mud pump for sale uk free sample

Mud pumps are the pumps deployed in the oil and gas industry, mainly to circulate drilling fluids and other kinds of fluids in and out of the drilled wells for exploration. The mud pumps transfer the fluids at a very high pressure inside the well using the piston arrangement. The number of pistons decides the displacement and efficiency of working of the mud pumps, originally only dual piston pumps and three-piston pumps were used, but the technological advancements have seen pumps with five and six pistons to come up. Currently the triplex pumps which have three pistons are used, but the duplex pumps having two pumps are still deployed in the developing countries.

Based on its types, global mud pump market can be segmented into duplex, triplex, and others. The triplex mud pumps will dominate the mud pump marking in the given forecast period owing to its advantages and ongoing replacement of duplex pumps with triplex pumps. Based on operation, the global mud pumps market can be segmented into electric and fuel engine.

The electric mud pumps will dominate the market during the given forecast period due to the advantage of eliminating the harmful carbon emission which is done in the case of fuel engine pumps. Based on its application, the global mud pumps market can be segmented into oil & gas, mining, construction, and others.

The major market driver for the global mud pumps market is the increasing exploration activities taking place in various regions of the world to satisfy the increased energy demand. The number of drilled wells has increased in recent years, which has certainly impacted the growth of the mud pumps market in both oil & gas and mining sectors.

Key market restraint for the global mud pumps market is the drift towards the cleaner sources of energy to reduce the carbon emissions, which will certainly decrease the demand for oil & gas and therefore will have a negative impact on the growth of the global mud pumps market.

Some of the notable companies in the global mud pump market are Mud King Products, Inc. Gardner Denver Pumps, Weatherford, Schlumberger, National Oilwell Varco, China National Petroleum Corporation, Flowserve Corporation, MHWirth, American Block, Herrenknecht Vertical Gmbh, Bentec GmbH Drilling & Oilfield Systems, Drillmec Inc, Sun Machinery Company, Shale Pumps, and Dhiraj Rigs.

The global mud pump market has been segmented into North America, Europe, Asia Pacific, Latin America, and Middle East & Africa. Owing to the well-established production sector and stable exploration industry North America holds the largest market for the mud pumps. The onshore exploration activities of oil & gas have increased at a good rate in the North America region, which has certainly boosted the growth of the mud pumps market in the region.

The demand from Europe and Asia Pacific has also increased due to exploration activities in both the regions owing to the increased energy demand. The energy demand specifically in the Asia Pacific has increased due to the increased population and urbanization. The Middle East and Africa also hold significant opportunities for the mud pumps market with increased exploration activities in the given forecast period.

In August 2018, Henderson which is a leading company in sales and service of drilling rigs, and capital drilling equipment in Texas signed a contract with Energy Drilling Company for the purchase and upgrade of oil field equipment’s which included three 1600hp × 7500psi mud pumps. This will be the first refurbishment completed at Henderson’s new service center and rig yard.

In January 2018, Koltek Energy Services launched the 99-acre facility for the testing of the oil field equipment in Oklahoma. This will allow the oil field equipment manufacturers to test their equipment at any given time. The company has deployed the MZ-9 pump which has a power rating of 1000Hp.

The mud pumps market size is expected to grow at a significant rate during the forecast period. A mud pump is a large, high-pressure (up to 7500 psi), single-acting triplex reciprocating pump used to circulate mud in a well at a specific flow rate (between 100 and 1300 gallons per minute). Instead of a triplex reciprocating pump, a double-acting two-cylinder reciprocating pump is occasionally utilized as a mud pump. Typically, a rig operator keeps two or three mud pumps on hand, one of which is active and the others on standby in case of an emergency. Mud is gathered up with the use of mud pumps, which use suction to circulate the mud from the wellbore to the surface during the drilling process.

Increased demand for directional and horizontal drilling, higher pressure handling capabilities, and some new oil discoveries are the main drivers of this market"s growth. Mud pumps are specialized pumps that are used to transport and circulate drilling fluids and other related fluids in a variety of industries, including mining and onshore and offshore oil and gas. The global energy demand is boosting the market for mud pumps. However, high drilling costs, environmental concerns, and shifting government energy and power laws may stymie industry growth.

Innovation in technology is the key for further growth for example, MTeq uses Energy Recovery’s Pressure exchanger technology in the drilling industry, as the ultimate engineered solution to increase productivity and reduce operating costs in pumping process by rerouting rough fluids away from high-pressure pumps, which helps reduce the cost of maintenance for operators.

The major key player in global mud pumps market are Flowserve (U.S.), Grundfos (Denmark), Halliburton (U.S.), Sulzer (Switzerland), KSB Group (Germany), Ebara Corporation (Japan), Weir Group (U.K), and SRS Crisafulli, Inc (U.S.). Tsurumi Pump (Japan), Shijiazhuang Industrial Pump Factory Co. Ltd (China), Excellence Pump Industry Co.Ltd (China), Kirloskar Ebara Pumps Limited (India), Xylem Inc (U.S.), and Goulds Pumps (U.S.) are among others.

In the drilling business, MTeq uses Energy Recovery"s Pressure exchanger technology as the ultimate engineering solution to boost productivity and lower operating costs in the pumping process by rerouting abrasive fluids away from high-pressure pumps, which helps operators save money on maintenance. The latest trend reveals that regulatory agencies are persuading manufacturers and consumers to choose electric mud pumps over fuel engine mud pumps to reduce the environmental impact of fuel engine mud pumps.

The global mud pumps market is segmented on the basis of type (duplex pump, triplex pump, and others), component (fluid end and power end), application (oil & gas industry and building industry), and Region (North America, Europe, Asia Pacific, and Rest of the World).

Based on type, mud pumps can be segmented as duplex and triplex pumps. Triplex pumps are expected to progress because of the ~30.0% lesser weight than duplex pumps offering similar efficiency. The pump transfers the fluids with the help of mechanical movements.

Based on application, mud pumps market can be segmented as oil & gas industry and building industry. As oil and gas fields going mature, operators must drill wells with large offset, high laterals, widening their applicability by using mud motors, and high-pressure pumps. To fulfill the demand drilling companies increase their mud pumping installation capacity, with higher flexibility. For instance, LEWCO has developed W-3000 mud pump model for oil drilling, which can handle power up to 3000 HP.

Based on region, North America is predominant because of tight oil and shale gas sources, followed by Asia-Pacific due to the increased number of wells in the regions, especially in countries such as China and India due to the rapid urbanization and industrialization. Authorities in countries such as India, China are working on enhancing their production capacities for reducing the import bills, which ultimately help in the growth of mud pumps market.

This market is broadly driven by oil and gas industry as mud pumps are used to move massive amount of sludge and mud at the time of drilling. Countries such as China, Russia, Saudi Arabia, and the U.S. have the largest number of oil wells. The demand for mud pumps will increase with the number of oil wells, across the globe.

The global mud pumps market is projected to grow at a CAGR of 8.0% during the forecast period. As per the mud pumps market research report, the global market for mud pumps is projected to grow swiftly. According to analysts, the increased demand for directional and horizontal drilling as well as a number of new oil discoveries will drive the market growth during the forecast period. The mud pumps market research report offers a comprehensive analysis of the global mud pumps market and its type, applications, and components segments. The high cost of drilling along with changing government regulations are the elements that could influence the mud pumps market advancement throughout the forecast period. The mud pumps market research report by expert analysts is developed to assist organizations in the mud pumps market.

The global mud pumps market has been segmented based on type, applications, and components. On the basis of type, the market for mud pumps is segmented based on duplex and triplex pumps. Additionally, the market on the basis of applications, is segmented into the oil and gas industry and building industry. The global market for mud pumps is also covered based on the components segment which is further split into fluid end and power end.

Major elements such as environmental risks could obstruct the mud pumps market growth. However, according to the mud pumps market research report, higher pressure handling capabilities along with developed infrastructure will propel growth throughout the forecast period. The mud pumps market is set to register growth at a high CAGR owing to these key factors. The exploration of type, applications, and components segments along with regional markets has been given in the global mud pumps market research report. The research analysts studying the mud pumps market have put out market forecasts in the mud pumps market research report in order to support mud pumps market-based companies. The mud pumps market research report provides an extensive understanding of the mud pumps market based on the information and forecasts till 2023.

North America, Europe, Asia Pacific and the rest of the world regional market for mud pumps are predominantly covered in the global mud pumps market research report. Country-level mud pumps markets spread across North America – the United States, Canada, and Mexico are also covered in the report. In South America – Brazil and other country-level mud pumps markets are covered in the report. In Asia-Pacific (APAC) region, the country-level mud pumps markets covered are Japan, India, China, and others. The mud pumps market research report also explores the regional market for mud pumps present in Europe in the United Kingdom, France, Italy, Spain, and Germany, etc. The mud pumps market research report also covers regional markets from the rest of the world alongside mud pumps markets of Africa and the Middle East.

Innovation in technology and companies enhancing production capacities are presumed to drive the mud pumps market growth worldwide. The global mud pumps market could be challenged by unfavorable policies, nevertheless, organizations in the mud pumps market will carry the growth rate forward. The mud pumps market research report presents company profiles of major companies active in the mud pumps market globally. Furthermore, the global mud pumps market report offers an all-inclusive analysis of the market collected from the mud pumps market’s primary and secondary sources covering both decision makers and thought leaders. The mud pumps market research report highlights such key areas assisting businesses operating in the mud pumps market to build better growth strategies.

Managed pressure boiling (MPD) in formations with limited pressure windows has become an approved standard for drilling wells. While MPD is the only option for some wells to perform, the improved success rate for other wells, reduced nonproductive time (NPT) and improved barrier management provided by MPD are also beneficial. MPD operations usually require, at a minimum, a turning control unit (RCD or ACD), a shock collector and a metering speed device. A buffer multiplier, back pressure pump and diversion controls may be additional to the device.

MRFR team have supreme objective to provide the optimum quality market research and intelligence services to our clients. Our market research studies by products, services, technologies, applications, end users, and market players for global, regional, and country level market segments, enable our clients to see more, know more, and do more, which help to answer all their most important questions.

In order to stay updated with technology and work process of the industry, MRFR often plans & conducts meet with the industry experts and industrial visits for its research analyst members.

Global Mud Pump Market, Product Type (Duplex, Triplex, Quintuplex), Driven System (Electric, Fuel Engine), Application (Onshore, Offshore), Country (U.S., Canada, Mexico, Brazil, Argentina, Rest of South America, Germany, Italy, U.K., France, Spain, Netherlands, Belgium, Switzerland, Turkey, Russia, Rest of Europe, Japan, China, India, South Korea, Australia, Singapore, Malaysia, Thailand, Indonesia, Philippines, Rest of Asia-Pacific, Saudi Arabia, U.A.E, South Africa, Egypt, Israel, Rest of Middle East and Africa) Industry Trends and Forecast to 2028.

The mud pump market is expected to witness market growth at a rate of 6.80% in the forecast period of 2021 to 2028. Data Bridge Market Research report on mud pump market provides analysis and insights regarding the various factors expected to be prevalent throughout the forecast period while providing their impacts on the market’s growth. The increase in the use of product in various industries globally is escalating the growth of mud pump market.

A mud pump or drilling mud pump refers to the type of pump that is utilized for circulating drilling mud on a drilling rig at high pressure. The mud is generally circulated down through the drill string, and back through the annulus at high pressures. These are positive displacement pumps and are ideal wherever a lot of fluid needs to be pumped under high pressure.

The increased demand for directional and horizonal drilling across the globe acts as one of the major factors driving the growth of mud pump market. The use of for moving and circulating drilling fluids and other similar fluids in several applications such as mining and onshore and offshore oil and gas, and deployment for transfering fluids at substantially high pressures accelerate the market growth. The rise in the popularity of electric mud pumps as they offer smooth operations in drilling rigs and are environment-friendly, and growth in mineral extraction activities further influence the market. Additionally, expansion of mining industry, rapid urbanization, increase in investments and emergence of industry 4.0 positively affect the mud pump market. Furthermore, surge in number if foreign investors and government initiatives extend profitable opportunities to the market players in the forecast period of 2021 to 2028.

On the other hand, lack of universal directives pertaining to applications of mud pump and stringent regulations are expected to obstruct the market growth. Lack of awareness and less adoption of mud pump is projected to challenge the mud pump market in the forecast period of 2021-2028.

This mud pump market report provides details of new recent developments, trade regulations, import export analysis, production analysis, value chain optimization, market share, impact of domestic and localized market players, analyses opportunities in terms of emerging revenue pockets, changes in market regulations, strategic market growth analysis, market size, category market growths, application niches and dominance, product approvals, product launches, geographic expansions, technological innovations in the market. To gain more info mud pump market contact Data Bridge Market Research for an Analyst Brief, our team will help you take an informed market decision to achieve market growth.

The mud pump market is segmented on the basis of product type, driven system and application. The growth among segments helps you analyze niche pockets of growth and strategies to approach the market and determine your core application areas and the difference in your target markets.

The mud pump market is analyzed and market size, volume information is provided by country, product type, driven system and application as referenced above.

The countries covered in the mud pump market report are the U.S., Canada and Mexico in North America, Brazil, Argentina and Rest of South America as part of South America, Germany, Italy, U.K., France, Spain, Netherlands, Belgium, Switzerland, Turkey, Russia, Rest of Europe in Europe, Japan, China, India, South Korea, Australia, Singapore, Malaysia, Thailand, Indonesia, Philippines, Rest of Asia-Pacific (APAC) in the Asia-Pacific (APAC), Saudi Arabia, U.A.E, South Africa, Egypt, Israel, Rest of Middle East and Africa (MEA) as a part of Middle East and Africa (MEA).

Asia-Pacific dominates the mud pump market due to the increase in number of oil wells and high investment within the region. North America is expected to witness significant growth during the forecast period of 2021 to 2028 because of the high production of oil and gas in the region.

The country section of the report also provides individual market impacting factors and changes in regulation in the market domestically that impacts the current and future trends of the market. Data points like down-stream and upstream value chain analysis, technical trends and porter"s five forces analysis, case studies are some of the pointers used to forecast the market scenario for individual countries. Also, the presence and availability of global brands and their challenges faced due to large or scarce competition from local and domestic brands, impact of domestic tariffs and trade routes are considered while providing forecast analysis of the country data.

The mud pump market competitive landscape provides details by competitor. Details included are company overview, company financials, revenue generated, market potential, investment in research and development, new market initiatives, regional presence, company strengths and weaknesses, product launch, product width and breadth, application dominance. The above data points provided are only related to the companies’ focus related to mud pump market.

The major players covered in the mud pump market report are NOV Inc., Schlumberger Limited., Gardner Denver, Weatherford, Flowserve Corporation., Honghua Group Ltd., China National Petroleum Corporation, Trevi Finanziaria Industriale S.p.A., MHWirth, Bentec, American Block, White Star Pump, Ohara Corporation, Herrenknecht Vertical GmbH, Mud King Products, Grundfos Holding A/S, Halliburton, Sulzer Ltd, KEPL, and EPIC Corporation., among other domestic and global players. Market share data is available for global, North America, Europe, Asia-Pacific (APAC), Middle East and Africa (MEA) and South America separately. DBMR analysts understand competitive strengths and provide competitive analysis for each competitor separately.

In regional analysis, Mud Pumps Market research report provides a detailed analysis of various regions and also contains a detailed analysis of the country. Along with market revenue, the market value report also offers a forecast analysis for the following countries and regions. The Global Mud Pumps Market report covers various geographical regions such as North America, Asia-Pacific, Europe, Latin America, and Middle East and Africa.

Report consists the of in-depth information related to the region/countries, major key players, current trends and their analysis, product type, applications, and other background information

The market area, which is further segmented into sub-regions and nations/regions, is covered in the Market research. This chapter of the research includes details on profit prospects in addition to market share data for each region and subregion.North America(United States, Canada, and Mexico)

The 2,200-hp mud pump for offshore applications is a single-acting reciprocating triplex mud pump designed for high fluid flow rates, even at low operating speeds, and with a long stroke design. These features reduce the number of load reversals in critical components and increase the life of fluid end parts.

The pump’s critical components are strategically placed to make maintenance and inspection far easier and safer. The two-piece, quick-release piston rod lets you remove the piston without disturbing the liner, minimizing downtime when you’re replacing fluid parts.

Please try again in a few minutes. If the issue persist, please contact the site owner for further assistance. Reference ID IP Address Date and Time d94a2288d76f819e65e1cc71545d07c7 63.210.148.230 02/19/2023 09:19 AM UTC

We supply pumps for - Flood relief | Ground water control | Mine dewatering | Well point dewatering | Industrial sludge pumping | Emergency pumping | Sewage over-pumping.

All of our used pumps are fully tested and serviced to be in good working order. If necessary repainted to our standard red finish (other colour options available at extra cost).

Normally 3 month return to base warranty is given for used pumps sold within mainland England, Wales and Scotland excluding the following postcodes: FK, KY, PA, PH, DD and the Highlands. Please contact us for further details.

Please note that pump photographs on this page are for general guidance only and may not depict the actual pump offered. All ex-rental, ex-hire, pre-owned and refurbished water pumps supplied in excellent condition.

Driven by a Volvo TWD1240VE radiator cooled, electric start diesel engine. Mounted on a skid base frame with steel crash frame, forklift pockets, central lifting eye and corner lifting points.

76mm solids handling capability and wet priming system ideal for industrial, flood relief, sewage by-pass, over-pumping and other commercial applications.

Driven by a Perkins 1104C-44TA radiator cooled, electric start diesel engine mounted on a skid base frame with rain cover, chassis integral fuel tank, forklift pockets, centre lifting point and starter control panel.

Driven by a Perkins 403D-15 radiator cooled, electric starter diesel engine. Mounted in a hushpac sound attenuated canopy on a 2-wheel road tow trailer with ball hitch. Also features bunded chassis integral fuel tank, and control starter panel that allows for remote telemetry monitoring along with emergency stop, variable speed throttle and float inputs.

Mounted on a skid base with crash frame, dip tray under engine, chassis integral fuel tank, centre + corner lifting points, forklift pockets and control start panel.

Each pump is fitted with a Hydovar variable speed drive allowing for contact pressure or flow rates varing between 10-70m and flow rates 1-11.75lps depending on set-up.

Mounted in a hushpac sound attenuated canopy with lifting frame, chassis integral bunded fuel tank, forklift pockets and engine mounted compressor for Godwin’s Dri-prime venturi automatic self-priming system.

Driven by a Perkins 1104 radiator cooled, electric start diesel engine. Mounted in a sound attenuated box canopy with central lifting eye, forklift pockets and chassis integral bunded fuel tank.

Driven by a Deutz radiator cooled, electric start diesel engine model D2009L03. Mounted in a sound attenuated canopy with central lifting eye, chassis integral bunded fuel tank, and 25cfm vacuum pump priming system incorporating priming tank and non-return valve fitted on discharge.

Driven by a Iveco, radiator cooled, electric start diesel engine mounted on a skid base frame with central lifting eye, guarding and vacuum pump priming system.

Ideal for Emergency pumping services, Docks, ports and harbours, Refineries, Water and waste treatment, Local authorities, Offshore and float outs, Quarries and mines, Building and construction, Manufacture and industry, Power stations, Tunnelling, Agriculture.

Driven by a Isuzu, radiator cooled, electric starter diesel engine model 4LE2 mounted in a gull wing door sound attenuated canopy with variable speed throttle, central lifting eye, chassis integral bunded fuel tank and SPP’s vacuum priming system with automatic clutch to disengage vacuum pump when primed.

Driven by an electric start diesel engine with options available for 4-wheel site tow trailer or skid base frame all included with chassis integral fuel tank and central lifting eye.

Fitted with 25cfm automatic vacuum self-priming system incorporating priming float tank and non-return valve fitted to discharge. Suitable for dry suction lifts of a maximum 8.5m though 6m or less is recommended.

Fitted with 60cfm automatic vacuum self-priming system incorporating priming float tank and non-return valve fitted to discharge. Suitable for dry suction lifts of a maximum 8.5m though 6m or less is recommended.

Fitted with a compressor priming system incorporating priming tank and non-return valve fitted on discharge. Suitable for dry suction lifts up to 8.5m though 6m or less is recommend.

New SPP/Kirloskar horizontal spilt case pump with twin stage impellers complete with packed gland seal and stainless steel shaft. Fitted with 6” NP16 flanged suction and delivery branches.

Kirloskar 150mm x 125mm DSM 125-4 split-casing pump being two stage impeller manufactured in quality cast iron, bronze type wear rings, stainless steel shaft with multi ring packed glands and outboard bearing.

This pump is fitted with SPP Automatic Priming equipment with a 25CFM vacuum pump being oil lubricated. All mounted on robust chassis fuel tank frame with central lifting frame and fork lift pockets.

Mounted on a skid base with crash frame, corner lifting eyes, guards and forklift pockets. Controlled via a DeepSea E800 LED digital display panel with push button start, variable speed adjustment, emergency stop and battery isolator.

Driven by a Duetz air-cooled, electric start diesel engine model F4M2011. Mounted in a sound attenuated box canopy on a twin axle road tow trailer with ball hitch, central lifting and forklift pockets.

Driven by a Hatz 4M41 air-cooled, electric start diesel engine mounted in a sound attenuated box canopy with forklift pockets and central lifting. Set also features chassis integral bunded fuel tank, diaphragm self-priming system, battery isolator, anderson plug and on/off probes with at least 10m of cable attached.

Ideal for site drainage, raw/process water, storm/flood water, emergency pumping, sewage over pumping, sludge, slurry, bentonite, viscous liquids and other industrial applications.

Driven by a JCB radiator cooled, electric start diesel engine model TC-63 mounted in a sound attenuated canopy with central lifting eye, forklift pockets, chassis integral bunded fuel tank and automatic self-priming diaphragm pump system.

Set includes a separate electric motor driven vacuum priming system incorporating priming tank and non-return valve fitted on discharge allowing for dry suction lifts of up to 8.5m though 6m or less is recommended.

Should you be stuck for power why not consider a diesel engine generator. This can be situated remote from the pump. Please note this can be offered at extra cost.

Fitted with Godwin’s high pressure bath mechanical seal design allowing for dry running for prolonged periods while automatically priming and re-priming with a compressor system.

Fitted with Xylems N-Impeller for improved solids handling of large soft solids or long fibrous material. Fitted with Godwin"s Dri-Prime ejector system enabling automatic self-priming suction lifts of 8.5m though 6m or less is recommended.

Fitted with Selwood’s water resistant diaphragm pump for automatic self-priming from suction lifts of 8.5m though 6m or less is recommended and a mechanical seal running in a oil bath which allows running dry without damage.

Driven by a radiator cooled, electric starter Perkins diesel engine mounted in a sound attenauted canopy with chassis integral fuel tank, central lifitng eye, forklift pockets, varible speed throttle, externally mounted emergancy stop button, battery isolator and diaphragm priming system.

The multi-vane open impeller is designed for high efficiency operation while still handling solids up to 30mm spherical diameter. ;Discharge flow rates and heads dependent on motor sizes. Motors can be supplied at an extra cost.

New and unused ETL50-1-120A in-line aviation fluid pump with 2” DN50 flanged suction and delivery branches. Close coupled to a ATEX approved Siemans, TEFC 3kw, 440v, 60hz electric motor.

New and unused ETL50-3-200A in-line aviation fluid pump with 1.1/2” DN40 flanged suction and delivery branches. Close coupled to a ATEX approved Siemans, TEFC 11kw, 440v, 60hz electric motor.

The pump type ETL (OH5) vertically in-line mounted, close coupled, radial split case, single stage, single suction, heavy duty centrifugal process pumps.

The design complies with the latest edition of the American Petroleum Institute standard "Centrifugal Pumps For General Refinery Services", also known as API 610/ ISO13709.

The in-line configuration is a compact pumping solution with mounting the impeller to an extended motor drive shaft presents a very compact pumping solution. The ETL (OH5) offers a space saving footprint and eliminates expensive baseplates. (This pump is also available in long coupled pump type ETLS (OH3) for high temperature applications)

Ideal for Fluid handling in oil refineries and petrochemical industry, High temperature and high pressure critical applications in chemical and allied industry, Upstream, pressure booster, Midstream, process transfer, bottom reflux, propane/butane/LPG handling, diesel oil/gasoline/naphtha/lube oils etc., sodium carbonate/caustic sour water, MEA/DEA/TEA, Fertilizer, carbonates/lean and semi lean solutions, NH3 feed, other removals, Power plant, Hot water circulation, condensate transfer, fuel oil, Onshore/Offshore installations, FSPO platforms, Hydrocarbon storage, Liquid gas plants.

The Spate 3B pump can handle dirty water, slurries, light and heavy oils. Can also handle petroleum industry products, including some of the more viscous liquids, at a high, non-turbulent flow rate.

These centrifugal pumps with closed impeller, feature a unique agitator design. This agitator lifts sediments into suspension, creating a slurry mixture and enables the continuous pumping of media with a high concentration of solids.

Robust construction, careful selection of materials and unique contour components have produced a pump with excellent abrasion resistance which, coupled with a low speed high torque motor, ensures long service life and economical operation.

LVA505 end suction pump with 6” flange suction and 4” flange delivery branches. Long coupled to a 45kw, 4pole, 415v TEFC electric motor mounted on a base frame with coupling guard.

New BP235K 6 stage diaphragm pump c/w safety relief valve belt driven by a Hatz electric start diesel engine model 1D90Z with at least 3 hour running integral fuel tank.

The unit is mounted on a skid base with forklift pockets and protective steel frame. The pump can produce between 162 and 222 l/m depending on engine speed at a constant 20bar pressure.

Supplied with 5m of 2 inch suction hose, 2 inch foot-valve with strainer, 20m of 1 inch clear braided hose for relief valve, pressure gauge and 1.1/4 inch female BSP outlet in addition to a complete set of spare belts.

Nearly new Calpeda NM25/16AE Pump with 1.1/2 inch female BSP suction and 1 inch BSP female delivery connections coupled to a 1.5kw, 415 volt, 50hz TEFC electric motor.

Capable of a maximum flow rate of 3.6 m 3 / hr at a maximum head of 49.4m. This pump has a 1 / 4 inch BSP. Suitable for pressure boosting applications.

Ideal for Agriculture, Water Supply and Treatment (oil and gas), Food, Cooling Water, De-watering and Water Supply (mining), Ground Water Development and Irrigation, Water Supply and Distribution (water), Flood Control in flooded suction applications.

New - Unused Xylem / Lowara MP100.1/6A horizontal multistage Vogal pump with enlarged 8" flanged suction and reduced 3" Vitriolic discharge connection.

Long coupled to a 2 pole, 160kw, 50hz, 415v electric TEFC motor base mounted complete with coupling guards, valves fitted to both suction and delivery, along with a Mahle filter mounted on the discharge side of the pump.

Portable Submersible Pump & Hose Trolley built for customer to enable multiple bores to be sampled in multiple areas. Complete with panel for full variable speed control and ‘plug & play’ ease of use

Food Grade Neoprene or Nitrile impeller, Carbon/ceramic mechanical type seal, this unit can be used for the safe pumping of food grade products and materials.

Used Worthington Simpson 6L13 split case pump with 8” flanged suction and 6” flanged delivery branches. Long coupled to a 132kw, 50/60hz 2pole TEFC electric motor mounted on a base frame complete with coupling guard.

Please note that pump photographs on this page are for general guidance only and may not depict the actual pump offered. All ex-rental, ex-hire, pre-owned and refurbished water pumps supplied in excellent condition.

We have available for sale a range of used 2” metallic and non-metallic air driven diaphragm pumps. Sold fully checked, tested and re-painted prior to dispatch.

We have available for sale a range of used 2” metallic and non-metallic air driven diaphragm pumps. Sold fully checked, tested and re-painted prior to dispatch.

We have available for sale a range of used 2” metallic and non-metallic air driven diaphragm pumps. Sold fully checked, tested and re-painted prior to dispatch.

We have available for sale a range of used 2” metallic and non-metallic air driven diaphragm pumps. Sold fully checked, tested and re-painted prior to dispatch.

The diaphragm operates in a balanced condition during the discharge stroke which allows the pump to be operated at discharge heads of over 200 feet (61 metres) of water.

The diaphragm operates in a balanced condition during the discharge stroke which allows the pump to be operated at discharge heads of over 200 feet (61 metres) of water.

The ARO Diaphragm Pump offers high volume delivery even at low air pressure. ARO pumps feature stall resistant design, modular air motor / fluid sections.

For sale we have a yellow chemical cabinet. This cabinet which has a lockable door and COSHH instructional documentation inside also has two ARO IR Intersol Pumps, Diaphragm Air pumps with a typical flow rate of 35gpm subject to air flow.

The above descriptions are provided in good faith, we do our best to offer factual information on all used equipment. "we as a result of selling two used generators, we had provided incorrect operational hours, which had been relayed onto a customer by mistake". We do our best to offer factual information however we take no responsibility for any or all information provided written or oral.

Having stated the forgoing we undertake to provide a quality service with every sale. We limit our liability to repair - replacement and transport costs. (for the record we paid tens of thousands to a company as we standby our values, by negotiation. Not legal).

“The global Mud Pumps Market size is expected to be worth around US$ xx Billion by 2021 from US$ X.xx million in 2031, growing at a CAGR of X.x% during the forecast period 2021 to 2031.”

Mud pumps are usually driven by electric or diesel motors which are designed to move heavy mud or sludge. Mud pumps are similar to trash pumps, sludge pumps, and sewage pumps and comes in different varieties from small, huge as well as high pressure pumps. Large mud pumps are majorly used for petroleum drilling rigs and smaller versions of mud pumps are used for industrial, construction, and water system usage.

increasing demand for mud pumps for rapidly growing directional and horizontal petroleum drilling activities is expected to drive growth of the target market. For instance, in May 2017, Energy Recovery, Inc., the leader in pressure energy technology for industrial fluid flows, had launched MTeq which is a pumping solution engineered to increase productivity and reduce operating costs in the mud pumping process in oil & gas drilling applications. In addition, increasing investment in R&D activities for product innovations in terms of technology, performance, shelf life, features, and design for mud pumps, is also expected to bolster growth of the target market over the forecast period.

Latest trend shows that, regulatory agencies are convincing manufacturers and consumers to opt for electric mud pumps to lessen the impact of fuel engine mud pumps on the environment. Moreover, rising demand for pumps coupled with increasing oil & gas exploration activities is about to create an opportunity for the target market.

On the basis of type, the global market is segmented into duplex, triplex, and quintuplex. The triplex segment account for significant market share, owing to extensive oil & gas exploration activities.

By mode of operation, the global market is segmented into electric and fuel engine. Fuel engine in terms of segment accounts for major market share revenue and is expected to maintain its dominance over the forecast period. However, the electric mode of transaction segment is expected to grow at a higher rate during the forecast period.

The market in North America is expected to dominate the global mud pumps market in terms of revenue. Factors such as technological advancements and growing unconventional resources /reserves in countries such as US and Canada in the region. For example, in 2014, LEWCO, Inc. has developed W-3000 mud pump model for oil drilling, which can handle power up to 3000 HP.

The market in Asia Pacific accounted for second-highest revenue share in the global mud pumps market, followed by markets in Middle East & Africa, Europe, Latin America, and respectively. Further, countries such as China and India have experienced a substantial growth due to increasing mining activities and natural gas import and export activities. The Middle East & Africa is also expected to propel growth of the target market during the forecast period, owing to recent discovery of offshore oilfields in countries such as Egypt, Tanzania, and Mozambique.

United States, Canada and Mexico, Germany, France, UK, Russia and Italy, China, Japan, Korea, India and Southeast Asia, Brazil, Argentina, Colombia etc.Saudi Arabia, UAE, Egypt, Nigeria and South Africa

A high pressure mud pump is a reciprocating plunger pump which is designed to circulate drilling fluid under high pressure down the drill string and back up the annulus.

With the increasing in new launches and the dependency on the sustainable solutions is increasing which is anticipated to augment the growth of the global mud pumps market during the forecast period.

The increasing demand and sales of oil & gas exploration activities and related equipments is rising in emerging nations because of rising population and increasing petroleum drilling activities across the globe and supporting the growth of the market in the years to come.

Directives and legislations changes with different counteries is pertaining to the use of mud pump. Players find it difficult to meet such country-wise legislations. This can discourage investment in the mud pump market, thereby adversely affecting the growth of the market.

Schlumberger, Ohara Corporation, White Star, Weatherford International, Bentec, CNPC, Gardner Denver, National Oilwell Varco, MHWirth, Honghua Group, American Block, HERRENKNECHT VERTICAL, Trevi Finanziaria Industriale

market are Schlumberger, Ohara Corporation, White Star, Weatherford International, Bentec, CNPC, Gardner Denver, National Oilwell Varco, MHWirth, Honghua Group, American Block, HERRENKNECHT VERTICAL, Trevi Finanziaria Industriale

are Schlumberger, Ohara Corporation, White Star, Weatherford International, Bentec, CNPC, Gardner Denver, National Oilwell Varco, MHWirth, Honghua Group, American Block, HERRENKNECHT VERTICAL, Trevi Finanziaria Industriale