mud pump valve seat puller head free sample

CATALOG INTRODUCTIONBaker SPD was founded in 1981 and is located in San Antonio, Texas. Baker SPD is a leading manufacturer ofDrill Pipe Float Valves, Mud Gate Valves, Fluid End Pump Parts, Thread Compounds, Hand Pumps, Pipe Vises,and Accessories. Our company’s quality statement is “We are a leading World Class Quality Provider of Pro-duction/Drilling Products and Value Added Services for the Energy Industry”.Baker SPD is committed to meeting and exceeding our customer"s expectations. To achieve this objective, weconform with ISO 9001 for operational procedures and we have adopted “continuous improvement” as a guidingprinciple throughout the company. Baker SPD has the depth of experience in sales, operations, engineering,and manufacturing to be trusted to meet today"s customer demands.

BAKER SPD HAS IT ALLYour “One Stop Mud Pump Valve and Seat Supplier”Providing a full range of Fluid End Expendable Pump Parts for every drilling condition, with “Maximum Life”and “Quality”. Baker SPD is now offering the “Mud Max®” Full Open Valve and Seat, along with the “MudKing®” 4 Web Valve and Seat to compliment our current product line.Focusing on the products and its needs, Baker SPD continually strives for perfection, to be a world classmanufacturer/service company in the eyes of our customers for the Energy Industry.A true value for the customers in more ways than one.

Mud Max® Full Open Mud King® 4 Web 100% Interchangeable with Harrisburg Roughneck® 100% Interchangeable with Mission®

FLUID END EXPENDABLE PUMP PARTSLook anywhere in the oil and gas industry and you’ll find Baker SPD Fluid End Expendable parts and they are100% guaranteed.

BAKER SPD NOW GIVES MORE DEPTH AND STRENGTHSince 1923, the finest oil industry fluid end expendable pump parts have always been “American.” Americanbecame Reed American in 1977; the tradition continued. Now the name is Baker SPD, and the quality of theline runs even deeper than ever. Here’s why: • Baker SPD has set worldwide product and service standards - higher than ever. • Baker SPD is upgrading the line’s product research, engineering, quality control, and testing. • Baker SPD warranties their quality products from manufacturing defects.

EXPENDABLE PARTStesting and product improvement programs. It’s not unusual for us to spend as much as three years performinghundreds of grueling tests before a new or improved Baker SPD product appears on the market.Our customers are, in a sense, the final “inspectors” of our products; however, all Baker SPD pump parts arerigorously inspected - and many also individually tested - before they’re released from the factory. Because theonly thing we want coming back is you.

THE STRENGTH AND KNOWLEDGE TO LEAD AN INDUSTRYFor 70 years, the organization that’s now Baker SPD has been demonstrating its ability to look ahead, commitresources, and deliver products in the oilfield. Now, as a division of Baker Oil Tools, Baker SPD is widelyregarded as one of the most innovative and responsive service companies around.Baker SPD Fluid End Expendables have become industry standards due to their superior engineering, qualitycontrol, and testing. They are known for dependability in the field and long service between change-outs.Baker SPD has the desire, strength, and knowledge to lead the industry through all its changes in the comingyears. The best is yet to come!

DOUBLE ANGLE O-RING VALVE The Double Angle O-ring Valve is made with a tough one-piece body to run more hours between change outs. It"s made with carburized premium alloy steel to resist wear, provide a positive seal, and help protect against wash out or damage to the pump. FEATURES Double Angle O-ring Seat, Spring, and Valve •Specified for all drilling operations up to and exceeding 5,000 psi• Maximum operating temperature is 170°F• Patented polyurethane insert is noted for its “Double Angle” 55° seal contact surface, which maintains cylinder priming during pump shutdown• Sizes fit most mud pumps• Shelf life of polyurethane insert is maximum of 5 years• Body is a one-piece design, configured to give maximum containment of the insert with minimum use of material

DOUBLE ANGLE O-RING “BLUE STREAK™” HIGH TEMPERATURE VALVE The High Temperature Double Angle O-ring Valve body is a one-piece design, configured to give maximum containment of the insert with minimum use of material. The valve and insert configuration has been operated at pressures up to and exceeding 5,000 psi. FEATURES •Maximum operating temperature is 200°F Double Angle O-ring Seat, Spring, and High Temperature Valve •Shelf life of polyurethane insert is maximum of 5 years

STANDARD PLATE TYPE VALVEThe Standard Plate Type Valve is extremely durable to its premium forged alloy steel body and its unique design.It has been proven by more than 50 years of oilfield service. To prevent dry pistons and liners at startup, thevalve features a patented double angle polyurethane insert that maintains cylinder priming during pump shut-down. The precise control of insert pre-load is accomplished with a flat ground insert retaining plate and splitretainers. The insert can be replaced in the field with minimum down time. This valve is designed to fit pumps inthe oilfield and is used with Baker SPD seats. FEATURES •Specified for all drilling operation up to and exceeding 3,500 psi •Maximum temperature rating for the standard polyurethane insert is 170°F •Maximum temperature rating for the Buna-N rubber insert is 225°F •Available with Buna-N rubber or polyurethane inserts •Shelf life of polyurethane insert is maximum of 5 years Standard Plate Type Seat, Spring, and Valve •Shelf life of Buna-N rubber is maximum of 10 years •Valves with rubber lipless inserts are rated for pressure up to 2,500 psi

3-WEB PLATE TYPE/DOUBLE ANGLEVALVE SEATLong service life and high flow areas have made this seat themost popular in the oilfield for over 50 years. Made ofcarburized premium alloy steel, the seat resists wear even inthe roughest conditions. The original 3-web design allowsmaximum flow area through the seat while providing maximumseating area for the valve. Precision ground tapers allow thisseat to fit the deck of most pumps. 3-Web Plate Type/Double Angle Valve SeatFEATURES• Seat sealing angle with the valve is 55°• Full length lower stem guide is fully hardened• Used with both Double Angle O-ring and Plate Type ValvesNote: Baker SPD 3-web seats are not interchangeable with any other manufactures.

MUD PUMP FLUID END EXPENDABLE PARTSThe Mud King® Valves and Seats are 100% interchangeablewith Mission®. The body is designed with a pre-loaded insertutilizing a machined “knock-on” nut retainer plate. This designallows for field replacement of insert with a minimum of downtime. Valves are available with polyurethane or rubber insertsto match operating pressure, temperature, and mud type.FEATURES Mud King® Seat, Spring, and Valve• Rated for all drilling operations up to and exceeding 5,000 psi• Maximum temperature rating for the standard polyurethane insert is 170°F• Maximum temperature rating for the Buna-N rubber insert is 225°F• Valves with rubber lipless inserts are rated for pressures up to 2,500 psi• Shelf life of polyurethane insert is maximum of 5 years• Shelf life of Buna-N rubber is maximum of 10 years

MUD KING® “BLUE STREAK™” HIGH TEMPERATURE VALVEFEATURES• Maximum operating temperature is 200°F• Shelf life of polyurethane insert is maximum of 5 years• Higher temperature resistant

4-WEB MUD KING® SEATSAre designed to work with the Mud King® Valves only.FEATURES Mud King “Blue Streak™” 4-Web Seat, Spring, and High Temperature Valve• Seat sealing angle with the valve is 55°• Full length lower stem guide fully hardened

WM FULL OPEN VALVE AND SEAT Baker SPD offers the full open valve and seat design as an alternative to the web style. This style eliminates the need of removing the discharge seat when replacing the suction seat in the over and under valve pot arrangement given to certain triplex pumps. The wing guided valve and seat are carburized for extended service life. Design features provide superior flow character- WM Full Open Seat, Spring, and Valve istics and maximum flow area. Abrasion resistant polyure- thane inserts are easily replaced in the field.FEATURES• Specified for all drilling operations up to and exceeding 5,000 psi• Body is a two-piece inertia welded design, configured to give maximum containment of insert with minimum use of material• Insert is a lipless 45° seal contact surface with a broad contact area to resist abrasion• Maximum operating temperature is 170°F• Patented polyurethane insert is noted for its “Double Angle” 45° seal contact surface, which maintains cylin- der priming during pump shutdown• Shelf life of polyurethane insert is 5 years• A 45° angle on the seat allows the valve to fully interchange with the National design valves and seats

WM FULL OPEN “BLUE STREAK™” HIGH TEMPERATURE VALVE FEATURES •Maximum operating temperature is 200°F •Shelf life of polyurethane insert is 5 years •Higher temperature resistant •Specified for all drilling operations up to and exceeding 5,000 psi

MUD MAX® FULL OPEN VALVEThe Mud Max® Valves and Seats are 100% interchangeable with the Harrisburg Roughneck® style.FEATURES• Specified for all drilling operations up to and exceeding 4,000 psi• Body is a two-piece inertia welded design, configured to give maximum containment of insert with minimum use of material• Insert is a lipless 45° seal contact surface with a broad contact area to resist abrasion• Maximum temperature rating for the standard polyurethane insert is 170°F Mud Max® Full Open Valve Seat, Spring, and Valve• Maximum temperature rating for the Buna-N rubber insert is 225°F• Shelf life of polyurethane insert is maximum of 5 years• Shelf life of Buna-N rubber is maximum of 10 years

MUD PUMP FLUID END EXPENDABLE PARTSMUD MAX® FULL OPEN “BLUE STREAK™” HIGH TEMPERATURE VALVEFEATURES• Specified for all drilling operations up to and exceeding 4,000 psi• Higher temperature resistant• Maximum operating temperature is 200°F• Shelf life of polyurethane insert is 5 years

MUD MAX® FULL OPEN SEATS Mud Max® Full Open Seat, Spring, andThe Mud Max® Valves and Seats are 100% interchange- “Blue Streak™” High Temperature Valveable with the Harrisburg Roughneck® style. These seatsare made of premium alloy steel and carburized for sur-face hardness to resist wear and extend service life. Seatsealing angle with the valve is 45°.

BAKER DOUBLE-ANGLE O-RING VALVES AND SEATS API-6 API-6 Description API-5 API-7 API-8 Series 02 Series 03Valve, with Urethane Insert 050011700 050011800 050011900 050011000 050012000Valve, with “Blue Streak™” High Temperature Urethane Insert 052148700 052058600 052050200 O/AInsert, Urethane 051584400 051584400 051584500 051427500 051583100Insert, Urethane High Temperature O/A 052058500 052050100 O/ASeat 050862300 050481800 052000800 050930900 050484400O/A = On Application.Note: For all other pumps, contact your Baker SPD representative.

BAKER STANDARD PLATE TYPE VALVES AND SEATS API-6 API-6 Description API -4 API-5 API-7 API-8 API-9 Series 02 Series 03Valve, with Urethane Insert 050828700 050499100 050501200 050503800 050506200 050510900 050511800Valve, with Lipless Buna-N Rubber Insert 050828200 050498800 050500900 050503400 050505900 050510500 050511300Insert, Urethane 050488600 050488800 050488800 050489000 050489300 050489700 050490100Insert, Buna-N Rubber 050485900 050486000 050486000 050486200 050486400 050486800 050487000Half Retainer (2 pieces required) 050492100 050492000 050492000 050492000 050492000 050492000 050492000Retainer Ring 050493000 050493100 050493100 050493100 050493100 050493100 050493100Valve Plate 050490600 050490700 050490700 050490800 050491000 050491300 050491500Seat 050828100 050862300 050481800 052000800 050930900 050484400 050485100Note: For all other pumps, contact your Baker SPD representative.

MUD KING® VALVES AND SEATS 100% Interchangeable with Mission Description API-5 API-6 API-7 API-8Valve, with Urethane Insert 052101100 052100600 052100000 052107600Valve, with Buna-N Rubber Insert 052101133 052100633 052100033 052107633Valve, with “Blue Streak™” High Temperature Urethane Insert 052101122 052100622 052100022 052107622Insert, Buna-N Rubber 052141200 052107100 052106300 052141300Insert, Urethane 052101200 052100700 052100100 052107500Insert, Urethane High Temperature 052101201 052100701 052100101 052107501Seat 052101500 052100900 052100400 052107200Note: For all other pumps, contact your Baker SPD representative.

BAKER WM SERIES FULL OPEN VALVES AND SEATS Description API-6 API-7 API-8Valve, with Urethane Insert 052045100 052042100 N/AValve, with “Blue Streak™” High Temperature Urethane Insert 052090800 052098000 N/AInsert, Urethane 052043600 052036800 N/AInsert, Urethane High Temperature 052088700 052088600 N/ASeat 052044500 052040900 N/AN/A = Not Available.Note: For all other pumps, contact your Baker SPD representative.

MUD MAX® FULL OPEN VALVES AND SEATS 100% Interchangeable with the Harrisburg Roughneck Description API-5 API-6 API-7 API-8Valve, with Urethane Insert 052082800 052081600 052081300 N/AValve, with “Blue Streak™” High Temperature Urethane Insert 052082822 052081622 052081322 N/AValve, Full Open with Buna-N Rubber Insert 052082833 052081633 052087900 N/AInsert, Urethane 052084200 052081500 052080600 N/AInsert, Urethane High Temperature 052084201 052081501 052080601 N/AInsert, Buna-N Rubber 052141100 052090600 052087800 N/ASeat 052082100 052081700 052080500 N/AN/A = Not Available.Note: For all other pumps, contact your Baker SPD representative.

66NON-API MODIFIED SEATS FOR EMSCO/NATIONAL PUMPS Baker SPD

BAKER STANDARD PLATE TYPE VALVES AND SEATS Non API-6 Non API-6 Description Non API -4 Non API-5 Series 02 Series 03 Non API-7 Non API-8 Non API-9 Pumps PumpsValve, with Urethane Insert 050828700 050499100 050501200 050503800 050506200 050510900 050511800Valve, with Lipless Buna-N Rubber Insert 050828200 050498800 050500900 050503400 050505900 050510500 050511300Insert, Urethane 050488600 050488800 050488800 050489000 050489300 050489700 050490100Insert, Buna-N Rubber 050485900 050486000 050486000 050486200 050486400 050486800 050487000Seat (National 7P50) - 051574500 - - - - -Seat (National 8P80, 9P100, 10P130) - - - 051243600 - - -Seat (National 12P160) - - - - 051429900 - -Seat (National 14P220) - - - - - 050484500 -Seat (Continental Emsco Pumps) - 050481600 050481800 050482300 050482700 050484300 -Half Retainer (2 pieces required) 050492100 050492000 050492000 050492000 050492000 050492000 050495000Retainer Ring 050493000 050493100 050493100 050493100 050493100 050493100 050493100Valve Plate 050490600 050490700 050490700 050490800 050491000 050491300 050491500Note: For all other National Pumps contact your Baker SPD representative.

BAKER DOUBLE-ANGLE O-RING VALVE AND SEATS Non API-6 Description Non API-5 Non API-6 Non API-7 Non API-8 Series 03Valve, with Urethane Insert 050011700 050011800 050011900 050011000 050012000Valve, with “Blue Streak™” High Temperature Urethane Insert O/A 052058600 052050200 O/AInsert, Urethane 051584400 051584400 051584500 051427500 051583100Insert, Urethane High Temperature O/A 052058500 052050100 O/A

MUD PUMP FLUID END EXPENDABLE PARTSSeat (National 7P50) 051574500 - - - -Seat (National 8P80, 9P100, 10P130) - - - - -Seat (National 12P160) - - 051243600 051429900 -Seat (National 14P200/14P220) - - - - 050484500Seat (Continental Emsco Pumps) 050481600 050481800 050482300 050482700 050484300O/A = On Application. ; Note: For all other National Pumps contact your Baker SPD representative.

MUD KING® VALVES AND SEATS 100% Interchangeable with Mission Description Non API-5 Non API-6 Non API-7 Non API-8Valve, with Urethane Insert 052101100 052100600 052100000 052125800Valve, with Buna-N Rubber Insert 052101133 052100633 052100033 052125833Valve, with “Blue Streak™” High Temperature Urethane Insert 052101122 052100622 052100022 052125822Insert, Buna-N Rubber 052141200 052107100 052106300 052141300Insert, Urethane 052101200 052100700 052100100 052107500Insert, Urethane High Temperature 052101201 052100701 052100101 052107501Seat (National 7P50) N/A - - -Seat (National 8P80, 9P100, 10P130) - 052101000 - -Seat (National 12P160) - - 052100500 -Seat (National 14P200/14P220) - - - 052110900N/A = Not Available.; Note: For all other National Pumps contact your Baker SPD representative.

BAKER WM SERIES FULL OPEN VALVES AND SEATS Description Non API 5.5 Non API-6 Non API-7Valve, with Urethane Insert 052062700 052045100 052042100Valve, with “Blue Streak™” High Temperature Urethane Insert N/A 052090800 052098000Insert, Urethane 052059200 052043600 052036800Insert, Urethane High Temperature N/A 052088700 052088600Seat (National 7P50) 052059000 - -Seat (National 8P80, 9P100, 10P130) - 052044400 -Seat (National 12P160) - - 052041000Seat (National 14P200/14P220) - N/A N/AN/A = Not Available.; Note: For all other National Pumps contact your Baker SPD representative.

MUD MAX® FULL OPEN VALVES AND SEATS 100% Interchangeable with the Harrisburg Roughneck Description Non API-5 Non API-6 Non API-7Valve, with Urethane Insert 052082800 052081600 052081300Valve, with “Blue Streak™” High Temperature Urethane Insert 052082822 052081622 052081322Valve, with Buna-N Rubber Insert 052082833 052081633 052087900Insert, Urethane 052084200 052081500 052080600Insert, Urethane High Temperature 052084201 052081501 052080601Insert, Buna-N Rubber 052141100 052090600 052087800Seat (National 7P50) 052093200 - -Seat (National 8P80, 9P100, 10P130) - 052083700 -Seat (National 12P160) - - 052083500Seat (14P200/14P220) - - -

DUPLEX AND TRIPLEX REPLACEABLE RUBBER PISTONSBaker SPD A-Line Pistons are made with nitrile rubber and the piston"s maximum pressure capability is due tothis oil, water and heat resistant material. These pistons are fully interchangeable with most othermanufacturers.Baker SPD pistons are highly resistant to extrusion wear under the highest pump pressures. The A-Line pistonoffers maximum resistance to bending and hoop stresses generated by cylinder loads and rod fits; a benefit oftheir premium forged alloy steel bodies. Rated for all drilling operations up to 2,500 psi.

MUD PUMP FLUID END EXPENDABLE PARTS Duplex Bonded Rubber Piston Triplex Bonded Rubber Piston

“DOUBLE DURO” BONDED TRIPLEX URETHANE PISTONThe “Double Duro” Bonded Triplex Urethane Piston isdesigned for resistance to extrusion and abrasion, andwith water cooling it will provide optimum performance inoil base mud and high drilling pressures.FEATURES• Rated for all drilling operations up to and exceeding 5,000 psi• Maximum operating temperature is 170°F• Extended service life• High pressure service “Double Duro” Bonded Triplex Urethane Piston

SINGLE DUROMETER BONDED URETHANE TRIPLEX PISTONThe Single Durometer Bonded Urethane Triplex Pistonwas designed for resistance to extrusion and abrasionand with water cooling, it will provide optimum perfor-mance in oil base mud and high drilling pressures.These pistons are highly resistant to extrusion wear un-der the highest pump pressures.FEATURES• Rated for all drilling operations up to and exceeding 5,000 psi• Maximum operating temperature is 170°F• Extended service life Single Durometer Bonded Urethane Triplex Piston• High pressure service

A-LINE DUPLEX PISTON RODResisting abrasives, corrosion, fatigue, and high loads better than any piston rod in the oilfield, this rod isactually a heat treated alloy steel bar fuse coated with a layer of nickel chrome boron. This is a technique firstintroduced to the industry by Reed American. Featuring a precision ground OD, and numerically controlledmachining of the ends to tighter than authorized API specifications, this rod fits all pumps in the field. The rod"sexcellent fatigue resistance is accentuated by a fully interchangeable, but exclusive, modified thread rootdesign.

A-LINE DUPLEX ROD PACKINGWithstanding the highest pump pressures, this packing performs best under all drilling conditions. The packing"ssemi-adjustable design prevents it from collapsing and allows it to resist high pressure extrusion. This packing

MUD PUMP FLUID END EXPENDABLE PARTSresists the elements due to its woven duck fabric and nitrile construction. The packing comes with individual splitrings that are easy to install and to remove. Packing is recommended for service on pumps handling oilwelldrilling muds, fresh water, salt water, and general petroleum products.Note: Rod clamps are available upon request. Contact your Baker SPD representative for additional informa-tion.

A-LINE LINERS FOR TRIPLEX AND DUPLEX PUMPS The A-Line designation of these liners indicate unmatched perfor- mance and durability in most severe drilling conditions. Constructed to a computer designed shrink fit of a high chrome/iron or bimetal sleeve into a forged steel hull, the liners offer extreme abra- sion, resistance, hardness, and corrosion resistance. These liners can withstand the highest hoop stresses since their hulls are made of high- grade carbon steel forging. All Baker SPD standard liners are manu- A-Line Liners for Triplex and Duplex Pumps factured with the “HP” lip design to prevent inner sleeve slippage. Sleeves are 26% chrome steel heat treated to RC62 to 66 hardness. The micro-finish honed ID helps assure piston durability, yet it is not so smooth as to produce hydroplaning. The OD is numerically con- trolled, machined precisely to ensure continually correct registers and sealing surfaces to the pump bore and face. Liner bore tolerances, tighter than the API specifications, give approx- imately 5% to 10% bonus hours of service life to the piston and liner, over and above the extended service life. Combined with a competi- tive initial cost factor, this extended liner life makes Baker SPD triplex and duplex A-Line liners the most cost and performance efficient in the current industry.

A-LINE PACKING Recommended for high pressure applications. A-Line liner packing prevents excessive packing extrusion. This packing has an extrusion resistant design featuring hard corners which are an integral part of seal rings. The soft nitrile element rubber center establishes fluid seal, while the hard corners prevent rubber extrusions into the pump bore and over liner flange shoulders. Except where noted, lantern rings in- terchange with those furnished by pump manufacturer or lantern rings A-Line Packing used in A-Line liner packing.

VALVE CAP, CYLINDER HEAD, AND PLUG SEAL GASKETSMolded of oil resistant duck and synthetic composition, these fluid end gaskets are designed to handle all drillingconditions, and afford positive sealing in all areas of both triplex and duplex mud pumps.Depending on the design, these gaskets are used as liner packing in many triplex and duplex mud pumps, thusaffording an additional cost savings to the drilling company.

MECHANICAL VALVE SEAT PULLERThe Baker SPD mechanical seat puller utilizes a screw and wedge principle to 1produce 200,000 lb of force to pull valve seats safely and easily. The components 2are made from high quality cast steel for impact and wear resistance.

MECHANICAL VALVE SEAT PULLER PARTS LIST 3 Item Valve No. Material Description No. Series Req’d. No. - Assembly Complete, Less Head All - 051510200 1 Wing Nut - 1 050551300 2 Plain Washer - 1 050547600 3 Stem - 1 052106100 4 4 Wedge - 1 050547500 5 Grooved Washer - 1 050547700 6 Crowfoot (or Support) - 1 050547800 ;Valve Seat Puller Heads - See chart below for listings. 5

MUD PUMP FLUID END EXPENDABLE PARTSWEB TYPE AND FULL OPEN VALVE SEAT PULLER HEADS

HYDRAULIC AND MECHANICAL VALVE SEAT PULLER HEAD 6 Mud King® Mechanical Valve Seat Puller Valve 3-Web WM Full Mud Max® Description API 4-Web Series Threaded Open Full Open Threaded - 00 051493022 N/A N/A N/A 4 01 051493122 N/A N/A N/A 5 or 6 02 051493222 052102100 052061800 052084100 6 03 051493322 052102200 052119900 052084000 Puller Head X 03 051493322 052102200 052119900 052084000 7 04 051449922 052102300 052120000 052083900 ;

8 06 051493422 052139100 O/A N/A 9 07 & 08 051493522 N/A N/A N/A X API Modified Pumps. N/A = Non-Applicable. O/A = On Application. Web Type Valve Seat Puller Heads

HYDRAULIC VALVE SEAT PULLER 14 The Baker SPD Hydraulic Valve Seat Puller was developed for two 12 reasons: to eliminate damage to fluid ends caused by removing valve 3 10 5 seats with a cutting torch, and to reduce the possibility of personal injury. 9 The puller unit can exert a force of over 200,000 pounds on the valve11 seat. The unit comes complete with a 25-ft hose so that the hand operated hydraulic pump can be placed at a safe distance from the mud 6 7 15 pump during pulling operations. The hose, puller unit, and pump are 8 equipped with quick disconnect couplings for easy handling. The pump comes complete with a pressure gauge. The numerically controlled machined and heat treated puller heads of high alloy steel offer maxi- mum strength without the stress concentration characteristic of torch 13 burned heads. 2

1 4 12 7 Hydraulic Pump

HYDRAULIC VALVE SEAT PULLER Item Valve No. Description Material No. No. Series Req’d. - Assembly Complete, Less Head and Adapter All - 051596902 - Assembly Complete, Less Head, Adapter, and Pump All - 051432200 - Pump Assembly All 1 051596800 1 Pump - 1 051596600 - Pump Repair Kit for Pump Y-22 - - 051596700 - Pump Repair Kit for Pump Y-43 or P-158 - - 051749700 2 Gauge - 1 050551900 3 Hose Coupling, Male - - 050769100 4 Nipple - 1 051561400 - Puller Jack Assembly O All 1 051432601 5 Body - 1 052085300 6 Base - 1 050551400 7 Seal Ring, Small - 1 050551600 8 Seal Ring, Large - 1 050551700 9 Bolt - 3 WWGH1D38SX 10 Elbow, Male - 1 050752200 3 Hose Coupling, Male - 1 050769100 - Hose Assembly All 1 051432700 11 Hose, 25 ft - 1 050750800 12 Hose Coupling, Female - 2 050769000 13 Stem Q - 1 052106100 14 Wing Nut All 1 050551300 15 Tripod Base Adapter (for Studded Pot Covers) - 1 051433300 ; Flat Base Adapter (for Pot Covers Opening Larger than 10 in. Dia) - 1 051242800 ;Not shown. O Puller Jack Spare Parts Assembly 0515565. Q Puller Adapter, competitor stem (2 in. - 4-1/2 in. thread) to Baker puller head with tapered thread, Material No. 0505479. Q Puller Adapter, Baker stem with tapered thread to competitor head (2 in. - 4-1/2 in. thread), Material No. 0517211. V Head, see Page 75 for listings. X For Pullers produced before January 2000 use bolt 050551500.76SERVICE TOOLS Baker SPD

FULL OPEN HYDRAULIC SEAT PULLER (SWIVEL TYPE) Item Description Material No. No. 1 Stem 052106100 5 Jack 051432601 6 Hose Assembly 051432700 7 Pump Assembly 051596800 8 Wing Nut 050551300 9 Hex Nut 051785100 - Puller Assembly 051596902; Note: Item No. 2 Puller Head not shown. Refer to page 75 for Puller Head information. ;Consists of items 1 through 8 (Puller Head and Hex Nut sold separately). O Tripod Base Adapter for studded pot covers.

MUD PUMP FLUID END EXPENDABLE PARTS 8

VALVE INSERT INSTALLATION TOOL (PLATE TYPE/DOUBLE ANGLE) Although originally developed to change inserts on Baker SPD valves, this 4 installation tool has been modified to work on other valve inserts, too. The body is of sturdy construction from a one piece steel casting. The adjusting screw provides compression of the insert needed for easy slip fit of the retainer under 1 the shoulder and on the top stem of the valve.

VALVE INSERT INSTALLATION TOOL 2 Item Valve No. Material Description API No. Series Req’d No. - Assembly Complete, Less Plates - 050844300 1 Body 1 050844400 Valve Insert Installation Tool 2 Screw 00-07 All 1 050844500 3 Pressure Shoe 1 050019200 4 Retainer Pin 1 050619800

VALVE INSERT INSTALLATION PLATES Item Valve No. Description API Top Bottom No. Series Req’d; 01 4 - N/A N/A 02 5, 6 2 050019500 050019400 5 03 - 2 050020800 050020700 5 Plates, D/A O-ring Valve Only 04 7 2 050019700 050019600 06 8 2 050020200 050020100 07 9 - N/A N/A 5 ;One top and one bottom plate required.

VALVE INSERT INSTALLATION FIXTURE (WM FULL OPEN STYLE) Item No. Material Description API No. Req’d No. 5.5 1 052060500 1 Installation Fixture 06 1 052044900 Valve Insert Installation Plate 07 1 052040100 Use heavy duty vise-10 in. minimum opening.

VALVE INSERT INSTALLATION FIXTURE FOR MUD MAX® FULL OPEN No. Material Description API Req"d No. 1 Insert 5 1 O/A Installation 6 1 052085400 Fixture 7 1 052085500 O/A = On Application.

INSTRUCTIONS FOR THE FIELD REPLACEMENT OFBAKER DOUBLE ANGLE O-RING VALVE INSERTPREPARATION OF VALVE1. Secure valve flange in a bench vise as shown, and cut off insert with any sharp tool or 500° maximum heat source.2. Clean valve cone and insert groove with any hydrocarbon based solvent. File Step No. 1 and 2 smooth any rough or chipped surfaces on the valve cone. Reduce all sharp edg- es to a 1/64 in. minimum radius. THIS IS IMPORTANT! Wipe clean and dry.3. With valve upside down and the cone plate positioned as shown, dimension “X” X must be greater than zero (0) to qualify for subsequent installation of a new insert.PREPARATION OF FIXTURE4. Secure Installation Tool #508443 with a socket type shoe in a vise with the bolt on top, as shown.5. Apply a light coat of clean medium weight bearing grease to all surfaces indicated by dotted lines. (Cone and groove of body. Top, inside, and bottom of insert. Step No. 3 Cone of top plate, face of bottom plate.)

EXPENDABLE PARTS down, as shown, and that the insert is seated on the centering ridge of the instal- lation plate. The insert must be concentric with the installation plate. THIS IS IM- PORTANT!INSERT INSTALLATION7. Tighten the bolt two full turns. Recheck insert/plate concentricity. If no eccentric- ity exists, continue to tighten the bolt to insert installation.8. If eccentricity exists after two turns (#7 above), back off the bolt and reestablish insert/plate concentricity before proceeding.Note: Past experience has shown that turning the bolt by hand has not been veryefficient in assembling inserts. What has proven to be very efficient is the use of anair wrench. If at all possible, this is the assembly procedure that is recommended tobe used when installing inserts.INSERT SEATING9. USE A PLASTIC OR WOODEN MALLET. DO NOT USE A METALLIC HAMMER. Mallet the minor cone of the insert at one point until insert/groove alignment is ob- tained, then seat the insert evenly into the groove all around. DO NOT USE A STEEL HAMMER. Step No. 4, 5, 6, and 7STORAGE10. To protect the plates from loss and damage while in storage, place a used valve into the nested cone and installation plates. Place this assembly into the installa- tion tool and tighten the socket shoe onto the valve top stem to form a unitized assembly. Use a plastic or wooden mallet. DO NOT USE A METALLIC HAMMER.

INSTRUCTIONS FOR THE FIELD REPLACEMENT OF BAKER FULL OPEN VALVE INSERT PREPARATION OF VALVE 1. Secure valve stem in a bench vise as shown, and cut off insert with any sharp tool or 500° maximum heat source. 2. Clean valve cone and insert groove with any hydrocarbon based solvent. File smooth any rough or chipped surfaces on the valve cone. Reduce all sharp edges to a 1/64 in. minimum radius. THIS IS IMPORTANT! Wipe clean and dry. PREPARATION OF FIXTURE 3. Apply a light coat of clean medium weight bearing grease to all surfaces indicated Step No. 1 and 2 by dotted lines. (Cone and groove on body. Top, inside, and bottom of insert. Face of installation plate.) 4. Assemble in a bench vise as shown, being certain that the minor cone of the in- sert is seated as shown, on the centering ridge of the installation plate. The insert must be concentric with the installation plate. THIS IS IMPORTANT! NOTE: Use vise with jaw opening of no less than 10 in. Vise handle must be no less than 1 in. in diameter.

INSERT INSTALLATION 5. Tighten the vise two [2] full turns. Recheck insert/plate concentricity. If no eccen- tricity exists, continue to tighten the vise to insert installation. 6. If eccentricity exists after two [2] turns (#5 above), back off the vise and reestab- lish insert/plate concentricity before proceeding. As vise is tightened more, load will increase until tightening by hand will no longer be possible. At this point, use a 5 ft “cheater” pipe on the vise handle will move the insert to installation. NOTE: The installation plate will go metal to metal against the cone of the body. If the insert has not rolled over into the groove in the body, place a mallet against the edge of the insert and with another mallet, hit the first mallet until it drives the insert over the edge of the body and into the groove. The insert will appear completely distorted. Remove this assembly from the vise. Remove the installation plate from the body. Step No. 3, 4, 5, and 6 INSERT SEATING 7. USE A PLASTIC OR WOODEN MALLET. DO NOT USE A METALLIC HAM- MER. Mallet the minor cone of the insert at one point until insert/groove alignment is obtained, then seat the insert evenly into the groove all around. DO NOT USE A STEEL HAMMER. Insert should extend over edge of body cone at least 1/32 in. If any area of insert is larger, continue to use mallet until insert is even all around.

80MUD PUMPS Baker SPD

MUD PUMP CHARTS Manufacturer API-4 API-5 API-6 API-7 API-8 API-9 B-1000-T (7 x 10) B-1300-T (7 x 12) B-500 (7-1/2 x 14) B-750-C (7-3/4 x 16) B-1600-T (7 x 12) B-750-F (7 x 16) Brewster B-1000-F (7 x 18) B-550-F (7 x 14) F-350-P (4-1/2 x 7) F-350 (6 x 7) D-125 (7-1/4 x 10) BA-14; (7-1/2 x 14) D-550 (7-1/2 x 16) D-700 (8 x 16) F-500 (6 x 7-1/2) D-225 (7-1/4 x 12) CA-16; (7-1/2 x 16) D-850 (8-1/4 x 18) D-1000 (8-1/4 x 18) F-650 (6 x 8) F-800 (6-1/4 x 9) D-14; (7-1/2 x 14) DA-500 (7-1/2 x 16) D-1250 (7-1/2 x 18) F-750 (6-3/4 x 8) F-1000 (6-1/4 x 10) D-16; (7-1/2 x 16) DB-550 (7-1/2 x 16) D-1350 (7-1/2 x 18) FA-750 (6-3/4 x 8) D-300; (7-1/2 x 14) DB-700 (7-1/2 x 16) D-1500 (7-1/2 x 18) D-375; (7-1/2 x 14) DC-850 (7-1/2 x 18) D-1650 (7-1/2 x 18) D-500; (7-1/2 x 16) DC-1000 (7-1/2 x 18) D-1000-A (8-1/4 x 18) Continental F-1300 (7 x 12) DC-1350 (7-1/2 x 18) DA-700 (8-1/4 x 16) Emsco F-1600 (7 x 12) DC-1650 (7-1/2 x 18) DA-850 (8-1/4 x 18) FA-1300 (7 x 12) FC2200 (7 x 12) DB-1000 (7-1/2 x 18) FA-1600 (7 x 12) FC1600 (7 x 12) DB-850 (7-1/2 x 18) FA-1300 II (7 x 12) FA-1600 II (7 x 12) FB-1300 (7 x 12) FB-1600 (7 x 12) WH-440 WH-770 W-1500 15W-600 (7 x 16)