mud pump clipper seals pricelist

The Clipper Oil Seal design features an integrally molded rubber fiber outer case and an elastomeric seal lip. The unique, nonmetallic construction will not rust or corrode and forms a gasket-type seal between the equipment housing and the seal outside diameter (OD).

Clipper Split Seals are known for being the easiest split seal to install because they do not require a cover plate to keep them in the housing. The composite OD provides the best retention of any split seal available. Replacing failed seals in with Clipper Split Seals saves on downtime and lost production expenses.

Clipper seals are available for shaft diameters from 0.250″ (6.35 mm) to over 65″ (1651 mm) in both standard and high-performance elastomer compounds. With over 10,000 tooled sizes, Clipper seals are readily available for most applications in either a solid or split design.

Stainless Steel Springs Are Standard on all Clipper Oil. Seals where the industry standard is a lower quality carbon steel. Clipper’s spring material provides improved lip loading at higher temperatures and resists the rust and corrosion that is common with lower-quality materials. The upgraded spring ensures consistent lip loading over the life of the seal.

the anchor of Parker"s rotary shaft seal product line and is available in a wide range of profiles and material options. The Clipper design features an

We recognize and understand the vital role of mud pump oil seal in their application. With purposes including securely fastening components within systems, and contaminants prevention such as gases and liquids from navigating through enclosed and sealed areas. That is why we offer wholesale mud pump oil seal in different variations and diversities to ensure the integrity and efficiency of systems they will be applied to will function successfully and optimally. The different seals" types available include static that does not move along with other seals and dynamic seals that move collaboratively.

Depending on the industry and selected purpose, we consider mud pump oil seal requirements. Requirements are like pressure, that is pressure changes, to ensure they can withstand and do not deform by the sealed fluid, the load and how it can withstand deflection, dynamics such as the alignment and vibration, and temperature covering the environmental conditions and the heating arising from the friction of the seal operation and fluid movement.

The seals are either bolts, nuts, or washers. Seal bots are commonly used because of their benefits in being reusable, preventing fluids and contaminants from escaping even under high pressure. Nuts are essential on temperature withstanding and compatibility with screws, studs, and bolts, in addition to, easy installation. Moreover, washers can withstand high pressures and are compatible with other seals.

The mud pump piston is a key part for providing mud circulation, but its sealing performance often fails under complex working conditions, which shorten its service life. Inspired by the ring segment structure of earthworms, the bionic striped structure on surfaces of the mud pump piston (BW-160) was designed and machined, and the sealing performances of the bionic striped piston and the standard piston were tested on a sealing performance testing bench. It was found the bionic striped structure efficiently enhanced the sealing performance of the mud pump piston, while the stripe depth and the angle between the stripes and lateral of the piston both significantly affected the sealing performance. The structure with a stripe depth of 2 mm and angle of 90° showed the best sealing performance, which was 90.79% higher than the standard piston. The sealing mechanism showed the striped structure increased the breadth and area of contact sealing between the piston and the cylinder liner. Meanwhile, the striped structure significantly intercepted the early leaked liquid and led to the refluxing rotation of the leaked liquid at the striped structure, reducing the leakage rate.

Mud pumps are key facilities to compress low-pressure mud into high-pressure mud and are widely used in industrial manufacture, geological exploration, and energy power owing to their generality [1–4]. Mud pumps are the most important power machinery of the hydraulic pond-digging set during reclamation [5] and are major facilities to transport dense mud during river dredging [6]. During oil drilling, mud pumps are the core of the drilling liquid circulation system and the drilling facilities, as they transport the drilling wash fluids (e.g., mud and water) downhole to wash the drills and discharge the drilling liquids [7–9]. The key part of a mud pump that ensures mud circulation is the piston [10, 11]. However, the sealing of the piston will fail very easily under complex and harsh working conditions, and consequently, the abrasive mud easily enters the kinematic pair of the cylinder liner, abrading the piston surfaces and reducing its service life and drilling efficiency. Thus, it is necessary to improve the contact sealing performance of the mud pump piston.

As reported, nonsmooth surface structures can improve the mechanical sealing performance, while structures with radial labyrinth-like or honeycomb-like surfaces can effectively enhance the performance of gap sealing [12–14]. The use of nonsmooth structures into the cylinder liner friction pair of the engine piston can effectively prolong the service life and improve work efficiency of the cylinder liner [15–17]. The application of nonsmooth grooved structures into the plunger can improve the performance of the sealing parts [18, 19]. The nonsmooth structures and sizes considerably affect the sealing performance [20]. Machining a groove-shaped multilevel structure on the magnetic pole would intercept the magnetic fluid step-by-step and slow down the passing velocity, thus generating the sealing effect [21–23]. Sealed structures with two levels or above have also been confirmed to protect the sealing parts from hard damage [24]. The sealing performance of the high-pressure centrifugal pump can be improved by adding groove structures onto the joint mouth circumference [25]. The convex, pitted, and grooved structures of dung beetles, lizards, and shells are responsible for the high wear-resistance, resistance reduction, and sealing performance [26–28]. Earthworms are endowed by wavy nonsmooth surface structures with high resistance reduction and wear-resistance ability [29]. The movement of earthworms in the living environment is very similar to the working mode of the mud pump piston. The groove-shaped bionic piston was designed, and the effects of groove breadth and groove spacing on the endurance and wear-resistance of the piston were investigated [30]. Thus, in this study, based on the nonsmooth surface of earthworms, we designed and processed a nonsmooth striped structure on the surface of the mud pump piston and tested the sealing performance and mechanism. This study offers a novel method for prolonging the service life of the mud pump piston from the perspective of piston sealing performance.

The BW-160 mud pump with long-range flow and pressure, small volume, low weight, and long-service life was used here. The dimensions and parameters of its piston are shown in Figure 1.

A mud pump piston sealing performance test bench was designed and built (Figure 3). This bench mainly consisted of a compaction part and a dynamic detection part. The compaction part was mainly functioned to exert pressure, which was recorded by a pressure gauge, to the piston sealed cavity. This part was designed based on a vertical compaction method: after the tested piston and the sealing liquid were installed, the compaction piston was pushed to the cavity by revolving the handle. Moreover, the dynamic detection part monitored the real-time sealing situation and was designed based on the pressure difference method for quantifying the sealing performance. This part was compacted in advance to the initial pressure P0 (0.1 MPa). After compaction, the driving motor was opened, and the tested piston was pushed to drive the testing mud to reciprocate slowly. After 1 hour of running, the pressure P on the gauge was read, and the pressure difference was calculated as , which was used to measure the sealing performance of the piston.

To more actually simulate the working conditions of the mud pump, we prepared a mud mixture of water, bentonite (in accordance with API Spec 13A: viscometer dial reading at 600 r/min ≥ 30, yield point/plastic viscosity radio ≤ 3, filtrate volume ≤ 15.0 ml, and residue of diameter greater than 75 μm (mass fraction) ≤ 4.0%), and quartz sand (diameter 0.3–0.5 mm) under complete stirring, and its density was 1.306 g/cm³ and contained 2.13% sand.

Figure 4 shows the effects of stripe depth and angle on the sealing performance of mud pump pistons. Clearly, the stripe depth should be never too shallow or deep, while a larger angle would increase the sealing performance more (Figure 4).

The standard piston and the bionic piston were numerically simulated using the academic version of ANSYS® Workbench V17.0. Hexahedral mesh generation method was used to divide the grid, and the size of grids was set as 2.5 mm. The piston grid division is shown in Figure 8, and the grid nodes and elements are shown in Table 3. The piston cup was made of rubber, which was a hyperelastic material. A two-parameter Mooney–Rivlin model was selected, with C10 = 2.5 MPa, C01 = 0.625 MPa, D1 = 0.3 MPa−1, and density = 1120 kg/m3 [32, 33]. The loads and contact conditions related to the piston of the mud pump were set. The surface pressure of the piston cup was set as 1.5 MPa, and the displacement of the piston along the axial direction was set as 30 mm. The two end faces of the cylinder liner were set as “fixed support,” and the piston and cylinder liner were under the frictional interfacial contact, with the friction coefficient of 0.2.

To better validate the sealing mechanism of the bionic striped pistons, a piston’s performance testing platform was independently built and the sealed contact of the pistons was observed. A transparent toughened glass cylinder liner was designed and machined. The inner diameter and the assembly dimensions of the cylinder liner were set according to the standard BW-160 mud pump cylinder liners. The sealing contact surfaces of the pistons were observed and recorded using a video recorder camera.

(1)The bionic striped structure significantly enhanced the sealing performance of the mud pump pistons. The stripe depth and the angle between the stripes and the piston were two important factors affecting the sealing performance of the BW-160 mud pump pistons. The sealing performance was enhanced the most when the stripe depth was 2 mm and the angle was 90°.(2)The bionic striped structure can effectively enhance the contact pressure at the piston lips, enlarge the mutual extrusion between the piston and the cylinder liner, reduce the damage to the piston and cylinder liner caused by the repeated movement of sands, and alleviate the abrasion of abrasive grains between the piston and the cylinder liner, thereby largely improving the sealing performance.(3)The bionic striped structure significantly intercepted the leaked liquid, reduced the leakage rate of pistons, and effectively stored the leaked liquid, thereby reducing leakage and improving the sealing performance.(4)The bionic striped structure led to deformation of the piston, enlarged the width and area of the sealed contact, the stored lubricating oils, and formed uniform oil films after repeated movement, which improved the lubrication conditions and the sealing performance.

The bionic striped structure can improve the sealing performance and prolong the service life of pistons. We would study the pump resistance in order to investigate whether the bionic striped structure could decrease the wear of the piston surface.

Split Clipper® Oil Seals have the same superior characteristics as solid general purpose Clipper Oil Seals, but are factory-split at one place in the circumference. This permits installation over the side of a shaft, rather than over the end, and often can save dismantling the equipment in order to replace the existing rotary shaft seal.

Solid Clipper Oil Seals should be used whenever practical to provide maximum bearing protection in rotating shaft applications. However, installing a solid seal in a failed application can be costly and time consuming. In such cases, Split Clipper Oil Seals can be used to minimize unscheduled downtime, specifically where equipment cannot be uncoupled. These seals will provide long and efficient service until major or scheduled machine overhaul permits convenient installation of a regular non-split seal.

Split Clipper Oil Seals are available in Series R, RPD and RUP profiles, depending upon shaft diameter. RUP and RPD profiles are general purpose spring loaded with a single lip and are widely used as replacement seals because they provide superior bearing protection and embody a unique principle of design. The tough, dense outer case and a soft, flexible lip are concentrically molded as a single unit. The seal"s nonmetallic outer case forms a leak-free, press fit in the housing, conforming to minor surface irregularities.

NEW PumpWorks 760-00108-0000 Locknut Lock Nut N9 CA - NEW EagleBurgmann 760-00108-0000 Locknut Lock Nut N9 CA. We"re down to earth, easy to work with people. Quality Products at Lowest Prices. Fast Dispatch Service.

NEW PumpWorks 200-00102-0000 REPAIR KIT, G2, 7-13"", OIL - Title: NEW PumpWorks 200-00102-0000 REPAIR KIT, G2, 7-13", OIL. We"re down to earth, easy to work with people.

NEW Weir Warman DAM076C26 Slurry Pump Shaft Sleeve - Model: DAM076C26. MPN: DAM076C26. We"re down to earth, easy to work with people. Fast Dispatch Service.

FLOWSERVE 21-087-04 Seal,Pump Shaft,7/8 In PK 4 - FLOWSERVE 21-087-04. Seal,Pump Shaft,7/8 In PK 4. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.

196548 New-No Box; Industry-Std 2WY55 Gear Pump Seal Kit - 196548 New-No Box; Industry-Std 2WY55 Gear Pump Seal Kit ; Viton. Item is New; unused; no factory packaging. Austin Surplus SKU: 196548 Location: 39092-GRG-R03-P03-S03-0000715

Flowserve 21-200-04 Seal,Pump Shaft,2 In - General Purpose. Widia Hanita 5Vnc25018bw End Mill,Altin,1.0000 In Millng Dia,5Vnc. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. & Industrial.

Dayton 2Wv89 Turbine Pump Shaft Seal Kit,Regenerative - General Purpose. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. & Industrial.

PS-3981 U.S. SEAL MFG. Pump Seal / Shaft Seal (0.625" Shaft Size).” Lot Of 4”New - Hello up for auction today is a “Lot Of 4” New PS-3981 U.S. SEAL MFG. Pump Seal / Shaft Seal (0.625" Shaft Size). Any questions please feel free to ask. Thank you

198887 New-No Box; Firstam 53500610 Pump Sleeve - 198887 New-No Box; Firstam 53500610 Pump Sleeve; . Item is New; unused; no factory packaging. Austin Surplus SKU: 198887 Location: 89376-GRG-R13-P20-S05-D-0004432

198918 New-No Box; MFG- 685-91-75-071/10A Pump Stator Kit - 198918 New-No Box; MFG- 685-91-75-071/10A Pump Stator Kit; . Item is New; unused; no factory packaging. Austin Surplus SKU: 198918 Location: 89491-GRG-R13-P09-S04-B-0008123

198864 New-No Box; MFG- 329-693 Carbon Pump Seal - 198864 New-No Box; MFG- 329-693 Carbon Pump Seal; . Item is New; unused; no factory packaging. Austin Surplus SKU: 198864 Location: 89278-GRG-R13-P09-S04-A-0000971

198841 New In Box; U.S. Seal PS-8051 Pump Seal - 198841 New In Box; U.S. Seal PS-8051 Pump Seal ; . Item is New; unused; in factory packaging that may have been opened.. Austin Surplus SKU: 198841 Location: 89134-GRG-R13-P08-S03-G-0002825

Flowserve 51-137-05 Seal,Pump Shaft - Skf 19300 Shaft Seal, 1-15/16 X 2-7/8 X 5/16", Crw1, Nbr. General Purpose. Westward 88418 Single Spiral Brush,Carbon Steel,Pk10. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes.

FLOWSERVE 21-200-04 Seal,Pump Shaft,2 In - FLOWSERVE 21-200-04. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Hex-shaped outer shell reduces stress on components.

Deming 0030876 7/8" Crane Type 21 Single Seal - Deming 0030876, Seals 7/8″ Dia., Crane Type 21 Single Seal, Reg. Constr-BF1C1, Series 4001. We are happy to help.

Flowserve 52-150-05 Seal,Pump Shaft - Condor 30Lv55 Hooded Coverall, 2Xl, White, Chem Advanced, Zipper/Storm Flap. General Purpose. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. & Industrial.

232434 Old-Stock; US PS-626 Pump Seal; 0.625" Shaft Size - 232434 Old-Stock; US PS-626 Pump Seal; 0.625" Shaft Size; . Item appears Unused and has been in storage for some time.. Austin Surplus SKU: 232434 Location: GRG-R03-P03-S04-B-0003541

*NEW* LOT OF 3 TSK5 Stainless Steel Pump Seal Seat 2-1/4" Bore 50mm + Warranty! - Doing the right thing matters to us! ● Handled with care quickly! Local pick-up is always an option.

NEW Weir E4018TL1R55 Cover Plate Liner Slurry Pump - Model: E4018TL1R55. MPN: E4018TL1R55. We"re down to earth, easy to work with people. Fast Dispatch Service.

NEW Weir B15017R55 Cover Plate Liner Pump Rubber - Model: B15017R55. MPN: B15017R55. We"re down to earth, easy to work with people. Fast Dispatch Service.

NEW Weir B15036-19MR55 Frame Plate Liner Pump Rubber - Model: B15036 19MR55. We"re down to earth, easy to work with people. Quality Products at Lowest Prices. Fast Dispatch Service.

FLOWSERVE 16-100-03 Seal,Pump Shaft - FLOWSERVE 16-100-03. Seal,Pump Shaft. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.

FLOWSERVE 68-062-159 Seal,Pump Shaft,5/8 In - FLOWSERVE 68-062-159. Seal,Pump Shaft,5/8 In. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.

Cornell Pump Lip Seal A17073A-18 - NEW - Cornell Pump Lip Seal A17073A-18 - NEW, sold by the each.  Shipped FREE to the USA.  Offers on multi-unit purchases only please.  Thanks for looking.

Compatible or Armstrong Pumps 916706-021 Seal, Shaft Size .500", Ceramic + Buna - Ceramic Seat OD. 938". Need A Kit Not Listed?. We can duplicate just about any kit.

GRAINGER APPROVED 4PKL1 PTFE Square Piston Ring Set,Dia. 4-1/2" - GRAINGER APPROVED 4PKL1. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKL1. Polytetrafluoroethylene (PTFE) square ring piston seals are used in double-acting cylinders.

233860 New-No Box; US Seal PS-200 Pump Seal 5/8" ID x 1.25" OD - 233860 New-No Box; US Seal PS-200 Pump Seal 5/8" ID x 1.25" OD; . Item is New; unused; no factory packaging. Austin Surplus SKU: 233860 Location: GRG-R13-P16-S05-F-0000788

Palmetto Packing Chekseals 981 Shaft Seal,Axial Lip,1 In,Pk6 - Chekseals 981. Miller Electric 41V30 Gas Hose,Vinyl,25 Ft (7.6M). General Purpose. Baldwin Filters Pa4715 Air Filter,5-29/32 X 4-31/32 In. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures.

Flowserve Pump Shaft Seal 250psi 1" Shaft x 1" Nominal Length 70-103 - We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted.

PS-7307 U.S. SEAL MFG. Pump Seal / New In Box Fast Shipping +Warranty - PS-7307 U.S. SEAL MFG. Pump Seal / New In Box Fast Shipping +Warranty. Fast priority shipping No hassle returns Thanks for viewing

Water pump sealant 30x12mm - 30 mm z kołnierzem 35 mm, wew. Opening hours: Mon - Fri 8.00 ÷ 16.00 and Sat 8.00 ÷ 14.00. 36-002 Jasionka, Tajęcina 2KA - Poland near the airport Jasionka - Rzeszow. KUBOTA • ISEKI • YANMAR • HINOMOTO • HONDA • MITSUBISHI and others.

Flowserve 68-062-159 Seal,Pump Shaft,5/8 In - Campbell Chain & Fittings 3924215Pl Eye Hoist Hook W/ Latch, Pl, #22, 1 Ton. Westward 41R276 Mig Welding Wire,Er309l.045,2 Lb. General Purpose. D-Line Us/R2d22qsw/Gr Raceway, Quarter Round, 6 Ft. 6 In, White.

TACO 007-007RP Flange Kit,For In-Line Circulating Pumps - TACO 007-007RP. Diversion contrary to U.S. law is prohibited. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.

Flowserve 31-150-30 Seal,Pump Shaft - General Purpose. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. & Industrial.

FLOWSERVE 16-062-04 Seal,Pump Shaft,5/8 In - FLOWSERVE 16-062-04. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Replaces US Seal Type A, Crane Type 6, and Sealol Type 6OL.

Replacement Shallow Well Pitcher Pump Lower Check Leather 3 1/2" - Replacement check leather (lower of the 2 leathers) for shallow well or pitcher pumps. Dimensions: 3 1/2" ODLehman"s has parts for any pump or cylinder that we carry. We have cup leathers for any pump made! How to determine sizing: Measure the outer diameter (OD) of the cylinder base or the circular indentation in the base of the pump flange that surrounds the drop pipe opening. Check leathers are usually about 1/2" wider than the suction cup leather.Note: Quality leathers are always preserved with oil, which may cause an oily film or smell during the first few weeks of use.

185780 New-No Box; John Crane 2-477-019-999-00 Pump Seal Kit - 185780 New-No Box; John Crane 2-477-019-999-00 Pump Seal Kit; . Item is New; unused; no factory packaging. Austin Surplus SKU: 185780 Location: GRG-R09-P07-S03-B-0006300

12729VA Banjo Viton Acid Seal For 2” And 3” Banjo Poly Pumps - 12729VA Banjo Viton Acid Seal For 2” And 3” Banjo Poly Pumps. This seal is built different then the normal poly Banjo pump seal , this Viton Acid seal has the spring built to the inside of the seal so that the spring is not exposed to what ever is being pumped and the seal housing is made of a poly material,not metal. Ideal for pumping more aggressive material or a really long lasting seal if your pumping normal fluids .

187846 New-No Box; Cornell Pump A16166V-40 Mechanical Seal Kit - 187846 New-No Box; Cornell Pump A16166V-40 Mechanical Seal Kit; . Item is New; unused; no factory packaging. Austin Surplus SKU: 187846 Location: GRG-R09-P20-S03-F-0013299

FLOWSERVE 21-050-04 Seal,Pump Shaft,1/2 In - FLOWSERVE 21-050-04. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Hex-shaped outer shell reduces stress on components.

Flowserve 9T-125-227 Seal,Pump Shaft - General Purpose. Zoro Select 460-360Xgr 1/8" Mnpt X 3 Ft Tbe Red Brass Pipe Sch 80. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. & Industrial.

Davey Dynajet XP50,X70 Pump Mechanical Seal - Fits Model 5510,5520,5530 Five x - Dynajet XJ50,XJ70 - 72501, 72701-0. Dynajet 35 - 53011-4. Dynajet 50 - 53501-3, 53021-2. Dynajet 65 - 53041-3. Dynajet 70 - 53701-2, 53031-2. Dynajet 90 -53901-0, 53051-22daa 43062. Dynajet Ultra - 53061-0.

FLOWSERVE 21-175-06 Seal,Pump Shaft - FLOWSERVE 21-175-06. Seal,Pump Shaft. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.

WATERCO Pump Mechanical Seals Pack 10 x seals - Waterco – Aquamite 6340162. Waterco – Aquastream 6340162. Waterco – Hydrostar 6340162. Waterco – Hydrostorm 6340162. Waterco – Hydrotuf 6340162. Waterco – Supastream 6340162. Waterco – Supatuf 6340162.

Stalker SDH Pump Series Replacement Cartridge Mechanical Seals Liquid Quench App - This seal application is suitable for dewatering or chemical process. This seal fits the following pump sizes Temperature: -18°C - 120°C. 9300SHD APC8400. 9100SHD APC8300.

Poolrite 22230 Pool Pump Replacement Mechanical Seals 10 x included - Poolrite - Enduro EP-550,EP-750,EP-930,EP-1100,EP-1500. This Seal Fits the Following Pump Models. Suitable for the following Onga Pump Models. Fits Onga Centrifugal Pump Models. Carbon vs Ceramic. MC55,MC65-B/SHAFT.

Southern Cross Pump XMS043V Replacement Mechanical Seals 5 x shaft seals inc - Fits the following Pump Models -. SGC 80 X 50 - 250. SED 100 80 X 160. SHC 80 X 50 - 315. SGB 65 X 40 - 250.

Davey Dynajet Pump Replacement Mechanical Seal 10 x fits all Models - Dynajet 50 Dynajet 70 Dynajet 90. Dynajet 70 Dynajet 35 Dynajet ULTRA. Dynajet XJ50,XJ70Dynajet UTLTRA Dynajet 50. Dynajet 90 Dynajet 65 Dyna Flow. Dynajet Spa Bath. Fits Davey Models. Pump Specific / Picture is for reference only / Non st - OEM Pn 31128 (680500DAA).

Flowserve 52-125-05 Seal,Pump Shaft - Zoro Select 37C87kcs 3/8"-16 Socket Head Cap Screw, Black Oxide Steel, 7/8 In. General Purpose. Zoro Select H1s Boot Brush Base. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes.

GRAINGER APPROVED 4PKK5 PTFE Square Piston Ring Set,Dia. 3-1/4" - GRAINGER APPROVED 4PKK5. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKK5. Polytetrafluoroethylene (PTFE) square ring piston seals are used in double-acting cylinders.

TACO Cartridge, For 4JB22, 4PC90 007-042RP - For Use With Grainger Item Number : 4JB22, 4PC90. For Pump Number : 4JB22, 4PC90. Compatible with Grainger Part Number : 4JB22, 4PC90. Compatible with Series : 007. Model Number : 007-F5, 007-F5-7IFC.

GRAINGER APPROVED 4PKK8 PTFE Square Piston Ring Set,Bore Dia. 4" - GRAINGER APPROVED 4PKK8. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKK8. Polytetrafluoroethylene (PTFE) square ring piston seals are used in double-acting cylinders.

FLOWSERVE 21-062-152 Seal,Pump Shaft,5/8 In - FLOWSERVE 21-062-152. Seal,Pump Shaft,5/8 In. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.

TACO 1400-009RP Flange Kit,For In-Line Circulating Pumps - TACO 1400-009RP. Diversion contrary to U.S. law is prohibited. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.

FLOWSERVE 31-112-10 Seal,Pump Shaft - FLOWSERVE 31-112-10. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Hex-shaped outer shell reduces stress on components.

FLOWSERVE 21-125-04 Seal,Pump Shaft - FLOWSERVE 21-125-04. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Hex-shaped outer shell reduces stress on components.

FLOWSERVE 16-062-06 Seal,Pump Shaft,5/8 In - FLOWSERVE 16-062-06. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Replaces US Seal Type A, Crane Type 6, and Sealol Type 6OL.

FLOWSERVE 16-062-11 Seal,Pump Shaft,5/8 In - FLOWSERVE 16-062-11. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Replaces US Seal Type A, Crane Type 6, and Sealol Type 6OL.

FLOWSERVE 21-075-99 Seal,Pump Shaft,3/4 In - FLOWSERVE 21-075-99. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Hex-shaped outer shell reduces stress on components.

FLOWSERVE 68-062-48 Seal,Pump Shaft,5/8 In - FLOWSERVE 68-062-48. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Install with the spring-loaded portion pressed into the pump housing and the mating ring rotating with the shaft.

FLOWSERVE 21-075-98 Seal,Pump Shaft,3/4 In - FLOWSERVE 21-075-98. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Hex-shaped outer shell reduces stress on components.

FLOWSERVE 68-062-11 Seal,Pump Shaft,5/8 In - FLOWSERVE 68-062-11. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Install with the spring-loaded portion pressed into the pump housing and the mating ring rotating with the shaft.

FLOWSERVE 16-075-10 Seal,Pump Shaft,3/4 In - FLOWSERVE 16-075-10. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Replaces US Seal Type A, Crane Type 6, and Sealol Type 6OL.

FLOWSERVE 21-112-41 Seal,Pump Shaft - FLOWSERVE 21-112-41. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Hex-shaped outer shell reduces stress on components.

FLOWSERVE 21-062-23 Seal,Pump Shaft,5/8 In - FLOWSERVE 21-062-23. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Hex-shaped outer shell reduces stress on components.

FLOWSERVE 21-100-250 Seal,Pump Shaft,1 In - FLOWSERVE 21-100-250. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Hex-shaped outer shell reduces stress on components.

FLOWSERVE 21-087-04 Seal,Pump Shaft,7/8 In - FLOWSERVE 21-087-04. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Hex-shaped outer shell reduces stress on components.

FLOWSERVE 21-175-08 Seal,Pump Shaft - FLOWSERVE 21-175-08. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Hex-shaped outer shell reduces stress on components.

DAYTON 4JMY8 Pump Shaft Seal Kit, Seal Type 21 - Pump Shaft Seal Kit, Seal Type 21. Diversion contrary to U.S. law is prohibited. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.

GRAINGER APPROVED 4PKJ9 PTFE Square Piston Ring Set,Bore Dia. 2" - GRAINGER APPROVED 4PKJ9. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKJ9. Polytetrafluoroethylene (PTFE) square ring piston seals are used in double-acting cylinders.

GRAINGER APPROVED 4PKK9 PTFE Square Piston Ring Set,Dia. 4-1/4" - GRAINGER APPROVED 4PKK9. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKK9. Polytetrafluoroethylene (PTFE) square ring piston seals are used in double-acting cylinders.

American Stainless Pumps Kms03018 Centrifugal Pump Mechanical Seal Kit - General Purpose. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. & Industrial. Westward 45Jw51 Oil Filter Wrench,1/2 Socket Sizes.

American Stainless Pumps Kms04018 Centrifugal Pump Mechanical Seal Kit - Armor Coat Ust235893 #8-32 Socket Head Cap Screw, Armor Coat Steel, 1/2 In L. Tamper-Pruf Screw 31180 #10 X 1 1/4 In Torx Button Tamper Resistant Screw. General Purpose. & Recepticles. Electrical Outlets.

Flowserve B0348749-Q1 Pump Seal 1"" 1.75"" B/VRA 1750 ⚡️