mud pump maintenance training for sale

DAC Worldwide’s Surge Suppressor Model (295-403) depicts a high-fidelity, precision to-scale model of a pulsation damper, otherwise known as a surge absorber. The industrial model supports training in the operation and maintenance of mud pumps, and mud pumping systems found within oilfield facilities and other applications incorporating large reciprocating pumps.

Learners will explore design, construction, operation, and control of surge suppressors using these learning tools. The model features a clear acrylic shell, component cutaways, color coding, and realistic detail, which combine to make this a useful tool in both operations and maintenance training.

The construction of this realistic mechanical model is based on a variety of well-known pulsation dampener. Based on a unit manufactured by Hydril Corporation, this training aid is a complete to-scale replication of one of the most common dampeners in use today. Molded from urethane plastics using silicone rubber molds, all salient and important equipment details are shown and enhanced.

Its convenient size, detail, color-coding, and multiple cutaways combine to allow the device to be useful in courses covering surge suppressors, flexible diaphragm stabilizers, valve guards, and much more. This teaching aid complements courses in oilfield production activities, oil & gas production operations, and maintenance training.

This Surge Suppressor Model features a clear acrylic, 4.5-inch diameter shell, including a 120-degree sectioned area, that allows complete visibility of both internal and external components. To ensure an ideal training experience, the model also includes a durable PVC base, with provisions for tabletop mounting. All of the construction throughout the model is to-scale, and the perfect 3-dimensional solution for study, promotion, and training.

The Surge Suppressor Model is only one of DAC Worldwide’s expansive mechanical training models and cutaways, which includes a Gas Turbine Model (295-301), a Pumpjack Package Model (295-408), a Composite Crude Oil Desalter Training Model (295-501), and many more!

Learning about the operation and maintenance of any important asset is the first step in optimizing its performance and reliability. This task is made easier when the participants have the opportunity to get a hands-on training for pumps and inspect the components in person. Sulzer’s training courses give customers the opportunity to gather essential information and knowledge from industry experts.

Pump training courses can include many aspects, from operation and maintenance to design and rerates; every aspect can be tailored to individual requirements. As a major pump original equipment manufacturer (OEM) and independent maintenance provider, Sulzer combines expertise and experience in its flexible and dynamic training courses.

The training seminars focus on the issues and concerns that are prominent in many industrial sectors. They can help companies to meet the demands for increased efficiency and availability as well as addressing any safety matters.

Typically planned over four days, the Sulzer Academy delivers training seminars that can include participants from different employers but with similar backgrounds and operational environments. Discussing many topics from basic principles to root cause analysis and operational challenges, courses are designed to share knowledge and expertise to the benefit of all involved.

Companies send operators and maintenance engineers to Sulzer locations for training by experts in pump design and operation. Through better understanding of pumps and their role in the wider process operations, it is possible to improve the availability, efficiency and costs associated with pump performance.

Sulzer is a global leader in fluid engineering. We specialize in pumping, agitation, mixing, separation and application technologies for fluids of all types. Our customers benefit from our commitment to innovation, performance and quality and from our responsive network of 50 world-class manufacturing facilities and 100 service centers across the globe. Sulzer has been headquartered in Winterthur, Switzerland, since 1834. In 2018, our 15’500 employees delivered revenues of CHF 3.4 billion.

Triplex plunger-type mud pumps feature a reciprocating, positive displacement pump design utilizing three plungers to safely transfer high-viscosity fluids under high pressure over an extended depth. Although they have many industrial applications, these pumps have become an essential part of oil well drilling rigs where they’re used to provide smooth discharge of mud and debris from oil wells.

In addition to their use in drilling and well service operations, mud pumps are also frequently used to handle corrosive or abrasive fluids, as well as slurries containing relatively large particulates, in applications like commercial car washes, wastewater treatment, cementing, and desalination operations.

DAC Worldwide’s Representative Triplex, Plunger Mud Pump Dissectible (295-418) is an economical, conveniently-sized triplex plunger-type mud pump assembly that teaches learners hands-on maintenance activities commonly required on larger mud pump assemblies used in upstream oilfield production operations.

For example, mud pump assembly is used on well sites maintain downhole backpressure, to lubricate the rotating drill bit, and to help recycle and remove rock debris resulting from drilling activities. These heavy-duty, high-pressure pumps require regular refurbishment, inspection, and repair in the field.

DAC Worldwide’s dissectible mud pump assembly is a realistic sample that’s similar in geometry, design, and operating characteristics to the larger varieties learners will encounter on the job. DAC Worldwide chooses popular name-brand pumps for its dissectibles to ensure industrial and oil and gas training relevancy.

Using the dissectible mud pump, learners will gain hands-on experience with the operating principles, regular maintenance activities, and nomenclature/parts identification at a more convenient scale in the classroom or lab.

Technical training is most effective when learners can gain hands-on practice with industry-standard components they’ll encounter on the job. The Representative Triplex, Plunger Mud Pump Dissectible features a wide variety of common, industrial-quality components to provide learners with a realistic training experience that will build skills that translate easily to the workplace.

The Representative Triplex, Plunger Mud Pump Dissectible is a sturdy unit with a complete triplex, reciprocating, 20+ bhp plunger pump with .75" plunger, 1.5" stroke, and 3" cylinder sleeve. The unit allows for complete disassembly, assembly, and inspection, including removal of plungers, packing, and valves.

The dissectible mud pump comes with a formed-steel, powder-coated baseplate. It can also be mounted on a compatible DAC Worldwide Extended Electromechanical Workstation (903). Each unit comes with the manufacturer’s installation and maintenance manual.

Graduates of the program have found that their newly improved maintenance skills have extended the life of the fluid ends on their site. Beyond increasing lifespan, customers have also seen benefits in the form of lower repair costs, decreased production costs and a reduction in workplace hazards.

Pump University’s knowledgeable instructors teach customers valuable maintenance tips through workbooks, visual presentations and hands-on training. Each three hour class can accommodate 10 to 15 employees. The classes are designed for drilling hands, but engineers and other employees have found value in the courses. Many participants find that these courses teach them about expendables as well as fluid ends.

Pump University participants receive a certificate upon completion of the program. The certification verifies Pump U graduates are equipped with the most up-to-date knowledge of fluid end maintenance practices.

Pump University is just one part of GD Energy Products’ continually growing service options. GD Energy Products makes the most durable pumps and fluid ends in the industry, and proper maintenance training ensures customers can maximize the life of their GD Energy Products products while minimizing costly downtime.

Black-Jack Grout Pumps, Inc. offers more than 50 years of combined experience in Slabjacking, Mudjacking, Foundation Pier Repair, grout mixing, and grout pumping.

Through our experience and technical expertise within the grout pump and mortar pump industry, we offer the latest solutions in Grout Pumping, Mud Pumping, and Concrete Pumping across a large variety of applications.

From the most versatile grout pumping system on the world-wide market, “The Black-Jack Grout Pump,” to all the necessary training and advice to make your company successful in the industry, Black-Jack Grout Pumps, Inc. has the equipment, supplies, and training you need.

Our manufacturer Mud Pump skid is suitable for operations in rough, windy, damp and dusty oilfield conditions. Dependent upon customer horsepower requirements the engine sizes will vary.

Preferred Pump offers the best rewards program in the water well equipment industry. Check out our social media pictures to see what you"ve been missing!

The positive displacement mud pump is a key component of the drilling process and its lifespan and reliability are critical to a successful operation.

The fluid end is the most easily damaged part of the mud pump. The pumping process occurs within the fluid end with valves, pistons, and liners. Because these components are high-wear items, many pumps are designed to allow quick replacement of these parts.

Due to the nature of its operation, pistons, liners, and valve assemblies will wear and are considered expendable components. There will be some corrosion and metallurgy imperfections, but the majority of pump failures can be traced back to poor maintenance, errors during the repair process, and pumping drilling fluid with excessive solids content.

A few signs include cut piston rubber, discoloration, pistons that are hard to remove, scored liners, valve and seat pitting or cracks, valve inserts severely worn, cracked, or completely missing, and even drilling fluids making their way to the power end of the pump.

The fluid end of a positive displacement triplex pump presents many opportunities for issues. The results of these issues in such a high-pressure system can mean expensive downtime on the pump itself and, possibly, the entire rig — not to mention the costly repair or replacement of the pump. To reduce severe vibration caused by the pumping process, many pumps incorporate both a suction and discharge pulsation dampener; these are connected to the suction and discharge manifolds of the fluid end. These dampeners reduce the cavitation effect on the entire pump which increases the life of everything within the pump.

Poor maintenance — such as improper valve and seat installation — is another factor. Improper cleaning when replacing a valve seat can leave sand or debris in the valve seat area; preventing the new seat from properly forming a seal with the fluid cylinder, causing a pathway for a washout to occur. It is important to pull up on a seat firmly by hand and make sure it doesn’t pop out and is properly seated. The seats must be seated well, before resuming repairs. You should never reuse a valve seat if at all possible.

The fluid end is the most easily damaged part of the mud pump. The pumping process occurs within the fluid end with valves, pistons, and liners. Because these components are high-wear items, many pumps are designed to allow quick replacement of these parts.

Additionally, the throat (inside diameter) can begin to wash out from extended usage hours or rather quickly when the fluid solids content is excessive. When this happens it can cut all the way through the seat and into the fluid end module/seat deck. This causes excessive expense not only from a parts standpoint but also extended downtime for parts delivery and labor hours to remove and replace the fluid module. With that said, a properly operated and maintained mud recycling system is vital to not only the pump but everything the drilling fluid comes in contact with downstream.

Maintaining /monitoring the mud pumps and mud pits during operations. Notifying the Driller immediately of any unexplained pit level increases/decreases Verify and record drilling fluid properties at ...

Perform daily inspections and maintenance on electrical equipment. Comply with the permit to work and isolation systems. Carry out periodic maintenance according to the guidelines Maintain, troubleshoot ...

Assist internal and external customers with troubleshooting of Rig Equipment (Top Drive, Catwalk, Wrench, Drawworks, VFDs, Generators, Mud Pumps, BOP) Expeditiously work to troubleshoot and resolve downtime ...

Assist higher level technicians, as well as work independently with minimal supervision. Promote a safe and quality environment in which to work Perform preventative maintenance requirements and maintain ...

Our service centers and field technicians are equipped with the right tools and equipment to meet your needs. Experienced and well-trained professionals rebuild your pumps and rotating equipment back to OEM specifications or better.

Talk to your FCX partner about our preventative maintenance services -these service contracts are designed to keep your pumping system running at peak performance.

FCX can engineer, assemble, test and repair sanitary positive displacement and centrifugal pumps. Our capabilities range from providing bare shaft pumps to complete skid mounted pump assemblies with variable frequency drives.

We carry an extensive inventory of positive displacement and centrifugal pumps in the surface finishes required by the life sciences market. Learn more about our Sanitary and High Purity Services

When it comes to service, we can"t be outdone. With a full line of quality pumps and parts in stock, we have the answers you need, when you need them.

Titan Oil Tools offers high quality mud pump expendables and mud pump replacement parts for the wide variety of mud pumps, centrifugal pumps found on the world market today. These quality pump parts offer great performance and our pricing will save you money.

We are your oilfield supplier of choice for mud pump spares and mud pump parts: mud pump piston liners and pistons. All mud pump parts can be sourced for fast delivery; Come to us for mud pump liners, pistons, piston rods and parts, pony rods, threaded rings and caps,and more. Try us for duplex and triples pump spares and duplex and triplex mud pump parts, and also valve parts like valve seats. gland nut, and mud pump gaskets.

Mud pump liners may come in chrome, alumina ceramic and zirconia ceramic. Chrome liners and alumina ceramic liners are less costly, their cost of replacement over one year as the chart below shows, is much more than zirconia ceramic liners.

The table below shows a Mud Pump Liner Cost of Ownership which shows a reasonable cost comparison for a rig in continuous service for 36 months. This of course does not include the high cost of maintenance downtime and the cost of labor.

The prices below are based on cost/cylinder. Savings increase when you add up the number of pump cylinders on your rigs and extend the savings to understand the big difference it can make for your budget.

Mud pump valve seats are used in on-shore and offshore oil and gas drilling operations and in pumps used in land-based fracking operations. Valves used in these types of pumping equipment operate at a very high frequency – up to one hertz (one cycle per second) – and are prone to high wear and degradation from hysteresis. Parker’s premium grade valve seats feature our Resilon® Polyurethane which has a high modulus of elasticity to successfully withstand high frequency operation and resist hysteresis.

Where typical urethane valves may last up to 400 hours, our proven valve seat designs with Resilon Polyurethane have lasted up to 800 hours (400 hours longer) – greatly improving drilling productivity through longer life. Longer valve seat life means maintenance intervals can be extended and production jobs can be completed before service is required.

Finish every job more quickly and eliminate the need to hand pump again. Graco Cordless Drywall Mud Pumps let you fill all of your taping tools with the push of a button. With Standard Series or Pro Series pumps, there is a PowerFill for every business.

If you run a mud rig, you have probably figured out that the mud pump is the heart of the rig. Without it, drilling stops. Keeping your pump in good shape is key to productivity. There are some tricks I have learned over the years to keeping a pump running well.

First, you need a baseline to know how well your pump is doing. When it’s freshly rebuilt, it will be at the top efficiency. An easy way to establish this efficiency is to pump through an orifice at a known rate with a known fluid. When I rig up, I hook my water truck to my pump and pump through my mixing hopper at idle. My hopper has a ½-inch nozzle in it, so at idle I see about 80 psi on the pump when it’s fresh. Since I’m pumping clear water at a known rate, I do this on every job.

As time goes on and I drill more hole, and the pump wears, I start seeing a decrease in my initial pressure — 75, then 70, then 65, etc. This tells me I better order parts. Funny thing is, I don’t usually notice it when drilling. After all, I am running it a lot faster, and it’s hard to tell the difference in a few gallons a minute until it really goes south. This method has saved me quite a bit on parts over the years. When the swabs wear they start to leak. This bypass pushes mud around the swab, against the liners, greatly accelerating wear. By changing the swab at the first sign of bypass, I am able to get at least three sets of swabs before I have to change liners. This saves money.

Before I figured this out, I would sometimes have to run swabs to complete failure. (I was just a hand then, so it wasn’t my rig.) When I tore the pump down to put in swabs, lo-and-behold, the liners were cut so badly that they had to be changed too. That is false economy. Clean mud helps too. A desander will pay for itself in pump parts quicker than you think, and make a better hole to boot. Pump rods and packing last longer if they are washed and lubricated. In the oilfield, we use a petroleum-based lube, but that it not a good idea in the water well business. I generally use water and dish soap. Sometimes it tends to foam too much, so I add a few tablets of an over the counter, anti-gas product, like Di-Gel or Gas-Ex, to cut the foaming.

Maintenance on the gear end of your pump is important, too. Maintenance is WAY cheaper than repair. The first, and most important, thing is clean oil. On a duplex pump, there is a packing gland called an oil-stop on the gear end of the rod. This is often overlooked because the pump pumps just as well with a bad oil-stop. But as soon as the fluid end packing starts leaking, it pumps mud and abrasive sand into the gear end. This is a recipe for disaster. Eventually, all gear ends start knocking. The driller should notice this, and start planning. A lot of times, a driller will change the oil and go to a higher viscosity oil, thinking this will help cushion the knock. Wrong. Most smaller duplex pumps are splash lubricated. Thicker oil does not splash as well, and actually starves the bearings of lubrication and accelerates wear. I use 85W90 in my pumps. A thicker 90W140 weight wears them out a lot quicker. You can improve the “climbing” ability of the oil with an additive, like Lucas, if you want. That seems to help.

Outside the pump, but still an important part of the system, is the pop-off, or pressure relief valve. When you plug the bit, or your brother-in-law closes the discharge valve on a running pump, something has to give. Without a good, tested pop-off, the part that fails will be hard to fix, expensive and probably hurt somebody. Pop-off valve are easily overlooked. If you pump cement through your rig pump, it should be a standard part of the cleanup procedure. Remove the shear pin and wash through the valve. In the old days, these valves were made to use a common nail as the shear pin, but now nails come in so many grades that they are no longer a reliable tool. Rated shear pins are available for this. In no case should you ever run an Allen wrench! They are hardened steel and will hurt somebody or destroy your pump.

One last thing that helps pump maintenance is a good pulsation dampener. It should be close to the pump discharge, properly sized and drained after every job. Bet you never thought of that one. If your pump discharge goes straight to the standpipe, when you finish the job your standpipe is still full of fluid. Eventually the pulsation dampener will water-log and become useless. This is hard on the gear end of the pump. Open a valve that drains it at the end of every job. It’ll make your pump run smoother and longer.