mud pump and bazooka in stock

The Bazooka Continuous Flow Pump was designed in conjunction with Graco specifically to pump joint compound for high production drywall finishing applications. The Endurance Pump, MaxPower Motor and Advantage Drive System combine to create the most rugged and reliable pump on the market. The internal hopper filter maximizes material usage by allowing joint compound collected during the wipe down process to be re-used without fear of debris entering the pump. The 25 gallon hopper can be used as a tool wash station and includes an air tight lid so compound can be preserved for next day use. With the optional CTFIL, standard ATF tools can be filled while the continuous flow tools are in use.

The Bazooka Continuous Flow Taper connects to the Continuous Flow Pump (CTPMP) to simultaneously apply drywall tape and the correct amount of joint compound to all types of drywall joints. The taper features an inline handle with dual trigger and weighs just 7 pounds. The new creaser wheel design and tool-less hose connection make this high production drywall finishing tool even easier to use. Use with CTVLV for wireless, radio frequency (RF) control of the flow of joint compound from the pump to the taper.

All categoriesAccess DoorAccessoriesAccessoryAdaptersAngle HeadApparelApplicatorAttachmentAutomatic TaperBucket ScoopsCaulking GunChiselClearanceCompound ApplicatorCorner ApplicatorCorner Bead HopperCorner FinisherCorner FinishersCorner FlusherCorner RollerCorner RollersDrywall LiftExtendable HandleExtendable PlanksFinishing TrowelFlat BoxFlat Box HandleFlat Box PlugGooseneckGooseneck AdapterGooseneck PlugGrooved Mud HeadsHandleHandlesJoint KnivesLaddersLoading PumpNail SpotterNotched TrowelOutside Corner ApplicatorPole SanderPower SandersRaspSawhorsesSemi-Automatic TaperSkimming BladeSkimming BladesTape ReelTape ReelsTaping KnivesTaping Tool KitTool BeltTool CasesTool PouchTrowelTuck Pointer

Cleaning a Drywall Mud Pump doesn"t get any easier than this! Columbia Hot Mud Pumps have stainless quick-release clamps on the head that allow for easy removal of the pump tube. The "Hot Mud" designation is from the ease of clean up - making it possible to run hot mud or fast set compounds

There"s something different about the Columbia Pump - The handle is bent! It"s designed that way - the 20 degree bend in the handle doubles the leverage of conventional straight handles. More leverage equates to less back strain, easier pumping, easier priming, and faster job completion. Even the connection to handle is better - Columbia"s billet aluminum handle link won"t crack or degrade like the competition"s cast aluminum parts. You can also get a comfortable grip with the padded handle and smooth billet ball end. It"s time that you get a handle on your pump!

Columbia Hot Mud Pumps are built to exacting air-tight standards making them the easiest to pump and prime. Fabricated with an anodized aluminum cylinder, durable stainless steel shaft, a precision machined cast aluminum head, and a tough, smooth solid aluminum leg (All sourced from USA materials - backed by a 5 year Columbia Warranty). Whether you are using quick-set mud or any other type of joint compound, Columbia has the pump for your bucket. Stainless Steel Box Filler and Gooseneck sold separately.Columbia Hot Mud Pump Features:

The 76TT-CA EasyClean® Loading Pump is specifically designed to work with standard joint compound buckets in Canada, which are slightly taller than standard U.S. buckets. The additional length provides stability and allows the foot valve to reach the bottom of the bucket, maximizing joint compound usage. The 76TT-CA pump has all the same unique features of the 76TT, including the tool-less foot valve, integrated outlet gasket and EasyClean® design.

Ever get confused on what taping tools you need in your arsenal? This set includes everything you need to get started with automatic taping and allows you to customize which flat box and handle size suits you best.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

It is the responsibility of the buyer to report any issues at the time of delivery or pick up.Driver’s signature will be evidence of proof of delivery in the event the customer is not available to receive the materials on site.We are unable to accept returns on Drywall, Bagged Products, Coronado Stone, Coronado Brick, ADSS Manufactured Stone or Natural Sure Stone. Products outside of these categories may be returned within 30 days of your purchase and  will be inspected upon return by our warehouse personnel. Products with any damage will not be accepted.  Please retain your copy of receipt as proof of purchase. Exchanges can be accepted with a valid receipt.

If you wish to return an item that has been shipped to you via a shipping courier, please contact us in order to start the procedure. Returns must be started within 2 business days of receiving the product. If you have received the product damaged, please take as many pictures as possible of the packaging and how the product was delivered and send those to info@shopadss.ca. Once that is received the credit or replacement process will be started. If you ordered an incorrect item, or wish to exchange an item, you can contact us to start the return process. We will process a return slip for our shipping courier and send that off to you to have them items dropped off at the nearest depot. The shipping charges to send the item back from your location to ours will be deducted off of the returned item. Once the product has arrived at our Edmonton location, we will process the refund or exchange.

If you have received a refund through our online store, it will automatically go on to the credit card that was used to purchase the product. You will receive an email notification when the refund is processed and the credit will show up within 1-3 business days from then.

We recommend you use general purpose finishing compound or general purpose “lightweight” finishing compound. You can also use “machine mud” which is designed specifically for automatic finishing tools, but it can be more expensive and harder to source. DO NOT use any type of durabond or “hot muds”, as these fast setting compounds could harden inside your automatic taper - requiring you to break your taper down and manually clean every component.

When you first start using the automatic taper, it is suggested you practice using it on scrap drywall or a practice board, so you can get a feel for: Getting the correct mud consistency. It should be thin enough so that the taper runs smoothly along the seam, but thick enough that the tape remains in place on the wall

Setting the drive wheel brake. The drive wheel brake ensures the drive wheel doesn’t spin backwards when you pull the taper off the wall due to pressure from the cable - as this will create gaps in the mud that is applied behind the tape. You want the brake to be set just enough so that there is not any noticeable resistance and the taper moves smoothly along the seams.

PRO TIP: During a long flat seam run on a ceiling, rock the taper from one side of the drive wheel to the other side every 2 - 3 feet; this action will ensure the mud and tape stays in place until you’ve had a chance to bed the tape down with a trailing knife.

On inside corner seams, keep your taper as close to 45 degrees as possible, so that both wheels are touching the two walls or the ceiling and the wall. This will make sure tape is centered correctly in the seam as you push it in place with the creaser wheel.

When you get to the end of a seam or a corner, cut the tape 3” to 4” before you finish. Then let the remaining tape roll over the drive wheel and into the corner. With a little practice, you will be able to cut to the perfect length every time.

PRO TIP: If you feel that you have cut the tape a little short, gently pull up on the tape with your hand from partway down the wall. You should be able to center the tape a bit and close the gap.

Always stop the automatic taper completely before activating the control sleeve to cut the tape. Otherwise the tape won’t cut properly at a right angle to the taper and could double cut even jam up your tape.

Before you use your automatic taper, always oil up all moving parts liberally with 3-in-1 machine oil. DO NOT use the original WD-40, as it is caustic and will break down your gaskets and plunger. In fact, we don’t recommend you use any lubrication that is in a spray can, unless you know what the propellant is. Often it is benzyne, which is also very hard on gaskets and seals. We highly recommend common machine oil such as 3-in-ONE

Once you’ve finished cleaning your taper, we suggest liberally coating all moving parts and the inside of the tube with 3-in-ONE oil again. It will displace the water and reduce any opportunity for corrosion.

When cleaning your automatic taper do not force the plunger towards the head by jamming a rod, stick or anything else from the bottom and pushing against it. This could cause your cable to become caught up at the head and potentially snap it.

Applies joint tape and correct amount of joint compound to drywall flats and angles. Holds 500" roll of paper face joint tape. Also works with Structus No-Coat ZoomaFlex Corner Tape, and StraitFlex Ammo Flex Corner Tape.