model 12p160 mud pump gn solids supplier

GNSB Series Centrifugal pump is used for transferring slurry or mud or water. It can be used as feeding pump for desander, desilter, or used as mixing pump for Jet Mud Mixer. Also it can be used as trip pump, and supercharging pump for rig mud pump. All GN model centrifugal pump use tungsten carbide mechanical seal, with famous brand Bearing. And spare parts interchangeable with most of the international Brand pump which helps customer to source spare parts easily. Open impeller design that lowers axial thrust loads, and make it easier for installation, repair and maintenance.

Thick, Strong Concentric casing provides extended life over conventional volute designs. The Concentric design minimizes turbulence and abrasive wear.

The skid for supporting pump and motor is made from casting instead of welding to provide reliable operation and less vibration in a result to extend the pump and motor life.

GN Centrifugal pump has been exported to many overseas countries. The reliable quality and cost effective solutions has helped GN Solids Control to win many orders of centrifugal pump from the world. With our branches and partners around the world, clients can get GN centrifugal pump and parts from local warehouses to save delivery time.

There are many kinds of centrifugal pump for various material transfer in various field. The drilling mud centrifugal pump is also called as sand pump.Centrifugal pumpis widely used for oil and gas drilling mud system,horizontal directional drilling (HDD) fluids transfer. GN Solids Control makes various sizes centrifugal pump to meet for various applications.

Impeller is an important part of centrifugal pump to transfer and convert energy. Through the impeller, the mechanical energy of the motor is transformed into pressure energy and kinetic energy. The impeller is composed of front and rear cover plates (impeller discs) and curved blades. According to whether there are front and rear impeller, it is divided into closed type, semi open type and open type impeller.

In general, the pump conveying sundries adopts open impeller. The tank injection pump and sand pump, as well as drilling mud pump adopts semi open impeller, while the slag pump adopts closed impeller. Through investigation, it is found that the most easily worn part of the semi open sand pump impeller is the origin of the blade. Due to the ball impeller out! High strength and uniform wear. At the same time, when the wear increases the gap between the suction end side cover plate and the front side, the performance of the pump is more stable.

GNSB Series centrifugal pumps are designed with the following characteristics. Below are some features of the GN Solids Control centrifugal pump design:

1. GN Solids Control centrifugal pump adapts composite mechanical seal. It means the mechanical seal is installed in the inner end of the sealing box, the auxiliary packing seal mounted in the outer end. The double sealing makes the sealing more reliable.

3. GN Solids Control centrifugal pump is with Higher output and high efficiency. The impeller profile complying with the hydraulic principle, it can increase the output and efficiency.

Centrifugal pump is widely used in solids control system. Internal the mud system, It can be located before the de-sander, de-silter and mud cleaner to transfer the drilling mud to the cyclone unit, equipped to the jut mud mixer unit as the mud mixing pump. For external of the mud system, the centrifugal pump can be used as the trip pump for mud supplement under well and the supercharging pump to transfer the drilling fluids to high pressure rig mud pump. The solids contained in drilling fluids request the centrifugal pump wet contacting parts with excellent wear resistance and high efficiency on flow rate. Based on the material adopted and structure design, GN centrifugal pump provide users solution for both aforementioned problems. Furthermore, the spare parts of GN centrifugal pump are interchangeable with international brand pump for customers’ parts sourcing convenience.

Thick, Strong Concentric casing provides extended life over conventional volute designs. The Concentric design minimizes turbulence and abrasive wear.

GN SOLIDS CONTROL is centred around separation equipment: Centrifuge technology/ Shaker screens/ Solids Control (desander, desilters, mud tanks, etc)/ Waste Management (cuttings dryers, conveyors, inclined clarifiers, etc) / Transfer Pumps (centrifugal, shear, screw, etc) / Electrical controls. Much of the GN range of equipment has been rigorously tested by, and is used today by, some of the world’s oil & gas giants in the challenging conditions of offshore drilling; these products more than meet expectations. Hebei GN Solids Control Co., Ltd is a leading manufacturer based in China and USA GN has exported to over 70 countries and we are helping to build a world class brand for the separation industry. GN is the first API certified solids control equipment manufacturer from China.

The exclusive UK and Ireland dealership is run by a team who are themselves innovators of the technology, bringing immediate benefits to GN and its prospective Europe-wide customers. With a dedicated technical and logistics team, we can deliver high-end service from pre-sales through to after-sales across a wide product offering. Contact details - Sales & Administration: Innovation Centre, Medway, Kent, ME5 9FD, United Kingdom +44 (0)1580 857151 Technical and Logistics: Waters End Farm, Standen Street, Iden Green, Kent, TN17 4LA, United Kingdom +44 (0)1580 848110 This UK dealership is being developed and resourced from the UK with support from China.

The tank shall be marked with the nameplate (English) to indicate the basic performance parameters of the tank; each silo clearing port of the tank shall be sealed by a convenient and practical sand-cleaning door, which can effectively meet the needs of mud discharge and sand cleaning; In the aggravation pipeline, the mud flows into different warehouses and is controlled by high-position butterfly valves. Each compartment of the tank is provided with a manhole and a wall ladder. The four corners of the tank base are provided with suspension safety lifting positions, and the tank body is strictly guaranteed to be lifted. The process is safe and reliable; the tank has two 12-inch mud pump suction ports, which are respectively sucked into the mud of the mud removal bin and the mixing bin, and sealed with a mask.