hydra drill mud pump in stock

Preferred Pump offers the best rewards program in the water well equipment industry. Check out our social media pictures to see what you"ve been missing!

Preferred Pump offers the best rewards program in the water well equipment industry. Check out our social media pictures to see what you"ve been missing!

Hydra-Fab Manufacturing, Inc. in Phenix City, Alabama, manufactures a variety of well drilling equipment. Our flagship product is the BoreMaster ZX-1000, a rig designed for heavy-duty drilling.

The electric winch raises and lowers the power head at the push of a button. And you add the drill stem as it gets deeper. Once you hit water, install your casing and your pump.

The ZX-1000"s platform design grips the ground securely. Its single solid-beam mast is adjustable from 0 degrees to 45 degrees so you can calibrate it for that perfect bore alignment, even when you are drilling on a slope.You get the choice of either Kohler or high quality Import Engines to power your rig. Other standard features include:

Hydra-Fab Manufacturing, Inc. offers a package deal for the ZX-1000. Originally priced at $6,245, we are now offering for$5,200. Along with the rig, the package also comes with the following:

The drilling equipment is available in a variety of configurations and power levels, including 13 HP to 16 HP gas engines, or 10 HP to 15 HP diesel engines. Each EPA-approved engine includes an electric ignition system with an electric starter.

Hydra-Fab Manufacturing, Inc. in Phenix City, Alabama, manufactures BoreMaster trailer-mounted hydraulic rigs. Our rigs are available in a variety of power configurations, from 16 HP-25 HP gasoline or diesel engines. Portable packages are also offered, with power levels ranging from 13 HP to 36 HP.

Featuring fully hydraulic high-torque top head drive units with forward and reverse rotations, our BoreMaster rigs work fast and are easily operated. Their 6 in. power masts can be raised and lowered in seconds while still being able to drill in perfectly straight lines.

Instead of converted water pipes, all rigs come standard with 200 ft. of high-strength drill stems with wide thread couplings. They also feature carry racks for drill stems, bits, and mud pumps. Other features include:

Hydra-Fab Manufacturing, Inc. also manufactures mud pumps. They are available in a wide range of power levels, from 6.5 HP to 16 HP. Features include:

Drilling your own well instead of using city water has many benefits. For one, it gives you access to clean, clear, and fresh water that is not loaded with chemicals. Ground water can be used for:

Drilling your own well also saves you on utility costs. What"s more, should a water shortage ever occur, you would still have fresh water without the need to pay for city water. You only need electricity to run the pump.

East West Machinery & Drilling is "Meeting Drillers Needs", established in 1987. We offer for sale top quality (new, re-manufactured, and used) drill rigs, tooling, air boosters & compressors, mud pumps, heavy & light equipment, salvage, parts, for sale & Services to global contractors working in all forms of drilling applications & construction machinery. NGWA members #: 3163777.

Search Engine of (Products)enter the model or part number, manufacture then model numbers, and year range to locate product items. View in languages of Arabic, Dutch, French, Italian, Spanish, and Turkish (G Select Language). Contact Us (Sales Dept & Sí, hablamos español por teléfono y correo electrónico) for prices & questions & assistance. We will work with you to select the drilling product items listed to meet the needs of your projects.

With drill rig service centers in Kansas, Florida and Pennsylvania, you’ll have industry-leading drill rig service team support nearby for your routine maintenance or more in-depth rig remounting and refurbishment.

The 2,200-hp mud pump for offshore applications is a single-acting reciprocating triplex mud pump designed for high fluid flow rates, even at low operating speeds, and with a long stroke design. These features reduce the number of load reversals in critical components and increase the life of fluid end parts.

The pump’s critical components are strategically placed to make maintenance and inspection far easier and safer. The two-piece, quick-release piston rod lets you remove the piston without disturbing the liner, minimizing downtime when you’re replacing fluid parts.

Historically, most drillers dug two pits prior to drilling a well.  A first pit, called a settling pit, received the drilling fluid and cuttings from the drill hole via a short shallow trench.  The cuttings settled down to the bottom of the the settling pit.  A second pit, called a mud pit, was dug nearby and a second trench directed the overflow of the settling pit into the mud pit.  Most of the cuttings settle to the bottom of the settling pit and the drilling fluid in the mud pit has a much higher liquid to cuttings ratio.  In other words, the water in the second pit, the mud pit, is “cleaner.” Drilling fluid from the mud pit is then pumped, by a mud pump, back down the drillpipe.  During the drilling process, cuttings are continuously shoveled from the settling pit so it does not become clogged with cuttings.  Although most of the cuttings settle in the settling pit, it is also necessary to occasionally shovel cuttings from the mud pit as well.

Below is a photograph of mud pits prepared for drilling.  This photograph is from the hydra-jett site.  Hydra-Fab manufacturing http://hydra-jett.com/index.html  sells small and medium sized drilling rigs and is worth looking at if you are considering moving up to a small rig.

As you might imagine, diggining mud pits is a significant undertaking and it makes an even bigger mess of your drilling site.  Modern drillers, being both ingenious and capitalistic souls, have devised a way to avoid this costly, unpleasant step.  They bring portable mud pits to the drill site.  A portable mud pit is simply a container or series of containers that the drilling fluid from the hole is directed to where cuttings settle out prior to the fluid being pumped again down the drillpipe.  Not only does it eliminate the time/money consuming digging but it leaves a cleaner drillsite upon completion of the well.

….but it frequently doesn’t work as well for those of us who have small portable mud pits.  Using real mud pits results in more efficient drilling.  There is no leakage around the guide tube with real mud pits.

Here is an example of a portable mud pit positioned at the back of a commercial drilling rig.  Cuttings from the hole are directed into the settling pit on the right.  Then drilling fluid passes through to the mud pit on the left and it is pumped back down the hole.

There is a wide variety of designs of portable mud pits.  Here are just a few sketches I found to give you an idea of designs that folks have come up with.

So, by now your are probably wondering, where does all that leave us?  We are not going to buy one of those $500 portable mud pits for our $200 project are we?  Absolutely not, in fact you may just be better off digging your pits.   If you are going to dig several wells you might want to consider using a portable mud pit with a mud pump.  I made one out of wood and it works fine.  It is not as efficient as the commercial mud pits but it does the job.  Please take a look at the video below.

As you can see my portable mud pit is just a wooden box with a fitting for the suction line and a minor obstruction to keep the cuttings away from the suction.  You can probably come up with a better design for a portable mud pit that I have.  I probably could but it is already built and I’m not inclined to build another one – but – If I were doing another one, I’d probably build two boxes that fit inside one another for easier travel and storage, and then sat beside each other when drilling.

BW1500-12 mud pump used for various engineering drilling rigs, geological drilling rig when drilling would like to nip the circulating fluid (mud or water), which is equipped with drilling rigs to drill holes with mud. During drilling mud pump pumps slurry to the hole to provide coat to the wall, to lubricate the drilling tools and to carry the rock debris up to the ground.

BW1500-12 mud pump is a horizontal single-acting cylinder reciprocating piston pump with variable speed to change the displacement and pressure selected for use.

They are also the main equipment of the geological survey,the main role in the process of core drilling boreholes is to supply fluid(mud or water),making it circulate during drilling and carry rock waste back to the ground,in order to achieve and maintain the bottom hole clean and lubricate drill bits and drilling tools with cooling.