W x 60”H 12,000#  Price:  $39,500

KERR 2200 AND 3500 OR FMC M1214 TRIPLEX MIST PUMPS(Ref#7999T) Cat engines, 4 speed transmissions, rigged up with secondary containment, onboard lighting, winterization canvas for cold weather operations, Also available with Cummins or John Deere engines Priced from $77,500 to $97,500

GARDNER DENVER PQ172 TRIPLEX MIST PUMP(Ref#7827Ta)  Deutz F3L914 45hp 3 cyl air cooled diesel engine with electric start, manual transmission, gauges, 4’H x 4’W x 7.5’ long, 3” hardline, 22 bbl mixing tank, skid mounted  Price:  $17,500

GARDNER DENVER GXP TRIPLEX 6 X 16 MUD PUMP(Ref#11010T)  Skid mounted, twin Detroit 671 diesel engines, 30 ton, dimensions: 28’L x 11’W x 8’H   Price:  $32,500

GARDNER DENVER GXR 800 HP DUPLEX MUD PUMP(Ref#12423Rb)  Matco steel fluid end, pulsation dampener, fuel tank, gauges, controls, starter, mounted on oilfield skid, completely rebuilt engine and fluid end  Price:  $125,000

GARDNER DENVER FXN 7-1/4 X 14 MUD PUMP(Ref#1403T)  Cat 3408 engine air start with pump drive and belt guard, PD55 Hydril dampener, 750 gallon fuel tank, mounted on heavy duty drop deck tandem trailer,  low hours  Price:  $87,500

GARDNER DENVER FXN 7-1/2” X 14” DUPLEX MUD PUMP(Ref#8312Tb)  500 hp, on skid with Cat D343 engine, capable of 200 gpm @ 3000 psi with 4” pistons or 775 gpm @ 940 psi with 7-1/2” pistons, sold as is  Price:  $27,500

GARDNER DENVER FXN 7” X 14” DUPLEX MUD PUMP(Ref#6637Ta)Forged steel fluid end, quick change caps, Cat 3412 diesel engine, Hydril K20 3000 pulsation dampener, Demco 2” relief valve, belt drive, type F3000# pressure gauge, rod oiler pump, speed sensor, electric start, air clutch, skidded with roof, 3-1/2” x 20’L vibrating hose  Price:  $76,000

GARDNER DENVER FZ-FXZ MUD PUMP(Ref#4087Tb)  7-1/2 x 12, Tier 1 Detroit diesel 60 Series, 12.7L 500 hp, good gear and fluid ends, same-trailer mounted, 500 gal fuel capacity  Price:  $90,000

GARDNER DENVER FXZ 6-1/2” X 12” MUD PUMP(Ref#10287Tb)  Detroit 8V71 engine, hauled on 3 axle skid trailer with 1989 TTRAC International truck  Price:  $69,500

GARDNER DENVER FXN DUPLEX MUD PUMPS(Ref#8214R)  Two available, 14” stroke, 2” rod size, 400 hp, 75 strokes per minute, cast fluid ends, unitized on oilfield skid with Cat 3406 diesel engines, air start, new filters, oil and coolant, air receiver on deck, fluorescent lighting, drive belts with air clutch.  Gone over and in good operating condition, ready to be put into service.  Pumps currently have new 6” liners with production being 480 gpm @ 1000 psi.  All fluid end parts are brand new and never used, including the valves, gears, liners, pistons, rods, head gasket, and rod packing, equipped with pulsation dampener.  32’ long x 11’ wide x 7’ high 50,000# weight  Price:  $72,500 each

GARDNER DENVER FXZ 7 X 12 MUD PUMP(Ref#6602RD) only 1300 hours on new 12 Liter Volvo engine, air clutches, skid mounted, 20’L x 9’7”W x 8.4”H, 40,000#  Price:  $45,000

GARDNER DENVER 5-1/2 X 8 FXN DUPLEX MUD PUMP(Ref#6678T)  Cast fluid end, 671 Detroit, Spicer 6853-C transmission, hydraulic pump, air controls, 1” hyd hoses, skidded  Price:  $44,500

GARDNER DENVER 5 1/2 X 10 MUD PUMP(Ref#3261Rb)  6 cylinder Cummins diesel engine, hand clutch, 5 speed transmission, 5-1/2” liners, skid mounted, 10” stroke, ready to work  Price on Request

GARDNER DENVER 5 X 10 MUD PUMP(Ref#1480Tb)  air driven, used with cement for grouting wells, sitting 3-4 years, valves will need rebuilding, trailer mounted, air over hydraulic brakes, includes 28 joints of 21’ pipe  Price:  $39,500

GARDNER DENVER 5 X 10 MUD PUMP(Ref#5882Tb)  453 Detroit engine, battery start, mounted on oilfield skid with axles, starts and runs  Price:  $14,500

GARDNER DENVER FDFXDH MUD PUMP(Ref#14457T)  4” inlet, 3” outlet, pulsation dampern, new piston and rods, engine has been removed    Price:  $40,000

5-1/2 x 8” GARDNER DENVER MUD PUMP(Ref#4523N)  Manufactured 1960’s, rebuilt a couple years ago, skid mounted, 4 cylinder Detroit engine, used Supercharger, 637 hours on it, runs good, needs cosmetic work  Price:  $32,500

GARDNER DENVER 5 X 6 MUD PUMP(Ref#302Tb)  2 available, unmounted, rebuilt pumps, need normal expendables (neoprene is old in the valves etc)  Price:  $17,500

GARDNER DENVER FG-FXG 5 X 6 MUD PUMP(Ref#3510R)  Detroit diesel engine, mounted on tandem axle trailer, one suction and one discharge hose included  Price:  $39,500

GARDNER DENVER 5 X 6 MUD PUMP(Ref#13203T)  electric drive, in custom skid, fully rebuilt gear end and fluid end, excellent condition  Price:  $22,500

GARDNER DENVER FXF-DE8 4 X 5 MUD PUMP(Ref#10148T)  Manufactured 1996, new condition of gear and fluid ends, no engine, new 4” liners, new pistons, new chrome rods, new valves, new liner studs in head, new suction flange and gasket, new 2” steel discharge flange  Price:  $13,500

4 x 5 GARDNER DENVER PISTON MUD PUMP(Ref#7097Rb)  bull wheel or can be connected to hydraulic motor, 75% condition, needs some work  Price:  $5,500

GARDNER DENVER 5 X 6 HYDRAULICALLY DRIVEN MUD PUMP(Ref#2505T)  approx. 2500 hours, unmounted, (taken off a rig), fluid ends have not been rebuilt  POR

GARDNER DENVER PE5U 4X5 TRIPLEX MUD PUMP(Ref#11077c)  powered by Cat 3306 diesel engine, Eaton 5-speed transmission, manifold, enclosed building  Price:  $72,500

GARDNER DENVER PE5 TRIPLEX MUD PUMP(Ref#4692Ta)  Detroit 6V71 engine, electric start, radiator, 2” Shear relief valve, Spicer manual transmission, skidded  Price:  $25,000

GARDNER DENVER TEE PUMP(Ref#1654T)  Manufactured 1998, 1602 hours, 4" plungers with hydraulic charge pump, Detroit Series 50 (rebuilt), 5 speed, Skid mounted with fuel tank, Rebuilt expendables with seals, valves, seats, packings and gaskets.  Price:  $72,500

GARDNER DENVER TEE MUD PUMP(Ref#6440T)  New, unused, manufactured 2014, 4 available, bare pumps  Price:  $39,500 each  New Cat C7 engines available at additional cost

GARDNER DENVER TEE 4 X 5 TRIPLEX MUD PUMP  **NEW**(Ref#9115R)  4” piston and liners, well servicing valve and seats, bare pump, extras a extra cost, 2 available (1 plunger and 1 piston)  Price bare pump:  $64,000

(1) NATIONAL C250 DUPLEX MUD PUMP7-1/4 x 15”, New fluid end parts, bolt on valve cover, Rebuilt gear end, Pulsation dampener, new Cat C15 diesel or 12V71 diesel engine, Electric start, Controls, gauges, safety shut off, Master skid   Price with Cat engine:  $135,000   Price with Detroit engine:  $120,000

GARDNER DENVER FXK 7 1/4 x 14” DUPLEX MUD PUMP  New fluid end part, Rebuilt gear end, Detroit 12V71 diesel engine, Electric starter, Controls, gauges, Safety shut off   Price:$80,000

(2) NATIONAL C-150 DUPLEX MUD PUMP 6 ¾ x 12”  250 gpm / 550 PSI, New fluid end part, Rebuilt gear end, Pulsation dampener, Detroit diesel engine, Electric start, Controls, safety shut down, Master skid  Price:$80,000   6 weeks delivery

7” x 12” WHEATLEY DUPLEX MUD PUMP  (rebuilt), Model 27-12, powered by rebuilt 671 Detroit diesel engine, rebuilt gear end and fluid end, with all new fluid end parts, hand clutch, pulsation dampener, rod lubricating gland, pressure gauge, pressure relief valve, belt drive, belt guard, fuel tank, battery start, mounted on oilfield skid, cleaned and painted, guaranteed for 6 months, delivery 12 weeks after order  Price:  $42,000     Delivery 12 weeks

CENTERLINE 7-1/2 X 10 MUD PUMP(Ref#14556Tb)  high pressure, no engine, needs retaining liner cage and (1) side suction manifold needs replacing, unmounted  Price:  $39,500

WHEATLEY 5 X 10 MUD PUMP AND KING SWIVEL(Ref#1557Nm)  20 bbl tank, mounted on gooseneck double axle dual tires trailer, 1995 International single axle tractor, hoses, hydraulic valves and hoses  Price:  $95,000

CONTINENTAL EMSCO D500 DUPLEX MUD PUMP(Ref#5074Tb)  Trailer mounted, Detroit Series 60 diesel engine 14L, 40’ tandem axle trailer with hydraulic leveling jacks, currently working  Price:  $87,500

EMSCO D500 DUPLEX MUD PUMP(Ref#6329T)  16” stroke, 500 hp, ductile iron fluid end, Cat D353 diesel engine with radiator, 640 hp, 1300 rpm, inline 6 cylinder, 4 stroke, 6-1/4” bore x 8” stroke, (1473 in3) displacement, turbo charged (air to air aftercooled) aspiration, capable of 268 gpm @ 2720 psi with 4-3/4” pistons or 751 gpm @ 970 psi with 7-1/2” pistons.  Price:  $37,500

EMSCO D500 DUPLEX MUD PUMP(Ref#6118Rh)  Emsco D500 duplex mud pump with steel fluid end, Hydril K-20-3000 pulsation dampener, belt driv with Cat D379 diesel engine, air starter, radiator, air clutch, mounted in 12’ x 29’L mud pump house with parts bin, controls  Price on Request

EMSCO D500 DUPLEX PUMPS(Ref#8722R)  Two available, Cat 3406C diesel engine, Cotta gear box, mounted in enclosed building 11’6” x 30’  Price:  $70,000

EMSCO D500 4-3/4 – 7-1/2” X 16” DUPLEX MUD PUMP(Ref#8312Tc)  500 hp, Mounted on skid with Cat D353 engine, capable of 268 gpm @ 2720 psi with 4-3/4” pistons or 751 gpm @ 970 psi with 7-1/2” pistons, sold as is  Price:  $27,500

EMSCO D500 4-3/4 – 7-1/2” X 16” DUPLEX MUD PUMP(Ref#8312Td)  500 hp, Mounted on skid with twin Detroit engines, capable of 268 gpm @ 2720 psi with 4-3/4” pistons or 751 gpm @ 970 psi with 7-1/2” pistons, sold as is  Price:  $27,500

EMSCO DA-500 4-3/4 – 7-1/2” X 16” DUPLEX MUD PUMP(Ref#8312Te)  500 hp, Mounted on skid with Cat D353 engine, capable of 268 gpm @ 2720 psi with 4-3/4” pistons or 751 gpm @ 970 psi with 7-1/2” pistons, sold as is  Price:  $27,500

EMSCO D-300 6 X 14 DUPLEX MUD PUMP(Ref#3360Tb)  Excellent condition, skid mounted on tandem axle heavy duty lowboy trailer, fluid end rebuilt with new 6” liners, liner cages, piston rods, swabs, rod packing, oiler pump, new Mattco end plug, Detroit 8V71 engine (good condition)  Price:  $44,500

CONTINENTAL EMSCO D175 7 X 12” MUD PUMP(Ref#12068Nb)  powered by 8V71 Detroit engine, flued end and engine rebuilt, all new expendables, junk box, fuel tank, air compressor and air clutch, skidded.   Price:  $100,000

EMSCO D300 DUPLEX MUD PUMP(Ref#8210N)  7 1/2 x 14, Matco steel fluid end with screw off caps, Cat 3406 diesel powered, Air chamber, Spare fluid end parts, Air start, Fuel tank, On oilfield skid, Mounted in an 11’ wide metal building, Good condition   Price: $120,000

GASO5885-WS  QUINTUPLEX PRODUCTION PUMP(Ref#10309T)  Pump only.  5” stroke, 300 hp, steel billet fluid end, 2-3/4” ceramic plungers, Delrim disc valves, 838 packing, 6” RF suction connection, 3” RTJ discharge connection, 231 gpm max, 2020 psi, max 360 rpm  Price:  $82,500

GASO 3364 MUD PUMPS(Ref#9104T)  Two available, rebuilt, cast ductile iron fluid ends, used for oil service, bare pumps, no engines, unmounted, one is flanged for suction/discharge, one is threaded  Price:  $20,000 each

GASO 1860 4-1/2 X 6 MUD PUMP(Ref#14394T)  Fluid end completely rebuilt, powered by 3 cyl Deutz diesel engine, trailer mounted, hoses and misc parts  Price$19,500

GASO MODEL 1742 5 X 10 MUD PUMPS(Ref#3276Rb)  John Deere 145 hp reconditioned engine with WPI snap in clutch, 90 gal diesel tank w/lock cap, Dayton oiler pump systemand tank, 4” suction hose and winch boom, 4’ back up bumper guard, front and rear loading hitches, 44” bullwheel with power band belt, large belt guard, 8’ x 17’ base (mud boat)  Price:  $62,500

GASO 1742 MUD PUMP 2-1/2 to 5 X 10(Ref#2412Ta)  Cummins 150 hp reconditioned engine with snap-in clutch, 90 gal diesel tank with lock cap,  Dayton oiler pump system and tank, 4” suction hose and winch boom, 4’ back up drill pipe bumper guard, front and rear loading hitches, epoxy primer and enamel paint, 44” bull wheel with power band belt, large belt guard  Price:  $82,500

GASO MODEL 1654 MUD PUMP(Ref#6937T) 5 x 8, drive shaft included, new gears and bearings 2019, new pistons and piston sleeves 2021, new valve rubber inserts and valve cup gaskets 2022, very good condition  Price:  $18,500

GASO 1550 MUD PUMP 2-1/2 TO 5 X 10(Ref#2412Tb)  Detroit 671 engine with Snap-In clutch (Gen Set approx. 1500 hours),  replaced fluid end parts with 4” liners,  mounted on 8’ x 12’ trailer with adjustable pintle and DOT lighting, 75 gal diesel tank with lock cap, Dayton oiler pump system and tank, 4” suction hose and winch boom, epoxy primer and enamel paint, 44” bull wheel with power band belt, large belt guard, 2’ x 2’ x 5’ lockable HD toolbox, mouting beams and steel/bolts  Price:  $41,500

GASO 5 X 10 MUD PUMP 1742(Ref#4047Rc)  8’ x 17’ base (mud boat), John Deere 145 hp reconditioned engine with WPI snap in clutch, 90 gal diesel tank, Dayton oiler pump system and tank, 4” suction hose and winch boom, 4’ backup drill pipe bumper guard, front and rear loading hitches, 42” bull wheel with power band belt, belt guard    PRICE:  $73,500

GASO T4507 TRIPLEX MUD PUMP(Ref#999Nb)  Triplex single acting reciprocating plunger pump, 450 hp, reconditioned rental package, aluminum bronze fluid end with 5-1/2” plungers, 642 gpm@ 1095 psi, new AR valves (3/09), Cat 3406 engine,  260 rpm, max GPM 1039, Max PSI 1200, skid mounted, coolers, controls, gauges  Price:  $175,000

5x10 GASO MUD PUMP AND TANK SYSTEM(Ref#240N)  350 gpm @ 330# psi, skid mounted trailer w/6V71 Detroit diesel engine, shale shaker 4 X 5 Schrem, 1000 gallon tank, (2) desanders, hydraulic motor on mud pickup pump  Price:  $65,000

AMERICAN DUPLEX MUD PUMP  - NEW(Ref#14063N)  Model AXG (FG-AXG), capacity (with 5” liners) 200 gpm (757) x 310 psi (21 kgcm2), @ 100 rpm, bare pump, no engine  Price:  $25,000

UNION T68 TRIPLEX MUD PUMP(Ref#999Na)  Triplex single acting reciprocating plunger pump, 6” plungers, 405 hp, 4.95:1 gear ratio, powered by 8V92T Detroit diesel engine and transmission, 617 @ 1061 psi at 210 rpm, Max GPM 620, Max PSI 1060, skid mounted, cooler, controls, gauges  Price:  $130,000

1600 HP F1600 TRIPLEX MUD PUMP(Ref#1401N)  Made in China, electric motor, Model HHF1600, triplex single acting piston type, 7” x 12” max diameter of liner stroke, 120 spm, 1176kW (1600hp) rated power, gear ratio 4.206, 12” stroke of piston, pump valve API 7#, 7” max ID of liner, max working pressure 34.3 MPa (5000 psi), max displacement (130 s/min) 50.42L/s, diameter of discharge pipe 127mm (5”), diameter of suction pipe 304mm (12”), weight 25570kg (56,000 lbs).  combined v-belt transmission 800 kw (1072 hp) * 2, 25 (J)-5-7630 V-belt, transmission ratio 2.377, Model YZ08 motor 800kw, 60 hz, Model SB6”  8” J-12 1/2” charging pump, 8” diameter outlet, 6” diameter inlet, 200m3/h displacement, 55kW power of centrifugal motor  Price:  $425,000

BOMCO SJF-1600 MUD PUMP(Ref#9621R)  1600 hp, 12” stroke, 5000 psi, pulsation dampeners, pop off pressure release valve, pump pressure gauge, forged discharge manifold, overhead track for chain hoist, mounted on shipping skid, line washer pump, 6” liners, overall size:  192 x 128 x 105-3/4”, inspection report available, 4 available    PRICE:  $137,500 each

BOMCO F-1600 MUD PUMPS(Ref#6252T)  2 available, Built 2007, powered by 1500 hp GE traction motor  Model GEB29-A1, 5k fluid ends with pulsation dampener, liner washer pump and external oil pump, on a master skid with roof  Price:  $162,500 each

QINGZHOU ORF 1000 HP MZ-9 MUD PUMPS(Two Available)  (Ref#2798R)  Manufactured 2007 and 2008, 7” x 9” 1000 hp triplex mud pump, 5000 psi pulsation dampener, 5-star 5x6 centrifugal pump 50 hp electric motor, suction screen, centrifugal rod oiler, (2) 2005 Detroit diesel 560 14L 665 hp w/ zero hours, electric start, radiator, gauges, Wichita power grip clutch, all master skidded  Price:  $255,000

CONTINENTAL EMSCO MODEL FC2200 TRIPLEX MUD PUMP(Ref#2280T)  Complete without traction motors.  9” bore x 15” stroke, single acting, working pressure up to 7500 psi, (3) interchangeable forged steel fluid end modules with separate suction and discharge sections, Premium grade fluid end expendables with 6-1/2” pistons and liners, suction manifold with (3) 12” flanged inlets, SD8 suction desurger, pressure manifold with (2) 5-1/8” 10,000# API flanged outlets, liner wash system, 1 x 1-1/2” mission centrifugal pump p/b 3 hp electric motor, external power end lubrication pump, steel skid, suction line pressure relief valve, set of standard service tools  Price:  $675,000

EMSCO STYLE F1000 TRIPLEX PUMPS(Ref#9886T)  2 available, 6-3/4” liners with 644 gpm @ 2380 psi, belt driven charging pump, pulsation dampener, with 398 Cat engines, skid mounted, ready to work  Price:  $112,500 each

-The unitization includes an electric motor powered supercharging pump piped to the suction of the mud pump, an electric powered liner wash pump mounted and piped, engine and WPT power grip 321 controls at area of engine arrangement, industrial coating on all parts and labor to clean & make ready for shipment.

-Pump suction manifold is 12”, and intake flange diameter is 12”. A 12” valve is used in suction manifold. And two suction solutions are alternative, pump charging and self-suction.

-F-1000 mud pump is driven by diesel engine (Caterpillar 3512DITA, 1250 HP @ 1200rpm) through WPT power grip 321. The unit is complete with a bull wheel, a set of V-belts, belt guard, a drive assembly and screw devices for tightening belts.

-The unitization includes an electric motor powered supercharging pump piped to the suction of the mud pump, an electric powered liner wash pump mounted and piped, engine and WPT power grip 321 controls at area of engine arrangement, industrial coating on all parts and labor to clean & make ready for shipment.

-Pump suction manifold is 12”, and intake flange diameter is 12”. A 12” valve is used in suction manifold. And two suction solutions are alternative, pump charging and self-suction.

EWCOWH-600 TRIPLEX MUD PUMP(Ref#1183N)  Manufactured 1984, good condition, powered by (2) Cat 3408 engines, mounted on oilfield skid, located Southeast Asia, immediately available  Price:  $190,000

NEW CONTINENTAL EMSCO STYLE F-1000 TRIPLEX MUD PUMP(Ref#1287N)  triplex single action piston, max. liner size x stroke 170 x 254mm (6-34” x 10”), 140 r/min strokes rating, 753kW (1000 hp), Herringbone gear, 4.207:1 gear ratio, pressure and splash lubrication, 12” flange suction inlet, 5-1/8” flanger 5000 psi discharge outlet, 7-3/4” pinion shaft dia., 2” x 2” key, valve-over-valve API#6, approx weight 41,420 lb, fully interchangeable with Continental Emsco parts, complete with pulsation dampener, suction discharge, pressure gauge, complete fluid end expendables, guaranteed for one year, delivered to Houston from China factory,  2 available  Price, delivered to Houston:  $185,000 each      (30% deposit with order, balance due when shipped from China)

CONTINENTAL EMSCO F-800 TRIPLEX MUD PUMP(Ref#664T) 800 hp, 6-3/4”, forged steel fluid end, 50003 pulsation dampener, 3” Shear relief valve, skidded  Price:  $37,500

OFM600 TRIPLEX MUD PUMP(Ref#2497T)  Manufactured 2018, 1800 hours, very excellent condition, Detroit 60 Series engine, Allison transmission, 800 psi, dims/weight 20’ x 10’ x 8’, 20,000 lbs  Price:  $320,000

AXON HD-500 TRIPLEX PLUNGER PUMP(Ref#975T)  14 liter Detroit Diesel, 6061 Allison automatic transmission, rebuilt power end, new expendables in fluid end, new charge pump, skid, tanks, Pilfer 5 valve manifold, 15k fluid end, new paint  Price:  $215,000

WHELAND DUPLEX MUD PUMP(Ref#7936)  7-1/2 x 14”, Hydril K-20 pulsation dampener, Cat D342 diesel engine, 300 bbl 3-compartment steel mud pit with (2) 7.4 hp electric mixer motors  Price:  $55,000

FMC BEAN PUMP MODEL L1122DI(Ref#3916T)  122 hp, 91 kw, 1750 max rpm, 127 gpm, 519 lpm, 1300 psi, 9063 kpa, Baldor ECP4409T 100 hp motor, 1200 rpm synchronous speed, 60hz frequency, 460V (3P)  Price on Request

HYDRAULIC PUMP WITH KUBOTA ENGINE(Ref#5073T)  Lofa Industries hydraulic pump (6.2 hours) with Kubota V3800T engine, Hydac ELD cooling system  Price:  $24,500

Bean 35 mud pumps(Ref#7739R) completely rebuilt, skid mounted with Deutz diesel engine, 4 speed transmission, low 50 hours, stored inside   Price:$14,000

OILWELL C338H TRIPLEX WATER INJECTION PUMP(Ref#6530T)  3” plungers, 3540 psi max pressure, 336 hp @ 200 rpm input, Cat G3408 gas engine, Falk gear/transmission, 100 rpm input, 290 rpm output, ratio 3.793:1, service factor 1.98, 375 hp Price on Request

SPRAGUE SYSTEM 0-55 GPM, 3500 PSI DUAL SYSTEM PORTABLE TURBO DIESEL HYDRAULICPUMP  (Ref#9235R)  New Unit.  High pressure, low volume, self-contrained.  Capable of 5000 psi intermittent duty, designed for low maintenance and flow operation.  A single adjustable back pressure regulating circuit allows operator to adjust aircraft reservoir return condition and maintains a positive reservoir head pressure on the aircraft without fluid loss.  This feature allows the system to be used on drilling rigs with different reservoir pressure requirements.  Lighted control panel.  Automatic over temperature shut down, Reservoir high/low level automatic shutdown, Safety circuit boost pump pressure switch, loss of boost pump pressure automatically shuts system down, Phase reverse relay (does not allow pump to turn in wrong rotation), Automatic air removal device (this removes the air from the oil returning from the rig at flows up to 55 gpm automatically; results are no cavitation, longer pump life, quiet system.  Reservoir drain valve, Parking brake instrument panel lights 100 hp drive motor (Deutz 125 hp), International Reservoir and system fluid emperature indicator.  Chassis has a 2-wheel mechanical parking brake.  The lower portion of the chassis serves as f ull sized drain pan with drain valve.  Cabinet is skydrol resistant stainless steel.  Removable cover assembly for major maintenance with access doors for inspection and minor maintenance.   Price:  $185,000

TEST PUMP RIG(Ref#3417T)  Mounted on 12K GVRW trailer, hydraulic powered spool with approximately 500 of 2” hose, internally routed power and safety cable, 7.5 HP pump and motor, Whisper Watt 25kva 3-phase diesel generator with approx. 3100 hours  Price:  $45,000

HYDROPLEX 15K TEST PUMP(Ref#2496R)  Manufactured 2012, 15 gallons per minute, mounted on 2008 GMC C6500 truck with diesel engine, control box, manifold, 550 gal heavy duty Snyder Megatainer tank, 123,896 miles on truck  Price:  $85,000

SCHAEFER & URBACH BT 80-120 GERMAN MANUFACTURED TRIPLEX MUD PUMPS, POWERED BY AC MOTOR AND GEAR DRIVEN(Ref#6853N) 3 available “LIKE NEW”– Manufactured 2006, Speed Max/Count: 135 SPM, 220 bar – 350 bar (5000 psi), Max. Displacement 4,005 l/min at 150 bar, Max. pressure 1,565 l/min at 350 bar, Elin 6 AC Motor, 690V/75 Hz, 1000 KW, Mounted on skid 8100 mm long x 3000mm wide x 2960 mm high. 45,000kg, Sound level: 63dB(A)@ 7 meters, Operating hours: (1) 1668, (2) 1010, (3) 2069, NOV Mission Magnum 8 x 6 x 14 charge pump, Amtec 36 kw AC Motor, 400/690V/50Hz, NOV Mission Magnum 3 x 2 x 13 liner cooler pump, 2,2 kW AC Motor 400/690V/ 50 Hz, Hydrill K20 pulsation dampener, Zollern gear / mud pump, Located in Europe

MUD PUPPY MP-255(Ref#1065T) Mounted in 16" trailer with 3 stabilizing jacks, sand guzzler, 3 x 2 centrifugal pump needs replacing, 3100 hours, includes 4" hose for pick up pump  Price:  $49,500

MUD PUPPY 2000(Ref#7953T)  Manufactured 1999, 1000 gal holding tank, (2) 3 x 4 Mission Magnum pumps with mechanical seals, MC255-2C mud cleaner, sand guzzler, Versa-drill rig jacks, Perkisn engine, spare hyd pump and filters, well maintained, ready to work  Price:  $59,500

CUSTOM BUILT MUD PUPPY(Ref#6133Ta)  800 gallon capacity, mounted on Big Tex trailer, 2” x 4” screen, 200 gpm, manual jack, no engine – runs off rig   Price:  $25,000

MUD PUPPY MUD SYSTEM(Ref#3572R)  3 x 2 Baker centrifugal pump, powered by 3 cyl Lister, Mud Puppy pick up pump, hydraulic power pack, barrel shaker, desander, dual 2000 gal mud tanks, mounted on gooseneck trailer  Price:  $60,000

MUD MIXING SYSTEM(Ref#430N)  Manufactured 2004, Mud Puppy, Deutz diesel engine,  dual shale shaker, down hole centrifugal pump, mud mixing pump, 1000 gal capacity, 500 gpm system   PRICE: $112,000

2000 GALLON SHOP BUILT SHALE SHAKER(Ref#15419Tc)  5 x 8 screen, 3 x 4 mission centrifugal pump, desanding cones, 300 gpm pickup pump, 2009 Cummins 110 hp motor with 7,150 hours, mounted on 3 axle trailer  Price:  $19,500

MUD PUPPY 170-2SC(Ref#5864Ta)  Deutz diesel engine with brand new turbo, 3 cone manifold, new style hydraulic Parker pump and new style shakers, newer 118 pump, trailer mounted  Price: $55,000

MUD SYSTEM(Ref#13092T)  2200gal Split wall tank, Twin Cummins 3.9 deck, W/3"-4" centrifugal mixing ,desilting, agitation pump . Mechanical Seals, 5.9 Turbo @2500 rpm W/3"x4" Chrome centrifugal down hole pump. Mechanical Seals desanded return with cross tank flow back flange (For sudden fluid loss), Twin 4"x5" hydraulic shaker dual screen deck, 4 Jack hydraulic leveling system. 27000GVWR tandem axles w/electric brakes . trailer can be legally pulled in NV safety by 1-ton . Brakes are excellent. @20000.GVW, Hydraulic ports for Tibban type mud return sump pump . In tank cooling.  Unit capable of 1000"x 24" drill bore with 3-1/2IF Drill string. Using open jet Tricone or similar. Unit is ready    Price:  $77,500

EDGE MUD CONDITIONER(Ref#5510RC) 600 gpm, 2 shale shakers, 1 400 gallon trash pump (1 more optional), 4 desander cones, 1 desander “Cobra” circulating pump, pintal hitch, air brakes, tank and system like new (low hours), 1200 gal tank, 4 hyd leveling jacks, tandem axle, Deutz 3 cyl air cooled diesel engine and hydraulic pumps in a removable pad,   Price:$65,000

MCT500 MUD MAN MUD SYSTEM(Ref#844R)  Manufactured 2007, rebuilt 2 years ago, 3300 gal 2-section tank, mounted on heavy duty trailer, 480 volt/3 phase, diesel generator, 500+ gpm capacity, 5” desilter cone bank, leveling jacks  Price (without generator)  $115,000  Price with generator:  $130,000

8400 GALLON/200 BBL MUD MIXING SYSTEM(Ref#14692T)  Swaco shaker, 3 centrifugal pumps, Detroit 235kw generator, mounted on 2008 tri axle step deck trailer  Price:  $137,500

MUD TECHNOLOGY MCT-450 MUD SYSTEM(Ref#7707T)  Built 2021, trailer mounted, 100 hp John Deere diesel engine, 100 kw generator fully enclosed, 4 hydraulic leveling jacks, (2) 3 x 4 centrifgual mud pumps with mechanical seals, 3000 gallon 2-section tank with mud guns in the tank, excellent condition  Price:  $187,500

MCT-450 DRILL FLUID MIXING AND CLEANING SYSTEM(Ref#3602T)  Built 2019, 156 hours, 2400 gal capacptiy two section tank, split equally for clean and dirty volume.  High G-force linear shaker, 18 sq ft shale shaker screening area, 18 sq ft desilter screening area, 36 sq ft total screening area with long runway, (6) 5” cones, 450 gpm cleaning capacity.  25hp 178 Series electric centrifugal pump to pressure feed hydrocyclones, 30 hp 178 series electric centrifugal pump to pressure feed hopper, jet guns and supercharge.  480 volt/60kw/3 phase diesel generator, safety shutdowns on engine and generator.  High shear/low pressure mixing hopper, sack table, high shear submersed jet guns in both tanks, independent valves to isolate hopper and jet guns, mounted on 12k dual tan axle trailer, pintle hitch, electric brakes, 24’L x 8’4”W x 12’4” H – 20,140 lbs.  Price:  $172,950

MUD TECHNOLOGY RST-990 MUD MIXING AND CLEANING SYSTEM(Ref#3444T)  1000 gal (approx.) 2-section tank, H G-force linear split shaker, centrifugal pump for mixing and desander, 480 volt/3 phase generator, 320 gpm cleaning capacity  POR

Gardner Denver mud pump rated at 1.7M/3 min @215 bhp with conventional heads, pulsation chamber, Odrill relief valve, 3.0” mud valve, exhaust fan, mixing hoper, liner wash pump and lubricator, driven by Eaton hydraulic pump with gear reducer and rubber block gear box. Pump house fitted with core bench, storage cabinets, insulated, fluorescent lighting, electric heat, 20 M/3 four compartment mud tank, electronic float levels, Tsunami sump pump, Mission 4x3 pre-charge pumps, Derrick FC-313M liner motion shale shaker with super G agitator. All ancillary equipment hydraulically driven off Funk rubber block four pump adaptor powered by C15 Cat engine rated at 540 HP @ 1800 RPM. Aluminum 1500 liter hydraulic tank. Operators cabin – heated, AC, swivel operators chair, deck/spot lights, full instrumentation, audio/video monitoring system, roof beacon, Retractable stairway. Aluminum fuel tank. Self-leveling deck. Pontoons 6’ X 6’ X 38”, four compartment, aluminum cleats, 5.0” chain.

EDGE DRILLING PS750 MUD RECYCLER/AIR CONTAINMENT SYSTEM  (Ref#2642T)  Brand new, never used, 750 gallon tank, 74 hp Tier 4F/Tier 5 European Hatz water cooled diesel engine, 3 x 5 double screen shaker bed, 3 x 4 centrifugal pump, 4 desander cones, with powder coat finish

MUD TECHNOLOGY MC-160 MICRO PORTABLE 1200 GALLON MUD SYSTEM(Ref#5074Ta)  2 compartment, trailer munted, 30 kw diesl generator, south attenuated weatherproof enclosure, single high G-force liner shaker with split screens, high shear submersed turbo jet guns, desilter with 5” hydrocyclone, (3) 2 x 3 centrifugal mud pumps, 110 volt outlets for accessories, hopper with sack table, easy open cleanouts, mounted on tandem axle pintel hitch trailer, currently working  Price:  $37,500

AMERICAN AUGERS MP-270 MUD SYSTEM(Ref#4330Nb) Manufactured 1995, 1028 hours, Cat 3316 engine, pump & mix system, 3000 gallon mud tank, (2) FMC pumps, mixing hopper, Harrisburg 3x4 pump  Price:  $82,500

500 BBL MUD SHAKER TANK(Ref#4355Ta)  62’L x 11’6”W x 7’H with three partitions, (2) 5 x 6 centfifugal pumps powered by 75 hp electric motors, sandblasted and eopoxy painted 2013

300 BBL MUD SUCTION TANK(Ref#4355Tb)  55’L x 11’6”W x 7’H with three partitions, (2) 5 x 6 centfifugal pumps powered by 75 hp electric motors, sandblasted and eopoxy painted 2013

NEW USA BUILT 500 GALLON MUD MIXER(Ref#14777T)  3” multiquip mixing pump, gast mixing for gel and kentonite grouts, fork pockets, skid mounted, dual mxing funnels, can mix 500 gallons in 1.5 minutes  Price:  $13,500

MUD SYSTEM(Ref#11973T)  Gardner Denver PAH triplex pump, 450 hp Cat engine, 40 kw gen set, 500 gal fuel tank, hight lights, covered operator’s station, approx. 20 bbl mud pit with mixer, shaker, mounted on 2007 Transcarft 100k trailer, very good clean unit  Price:  $138,500

2002 REVERSE CIRCULATION MUD CLEANING SYSTEM(Ref#8379Ta)  4500 gallons, (2) 4 x 5 scalping shakers, (1) 4 x 5 linear desilting shaker, 5 x 6 centrifugal desilting pump (800 gal per minute capacity), 5” desilting cones, (2) additional tanks available which will provide 20,000 gallon circulation system, semi-mounted with air bag suspension (extra axle comes with unit)  Price:  $165,000

2002 MUD CLEANING SYSTEM WITH CENTRIFUGAL DESILTING PUMP(Ref#8379Tb)  direct rotary circulation 4500 gallons, (2) linear shakers (600 gal – scalping and desilting), 5 x 6 centriugal desilting pump (800 gal per minute capacity), 5” desilting cones, 5 x 6 Mission Sandmaster pickup pump, all electric with control panels and lighting, mud mixers, semi mounted  Price:  $190,000

BROCK DIRECT CIRCULATION CUSTOM MUD CLEANING SYSTEM(Ref#8376Ta)  2000 gallon, (2) deck shaker/scalping and desilter (500 gpm capacity), (2) 3 x 4 centrifugal pumps (500 gpm capacity), 5” desilting cones, electric powered pumps, 75 kw Onan gen set with Tier 3 Cummins engine (low hours), all electric with control panels, mud mixer, Mission Sandmaster electric pickup pump, outriggers, trailer mounted. Low hours on entire unit  Price:  $140,000

DIRECT ROTARY CIRCULATION MUD CLEANING SYSTEM(Ref#8376Tb)  4500 gallons, (2) linear shakers (600 gallons – scalping and desilitng), 5 x 6 centrifugal desilting pump (800 gallons per minute capacity), 5” desilting cones, 5 x 6 Mission Sandmaster pickup pump, all electric with control panels and lighting, mud mixers, semi-mounted  Price:  $215,000

TULSA RIG IRON(Ref#14588T)  200 gpm, self contained with generator, (2) 2 x 3 centrifugcal pumps (one for mixing hopper qand the other to run (2) 5” desander cones, 3 panel screen shaker, 2400 gal tank, diesel engine, mounted on two axle trailer  Price: $29,500

RIG BUDDY MUD SYSTEM(Ref#14586T)  2 panel shaker, Honda 23 hp motor, 2 desander cones, self contained and portable (does not need a pick up pump to function)  Price:  $32,000

PORTABLE MUD SYSTEM(Ref#8096T)  4 x 4 mud pump, 100 gallon tank, 3 desanding cones, 45kw Cat gen set and power controls, mounted on tandem axle trailer, fully operational  Price:  $50,000

GDEP is the original creator of the drilling pump and continues to set the standard for durable, high-quality drilling pumps that can withstand the world’s toughest drilling environments. Starting with our PZ7 and rounding out with the market"s most popular pump, the PZ1600, our PZ Series of pumps are the perfect choice for today"s high-pressure drilling applications.

Mud pumps are the pumps deployed in the oil and gas industry, mainly to circulate drilling fluids and other kinds of fluids in and out of the drilled wells for exploration. The mud pumps transfer the fluids at a very high pressure inside the well using the piston arrangement. The number of pistons decides the displacement and efficiency of working of the mud pumps, originally only dual piston pumps and three-piston pumps were used, but the technological advancements have seen pumps with five and six pistons to come up. Currently the triplex pumps which have three pistons are used, but the duplex pumps having two pumps are still deployed in the developing countries.

Based on its types, global mud pump market can be segmented into duplex, triplex, and others. The triplex mud pumps will dominate the mud pump marking in the given forecast period owing to its advantages and ongoing replacement of duplex pumps with triplex pumps. Based on operation, the global mud pumps market can be segmented into electric and fuel engine.

The electric mud pumps will dominate the market during the given forecast period due to the advantage of eliminating the harmful carbon emission which is done in the case of fuel engine pumps. Based on its application, the global mud pumps market can be segmented into oil & gas, mining, construction, and others.

The major market driver for the global mud pumps market is the increasing exploration activities taking place in various regions of the world to satisfy the increased energy demand. The number of drilled wells has increased in recent years, which has certainly impacted the growth of the mud pumps market in both oil & gas and mining sectors.

Key market restraint for the global mud pumps market is the drift towards the cleaner sources of energy to reduce the carbon emissions, which will certainly decrease the demand for oil & gas and therefore will have a negative impact on the growth of the global mud pumps market.

Some of the notable companies in the global mud pump market are Mud King Products, Inc. Gardner Denver Pumps, Weatherford, Schlumberger, National Oilwell Varco, China National Petroleum Corporation, Flowserve Corporation, MHWirth, American Block, Herrenknecht Vertical Gmbh, Bentec GmbH Drilling & Oilfield Systems, Drillmec Inc, Sun Machinery Company, Shale Pumps, and Dhiraj Rigs.

The global mud pump market has been segmented into North America, Europe, Asia Pacific, Latin America, and Middle East & Africa. Owing to the well-established production sector and stable exploration industry North America holds the largest market for the mud pumps. The onshore exploration activities of oil & gas have increased at a good rate in the North America region, which has certainly boosted the growth of the mud pumps market in the region.

The demand from Europe and Asia Pacific has also increased due to exploration activities in both the regions owing to the increased energy demand. The energy demand specifically in the Asia Pacific has increased due to the increased population and urbanization. The Middle East and Africa also hold significant opportunities for the mud pumps market with increased exploration activities in the given forecast period.

In August 2018, Henderson which is a leading company in sales and service of drilling rigs, and capital drilling equipment in Texas signed a contract with Energy Drilling Company for the purchase and upgrade of oil field equipment’s which included three 1600hp × 7500psi mud pumps. This will be the first refurbishment completed at Henderson’s new service center and rig yard.

In January 2018, Koltek Energy Services launched the 99-acre facility for the testing of the oil field equipment in Oklahoma. This will allow the oil field equipment manufacturers to test their equipment at any given time. The company has deployed the MZ-9 pump which has a power rating of 1000Hp.