how to use a drywall mud pump pricelist

Drywall mud pumps are essential if you are going to use automatic taping tools. Typical drywall pumps are simple lever action pumps that sit in a five-gallon bucket of mud. They have about a three-inch tube that reaches to within a couple of inches of the bottom of the bucket and sucks drywall mud from the bottom.

The spout on these pumps is approximately 5/8" in diameter and located at the base of the lever which sits near the top of the five-gallon bucket. The spouts also come with a small metal tube flattened on one end that serves as an adapter to fill taping boxes. You can also attach a gooseneck to the spout which allows you to fill a drywall bazooka with drywall mud.

Drywall pumps should never be used with hot mud, or quick set drywall mud. Quick set drywall mud hardens by means of a chemical process, therefore it can easily harden inside of the pump before you have a chance to clean it out.

There are pneumatic drywall pumps on the market as well. They are usually sold in conjunction with specific tools. For example, the "Apla Tech" taping system is centered around a pneumatic pump system.

There are not many reasons to invest in a drywall pump if you plan on using no more than basic taping tools like pans and knives. However, if you choose to invest in automatic taping tools including flat boxes, angle boxes, a bazooka, the mud runner or any of these types of tools, you will need to make sure you have a reliable drywall pump.

When it comes to drywall tools, a compound pump is a workhorse that keeps all drywall finishing and taping tools moving. So, what makes a good drywall pump? Here"s LEVEL5 founder Scott Murray with an overview (or read on to learn more).

LEVEL5’s drywall compound pump has been made to meet finisher’s demand forreliability, affordability and workability. This beast of a taping tool is built to withstand years of heavy use.

We specifically chose to construct our pump out of billet aluminum (instead of less-durable cast aluminum) to give it as rock-solid a build as possible. Using advanced anodization technology, we’ve designed our compound pump to feature outstanding corrosion resistance. This same anodization also makes it more resistant to everyday wear and tear.

The body of the LEVEL5 mud pump is longer to make it compatible with more bucket sizes. Its composite cup seal is designed to be longer lasting than traditional rubber seals used by other major brands. To effectively minimize pump priming we"ve added a precision-molded flapper valve and seal assembly.

The build quality, attention to innovation and 7-Year warranty make this pumpunrivaled in terms of value to the finisher. Combine these with the fact that LEVEL5’s compound pump is among the most affordable on the market and it’s easy to see why our taping tools are setting the industry standard for finishers far and wide.

This drywall mud pump has been built to last, comes ready to go right out of the box and is innovated to fit any drywall finisher’s workflow. We’ve gone above and beyond to make our pump the most workable on the market.

No doubt the ability to clean, repair and maintain your drywall tools plays a big role in which taping tools you choose to invest in. We’ve built the LEVEL5 drywall pump to be extremely easy to take apart and rebuild thanks to heavy-duty grenade pins and easy-release latches on its tube and handle.

To help make tool maintenance second nature, we’ve created a built-in wrench mount to ensure quick access to your wrench that comes included with every purchase of a LEVEL5 drywall compound pump. Once you’ve mastered how to take apart and maintain your pump, you’ll never be without one on the job.

To help ensure that your LEVEL5 mud pump is ready to go right out of the box, we include afreebox filler valvewith every purchase. This filler valve is quickly and easily swapped out with our gooseneck so that you can go from filling flat boxes to filling your automatic taper seamlessly.

It’s important to note that the LEVEL5 drywall compound pump is not compatible with goosenecks from other manufacturers due to the pump’s extended length. The LEVEL5 Gooseneck (4-714) has been specifically designed for use with this pump.

Here at LEVEL5 we know you want a pump that’s dependable, affordable and easy to maintain. Our pump’s innovative design features, premium build materials and 7-Year warranty provide unsurpassed value to the finisher.

When you choose to sign up and pay with Klarna, you can split your purchase into 4 manageable payments and spread the cost of your tool purchase over time. Simply enter the credit or debit card of your choice for automatic payments every two weeks. No interest or added fees when you pay on time!

Add item(s) to your cart and when ready click "Checkout". You can then apply for easy monthly financing directly as part of the checkout process. A simple, 2-step application will provide an instant approval decision. Only basic information at the checkout, so you can complete your purchase with full transparency. It’s the simplest one-time sign-up process you’ve ever used.

Klarna is one of the largest pay-in-4 financing firms in the world. It uses the latest safeguards and security to protect your information and prevent unauthorized purchases.

See all of your purchases in one place, pay any open balances and much more in the Klarna app. At any time you can also log into your Klarna account at https://app.klarna.com/login.

What"s equally as important as your automatic taping and finishing tools? You need a reliable mud pump. The drywall compound pump, or mud pump, is necessary to quickly fill your automatic tools such as a flat box or automatic taping tool, and keep the job moving with minimal delay. Without a reliable pump, you’ll be spending more time fiddling with a pump that is difficult to clean, or worse, resorting to hand-filling your tools, which is time consuming, and counter productive.

No pump = no tools, so you need a workhorse that will withstand a lot, and get through your workday, every time. TheLevel5 Drywall Compound Pumpis constructed of billet aluminum, making it much stronger, and more durable than your typical cast aluminum construction.

Another important quality is resistance to corrosion. Tools built of poor quality and materials are prone to rust and corrosion. The anodization on the Level5 Drywall compound pump makes it highly resistant to corrosion, as well as wear and tear!

A good seal is important too! Typically for compound pumps, a rubber seal is used, but the problem with rubber is that it will slowly deteriorate, and before you know it, you’re leaking all over the place. The Level5 Drywall Compound Pump uses a composite urethane cup seal, which provides much longer wear life vs. the traditional rubber seals.

Working with mud can be messy, and when you’re on the job, it"s important to be able to easily clean and maintain your compound pump. You should not be spending any extra time fiddling with small screws or components to clean your pump, or to switch valves.

That’s why the Level5 Compound pump has easy clean features, like grenade pins and easy-release latches on its tube and handle. It also comes with a wrench, and a built-in wrench mount so that you are always prepared to switch from gooseneck to box-filler valve, or make a quick adjustment with ease.

Theoretically, yes you can, but it"s a slow process, and at which point you may be better off hand finishing, as you will impede the speed of the work. The combination of your automatic tools and your mud pump will pay for itself fairly quickly by the speed and quality job that you can achieve.

We think the Level5 Drywall Compound Pump is the best drywall mud pump on the market, and truly the underestimated workhorse in the arsenal of any professional drywall finisher. LEVEL5’s drywall compound pump has been made to meet finisher’s demand for reliability, affordability and workability. This beast of a taping tool is built to withstand years of heavy use. In fact, the Level5 compound pump has been tested for over 250,000 cycles without the need or repair, or replacement parts.

If you’re interested in purchasing a compound pump, you can find more information here. And as always, feel free to email, or give us a call and we’d be happy to provide more information!

*TAXES ARE NOT INCLUDED. Must have an approved AMES Account for all tool rentals. Prices provided are based on the tools shown in each set for the length of the contracts provided (8-, 16-, 30-, 60- or 90-days). Customers are responsible for the full amount of the contract agreed upon at the store regardless of early return. If tools are not returned at end of contract, customers will be charged the respective daily rates until returned. See store for full rental contract details.

Australia, Austria, Bahamas, Bahrain, Bangladesh, Barbados, Belgium, Bermuda, Bolivia, Brazil, Brunei Darussalam, Bulgaria, Cambodia, Canada, Cayman Islands, Chile, Colombia, Costa Rica, Cyprus, Czech Republic, Denmark, Ecuador, Egypt, Estonia, Finland, France, French Guiana, Germany, Gibraltar, Greece, Guadeloupe, Guatemala, Guernsey, Honduras, Hungary, Iceland, Indonesia, Ireland, Israel, Italy, Jamaica, Japan, Jersey, Jordan, Kuwait, Latvia, Liechtenstein, Lithuania, Luxembourg, Macau, Malaysia, Maldives, Malta, Martinique, Mexico, Monaco, Netherlands, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Poland, Portugal, Qatar, Republic of Croatia, Reunion, Romania, Saudi Arabia, Singapore, Slovakia, Slovenia, South Africa, South Korea, Spain, Sri Lanka, Sweden, Switzerland, Taiwan, Thailand, Trinidad and Tobago, United Arab Emirates, United Kingdom, United States, Vietnam

Glancing around a home, visitors take in the artwork, photographs, furniture, and even the paint color. The finish on the walls and ceilings underneath the paint doesn’t necessarily draw the eye—unless it’s cracked, slumped, or poorly patched. Drywall is the foundation of most modern walls and ceilings and the replacement product of choice for many older homes. A well-installed smooth or textured surface lets the furnishings and decor in any home shine.

Whether a homeowner is choosing a qualified contractor or learning how to hang drywall themselves, they’ll want to begin with an understanding of the different types of drywall available, the many factors that affect the overall cost of drywall, and the supplies needed to install it. How much does drywall cost? According to Angi and HomeAdvisor, the typical cost of drywall itself is between $12 and $20 per panel, with a national average of $15. Some additional costs are obvious, such as the ones for panels, screws, tape, mud, and joint compound, but other components, such as demolition, transportation, permits, and even the volume of sandpaper needed to get the job done well, might escape notice. In addition, there are several types of drywall available that can provide soundproofing, waterproofing, and fire resistance, along with more basic styles that support tile or shiplap walls. A variety of finishes can complement the style of the home and reduce the cost overall. To make these decisions easier, it’s a good idea for homeowners to calculate the cost of drywall panels and installation.

Calculating the overall cost of installing drywall in a home is a straightforward formula, but it does include a number of variables and decisions on the part of the homeowner. The following formula can help a homeowner calculate the amount of drywall needed for a project and the total cost.Measure the square footage (width times height) of the area that needs to be drywalled, then divide by 32 (if using 4-by-8-foot sheets) or by 48 (if using 4-by-12-foot sheets) to determine how many panels of drywall will be needed.

On average, it will cost between $200 and $300 to purchase enough drywall panels for a 12-foot-by-12-foot room. There are, of course, additional factors in calculating the overall material costs, including the number of odd cuts that create additional waste, corners, and the type and thickness of the panels themselves, but this formula should provide homeowners with a good estimate of how much material they’ll need to get started. It may also be useful for homeowners to plug these numbers into an online drywall calculator for a specific estimate.

While the math of calculating drywall cost is relatively easy to do, there are significant variables in the figured cost of hanging drywall in any given space. Because drywall is used in so many different areas of the home, there are varieties in the shape, thickness, and additional materials incorporated into the panels that create a wide cost range. In addition, regional considerations, including local construction booms, weather and transportation concerns, and even the season, can affect local pricing to make it vastly different from the national average drywall cost. There are some concrete factors, however, that are determined by the homeowner and provide an opportunity to save a little money.

Drywall panels come in standard sizes of 4 feet by 8 feet or 4 feet by 12 feet. Depending on the size and dimensions of the room, one panel size may be more efficient for the space and will create less waste than the other. While 4-by-12-foot sheets are a bit more expensive, the homeowner may need fewer sheets overall if their ceilings are high, which can save money along with time needed for cutting and taping.

The location where drywall is being installed will affect the overall cost. This is due to both the square footage of the room and the type of drywall that will be used. The cost to drywall smaller rooms, such as bathrooms, is lower overall—between $430 and $500—but the price per square foot may be higher. Often, green or purple boards are used instead of standard drywall for bathrooms because they are more moisture-resistant, and this can increase the cost. A room with larger square footage, such as a living room, will cost about $960 to $2,800 to drywall. The cost per square foot for basements and garages may be less because these areas are not typically finished with the same high-quality materials that are used for living spaces.

Drywall is available in four thicknesses: ¼ inch, ⅜ inch, ½ inch, and ⅝ inch, with cost increasing with thickness. The cost for ¼-inch drywall is about $10 to $12 per sheet, and this type is mostly used for repairs to fortify existing walls. The cost of ⅜-inch drywall can run up to $15 per sheet; this type is mostly used when ½-inch drywall is too large for an existing space. Half-inch drywall is ideal for almost all spaces and can cost anywhere between $10 and $20 per sheet. The thickest drywall is ⅝ inch, and this type is almost exclusively used for soundproofing. It costs about $13 to $75 per sheet. Choosing the correct thickness for the project can help lower the overall cost.

Depending on the application of the drywall, hiring a qualified professional drywall hanger may be the best bet. Hanging and finishing drywall are two separate costs: The average cost to hang drywall is $0.15 to $0.65 per square foot. Taping and mudding drywall after it’s hung can range from $0.40 to $0.70 per square foot, while sanding and priming costs between $0.10 and $0.50 per square foot. The cost to finish the drywall ranges from $0.50 to $1.15 per square foot. Combining these costs gives a total drywall installation cost range of $1.15 to $3 per square foot.

Drywall finishing is rated from level 0 to level 5. What follows are the finishing ratings and their typical costs.Level 0. A level 0 finish job means the drywall is screwed into the studs: No mudding or taping has been done. This service costs between $0.30 and $0.80 per square foot.

Level 1. Level 1 includes mudding and taping the seams and costs between $0.70 and $1.50 per square foot for labor. Level 1 is not a complete finish and is common for attics and basements.

Level 2. Level 2 adds a skim coat of joint compound. This finish is not usually suitable for a living space, but it’s more complete than a level 1 finish. Level 2 finishing costs $0.80 to $1.75 per square foot.

Level 4. Level 4 results in drywall that is smoothed, sanded, and primed, but it may have surface imperfections. This finish is a good base for tiling or wallpaper, but is also suitable simply for painting. Level 4 finishing costs between $1 and $3 per square foot.

Level 5. A level 5 drywall finish includes a full, smooth coat of joint compound over the entire wall along with primer that has been sanded. The drywall is ready for even glossy paint, as there are almost no imperfections. Level 5 finishing costs $1.15 to $3.50 per square foot.

Each degree of finish adds to the total cost of installation. If a homeowner prefers a hand- or spray-finished texture, such as rosebud, swirl, skip trowel, or orange peel, these can be added prior to a level 5 finish, which can reduce overall finish costs. These textures will add to the finishing cost, however, as they add to material and labor costs.

Drywall prices can vary greatly depending on a homeowner’s region of the country. Prices tend to be lower in midwestern states. For example, prices in Ohio range from $7.85 to $12.10 per panel, whereas homeowners in California will pay between $11.85 and $19.80 per panel. On the East Coast, drywall costs average about $10.35 to $17.50 per panel.

Surprisingly, it can be more expensive per square foot to drywall a small room than a larger one. Covering a larger area provides more opportunities to use full sheets or scraps to fill interrupted walls, so the overall cost drops. It is least expensive when homeowners decide that hanging drywall in the entire house all at once is the best plan. But the cost isn’t only dependent on the total area mathematically: The number of cuts, fitting, and level of finish will also play into the total. Use (and therefore cost) of finishing materials will increase with a higher number of corners and specialized cuts, as corners require a special bead to be tidy. In addition, some drywall contractors may charge a minimum service fee, which could exceed the actual cost of installing drywall in a small space, so bundling several rooms into one project may help you save overall. This fee may also apply if only a small portion of existing drywall is being patched, which costs about $100 on average.

Having established the cost of the drywall materials needed for a project, homeowners may think they know how much they’re budgeting and are ready to head to the home improvement store to get started—but there are other cost considerations to factor in first.

A cost that many homeowners forget to include is the demolition cost of walls that are being removed and replaced. While some popular home shows make this part of the job seem like a fun, stress-reducing exercise that employs the strength of a hammer, in real renovation scenarios, it’s critical to be careful: Repairing damage to electrical outlets, wiring, plumbing, and other home system components in the wall will add significantly to the overall cost. For a non-load- bearing wall, demolition can cost as little as $1,200, but for load-bearing walls that require the rerouting of systems, it can cost as much as $5,000.

For new walls, or walls on the exterior of the home that have been fully removed prior to the new drywall being added, homeowners will need to include the cost of materials and installation of insulation to maintain the energy efficiency of the building. Depending on the type of insulation the homeowner chooses, costs can range from $0.65 to $6.50 per square foot.

Applying texture to drywall is a simple way to add visual interest to a room. Texture can be applied to both walls and ceilings in a wide variety of styles depending on the homeowner’s preference. Some textures like Santa Fe and skip trowel have a rustic appearance that is similar to stucco and can be applied by hand. The cost for hand-applied textures is between $1.50 and $2 per square foot. Knockdown and orange peel textures are more subtle and can be applied with a spray. Spray textures are more affordable since they are quicker and easier to apply, and these cost between $0.50 and $1 per square foot.

Drywall panels are available with water resistance, waterproofing, soundproofing, and with and without paper—there is a type of drywall for almost every application, and the costs vary significantly based on which additional features are required.

Do homeowners need a permit to add or replace drywall? In the case of a simple replacement to clean up a damaged wall, probably not. If the drywall project involves plumbing, electrical work, or a load-bearing wall, or if the location of a wall will change, it’s important for homeowners to check with their local municipality to see if a permit and inspection are required.

Any homeowner living in an older house has likely learned to ask the asbestos question before disturbing existing materials. Asbestos can be present in older plaster walls, tile, and tile adhesive, especially in homes built before 1980, and it can cause serious illness and lung damage if it’s released into the air and inhaled. For homes built before 1980, it’s important to assess the likelihood that asbestos is present, test for it, and have it removed (at a cost of $1,200 to $3,000) before proceeding.

Drywall is a catchall term that many people use to describe any wallboard product. However, as drywall has become the standard product for wall and ceiling installations, additional styles and formulations have been developed to meet the needs of different purposes and spaces. Each additional component adds to the cost per panel, but it’s important to choose the best panel for the space in which it will be installed.

Regular drywall, which is gypsum board sandwiched between two paper layers for stability, is the least expensive option. It’s fine for most bedroom, living room, and dining room walls where moisture resistance is not a key concern. The price per panel will vary based on the panel size and thickness, but it ranges from $15 to $20.

Green board drywall adds an extra layer of green material on the outside surfaces of the board, making it water-resistant. Ideal for areas in the home where moisture may be a concern, but not for walls that need to be completely waterproof, green board is often used in kitchens or where it will be covered with tiles and grout. Green board comes in a standard 4-by-8-foot size, and costs range from $14 to $18 per panel.

Blue board drywall uses a different kind of paper to sandwich the gypsum. The blue paper has a smoother finish that holds finish plaster on top, allowing the installer to build a perfectly smooth, seam-free finish. It should not be used with mud, tape, and joint compound. Prices range from $12 to $15 per panel.

While green board drywall has some moisture resistance, purple drywall offers superior moisture and mold resistance, making it even more effective in situations where dampness, moisture, and water contact may be factors. It can be used in all wall and ceiling applications, but it’s especially effective in moist conditions. Some purple board includes soundproofing and additional fire resistance, so it’s important that homeowners know exactly what they or their contractors are purchasing. Cost ranges from $15 to $60 per panel.

Paperless drywall is a newer addition to the drywall range. Covered with fiberglass instead of paper, this option protects the gypsum core from rot, moisture, and mildew and makes the board less likely to break and dent. It retains the texture of the fiberglass on the outside, so it may require additional joint compound to achieve a smooth finish. There are paperless versions of the different variations of drywall, so costs will likely be at the higher end of each range. On average, paperless drywall costs $25 to $35 per panel.

Type X is fire-resistant drywall. All gypsum board is by nature somewhat resistant to fire, but Type X features a denser pack of gypsum and noncombustible fibers. It is heavier and harder to cut. It comes in ⅝-, ½-, and ¾-inch thicknesses, but the ¾-inch size can be difficult to find. To achieve Type X certification, a ⅝-inch board has to meet a 1-hour fire-resistance rating, and a ½-inch board must meet a ¾-hour rating. Type X can be layered for additional resistance, which also adds soundproofing. Ideal for garages and basements, along with applications in buildings that must meet certain building codes, Type X drywall ranges from $20 to $30 per panel.

While the density of all drywall panels offers some soundproofing, choosing a board designed to be soundproof adds an extra layer of defense against noisy neighbors, televisions, construction work-related sounds, and more. Soundproof drywall, which is often used in music rooms, between apartments, and in other places where noise is a problem or silence is required, is a laminated drywall that includes wood fibers, gypsum, and other polymers to reduce sound transfer. It is a dense product that can be difficult to work with, but it achieves a quieter atmosphere. The cost per panel ranges from $40 to $55.

Eco-friendly drywall is characterized by its recyclability and high content of post-consumer materials. Usually made from gypsum, eco-friendly drywall is lightweight and durable. The cost of eco-friendly drywall is around $19 to $27 per panel.

For homeowners who are considering a remodel or removing or adding walls to their home, the options can seem overwhelming. For those living in older homes, the first instinct may be toward plaster, as it is a traditional and attractive finish. Modern drywall, however, is significantly less labor-intensive to install and is generally easier to maintain. It can even add energy efficiency to the home.

Drywall is relatively easy to install. The boards are cut, then screwed into wall studs. Tape and joint compound are applied over seams and screws, then sanded. While it takes practice and skill to get the taping just right, it can potentially be a DIY project for experienced homeowners. Plaster, on the other hand, requires specialized building experience to attach the wood laths to the studs. Then layer after layer of plaster must be applied to the lath and finished. When comparing drywall vs. plaster, labor costs alone can be more than three times than those to install drywall. While plaster can be a great option for a single wall repair if the other walls remain intact, drywall is the easier path to take for larger or whole-room projects, and once painted, most people won’t know the difference.

Whether they are dented and scratched during a move, discolored by water exposure, or dotted with holes from nails, walls are bound to undergo damage during their lifetime. Drywall repair is generally affordable, which is a significant advantage. Small dents or holes can be filled with spackle and repainted. Even major damage is easy to repair by simply replacing the affected panels. Drywall repair costs by a professional are relatively affordable, and some homeowners may even be able to do the repairs themselves.

Layers of paper, gypsum, and other fibers give drywall outstanding energy efficiency. When used in the walls of homes and apartments, it can keep interiors cooler in the summer and warmer in the winter, and thus help keep energy bills down.

Gypsum is naturally fire-resistant, which can help prevent fire from spreading from room to room. In addition, the insulation properties of drywall can keep the heat from spreading through the walls. Drywall can keep fires from spreading and buy occupants valuable time to get out, get help, and extinguish the fire before it damages more of the home’s structure.

The many varieties of drywall offer benefits for different applications. Whether the homeowner is looking for waterproofing, soundproofing, fireproofing, or dent resistance, there are choices that make it easy to pick the right drywall for each installation. In addition, a skilled contractor can add hand finishes or spray finishes to the drywall, allowing homeowners to choose distinctive textures and finishes for a truly custom product.

Jobs such as installing, maintaining, and repairing drywall are some of the most affordable that can be done on the home. The ability to replace or repair small sections without extensive finish work keeps the maintenance costs down, and the costs of drywall materials themselves are on par with, or less than, the costs of plaster and other options. The installation costs can be minimal for a DIYer, and even hiring a professional to do the job is generally more affordable than the cost of the more labor-intensive plaster workers.

For some handy homeowners, figuring out how to hang drywall is a task that can be done to completion: Measuring, cutting, and screwing the boards into the wall isn’t intrinsically difficult. However, figuring out how to install drywall effectively is a different challenge. Taping looks simple on television, but determining how much mud to scoop onto a trowel and achieving the exact correct wrist angle to smooth it down, leaving just enough on the wall to seal the tape but not so much that it never dries, is a skill developed through years of experience. This is also true for smoothing a coat of joint compound across a wall without leaving seams and ridges. A professional will help make the process more efficient, which will result in a more polished product.

While a homeowner may know a few basics of how to fix drywall, larger-scale work is often better left to a professional. Large holes or water damage require heavy-duty repairs beyond patching and spackling. Drywall cracks and large gaps should not be ignored, as they can be indicative of a shifting foundation. A professional understands these warning signs and will have advice on how to proceed. Homeowners will also want to consider that drywall panels are heavy; this is especially true for ceiling installations, and special equipment may be necessary to support the materials. With the money saved by avoiding repeated trips to the home improvement store for more drywall tools, homeowners may find that hiring a professional to complete the installation is less expensive than a DIY approach.

While drywall is one of the most affordable options to finish walls and ceilings, the cost is not insignificant. Because there are so many choices in terms of type of board, installation options, and finishes, there are some ways the savvy homeowner can bring the overall cost down.Budget and estimate carefully from the beginning. Buying all the supplies at once may earn you a discount, and hiring electricians or plumbers ahead of time can be less expensive than an emergency call.

Purchase supplies from a drywall supplier instead of a big-box store. Drywall suppliers know their products, can help you estimate better, and will often reduce the price for a bulk order. In addition, this approach means you’ll likely spend less on impulse purchases at a home improvement store.

Don’t opt for the cheapest material. Even though it will save money up front, low-quality drywall will need to be repaired or replaced much more frequently. The cost will catch up with you eventually.

Remove the existing wall surface yourself. This can save money on demolition if you are confident that your walls do not involve asbestos or lead paint. Do this carefully and slowly, with awareness of electrical and plumbing components that may be behind the walls. If you know how to cut drywall and have the best tools to cut drywall, consider doing the hanging yourself and hiring a pro to handle the rest.

Choose a textured finish over a smooth one. There are several levels of finish, and a perfectly smooth finish is more expensive than a mildly textured one.

Ask the contractor about taping options. Standard seaming tape is less expensive than self-adhesive tape, but the seaming tape can require more layers of compound, which can ramp up the cost.

As homeowners are researching “drywall contractors near me,” they’ll want to look for someone who has specialized in drywall for a long time. An experienced drywall company will be able to provide more accurate estimates and will help the homeowner avoid the markup a general contractor can add to a smaller project. It’s important for homeowners to request a written contract and ask some questions to help keep the cost as close to their budget as possible.Does your estimate include the costs of transportation, demolition and preparation, materials, cleanup, and removal of dust and debris?

There are so many components to the cost of drywall that it can become overwhelming. The answers to these frequently asked questions can help homeowners zero in on how to best plan their drywall installation project.

Drywall is an affordable, energy-efficient option for walls and ceilings that provides natural fire resistance and soundproofing. It’s easy to customize for the location in the home and to have the style and texture the homeowner wants. Drywall is easily painted and repainted without a lot of prep work, or it can be used as a strong foundation for tile or shiplap walls.

Drywall panels should never be snugged up against each other. Like all other porous building materials, they need space to expand and contract with heat and cold and to accommodate shifts and settling of the structure. A standard ⅛-inch gap between panels will be hidden from view by tape and mud but will reduce buckling and cracking after the job is done.

Drywall walls and ceilings last between 30 and 70 years. A quality installation with offset seams and good taping sets up a long-lasting job. House settling can occasionally cause cracking. Water leaks, damage, or excessive holes from wall hangings can weaken the structure of the board itself and of taped and mudded joints. Prompt repair of this kind of damage along with any cracks will extend the life of the wall.

Sheetrock is a brand of drywall produced by United States Gypsum Corporation. In other words, all Sheetrock is drywall, but not all drywall is Sheetrock.

Plaster was commonly used in homes until around the 1940s, and it’s made up of wooden slats that are coated with plaster. Plaster is generally considered to have a more polished look, but it is pricier and more difficult to install than drywall.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Our new All-Weather Washout is designed to stand up to the toughest of environments while maintaining its portability, ease of setup, and cost effectiveness. It is made from heavy-duty, woven poly propylene that shrugs off the worst of climates but is still light weight and durable. The 4x’4′ includes a 5 to 1 safe working load lifting straps and an attached rain fly. The 6’x6′ includes 1 to 1 safe working load lifting straps with a detached rain fly available. Both fold flat for easy storage and transportation.

It is designed to be a portable, EPA-friendly solution for containment of hazardous construction site washout material such as concrete sediment, paint, drywall mud, stucco, and mortar. At a job site, the last thing you want to worry about is setting up a complicated washout for equipment and tools. Our All-Weather Washout, like our Corrugated Washout, is simple to deploy but can sit on your job site through the duration of your project and the worst weather you can encounter. Its patent pending folding design allows it to be stored flat in the back of a pickup truck or strapped to the side of a mixer or pump truck.

Toolriver will help facilitate the return of defective product(s) to the manufacturer for repair or replacement at no cost to our customer with in the first year, unless otherwise specified. For Refurbished and Clearance items this period is thirty (30) days, unless otherwise specified.

Physical damages, modifying, altering or using a product outside its factory parameters will void its warranty and is not covered by our standard warranty policy.

Toolriver is committed to your satisfaction. Unless otherwise stated, Toolriver will accept merchandise in good, clean, working condition for a period of 30 days from the date-of-purchase. Returned items must have the original carton, packaging materials, and warranty information. Some items can not be returned if they are opened. Merchandise that has been worn, used, or altered will not be accepted for return or exchange. Due to hygienic reasons, masks, ear plugs, and other wearables that go over the mouth and nose will not be accepted for return or exchange. Original shipping charges are non-refundable. Restocking fees may apply.

True Value Rewards is available at participating stores. With True Value Rewards, you can earn points for every purchase toward future savings. Want to join? Learn more, find a participating store, and enroll at TrueValueRewards.com.