mud pump lubrication system manufacturer

Continental Emsco Drilling Products, Inc., which consisted of Emsco drilling machinery and Wilson mobile rigs, was purchased by National-Oilwell, Inc on July 7, 1999. To our knowledge, no pumps have been manufactured and sold under the Emsco brand name since National-Oilwell acquired them.

Fairbanks Morse pumps are currently manufactured in Kansas City, Kansas. Fairbanks Morse is a division of Pentair ever since August, 1997 when Pentair purchased the General Signal Pump Group.

Gaso pumps are manufactured by National Oilwell Varco. Gaso was acquired as "Wheatley Gaso" by National-Oilwell in the year 2000. At the time, Wheatley Gaso was owned by Halliburton.

Skytop Brewster pumps are no longer available as new pumps. Skytop Brewster(Cnsld Gold), a unit of Hansen PLC"s Consolidated Gold Fields subsidiary, was acquired while in bankruptcy by National-Oilwell, Inc. in November, 1999.

Central lubrication manifold system with Stainless Steel tubing for feeding all main, eccentric, and pinion bearings. Pressurized lubrication is also provided to the upper and lower crosshead slide for longer crosshead life

The 2,200-hp mud pump for offshore applications is a single-acting reciprocating triplex mud pump designed for high fluid flow rates, even at low operating speeds, and with a long stroke design. These features reduce the number of load reversals in critical components and increase the life of fluid end parts.

The pump’s critical components are strategically placed to make maintenance and inspection far easier and safer. The two-piece, quick-release piston rod lets you remove the piston without disturbing the liner, minimizing downtime when you’re replacing fluid parts.

Distributor of engineered fluid handling pumps, packaged pumping systems, repairs, parts, & integrated pump control systems. Mud pumps, chiller/condenser pumps, plumbing pumps, boiler feed systems, in-line circulators, condensate systems, sump & sewage pumps, end suction pumps, submersible sump & sewage, non-clogs & grinders, self primers, packaged lift stations, variable speed pump systems, metering pumps, chemical injection systems, chemical mixing systems, peristaltic pumps for chemical feed, high viscous & shear sensitive fluids, self primers, stainless steel, trash pumps, hot oil pumps, vertical turbine pumps, sanitary pumps, marine pumps, industrial pumps, ANSI end suction, vertical cantilever, double suction, non-clogs, progressive cavity pumps, helical gear pumps, well pumps, lab pumps, hose pumps, control valves, check valves, air release valves, tanks, pressure vessels.

Our manufacturer Mud Pump skid is suitable for operations in rough, windy, damp and dusty oilfield conditions. Dependent upon customer horsepower requirements the engine sizes will vary.

All equipment is rated for operating at ambient temperatures up to +120 Deg F at 1200 ft altitude. The unit is built on heavy duty oilfield skid with lift frame. The control system is mounted in a stainless steel box on the side of the unit. The digital display provides all important engine and transmission data. Unit is also equipped with emergency kill function.

Bentec completely redeveloped the concept of Mud Pumps. Being equipped with a direct-driven gearbox, an own developed motor, and a state-of-the-art pump housing, there is no need for an internal gear coming with many disadvantages and no more belt tensioning.

Bentec Mud Pumps are light weight and have a small footprint. The AC-powered motor is top or rear mounted – suitable for any drilling rig arrangement. The pump is available with 5 000 or 7 500 psi fluid ends, and all its parts that are subject to wear and tear meet API standards and are available worldwide.

A handling crane makes it easy to handle the fluid end components. Furthermore, Bentec uses a patented liner and valve clamping technology to reduce the maintenance time significantly. A quick-change liner and piston system serves for easy maintenance. A special feature of the Bentec MUD PUMP is the side-mounted gear drive.

This design eliminates the need for chain or belt tensioning systems. The two-stage helical gear feeds directly into a forged/welded crankshaft, which is balanced and provides quiet and vibration-reduced operation.

Liner cooling and gear oiler systems are included; a supercharge pump and a noise reduction package can be installed upon request. The Bentec MUD PUMP is the right choice especially when it comes to noise-sensitive environments such offshore or densely populated environments.

Beyond the supply of Mud Pumps, Bentec acts as system supplier. The pumps can be delivered together with a Bentec Power Control System and a Bentec Soft Pump System.

The system provides for a simpler operation and consistent tightening of the plug. Tests have shown the plug can be installed, tightened (for sealing) and disassembled in less than 2 minutes !!. Read More

Mud pumps are the heart of a drilling operation. TSM designs and manufactures extremely reliable and easy-to-maintain mud pumps, eliminating unnecessary maintenance and downtime.

The 2S gear oil pump is the main element for the lubricating system of the power end for mud pump. This lubricating oil pump is usually installed on the pressure lubrication system, offering lubricating oil for crosshead, crosshead bearing, extension rod, etc.

The corrugated bellow is a kind of tubular elastic rubber product which is connected using a corrugated piece for the mud pump from LANSHI and QINGSHI factories. It plays a role in separating and sealing between the fluid end and the power end of a mud pump. Dezhou Rundong Petroleum Machinery Co., Ltd. is capable of producing different models of corrugated pipes. Our company holds an independent rubber accessory factory and the first self-invented rubber injection machine in China. After injection, the raw material can be vulcanized and completed in an integrated mould for only once, which ensures both performance and lifespan of the corrugated bellow.

The plug is an important part for the fluid end of mud pump in oil drilling. Its front part is equipped with cylinder head (valve cover) sealing ring for the sealing and pressure maintaining of a hydraulic cylinder. A top-grade suitable plug is adopted to improve the cylinder head plug loading condition and also increase the bearing capacity and service life. Plugs made by RUNDONG Company cover a full range of pumps from BAOSHI, LANSHI and QINGSHI factories. All of them adopt high quality alloy carbon steel made by domestic steel plants. They are finished by means of high temperature forging, heat treatment and CNC machining so as to achieve guaranteed geometric size, sealing performance, increased durability and wear resistance.

The locking clip is a part of the fluid end of F series mud pump from BAOSHI factory. It has the function of fixing and supporting the guide inside a hydraulic cylinder. The product produced by RUNDONG Company is made from superior quality brass. After being heated, it is bended and completed with specialized equipment for increased wear resistance and extended service life.

The stuffing box is an important component for the power end of mud pump in oil drilling. It plays a crucial part in sealing the lubricating system and the operation inside power end. Its housing produced by RUNDONG Company is precisely cast from ductile cast iron beyond industrial standard for improved mechanical properties and elongation. The adoption of heat treatment and phosphating technology helps eliminate the internal stress generated from the casting process and also improves corrosion resistance. After CNC finish machining, it is tightly assembled with wear-resistant rubber, vulcanized oil seal and sealing ring, as well as the nylon oil seal ring made by the machining center. In this way, the service life of sealing elements inside the stuffing box assembly could be greatly extended. This product is well received by clients.

The cylinder head plug is a vital part for the fluid end of mud pump in petroleum drilling. A high quality suitable plug is adopted for improved loading condition as well as increased bearing capacity and lifespan. The product made by RUNDONG Company covers a full range of BAOSHI, LIANSHI and QINGSHI brand pumps. It is derived from top grade alloy carbon steel made by domestic steel plants. Besides, this product is completed with high temperature forging, heat treatment and CNC machining technology so as to guarantee the geometric size, sealing performance as well as increased durability and abrasion resistance.

The piston rod nut is a kind of anti-loosening nut for the end of piston rod. In common with the material of piston rod, it is made from superior quality alloy steel. The head of the product manufactured by RUNDONG Company is filled with a wear-resistant high strength nylon gasket so as to prevent rod thread from abrasion or being impacted by mud when in use of a piston rod. After heat treatment, this product offers better mechanical property. All models of piston rod nuts in metric and imperial units from BAOSHI, LANSHI, QINGSHI and other factories can be produced to meet the needs of customers.

The discharge filter screen assembly is a main component of the outlet for the fluid end of mud pump in petroleum drilling. It is composed of filter screen assembly, housing assembling as well as sealing ring, end cover and other accessories. The integrated formed filter screen housing made by our company adopts casting technique. The filter screen assembly is manufactured from superior quality alloy steel and assembled after CNC machining. This not only provides excellent corrosion resistance and pressure resistance, but also helps customers increase production efficiency.

The effectiveness of triplex mud pumps for sale determines the success of drilling operations in rigs. Circulation of the drilling fluid or mud is a continuous process that calls for uninterrupted operations of the mud pumps. Finicky about how our equipment work, we at ShalePumps, go to extreme lengths before engineering modern beasts for continuous drilling operations in rigs.

Our state of the art Houston facility develops high performing mud pumps for drillings rigs by a combination of the best materials, and structural dynamics to put together some of the best equipment. Designed to be adapted for various drilling applications in rigs through designs that incorporate various liner sizes, the triplex mud pumps for sale that leave the assembly line at ShalePumps are mean and mighty workhorses. The triplex mud pumps feature high performance steel power ends, balanced forged steel crankshaft, steel herringbone gears and anti-friction roller bearings. Striking the right balance between weight and performance, the triplex mud pumps for sale we make are best for drilling operations in rigs.

The triplex mud pumps manufactured at ShalePumps have extended continuous duty cycles, and foolproof lubrication systems for smooth drilling operations in rigs. With mud pumps from ShalePumps the drilling operations in rigs will never be the weak link, but a pivot that spells success.

ShalePumps, LLC is proud to introduce the SP-1614 1600 HP Continuous Duty Triplex Drilling Pump. Engineering and rated for 1600 horse power at 110 strokes per minute with a 14” stroke capable of 7500 PSI. Manufactured in our Houston Texas facility, this pump defines longevity, quality and capability. The SP-1614 is designed to incorporate minimum weight and maximum performance using a high performance steel power end, a balanced forged steel crank shaft, steel herringbone gears and anti friction roller bearing throughout. Multiple liner sizes are available to allow variance in pressure and output volume for a variety of drilling applications. Download the performance chart for more detailed information.