mud pump for sale uk supplier

GN SOLIDS CONTROL is centred around separation equipment: Centrifuge technology/ Shaker screens/ Solids Control (desander, desilters, mud tanks, etc)/ Waste Management (cuttings dryers, conveyors, inclined clarifiers, etc) / Transfer Pumps (centrifugal, shear, screw, etc) / Electrical controls. Much of the GN range of equipment has been rigorously tested by, and is used today by, some of the world’s oil & gas giants in the challenging conditions of offshore drilling; these products more than meet expectations. Hebei GN Solids Control Co., Ltd is a leading manufacturer based in China and USA GN has exported to over 70 countries and we are helping to build a world class brand for the separation industry. GN is the first API certified solids control equipment manufacturer from China.

The exclusive UK and Ireland dealership is run by a team who are themselves innovators of the technology, bringing immediate benefits to GN and its prospective Europe-wide customers. With a dedicated technical and logistics team, we can deliver high-end service from pre-sales through to after-sales across a wide product offering. Contact details - Sales & Administration: Innovation Centre, Medway, Kent, ME5 9FD, United Kingdom +44 (0)1580 857151 Technical and Logistics: Waters End Farm, Standen Street, Iden Green, Kent, TN17 4LA, United Kingdom +44 (0)1580 848110 This UK dealership is being developed and resourced from the UK with support from China.

Vikas Pumpis a growing Mud Pump Manufacturers In Birmingham UKengaged in offering a wide range of Industrial Pumps, Water Treatment Plant, Demineralisation Plant, Rain Water Harvesting Systems, Transfer Conveyors, Steel Tank, Industrial Chain, etc. to serve various purposes. By serving an excellent range at industry-leading prices, we have become a preferred choice of leading companies to get Mud Pump In Birmingham UK. We stand behind our products with confidence, as all our products reflect the standard of quality we explain and we maintain.

As one of the leading Mud Pump Manufacturers in Birmingham UK, we make sure to test all our products against several parameters before delivering it to our valuable clients. Our products are the best in the industry and are known for their smooth performance, innovation, excellence and affordability. Our efforts are always in the direction to meet and exceed client expectations. We offer the best Mud Pump Manufacturers In Birmingham UK, Our pricing is not just competitive, but it matches the best in the industry. If you are looking for a reliable supplier and Manufacturers of Mud Pump in Birmingham UK, you must contact us now.

Our company is managed to attain the position among the top Mud Pump Exporters and Suppliers in Birmingham UK. If you want impeccable products, discuss your requirements with our experts. Call us or drop your enquiry to get our assistance today.

The Azcue range of Drilling Mud pumps have been specifically designed for the transfer of drilling mud. Available in a range of sizes from 2” to 10” they can be driven by either electric motor, engine driven or hydraulically driven.

This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience.

For the successful execution of your projects, it is important to find an appropriate company with a good track record. We help you in connecting with the top mud pump manufacturers and companies and get the best quotation.

We have designed affordable annual subscription plans which would help you get leads for your business. You can have a look at our pricing chart by clicking on this link: https://www.energydais.com/pricing/ . These plans are customized according to the specific needs and requirements of your business.

The most widely used mud pumps across the industry are Triplex Reciprocating Pumps. Their application has gained immense popularity with time because they are 30% lighter than duplex reciprocating pumps with relatively less operational cost. Moreover, through these pumps the discharge of mud is smooth and they are capable of moving large volume of mud at higher pressure.

Yes. We help you find the best mud pumps irrespective of your location. We simplify your search by connecting you with top mud pump manufacturers and mud pump companies in your location, according to your budget and business requirement.

Yes. We use third-party companies to provide best quotations for your shipment and inspection of manufactured goods. We make sure that you get quality products from the manufacturer at the best price.

The most widely used mud pumps across the industry are Triplex Reciprocating Pumps. Their application has gained immense popularity with time because they are 30% lighter than duplex reciprocating pumps with relatively less operational cost. Moreover, through these pumps the discharge of mud is smooth and they are capable of moving large volume of mud at higher pressure.

The different parts of a mud pump are Housing itself, Liner with packing, Cover plus packing, Piston and piston rod, Suction valve and discharge valve with their seats, Stuffing box (only in double-acting pumps), Gland (only in double-acting pumps), and Pulsation dampener. A mud pump also includes mud pump liner, mud pump piston, modules, hydraulic seat pullers along with other parts.

The wearing parts of a mud pump should be checked frequently for repairing needs or replacement. The wearing parts include pump casing, bearings, impeller, piston, liner, etc. Advanced anti-wear measures should be taken up to enhance the service life of the wearing parts. This can effectively bring down the project costs and improve production efficiency.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

During drilling in Oil and Gas exploration, drilling mud or Bentonite is pumped into boreholes for multiple reasons. Pumping drill mud into boreholes cools the drill bit as well as bringing drill cuttings to the surface as the way in which mud is pumped into boreholes forms a closed loop system. The use of drilling mud also provides hydrostatic pressure to prevent liquids such as oil and gas rising to the surface, as drilling mud is thixotropic meaning when it is not agitated it stiffens forming a mud which is an effective liquid and gas barrier.

CDR Pumps are a leading independent pump manufacturer, manufacturing pumps for the chemical and pharmaceutical Industries for more than 50 years. Our range includes mag-drive centrifugal pumps, chemical process pumps, regenerative turbine...

Our dedicated teams all have a strong background and knowledge in the pump industry, with experience working across a variety of industrial and domestic projects.

Manufacturers of peristaltic hose pumps, including one of the largest pumps of this type in the world. The AFX150 pump with a flow rate up to 150m3/hr

Beautiful gold mud. This wall mirror and this is also an era -> mid 20th century 19411969 in addition to a frame material qualified as metal just as an item height -> tbc * A frame colour of the type gold * It"s an antique ¬

Cereal bowl our name is mud. A theme love hearts, A colour : multicoloured but also a pattern specified as hearts, A material stipulated as ceramic, Among others: cereal, name. Sold in United-Kingdom, used, by Bigj.2890 ¬

We supply pumps for - Flood relief | Ground water control | Mine dewatering | Well point dewatering | Industrial sludge pumping | Emergency pumping | Sewage over-pumping.

All of our used pumps are fully tested and serviced to be in good working order. If necessary repainted to our standard red finish (other colour options available at extra cost).

Normally 3 month return to base warranty is given for used pumps sold within mainland England, Wales and Scotland excluding the following postcodes: FK, KY, PA, PH, DD and the Highlands. Please contact us for further details.

Please note that pump photographs on this page are for general guidance only and may not depict the actual pump offered. All ex-rental, ex-hire, pre-owned and refurbished water pumps supplied in excellent condition.

Driven by a Volvo TWD1240VE radiator cooled, electric start diesel engine. Mounted on a skid base frame with steel crash frame, forklift pockets, central lifting eye and corner lifting points.

76mm solids handling capability and wet priming system ideal for industrial, flood relief, sewage by-pass, over-pumping and other commercial applications.

Driven by a Perkins 1104C-44TA radiator cooled, electric start diesel engine mounted on a skid base frame with rain cover, chassis integral fuel tank, forklift pockets, centre lifting point and starter control panel.

Driven by a Perkins 403D-15 radiator cooled, electric starter diesel engine. Mounted in a hushpac sound attenuated canopy on a 2-wheel road tow trailer with ball hitch. Also features bunded chassis integral fuel tank, and control starter panel that allows for remote telemetry monitoring along with emergency stop, variable speed throttle and float inputs.

Mounted on a skid base with crash frame, dip tray under engine, chassis integral fuel tank, centre + corner lifting points, forklift pockets and control start panel.

Each pump is fitted with a Hydovar variable speed drive allowing for contact pressure or flow rates varing between 10-70m and flow rates 1-11.75lps depending on set-up.

Mounted in a hushpac sound attenuated canopy with lifting frame, chassis integral bunded fuel tank, forklift pockets and engine mounted compressor for Godwin’s Dri-prime venturi automatic self-priming system.

Driven by a Perkins 1104 radiator cooled, electric start diesel engine. Mounted in a sound attenuated box canopy with central lifting eye, forklift pockets and chassis integral bunded fuel tank.

Driven by a Deutz radiator cooled, electric start diesel engine model D2009L03. Mounted in a sound attenuated canopy with central lifting eye, chassis integral bunded fuel tank, and 25cfm vacuum pump priming system incorporating priming tank and non-return valve fitted on discharge.

Driven by a Iveco, radiator cooled, electric start diesel engine mounted on a skid base frame with central lifting eye, guarding and vacuum pump priming system.

Ideal for Emergency pumping services, Docks, ports and harbours, Refineries, Water and waste treatment, Local authorities, Offshore and float outs, Quarries and mines, Building and construction, Manufacture and industry, Power stations, Tunnelling, Agriculture.

Driven by a Isuzu, radiator cooled, electric starter diesel engine model 4LE2 mounted in a gull wing door sound attenuated canopy with variable speed throttle, central lifting eye, chassis integral bunded fuel tank and SPP’s vacuum priming system with automatic clutch to disengage vacuum pump when primed.

Driven by an electric start diesel engine with options available for 4-wheel site tow trailer or skid base frame all included with chassis integral fuel tank and central lifting eye.

Fitted with 25cfm automatic vacuum self-priming system incorporating priming float tank and non-return valve fitted to discharge. Suitable for dry suction lifts of a maximum 8.5m though 6m or less is recommended.

Fitted with 60cfm automatic vacuum self-priming system incorporating priming float tank and non-return valve fitted to discharge. Suitable for dry suction lifts of a maximum 8.5m though 6m or less is recommended.

Fitted with a compressor priming system incorporating priming tank and non-return valve fitted on discharge. Suitable for dry suction lifts up to 8.5m though 6m or less is recommend.

New SPP/Kirloskar horizontal spilt case pump with twin stage impellers complete with packed gland seal and stainless steel shaft. Fitted with 6” NP16 flanged suction and delivery branches.

Kirloskar 150mm x 125mm DSM 125-4 split-casing pump being two stage impeller manufactured in quality cast iron, bronze type wear rings, stainless steel shaft with multi ring packed glands and outboard bearing.

This pump is fitted with SPP Automatic Priming equipment with a 25CFM vacuum pump being oil lubricated. All mounted on robust chassis fuel tank frame with central lifting frame and fork lift pockets.

Mounted on a skid base with crash frame, corner lifting eyes, guards and forklift pockets. Controlled via a DeepSea E800 LED digital display panel with push button start, variable speed adjustment, emergency stop and battery isolator.

Driven by a Duetz air-cooled, electric start diesel engine model F4M2011. Mounted in a sound attenuated box canopy on a twin axle road tow trailer with ball hitch, central lifting and forklift pockets.

Driven by a Hatz 4M41 air-cooled, electric start diesel engine mounted in a sound attenuated box canopy with forklift pockets and central lifting. Set also features chassis integral bunded fuel tank, diaphragm self-priming system, battery isolator, anderson plug and on/off probes with at least 10m of cable attached.

Ideal for site drainage, raw/process water, storm/flood water, emergency pumping, sewage over pumping, sludge, slurry, bentonite, viscous liquids and other industrial applications.

Driven by a JCB radiator cooled, electric start diesel engine model TC-63 mounted in a sound attenuated canopy with central lifting eye, forklift pockets, chassis integral bunded fuel tank and automatic self-priming diaphragm pump system.

Set includes a separate electric motor driven vacuum priming system incorporating priming tank and non-return valve fitted on discharge allowing for dry suction lifts of up to 8.5m though 6m or less is recommended.

Should you be stuck for power why not consider a diesel engine generator. This can be situated remote from the pump. Please note this can be offered at extra cost.

Fitted with Godwin’s high pressure bath mechanical seal design allowing for dry running for prolonged periods while automatically priming and re-priming with a compressor system.

Fitted with Xylems N-Impeller for improved solids handling of large soft solids or long fibrous material. Fitted with Godwin"s Dri-Prime ejector system enabling automatic self-priming suction lifts of 8.5m though 6m or less is recommended.

Fitted with Selwood’s water resistant diaphragm pump for automatic self-priming from suction lifts of 8.5m though 6m or less is recommended and a mechanical seal running in a oil bath which allows running dry without damage.

Driven by a radiator cooled, electric starter Perkins diesel engine mounted in a sound attenauted canopy with chassis integral fuel tank, central lifitng eye, forklift pockets, varible speed throttle, externally mounted emergancy stop button, battery isolator and diaphragm priming system.

The multi-vane open impeller is designed for high efficiency operation while still handling solids up to 30mm spherical diameter. ;Discharge flow rates and heads dependent on motor sizes. Motors can be supplied at an extra cost.

New and unused ETL50-1-120A in-line aviation fluid pump with 2” DN50 flanged suction and delivery branches. Close coupled to a ATEX approved Siemans, TEFC 3kw, 440v, 60hz electric motor.

New and unused ETL50-3-200A in-line aviation fluid pump with 1.1/2” DN40 flanged suction and delivery branches. Close coupled to a ATEX approved Siemans, TEFC 11kw, 440v, 60hz electric motor.

The pump type ETL (OH5) vertically in-line mounted, close coupled, radial split case, single stage, single suction, heavy duty centrifugal process pumps.

The design complies with the latest edition of the American Petroleum Institute standard "Centrifugal Pumps For General Refinery Services", also known as API 610/ ISO13709.

The in-line configuration is a compact pumping solution with mounting the impeller to an extended motor drive shaft presents a very compact pumping solution. The ETL (OH5) offers a space saving footprint and eliminates expensive baseplates. (This pump is also available in long coupled pump type ETLS (OH3) for high temperature applications)

Ideal for Fluid handling in oil refineries and petrochemical industry, High temperature and high pressure critical applications in chemical and allied industry, Upstream, pressure booster, Midstream, process transfer, bottom reflux, propane/butane/LPG handling, diesel oil/gasoline/naphtha/lube oils etc., sodium carbonate/caustic sour water, MEA/DEA/TEA, Fertilizer, carbonates/lean and semi lean solutions, NH3 feed, other removals, Power plant, Hot water circulation, condensate transfer, fuel oil, Onshore/Offshore installations, FSPO platforms, Hydrocarbon storage, Liquid gas plants.

The Spate 3B pump can handle dirty water, slurries, light and heavy oils. Can also handle petroleum industry products, including some of the more viscous liquids, at a high, non-turbulent flow rate.

These centrifugal pumps with closed impeller, feature a unique agitator design. This agitator lifts sediments into suspension, creating a slurry mixture and enables the continuous pumping of media with a high concentration of solids.

Robust construction, careful selection of materials and unique contour components have produced a pump with excellent abrasion resistance which, coupled with a low speed high torque motor, ensures long service life and economical operation.

LVA505 end suction pump with 6” flange suction and 4” flange delivery branches. Long coupled to a 45kw, 4pole, 415v TEFC electric motor mounted on a base frame with coupling guard.

New BP235K 6 stage diaphragm pump c/w safety relief valve belt driven by a Hatz electric start diesel engine model 1D90Z with at least 3 hour running integral fuel tank.

The unit is mounted on a skid base with forklift pockets and protective steel frame. The pump can produce between 162 and 222 l/m depending on engine speed at a constant 20bar pressure.

Supplied with 5m of 2 inch suction hose, 2 inch foot-valve with strainer, 20m of 1 inch clear braided hose for relief valve, pressure gauge and 1.1/4 inch female BSP outlet in addition to a complete set of spare belts.

Nearly new Calpeda NM25/16AE Pump with 1.1/2 inch female BSP suction and 1 inch BSP female delivery connections coupled to a 1.5kw, 415 volt, 50hz TEFC electric motor.

Capable of a maximum flow rate of 3.6 m 3 / hr at a maximum head of 49.4m. This pump has a 1 / 4 inch BSP. Suitable for pressure boosting applications.

Ideal for Agriculture, Water Supply and Treatment (oil and gas), Food, Cooling Water, De-watering and Water Supply (mining), Ground Water Development and Irrigation, Water Supply and Distribution (water), Flood Control in flooded suction applications.

New - Unused Xylem / Lowara MP100.1/6A horizontal multistage Vogal pump with enlarged 8" flanged suction and reduced 3" Vitriolic discharge connection.

Long coupled to a 2 pole, 160kw, 50hz, 415v electric TEFC motor base mounted complete with coupling guards, valves fitted to both suction and delivery, along with a Mahle filter mounted on the discharge side of the pump.

Portable Submersible Pump & Hose Trolley built for customer to enable multiple bores to be sampled in multiple areas. Complete with panel for full variable speed control and ‘plug & play’ ease of use

Food Grade Neoprene or Nitrile impeller, Carbon/ceramic mechanical type seal, this unit can be used for the safe pumping of food grade products and materials.

Used Worthington Simpson 6L13 split case pump with 8” flanged suction and 6” flanged delivery branches. Long coupled to a 132kw, 50/60hz 2pole TEFC electric motor mounted on a base frame complete with coupling guard.

Please note that pump photographs on this page are for general guidance only and may not depict the actual pump offered. All ex-rental, ex-hire, pre-owned and refurbished water pumps supplied in excellent condition.

We have available for sale a range of used 2” metallic and non-metallic air driven diaphragm pumps. Sold fully checked, tested and re-painted prior to dispatch.

We have available for sale a range of used 2” metallic and non-metallic air driven diaphragm pumps. Sold fully checked, tested and re-painted prior to dispatch.

We have available for sale a range of used 2” metallic and non-metallic air driven diaphragm pumps. Sold fully checked, tested and re-painted prior to dispatch.

We have available for sale a range of used 2” metallic and non-metallic air driven diaphragm pumps. Sold fully checked, tested and re-painted prior to dispatch.

The diaphragm operates in a balanced condition during the discharge stroke which allows the pump to be operated at discharge heads of over 200 feet (61 metres) of water.

The diaphragm operates in a balanced condition during the discharge stroke which allows the pump to be operated at discharge heads of over 200 feet (61 metres) of water.

The ARO Diaphragm Pump offers high volume delivery even at low air pressure. ARO pumps feature stall resistant design, modular air motor / fluid sections.

For sale we have a yellow chemical cabinet. This cabinet which has a lockable door and COSHH instructional documentation inside also has two ARO IR Intersol Pumps, Diaphragm Air pumps with a typical flow rate of 35gpm subject to air flow.

The above descriptions are provided in good faith, we do our best to offer factual information on all used equipment. "we as a result of selling two used generators, we had provided incorrect operational hours, which had been relayed onto a customer by mistake". We do our best to offer factual information however we take no responsibility for any or all information provided written or oral.

Having stated the forgoing we undertake to provide a quality service with every sale. We limit our liability to repair - replacement and transport costs. (for the record we paid tens of thousands to a company as we standby our values, by negotiation. Not legal).

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Drilling Supplies UK is a leading supply and engineering company that services the site investigation, geothermal and water-well markets. From our base in Durham, northern England, we primarily distribute specialist high-quality products. We maintain a large stock of equipment and plant on-site; our in-house engineering department is equipped with up-to-date computer numerical control machines.

The company’s industry reputation is built on its solid commitment to supplying and delivering quality products that are cost-effective. We keep a large stock of our full product range in our premises, so we can react immediately to customers’ needs. Drilling Supplies UK supports nationwide delivery on a next-day service. We can also offer great package deals to our customers and regularly despatch our products to overseas markets, thereby meeting our customers’ needs irrespective of their location.