mud pump ceramic liners quotes brands

Lake Petro provides high quality Mud Pump Parts including Mud Pump Liners, Mud Pump Fluid End Module, piston, Valve and Seat etc. With more than 10 years of experience in the oil and gas industry, we are dedicated to help and support our loyal clients with the most cost-effective and quality Liners and Pistons. We also provide mud pump price and mud pump for sale.

We offer Liners with Ceramic (Zirconia and Aluminium oxide) and Steel (Metal and Bi-metal) materials for all common brands of the mud pump and triplex mud pump.

Bi-metal liners (double metal liners) are made of forged steel shell and wear-resistant sleeve of high chromium iron. In the production process, the size accuracy should be strictly controlled, which can ensure that they can be easily and stably installed. The inner sleeve with high finish and hardness is wear-resistant, corrosion-resistant and has a long service life. The bi-metal liners are suitable for a lot of bad working conditions. Its service life is more than 800 hours.

Ceramic Liners are made of a ceramic inner sleeve and a forged steel outer shell. The service life of ceramic liners is about 4000 to 10000 hours, the minimum time is at least 2000 hours, which is a lot more than bi-metal liners. Because of the phase transformation toughen technology, the ceramic liners have the features of wear-resistance, erosion-resistance, high-pressure-resistance, high hardness and strength. Zirconia type and Alumina type are common type of ceramic sleeve. Compared with Alumina type, Zirconia type liners have better toughness properties and a much longer service life. Piston wear and water consumption for lubrication can be reduced as well.

All Lake Petro liner products are interchangeable with O.E.M. products. Meanwhile, we provide customized Liners according to drawings. Our liners, also with our other mud pump spares, are supplied for use in Honghua, F-Series, Bomco, Emsco and National lines of triplex drilling pumps. Let Lake Petro be your one-stop shop for your whole fleet of pumps. Please refer to “Suitable Pump Models” Lable for more details.

A wide variety of mud pump ceramic liners options are available to you, such as 1 year, not available and 3 years.You can also choose from new, mud pump ceramic liners,As well as from energy & mining, construction works , and machinery repair shops. and whether mud pump ceramic liners is 1.5 years, 6 months, or unavailable.

A wide variety of ceramic liner for mud pump options are available to you, such as 1 year, not available and 3 years.You can also choose from new, ceramic liner for mud pump,As well as from energy & mining, construction works , and machinery repair shops. and whether ceramic liner for mud pump is 1.5 years, 6 months, or unavailable.

Some of our largest competitors use a cheaper alumina-ceramic sleeve to make their liners. Although these liners last a little longer than standard chrome-iron liners, they only last about half as long as zirconia-ceramic liners. Our liners are made from zirconia-ceramic material in order to provide the longest life and best wear performance.

3. It is wear resistance, high anti-corrosion, high temperature resistance, high pressure, high intensity and high hardness. The using time of liners is up to 6,000 hours.

4. Zirconium ceramic liners have better performance than alumina ceramic liners such as more toughness, longer service life, saving water lubrication, reducing wear of piston.

RPS offers state of the art consumable spare parts for the most popular horizontal directional drilling pumps and well stimulation (fracking) pumps, major pump brands:

Distributor of heavy duty submersible mud, sand, sludge & slurry pumps. Specifications of pumps include 5 hp to 30 hp motor, three phase, 208 V to 575 V, 6.8 A to 39 A, 3 in. to 6 in. NPT sizes, 38 ft. to 134 ft. head size & 475 gpm to 1,690 gpm flow rate. Features include impellers, wear plates & agitators made from abrasive resistant 28 percent chrome iron, process hardened ductile iron volutes casted with thick walls, class H motor insulation, double silicon carbide mechanical seals, heavy duty lip seal & stainless steel shaft & shaft sleeve. Sand, sludge & slurry pumps are used in mines, quarries, dredging, coal & ore slurries, sewage treatment plants & steel mills. UL listed. CSA approved. Meets OSHA standards.

GN SOLIDS CONTROL is centred around separation equipment: Centrifuge technology/ Shaker screens/ Solids Control (desander, desilters, mud tanks, etc)/ Waste Management (cuttings dryers, conveyors, inclined clarifiers, etc) / Transfer Pumps (centrifugal, shear, screw, etc) / Electrical controls. Much of the GN range of equipment has been rigorously tested by, and is used today by, some of the world’s oil & gas giants in the challenging conditions of offshore drilling; these products more than meet expectations. Hebei GN Solids Control Co., Ltd is a leading manufacturer based in China and USA GN has exported to over 70 countries and we are helping to build a world class brand for the separation industry. GN is the first API certified solids control equipment manufacturer from China.

Composed of pressure bearing metal jacket (45# steel) and high wear-resistant ceramic lining, combined with precision machining assembly, the overall mechanical properties are superior, more corrosion resistance, high temperature resistance, high pressure, labor cost and maintenance cost. Lower than the bimetal cylinder liner can be inserted, more than 4000 hours, the overall cost is reduced.

We can supply quality linings and ceramic linings in all specifications, API 7 EMSCO FB 1300/1600 Zirconia linings for various brands of mud pumps, manufactured under API 7.

1) Our API 7 mud pump bushing for EMSCO is made of forged steel housing and high chromium iron inner sleeve. Shell made of high quality carbon steel centrifugal forging, tensile strength of more than 610MPa, yield strength of more than 450MPa, elongation of more than 17%, hardness HB-180-200; The inner sleeve is centrifugally forged by high chromium iron alloy, and the hardness is above HRC62 after heat treatment. Each API 7 mud pump bushing for EMSCO is machined to close tolerances to ensure ease of installation and long bushing life. The inner diameter of these quality bushings has been honed to a mirroring finish to wear smoothly and evenly over the life of the bushing. It has more than 800 hours of service.

The Zirconia lining of our API 7 EMSCO FB 1300/1600 MUD Pump is made of forged steel housing and ceramic inner casing. We can supply zirconia (ZrO 3) casing and alumina (Al 2O 3) casing. Ceramic liners are used for drilling and geological exploration, especially in harsh oil production environments, offshore oil Wells and natural gas exploration. Its service life is 5 to 10 times longer than that of metal products and can reduce mining costs by more than 50 times. %.