fairbanks morse mud pump supplier

Continental Emsco Drilling Products, Inc., which consisted of Emsco drilling machinery and Wilson mobile rigs, was purchased by National-Oilwell, Inc on July 7, 1999. To our knowledge, no pumps have been manufactured and sold under the Emsco brand name since National-Oilwell acquired them.

Fairbanks Morse pumps are currently manufactured in Kansas City, Kansas. Fairbanks Morse is a division of Pentair ever since August, 1997 when Pentair purchased the General Signal Pump Group.

Gaso pumps are manufactured by National Oilwell Varco. Gaso was acquired as "Wheatley Gaso" by National-Oilwell in the year 2000. At the time, Wheatley Gaso was owned by Halliburton.

Skytop Brewster pumps are no longer available as new pumps. Skytop Brewster(Cnsld Gold), a unit of Hansen PLC"s Consolidated Gold Fields subsidiary, was acquired while in bankruptcy by National-Oilwell, Inc. in November, 1999.

Major Turbine has been distributing Fairbanks Morse for over 10 years. During this time, the Pentair pump company purchased several of the Layne bowls and began to offer them as Fairbanks branded product. With the Layne product line being incorporated into the Fairbanks offering, we now can offer over 50 different sizes of line shaft turbine.

ISO 9002 certified distributor of a wide range of pumps & related process equipment including: diaphragm, progressive cavity, Leakproof canned motor centrifugal, Hastelloy C process centrifugal, corrosion resistant gear, epoxy, internal gear, Hydra-cell high pressure diaphragm, centrifugal, Iwaki centrifugal, modular drum and container, centrifugal, side channel & vertical inline, centrifugal & multi-stage centrifugal. Custom manufacturer of fiberglass sump & spill-stop pumps. Services include pump repair, re-building industrial mechanical equipment to factory standards & dynamic balancing. UL certified for rebuilding Class I, Group C & D, Division I, XP equipment. Factory authorized service for most products.

Distributor of engineered fluid handling pumps, packaged pumping systems, repairs, parts, & integrated pump control systems. Mud pumps, chiller/condenser pumps, plumbing pumps, boiler feed systems, in-line circulators, condensate systems, sump & sewage pumps, end suction pumps, submersible sump & sewage, non-clogs & grinders, self primers, packaged lift stations, variable speed pump systems, metering pumps, chemical injection systems, chemical mixing systems, peristaltic pumps for chemical feed, high viscous & shear sensitive fluids, self primers, stainless steel, trash pumps, hot oil pumps, vertical turbine pumps, sanitary pumps, marine pumps, industrial pumps, ANSI end suction, vertical cantilever, double suction, non-clogs, progressive cavity pumps, helical gear pumps, well pumps, lab pumps, hose pumps, control valves, check valves, air release valves, tanks, pressure vessels.

Periodically we"ll inspect for wear, cracks and damage to critical components such as bearings, bull gear and pinion, conrods and crossheads. We"ll check the condition of your seals and other rubber goods and look for oil contamination. We"ll inspect your frame and ensure your pump is set up as per the manufacturer"s recommended tolerances, providing feedback and detailed reporting.

TSC mud pumps and drilling mud pumps. We can rebuild all TSC parts including the fluid end, power end, stuffing boxes, plungers, seals, bearings, diesel engines, and natural gas engines. We also have blasting and painting facilities as well as a machine shop. We have many years of experience rebuilding mud pumps

Where TSC overhaul is required we"ll take care of complete disassembly, cleaning and NDT. Repairs will be made to machined components as necessary. Bearings, seals and other components will be replaced in line with our inspections. Motors will be overhauled, lube systems serviced and pulsation dampeners recertified. We"ll also check your fluid ends are in spec and can repair or replace. Your pump is then fully reassembled and commissioned.

Periodically we"ll inspect for wear, cracks and damage to critical components such as bearings, bull gear and pinion, conrods and crossheads. We"ll check the condition of your seals and other rubber goods and look for oil contamination. We"ll inspect your frame and ensure your pump is set up as per the manufacturer"s recommended tolerances, providing feedback and detailed reporting.

Emsco parts including the fluid end, power end, stuffing boxes, plungers, seals, bearings, diesel engines, and natural gas engines. We also have blasting and painting facilities as well as a machine shop. We have many years of experience rebuilding mud pumps

Where Emsco overhaul is required we"ll take care of complete disassembly, cleaning and NDT. Repairs will be made to machined components as necessary. Bearings, seals and other components will be replaced in line with our inspections. Motors will be overhauled, lube systems serviced and pulsation dampeners recertified. We"ll also check your fluid ends are in spec and can repair or replace. Your pump is then fully reassembled and commissioned.

Mud pump supply continually flow rate of fluids. Mud pump use in industries like petrochemicals and construction for different applications like oil and gas drilling rig, water bore drilling, horizontal directional drilling.

Microfluid process equipment also provides onsite and offsite service and maintenance of the Mud pumps. We assure our customer for on-time spares supply and better after-sales service and support. Microfluid supply replacement spares and service for all makes mud pumps like Gardner Denver, Gaso, Fairbanks Morse, Halliburton, Ideco, Aplex, and many others.

Fairbanks Nijhuis offers the industry’s most complete set of solutions, products and services to municipal and industrial customers. A wide variety of pumps and controls serve multiple markets to support a range of needs. Fairbanks Nijhuis also delivers professional services including installation, maintenance, repair, and training. Manufacturing operates primarily out of Kansas City, KS, USA and Winterswijk, The Netherlands. The combination of our two world-class engineering and manufacturing groups, with over 200 years of combined expertise, is a win for our customers around the globe.

Our manufacturer Mud Pump skid is suitable for operations in rough, windy, damp and dusty oilfield conditions. Dependent upon customer horsepower requirements the engine sizes will vary.

Fairbanks Morse Defense (FMD) has finalized an agreement to serve as the exclusive services provider for Buffalo Pumps, a division of Air and Liquid Systems Corporation. Buffalo Pumps has been a quality manufacturer of centrifugal pumps since 1887 for the global maritime defense and commercial markets. The agreement combines more than a century of expertise from these two industry leaders to expand service capabilities for the U.S. Navy, Military Sealift Command and U.S. Coast Guard customers.

“Fairbanks Morse Defense understands that our work means more than supporting well-maintained, high-performing ships. Our customers require a service partner who can deliver superior service with zero compromises in safety or quality,” said Jamie McMullin, President of FMD Services. “Through our collaboration with Buffalo Pumps, we bring added value to our customers with the ability to deliver rapid, local, OEM expertise and complete turnkey service solutions for a broader range of mission-critical systems.”

Based in North Tonawanda, New York, Buffalo Pumps has established itself as a premier pump manufacturer, with most of its customers representing the defense and commercial sectors. Through this agreement, Buffalo Pumps will have access to FMD’s global network of highly trained field service technicians and the defense contractor’s strategically located service centers to provide service and overhaul solutions for the company’s maritime defense customers.

“Fairbanks Morse Defense’s extensive field service network and focus on supporting naval customers will provide unparalleled support to our customers when and where they need it,” said David Anderson, President of Air and Liquid Systems Corporation. “FMD shares our values regarding delivering superior customer service, and we are confident this agreement will provide tremendous value to our Buffalo Pumps customers.”