letourneau mud pump free sample

The 2,200-hp mud pump for offshore applications is a single-acting reciprocating triplex mud pump designed for high fluid flow rates, even at low operating speeds, and with a long stroke design. These features reduce the number of load reversals in critical components and increase the life of fluid end parts.

The pump’s critical components are strategically placed to make maintenance and inspection far easier and safer. The two-piece, quick-release piston rod lets you remove the piston without disturbing the liner, minimizing downtime when you’re replacing fluid parts.

On the other hand, lewco mud pumps come in different sizes to can be operated by electric water, solar water pump, and semi-automatic. Because of the type of mud pumps, it is important to consider the design of the mud pumps as they are powered by electric water, and as a name, it is important to consider a long-lasting usage of the water. In addition to the two types of lewco mud pumps, one is the most important choice among them. Lewco mud pumps and different electric mud pumps are one of the most commonly found types.@@@@@

As a result, they are designed in different sizes, patterns and designs. There are many lewco mud pumps with different sizes, on top of a all-purpose design, and also designed for different cleaning and maintenance. Some lewco mud pumps with compressed air are also available in a range of sizes.@@@@@

A lewco mud pumps are a cleaner, as it will keep less dirt on the surface. It is also designed to keep the debris clean, and it pushes clean pits without the need of debris. On the other hand, a lewco water pumps also clean the pits, irrigation systems will avoid water from seeping the pumps into the pits. It is additionally designed to clean the debris, and it pushes out clean pits.@@@@@

It can also keep the cleaned debris in the future. A lewco mud pumping is efficiently designed, allowing it to clean up debris in the future, and it will also prevent spillage from happening. The lewco mud pumping is efficiently designed, and it can therefore keep more cleaned debris in the future.

The mud pumps market size is expected to grow at a significant rate during the forecast period. A mud pump is a large, high-pressure (up to 7500 psi), single-acting triplex reciprocating pump used to circulate mud in a well at a specific flow rate (between 100 and 1300 gallons per minute). Instead of a triplex reciprocating pump, a double-acting two-cylinder reciprocating pump is occasionally utilized as a mud pump. Typically, a rig operator keeps two or three mud pumps on hand, one of which is active and the others on standby in case of an emergency. Mud is gathered up with the use of mud pumps, which use suction to circulate the mud from the wellbore to the surface during the drilling process.

Increased demand for directional and horizontal drilling, higher pressure handling capabilities, and some new oil discoveries are the main drivers of this market"s growth. Mud pumps are specialized pumps that are used to transport and circulate drilling fluids and other related fluids in a variety of industries, including mining and onshore and offshore oil and gas. The global energy demand is boosting the market for mud pumps. However, high drilling costs, environmental concerns, and shifting government energy and power laws may stymie industry growth.

Innovation in technology is the key for further growth for example, MTeq uses Energy Recovery’s Pressure exchanger technology in the drilling industry, as the ultimate engineered solution to increase productivity and reduce operating costs in pumping process by rerouting rough fluids away from high-pressure pumps, which helps reduce the cost of maintenance for operators.

The major key player in global mud pumps market are Flowserve (U.S.), Grundfos (Denmark), Halliburton (U.S.), Sulzer (Switzerland), KSB Group (Germany), Ebara Corporation (Japan), Weir Group (U.K), and SRS Crisafulli, Inc (U.S.). Tsurumi Pump (Japan), Shijiazhuang Industrial Pump Factory Co. Ltd (China), Excellence Pump Industry Co.Ltd (China), Kirloskar Ebara Pumps Limited (India), Xylem Inc (U.S.), and Goulds Pumps (U.S.) are among others.

In the drilling business, MTeq uses Energy Recovery"s Pressure exchanger technology as the ultimate engineering solution to boost productivity and lower operating costs in the pumping process by rerouting abrasive fluids away from high-pressure pumps, which helps operators save money on maintenance. The latest trend reveals that regulatory agencies are persuading manufacturers and consumers to choose electric mud pumps over fuel engine mud pumps to reduce the environmental impact of fuel engine mud pumps.

The global mud pumps market is segmented on the basis of type (duplex pump, triplex pump, and others), component (fluid end and power end), application (oil & gas industry and building industry), and Region (North America, Europe, Asia Pacific, and Rest of the World).

Based on type, mud pumps can be segmented as duplex and triplex pumps. Triplex pumps are expected to progress because of the ~30.0% lesser weight than duplex pumps offering similar efficiency. The pump transfers the fluids with the help of mechanical movements.

Based on application, mud pumps market can be segmented as oil & gas industry and building industry. As oil and gas fields going mature, operators must drill wells with large offset, high laterals, widening their applicability by using mud motors, and high-pressure pumps. To fulfill the demand drilling companies increase their mud pumping installation capacity, with higher flexibility. For instance, LEWCO has developed W-3000 mud pump model for oil drilling, which can handle power up to 3000 HP.

Based on region, North America is predominant because of tight oil and shale gas sources, followed by Asia-Pacific due to the increased number of wells in the regions, especially in countries such as China and India due to the rapid urbanization and industrialization. Authorities in countries such as India, China are working on enhancing their production capacities for reducing the import bills, which ultimately help in the growth of mud pumps market.

This market is broadly driven by oil and gas industry as mud pumps are used to move massive amount of sludge and mud at the time of drilling. Countries such as China, Russia, Saudi Arabia, and the U.S. have the largest number of oil wells. The demand for mud pumps will increase with the number of oil wells, across the globe.

This multistage system utilizes several of Sigma’s advanced products that are proven to maximize efficiencies and upgrade operations of any reciprocating pumping system by themselves.

The Charge Free Dampening System™ is categorically the most sophisticated pulsation control available for your rigs’ pumping operations. With the introduction of the CFD System, Sigma Drilling Technologies proves to be the authority on state-of-the-art advancements in pulsation control technologies.

Closed loop pressurized freshwater liner wash system, complete with integral water cooling tank equipped with centrifugal pump and driven by explosion proof electric motor

Belt drive transmission: two each motor sheaves and QD mounted pump sheaves; banded Kevlar Vbelts; belt guards; for use with AC drive motors c/w 20HP blower assemblies

Created specifically for drilling equipment inspectors and others in the oil and gas industry, the Oil Rig Mud Pump Inspection app allows you to easily document the status and safety of your oil rigs using just a mobile device. Quickly resolve any damage or needed maintenance with photos and GPS locations and sync to the cloud for easy access. The app is completely customizable to fit your inspection needs and works even without an internet signal.Try Template

Houston, Texas -- To eliminate equipment compatibility issues and the prospect of additional spare-parts inventories for drilling contractors, the LeTourneau Ellis Williams Company (LEWCO) can factory-equip its heavy-duty W-Series and general-duty WH-Series mud pumps with virtually any major brand of fluid end module. Customers not specifying a particular brand receive LEWCO"s standard one-piece or two-piece fluid end modules made of quenched and tempered forged steel, featuring "off the shelf" expendables readily available from domestic and international sources.

LEWCO mud pumps are in-house manufactured. For maximum quality assurance -- with job-ready performance verified in advance -- every pump is tested under full load prior to shipment, in the company"s fully equipped, million-dollar "mud pump laboratory." LEWCO pumps provide input ratings of 300 to 3,000 horsepower (224 kW to 2,237 kW) and deep-drilling discharge pressures as great as 7,500 pounds per square inch (527 kg/cm2). Their premium components include a pressurized lubrication system that force-feeds lubricant to all power-end bearings including upper and lower crosshead slides; a balanced forged steel crankshaft that reduces noise and vibration and helps extend component life throughout the pump; and a robust frame of double-wall, welded-steel, mounted on a heavy-duty oilfield skid.

The LeTourneau Ellis Williams Company builds high-performance mud pumps for oil and gas drilling (on land and offshore), petroleum production and processing, well-servicing, and horizontal directional drilling; as well as ancillary drilling products including pulsation dampeners; drawworks; rotary tables, transmissions, and drives; and swivels. Located in Houston, Texas, LEWCO is a wholly owned subsidiary of LeTourneau Incorporated, a leading manufacturer of self-elevating offshore drilling rigs, forestry equipment, and wheel loaders.

For more information, contact the LEWCO Sales Department at 6500 Brittmoore Road, Houston, TX 77241-1343; telephone 1-888-MUD-PUMP (683-7867), fax 713-856-5341; e-mail pumps@lewco-equip.com. Or visit www.lewco-equip.com.

3 DRILLING SYSTEMS LEWCO Mud Pumps Cameron manufactures high-performance, robust LEWCO mud pumps for onshore and offshore oil and gas drilling applications. Each mud pump features a one-piece, forged and fabricated alloy steel crankshaft for smooth operation and enhanced longevity. In addition, LEWCO mud pumps include a welded steel power frame, forged alloy steel pinions and gears and triple-redundant power end lubrication. Prior to delivery, LEWCO mud pumps are tested in our quality control facility to verify performance expectations. For maximized drilling performance and efficiency, LEWCO mud pumps offer high discharge flow rates, impressive power-to-weight ratios and small footprints. Cameron can also furnish fluid end modules to match the customer s existing inventory. Cameron takes pride in their ability to provide integrated pump packages, including top or rear mount AC or DC electric drives, controls, manifolds, piping and accessories. Pumps are installed on a heavy-duty skid or trailer mounted for portability. 3

4 LEWCO Mud Pumps Features One-Piece Forged and Fabricated Alloy Steel Crankshaft The power balanced crankshaft reduces noise and vibration and extends the life of the bearing and crankshaft life. Rather than using a multipiece bolted component, the LEWCO crankshaft is made of one-piece, forged and fabricated alloy steel construction. It is repairable to help reduce operating expense and its bearings are lubricated via drilled internal passageways for longevity. Welded Steel Power Frame The mud pump power frame is engineered for performance, reliability and toughness. Designed for discharge pressures as high as 7500 psi, it is an independent, precision-fabricated structure of double-wall welded steel, with stiffeners and gussets for added strength and durability. As opposed to pumps mounted on an integral skid, LEWCO mud pumps come mounted on a heavy-duty oilfield skid for mobility and increased alignment capability, reducing component wear caused by internal stresses. Triple-Redundant Power End Lubrication The LEWCO triple-redundant, filtered lubrication system includes internal gravity/splash plus internal/external force-feeding of most of its power end bearings and upper/lower crosshead slides. For protection even at low operating speeds, the system includes a gear-driven mechanical pump off the main gear and a second pump driven by an electric motor. Fluid End Modules LEWCO fluid end modules are available in one or two-piece configurations using quenched and tempered forged steel material. Cameron can furnish fluid end modules compatible with various mud pump brands already in use, eliminating the need to stock extra spares. Fluid end expendables are off-the-shelf parts, readily available from domestic and international Cameron facilities, further minimizing the need for additional stocking. 4

5 DRILLING SYSTEMS Forged Alloy Steel Pinions and Gears Double helix, or herringbone, gear sets provide impressive load transmission and quiet operation, while heat treatment enhances strength and durability. Steel Connecting Rods The LEWCO rolled plate, low-carbon steel connecting rods maintain precise alignment between the crankshaft and crosshead under maximum load. These rods feature double-row cylindrical roller bearings in the crosshead end and single row cylindrical bearings in the crankshaft end, reducing wear and friction under severe operating conditions. Discharge Manifold and Cross Made of forged, heat-treated steel for ruggedness, LEWCO discharge manifolds are designed to provide reliable connections and easy module maintenance. The pieces are available in working pressures of 3000, 5000 and 7500 psi and in various flange outlet configurations with clean-out strainers. On LEWCO pumps, the single-piece, trepanned manifold mounts directly to the front or back of the fluid ends, which eliminates connections between the discharge modules. Threaded Cylinder Heads and Valve Covers Threaded cylinder heads and valve covers provide quick and easy access to valves and liners. Super Nuts on Main Bearing Cap Used in lieu of hex nuts, super nuts eliminate the need for special tools that are not commonly available on drilling rigs. 5

6 LEWCO WH-Series Mud Pumps Smaller Footprints. More Horsepower. WH-Series: 300 to 2000 hp rating Developed for increased mobility, the WH-Series mud pumps deliver high performance in a compact design. Featuring small footprints and less weight, these pumps are ideal for applications where space is limited. LEWCO mud pumps feature a power balanced, single-piece forged steel crankshaft for smooth operation. 6

7 DRILLING SYSTEMS WH-32 Triplex Piston Model Continuous Duty Performance Data Stroke, : 2 (304.8) Gear Ratio: 4.43 Rated hp (kw): Spm PUMP SPEED (Spm) IMUM INPUT HP (kw) rating 300 (969) 00 (820) 900 (67) 700 (522) 500 (373) 300 (224) psi (kg/cm 2 ) Based on 90% mechanical efficiency 2 Based on 00% volumetric efficiency 6-3/4 (7.5) 2766 (94.5) (2.08) 725 (2744) 63 (2322) 502 (900) 390 (478) 279 (056) 67 (633) 6-/2 (65.) 2983 (209.7) 5.7 (9.574) 672 (2545) 569 (253) 465 (762) 362 (370) 259 (979) 55 (587) 6 (52.4) 350 (246.) (6.678) 573 (268) 485 (835) 397 (50) 308 (68) 220 (834) 32 (500) 5-/2 (39.7) 466 (292.9) (4.04) 48 (822) 407 (542) 333 (26) 259 (98) 85 (70) (420) 5 (27.0) 5000 (35.5) (.582) 398 (506) 337 (274) 275 (042) 24 (8) 53 (579) 92 (347) WH-62 Triplex Piston Model Continuous Duty Performance Data Stroke, : 2 (304.8) Gear Ratio: 4.4 Rated hp (kw): Spm PUMP SPEED (Spm) IMUM INPUT HP (kw) rating 600 (93) 467 (094) 333 (994) 200 (895) 067 (795) 933 (696) 7-/2 (90.5) (20.0) (26.060) 826 (327) 757 (2867) 688 (2606) 620 (2346) 55 (2085) 482 (824) 7 (77.8) 3429 (24.) (22.70) 720 (2724) 660 (2497) 600 (2270) 540 (2043) 480 (86) 420 (589) 6-/2 (65.) 3997 (279.6) 5.7 (9.574) 62 (2349) 569 (253) 57 (958) 465 (762) 44 (566) 362 (370) 6 (52.4) 4668 (328.2) (6.678) 529 (2002) 485 (835) 44 (668) 397 (50) 353 (334) 308 (68) 5-/2 (39.7) 5555 (390.6) (4.04) 444 (682) 407 (542) 370 (402) 333 (26) 296 (2) 259 (98) 5 (27.0) 6722 (472.6) (.582) 367 (390) 337 (274) 306 (58) 275 (042) 245 (927) 24 (8) 4-/2 (4.3) 7500 (527.3) (9.38) 297 (26) 273 (032) 248 (938) 223 (844) 98 (75) 74 (657) Based on 90% mechanical efficiency 2 Based on 00% volumetric efficiency 3 Pressures greater than 5000 psi require high-pressure fluid ends 4 Liner is induction-hardened, therefore liner life is reduced WH-202 Triplex Piston Model Continuous Duty Performance Data Stroke, : 2 (304.8) Gear Ratio: 4.4 Rated hp (kw): Spm PUMP SPEED (Spm) IMUM INPUT HP (kw) rating 2000 (49) 857 (385) 74 (278) 57 (72) 429 (065) 286 (959) 7-/2 (90.5) (225.0) (26.060) 964 (3649) 895 (3388) 826 (327) 757 (2867) 688 (2606) 620 (2346) 7 (77.8) 3674 (258.3) (22.70) 840 (378) 780 (295) 720 (2724) 660 (2497) 600 (2270) 540 (2043) 6-/2 (65.) 426 (299.6) 5.7 (9.574) 724 (274) 672 (2545) 62 (2349) 569 (253) 57 (958) 465 (762) 6 (52.4) 500 (35.6) (6.678) 67 (2335) 573 (268) 529 (2002) 485 (835) 44 (668) 397 (50) 5-/2 (39.7) 5952 (48.5) (4.04) 58 (962) 48 (822) 444 (682) 407 (542) 370 (402) 333 (26) 5 (27.0) 7202 (506.3) (.582) 428 (622) 398 (506) 367 (390) 337 (274) 306 (58) 275 (042) 4-/2 (4.3) 7500 (527.3) (9.38) 347 (34) 322 (220) 297 (26) 273 (032) 248 (938) 223 (844) Based on 90% mechanical efficiency 2 Based on 00% volumetric efficiency 3 Pressures greater than 5000 psi require high-pressure fluid ends 4 Liner is induction-hardened, therefore liner life is reduced 7

8 LEWCO W-Series Mud Pumps Built Strong to Last Long. W-Series: 700 to 3000 hp rating LEWCO W-Series mud pumps are built for durability, longevity and are designed with a welded power steel frame that features supplementary steel for operational efficiency. The W-Series line includes robust, high pressure, low maintenance pumps to increase drilling performance. LEWCO mud pumps feature a power balanced, single-piece forged and fabricated alloy steel crankshaft for smooth operation. 8

9 DRILLING SYSTEMS W-72 Triplex Piston Model Continuous Duty Performance Data Stroke, : 2 (304.8) Gear Ratio: 4.84 Rated hp (kw): Spm PUMP SPEED (Spm) IMUM INPUT HP (kw) rating 700 (268) 558 (62) 47 (056) 275 (95) 33 (845) 992 (739) 7-/2 (90.5) (223.2) (26.060) 826 (327) 757 (2867) 688 (2606) 620 (2346) 55 (2085) 482 (824) 7 (77.8) 3644 (256.2) (22.70) 720 (2724) 660 (2497) 600 (2270) 540 (2043) 480 (86) 420 (589) 6-/2 (65.) 4226 (297.) 5.7 (9.574) 62 (2349) 569 (253) 57 (958) 465 (762) 44 (566) 362 (370) 6 (52.4) 4960 (348.7) (6.678) 529 (2002) 485 (835) 44 (668) 397 (50) 353 (334) 308 (68) 5-/2 (39.7) 5902 (45.0) (4.04) 444 (682) 407 (542) 370 (402) 333 (26) 296 (2) 259 (98) 5 (27.0) 742 (502.) (.582) 367 (390) 337 (274) 306 (58) 275 (042) 245 (927) 24 (8) 4-/2 (4.3) 7500 (527.3) (9.38) 297 (26) 273 (032) 248 (938) 223 (844) 98 (75) 74 (657) Based on 90% mechanical efficiency 2 Based on 00% volumetric efficiency 3 Pressures greater than 5000 psi require high-pressure fluid ends 4 Liner is induction-hardened, therefore liner life is reduced W-74 Triplex Piston Model Continuous Duty Performance Data Stroke, : 4 (355.6) Gear Ratio: 4.84 Rated hp (kw): Spm PUMP SPEED (Spm) IMUM INPUT HP (kw) rating 700 (268) 545 (52) 39 (037) 236 (922) 082 (807) 927 (69) 7-/2 (90.5) (208.7) (30.403) 884 (3345) 803 (304) 723 (2737) 643 (2432) 562 (228) 482 (824) 7 (77.8) 3407 (239.5) (26.484) 770 (294) 700 (2649) 630 (2384) 560 (29) 490 (854) 420 (589) 6-/2 (65.) 395 (277.8) (22.836) 664 (252) 603 (2284) 543 (2055) 483 (827) 422 (599) 362 (370) 6 (52.4) 4637 (326.0) 5.4 (9.458) 565 (24) 54 (946) 463 (75) 4 (557) 360 (362) 308 (68) 5-/2 (39.7) 559 (388.0) (6.350) 475 (799) 432 (635) 389 (472) 346 (308) 302 (45) 259 (98) 5 (27.0) 6678 (469.5) (3.52) 393 (486) 357 (35) 32 (26) 286 (08) 250 (946) 24 (8) 4-/2 (4.3) 7500 (527.3) (0.945) 38 (204) 289 (095) 260 (985) 23 (876) 202 (766) 74 (657) Based on 90% mechanical efficiency 2 Based on 00% volumetric efficiency 3 Pressures greater than 5000 psi require high-pressure fluid ends 4 Liner is induction-hardened, therefore liner life is reduced 9

10 LEWCO W-Series Mud Pumps W-224 Triplex Piston Model Continuous Duty Performance Data Stroke, : 4 (355.6) Gear Ratio: 4.82 Rated hp (kw): Spm PUMP SPEED (Spm) IMUM INPUT HP (kw) rating 2200 (64) 2000 (49) 800 (342) 600 (93) 400 (044) 200 (895) 9 (228.6) (87.5).567 (43.780) 272 (486) 57 (4378) 04 (394) 925 (3503) 80 (3065) 694 (2627) 8-/2 (25.9) (20.2) 0.37 (39.05) 35 (4296) 032 (3905) 929 (355) 825 (324) 722 (2734) 69 (2343) 8 (203.2) 3376 (237.3) 9.39 (34.592) 005 (3805) 94 (3459) 823 (34) 73 (2768) 640 (2422) 548 (2076) 7-/2 (90.5) 384 (270.0) (30.403) 884 (3345) 803 (304) 723 (2737) 643 (2432) 562 (228) 482 (824) 7 (77.8) 4409 (30.0) (26.484) 770 (294) 700 (2649) 630 (2384) 560 (29) 490 (854) 420 (589) 6-/2 (65.) 54 (359.5) (22.837) 664 (253) 603 (2283) 543 (2055) 483 (828) 422 (597) 362 (370) 6 (52.4) 600 (42.9) 5.4 (9.460) 565 (239) 54 (948) 463 (753) 4 (556) 360 (363) 308 (66) 5-/2 (39.7) 742 (502.) (6.353) 475 (798) 432 (635) 389 (472) 346 (30) 302 (43) 259 (980) 5 (27.0) 7500 (527.3) (3.50) 393 (487) 357 (35) 32 (25) 286 (083) 250 (946) 24 (80) Based on 90% mechanical efficiency 2 Based on 00% volumetric efficiency 3 Requires special retention system; liner is induction-hardened, therefore liner life is reduced W-225 Triplex Piston Model Continuous Duty Performance Data Stroke, : 5 (38.0) Gear Ratio: 4.82 Rated hp (kw): Spm PUMP SPEED (Spm) IMUM INPUT HP (kw) rating 2200 (64) 2000 (49) 800 (342) 600 (93) 400 (044) 200 (895) 9 (228.6) (75.0) (46.907) 363 (560) 239 (469) 5 (4222) 99 (3753) 868 (3284) 744 (285) 8-/2 (25.9) (96.2).054 (4.840) 26 (4603) 05 (484) 995 (3766) 884 (3348) 774 (2929) 663 (25) 8 (203.2) 35 (22.5) (37.063) 077 (4077) 979 (3707) 88 (3336) 783 (2965) 685 (2595) 588 (2224) 7-/2 (90.5) 3585 (252.0) (32.575) 947 (3584) 86 (3258) 775 (2932) 688 (2606) 602 (2280) 56 (955) 7 (77.8) 45 (289.3) (28.376) 825 (322) 750 (2838) 675 (2554) 600 (2270) 525 (986) 450 (703) 6-/2 (65.) 4773 (335.6) (24.467) 7 (2692) 646 (2447) 582 (2202) 57 (958) 452 (73) 388 (468) 6 (52.4) 560 (393.8) (20.848) 606 (2293) 55 (2085) 496 (876) 44 (668) 386 (459) 330 (25) 5-/2 (39.7) 6666 (468.7) (7.58) 509 (927) 463 (752) 47 (577) 370 (402) 324 (226) 278 (05) 5 (27.0) 7500 (527.3) (4.478) 42 (593) 382 (448) 344 (303) 306 (58) 268 (04) 229 (869) Based on 90% mechanical efficiency 2 Based on 00% volumetric efficiency 3 Requires special retention system; liner is induction-hardened, therefore liner life is reduced 0

11 DRILLING SYSTEMS W-3000 Triplex Piston Model Continuous Duty Performance Data Stroke, : 6 (406.4) Gear Ratio: 4.36 Rated hp (kw): Spm PUMP SPEED (Spm) IMUM INPUT HP (kw) rating 3000 (2237) 2700 (203) 2400 (790) 200 (566) 800 (342) 500 (9) 9 (228.6) (246.) 3.29 (50.035) 322 (5004) 90 (4504) 058 (4003) 925 (3503) 793 (3002) 66 (2502) 8-/2 (25.9) 3925 (275.9).79 (44.630) 79 (4463) 06 (407) 943 (357) 825 (324) 707 (2678) 590 (2232) 8 (203.2) 443 (3.5) (39.533) 044 (3954) 940 (3558) 836 (363) 73 (2768) 627 (2372) 522 (977) 7-/2 (90.5) 504 (354.4) 9.80 (34.746) 98 (3475) 826 (327) 734 (2780) 643 (2432) 55 (2085) 459 (737) 7 (77.8) 5787 (406.9) (30.268) 800 (3027) 720 (2724) 640 (2422) 560 (29) 480 (86) 400 (54) 6-/2 (65.) 672 (47.9) (26.098) 690 (260) 62 (2349) 552 (2088) 483 (827) 44 (566) 345 (305) 6 (52.4) 7500 (527.3) (22.238) 588 (2224) 529 (2002) 470 (779) 4 (557) 353 (334) 294 (2) Based on 90% mechanical efficiency 2 Based on 00% volumetric efficiency 3 Requires special retention system; liner is induction-hardened, therefore liner life is reduced

Drilling consumables such as mud pump systems and their components can drastically increase your uptime while reducing costs and health/safety/environmental (HSE) risks. To support your drilling needs, Forum’s patented P-Quip® mud pump system offers a single-source solution that integrates high-quality fluid end components for maximum longevity and performance.

With more than 20 years of successful operation in severe environments, P-Quip offers a proven track record for the lowest cost of ownership in the industry. As part of our commitment to quality, our mud pump parts use patented Banded Bore™ technology that significantly reduces stress concentrations and leads to longer module life.