mud pump rod cooling system pricelist

Mud pump, refers to the drilling process to the drilling mud or water and other washing liquid machinery. The main components are volute, impeller, pump seat, pump case, support cylinder, motor seat, motor and other components. Impeller nut is cast iron, so corrosion resistance is good, and convenient processing technology. Pump seat is equipped with four skeleton oil seal and shaft sleeve, prevent shaft wear, prolong the service life of the shaft.

ATO offers high quality vertical mud pumps with thick, solid shaft and copper motor. Various models are available, such as 2 inch mud pump, 3 inch mud pump, 4 inch mud pump and 6 inch mud pump.

Vertical mud pump is used as suction and pouring of river mud, suitable for oil refining, construction, printing and dyeing, chemical industry and other industries.

The concept of the lurry pump and mud pump is very close, many people do not know what the difference is. Although both mud pump and slurry pump are impurity pumps, if you fully understand these two types of pumps, you can clearly distinguish them from the application and the characteristics of the conveying medium. In this article, we will introduce the differences between mud pump and slurry pump from 4 aspects.

Conveying Medium. The slurry pump is mainly used in the mining industry, and its wear resistance is relatively strong. So it can not only transport slag-containing mud, but also mud. Slurry pumps are usually made of cast iron, and the pumps have low wear resistance. Therefore, mud pumps are often used to transport mud containing suspended particles. When the slurry pump is working, the pump parts are susceptible to impact, wear and corrosion. Therefore, the bushing of the slurry pump adopts wear-resistant materials, such as high-chromium alloy, rubber, etc. The use of wear-resistant materials can effectively reduce the wear parts of the pump. Therefore, most of the slurry pumps on the market are wear-resistant slurry pumps.

Working Principle. For the mud pump, the motor drives the piston to move through the connecting rod mechanism, which causes the change of the volume of the sealed cavity of the mud pump. And make the pressure difference inside and outside the pump change. Finally, the process of water absorption and drainage is completed. When the slurry pump is working, the motor drives the impeller to rotate, thereby increasing the kinetic energy of the slurry. At the same time, the slurry flows to the edge of the impeller due to inertia, and is discharged from the drain pipe at a high speed.

Application. The slurry pump is widely used for solid slurry transportation in metallurgy, dredging, mining, electric power, coal and other industries. Mud pumps are mainly used in papermaking, drilling, winemaking, pharmaceutical and other industries to transport suspensions.

Auxiliary Equipment. Auxiliary equipment is required when using a mud pump, but not a slurry pump. The mud pump often needs to be used together with the high pressure water pump. The high-pressure pump sends water at a higher pressure than the mud pump to the leak-proof packing. Then protect the packaging. Otherwise, it is easy to wear the sealing parts. However, the wear-resistant pulp pump can complete the conveying work independently, and does not need to be equipped with other auxiliary equipment.

In short, the mud pump not only has stronger wear resistance, but also has a stronger ability to transport particles. Generally, the capacity of the slurry pump is larger than that of the slurry pump, and it is mainly suitable for the washing of coal and metal ore. The mud pump is more suitable for the occasion of daily life. ATO shop provides different models vertical mud pump, such as 2 inch mud pump, 3 inch mud pump, 4 inch mud pump and so on.

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Mud-Pump Gear Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Weatherford products and services are subject to the Company’s standard terms and conditions, available on request or at weatherford.com. For more information contact an authorized Weatherford representative. Unless noted

otherwise, trademarks and service marks herein are the property of Weatherford. Specifications are subject to change without notice. Weatherford sells its products and services in accordance with the terms and conditions set

The 2,200-hp mud pump for offshore applications is a single-acting reciprocating triplex mud pump designed for high fluid flow rates, even at low operating speeds, and with a long stroke design. These features reduce the number of load reversals in critical components and increase the life of fluid end parts.

The pump’s critical components are strategically placed to make maintenance and inspection far easier and safer. The two-piece, quick-release piston rod lets you remove the piston without disturbing the liner, minimizing downtime when you’re replacing fluid parts.

A Mud pump features robust reciprocating pumping technology for mud circulation on the drilling array. Reciprocating pumps follow the conventional mechanism of the auto engine.

Having a crosshead crankshaft gear makes the mud pump mechanism more effective. And the specific placement of the connecting rod helps the piston to play its role.

The fixed part of the piston rod, along with a sleeve, ensures compelling performances. In this position, it can work without any force on pistons from sideways.

And in this position, a cooling spray of water on the pump’s pistons helps it work better. As well as other moving portions like liners also work better with cooling water spray.

The mud pump works as a virtual device featured in the well drilling kit. Unlike a stand-alone device, this kind of pump works as major equipment of robust drilling equipment.

Both output and input fluid flows through the direct pipeline towards the drilling string. The advanced connectivity with structured fixtures of the borehole helps a mud pump to perform the best.

In the case of remote locations, the mechanism of diesel motors suits this kind of pumping unit. On the availability of DC motor kits, a mud pump features electric energy driven AC motors.

The surface of this kind of deep well can be spacious up to 10 miles. So, in these cases, a mud pump must work on the 10 miles below the water surface.

The types of a mud pump depend on its specific combo of components. According to the requirements of the clients, this pump features the best equipment.

The number of working ends of a pump’s piston defines the pattern of action. Having a single working end of the piston, a Single-acting mud pump can use only one direction.

For a wide range of drilling applications, this kind of pumping unit works the best. In these applications, a pump needs to generate a high amount of pressure.

The Duplex mud pump’s competent mechanism helps to ensure the standard mud circulation as it can reach from the mud picking system to the bottom point of the well.

All these components provide the best performance executing the top-tier mechanism. In case of severe vibration, this pumping unit requires a suction unit.

Maintenance is a vital thing to boost the lifespan of a pump. If you go through the following essential key points, you will learn how to enhance a mud pump’s performance.

Regular servicing is a standard part of maintenance for any mechanical unit. But, most of the maintenance shop complains about the abuse of pumping components without any oil treatment.

Checking and changing the oil daily makes your mud pump more efficient. If you detect any mud or water contamination in existing oil, don’t hesitate to change it.

So, users should take care of the gear end from mud deposits. Otherwise, it will ruin pony rod packing. It’s one kind of mechanical failure, which can shred pistons and liners.

This kind of potent system contains a tank along with a spray bar and a small pumping unit. Using the spray bar, the tank moves out the fluid from the tank.

Always remember where a mud pump deals with drilling fluid, it should be free of solids. The drilling fluid can be raw water or other combination of liquid. But it needs to be solids-free.

For the recycling process of your fluid, always prefer a standard mud recycling system. As well as checking the reliable content throughout the day enhance the performance of your system.

A triplex mud pump works with minimal suction pressure. One thing you need to remember is the maintenance of this suction pressure with consistency during application.

The construction of all the parts that make up the Rod System begins with the acquisition of raw materials, from which are then derived all finished components by means of tooling machines. These components are then assembled at our assembly department to get the Rod System finished.