mud pump water well drilling manufacturer

The 2,200-hp mud pump for offshore applications is a single-acting reciprocating triplex mud pump designed for high fluid flow rates, even at low operating speeds, and with a long stroke design. These features reduce the number of load reversals in critical components and increase the life of fluid end parts.

The pump’s critical components are strategically placed to make maintenance and inspection far easier and safer. The two-piece, quick-release piston rod lets you remove the piston without disturbing the liner, minimizing downtime when you’re replacing fluid parts.

Lone Star Drills, a division of Little Beaver Inc. and manufacturer of efficient and portable drilling equipment, upgraded its LS200H and LS200H+ model drills with a Flomax 10 mud pump powered by an 8-horsepower Honda GX240 gas engine. The enhanced pump gives operators greater drilling speeds with approximately 40% more pressure and 30% more gallons of mud flow per minute over the previous pump setup.

“A mud pump is a crucial piece of equipment for ensuring mud rotary drilling efficiency,” said Joe Haynes, president of Little Beaver. “The feedback we’ve received from trials with this new setup has been outstanding. Crews were drilling noticeably faster than before because the system is providing a better flow of mud into the borehole, so we’ve made the new pump and engine a permanent fixture in our drill lineup.”

The new pump and engine come standard on the LS200H and LS200H+ hydraulic water well drills and are an optional upgrade for the LS100 and LS200 mechanical water well drills. A 10-horsepower Yanmar L100N diesel option is also available to power the Flomax on the LS200H and LS200H+.

The new Flomax 10 pump paired with the 8-horsepower engine provides 61 psi and 200 gallons of mud flow per minute, an upgrade of nearly 20 psi and an additional 50 gallons of flow per minute. The Flomax features a 2-by-2-inch inlet and outlet and incorporates tighter tolerances to handle the increased pressure from the larger engine.

Haynes said the increased pressure allows the new pump setup to not only quickly fill the borehole with a column of mud to remove cuttings more efficiently during drilling, but also handles thicker mud than the previous pump system. This provides crews with increased borehole stability as it replaces the dirt removed during drilling.

Lone Star Drills’ LS200H and LS200H+ water well drills are capable of drilling depths of 200 feet, borehole diameters of six inches and pull/push-back forces up to 5,000 pounds. The first drills in the Lone Star hydraulic lineup, the LS200H and LS200H+ feature 2,500- and 3,000-psi hydraulic systems respectively. Both drills can be upgraded with a down-the-hole hammer kit, anchor kit, wheel kit and more.

The 42-year-old, family-owned American Drilling Services in Florida, relied on homemade drill rigs to complete primarily 2- to 4-inch residential water wells. With demand increasing, they began looking for newer technology in order to complete more mud pump well drilling.

“Technology is always changing. We used to drill galvanized steel with cable drilling. Now we’re exclusively rotary drilling,” said William Diaz, driller, who has been with the company for seven years. “The technology gets better, and things get easier.”

“We used to do one well per day, occasionally two. The DM250 has helped us keep up with the workload by being able to drill quicker,” Diaz said. “The pulldown power of the top head is significantly stronger than our previous rigs. With the mud pump, we can clean out the hole a lot faster, which means less waiting around.”

“We’re not breaking down all the time, which is a huge advantage compared to our older rigs,” Diaz said. “Overall it’s a great rig. I recommend the DM250 to anyone doing 2- to 4-inch wells. It makes me happier because I’ve now got air conditioning, and I love the self-feed carousel. It’s a fast, great rig.”

Continental Emsco Drilling Products, Inc., which consisted of Emsco drilling machinery and Wilson mobile rigs, was purchased by National-Oilwell, Inc on July 7, 1999. To our knowledge, no pumps have been manufactured and sold under the Emsco brand name since National-Oilwell acquired them.

Fairbanks Morse pumps are currently manufactured in Kansas City, Kansas. Fairbanks Morse is a division of Pentair ever since August, 1997 when Pentair purchased the General Signal Pump Group.

Gaso pumps are manufactured by National Oilwell Varco. Gaso was acquired as "Wheatley Gaso" by National-Oilwell in the year 2000. At the time, Wheatley Gaso was owned by Halliburton.

Skytop Brewster pumps are no longer available as new pumps. Skytop Brewster(Cnsld Gold), a unit of Hansen PLC"s Consolidated Gold Fields subsidiary, was acquired while in bankruptcy by National-Oilwell, Inc. in November, 1999.

Greetings Tim & Charlott, below is a GPS link and information on the well we just installed in the honor of Tim & Charlott King! Your love and commitment has allowed our Clean Water 4 Life ministry to sink over 500 water wells for those in need here in the Solomon Islands! Here is a link to read my current newsletter with lots of pictures! http://www.rickrupp.com/newsletter.php

Togokoba SSEC Church & Community is approx 58 kilometers east of Honiara. It was a long bumpy drive to this village. I had to walk a long way to get to the place where they lived. They explained that their source of drinking water was the stream. They were so happy when I explained that our CW4L team was going to come sink a well right in their village. I tasted the well water several weeks later after our team had blessed them with a water well. It tasted so good! It was nice clean & cold water! It never ceases to amaze me that there is such a nice water table here in the rural areas of the Guadnacanal plains! I counted 10 houses in this community and the population is approx 80 people. Now they finally have a source of clean drinking water! These people have suffered for many years either drinking from an open hand dug well or from the stream. Togokoba SSEC Church & Community is very grateful to our CW4L sponsors.

When choosing a size and type of mud pump for your drilling project, there are several factors to consider. These would include not only cost and size of pump that best fits your drilling rig, but also the diameter, depth and hole conditions you are drilling through. I know that this sounds like a lot to consider, but if you are set up the right way before the job starts, you will thank me later.

Recommended practice is to maintain a minimum of 100 to 150 feet per minute of uphole velocity for drill cuttings. Larger diameter wells for irrigation, agriculture or municipalities may violate this rule, because it may not be economically feasible to pump this much mud for the job. Uphole velocity is determined by the flow rate of the mud system, diameter of the borehole and the diameter of the drill pipe. There are many tools, including handbooks, rule of thumb, slide rule calculators and now apps on your handheld device, to calculate velocity. It is always good to remember the time it takes to get the cuttings off the bottom of the well. If you are drilling at 200 feet, then a 100-foot-per-minute velocity means that it would take two minutes to get the cuttings out of the hole. This is always a good reminder of what you are drilling through and how long ago it was that you drilled it. Ground conditions and rock formations are ever changing as you go deeper. Wouldn’t it be nice if they all remained the same?

Centrifugal-style mud pumps are very popular in our industry due to their size and weight, as well as flow rate capacity for an affordable price. There are many models and brands out there, and most of them are very good value. How does a centrifugal mud pump work? The rotation of the impeller accelerates the fluid into the volute or diffuser chamber. The added energy from the acceleration increases the velocity and pressure of the fluid. These pumps are known to be very inefficient. This means that it takes more energy to increase the flow and pressure of the fluid when compared to a piston-style pump. However, you have a significant advantage in flow rates from a centrifugal pump versus a piston pump. If you are drilling deeper wells with heavier cuttings, you will be forced at some point to use a piston-style mud pump. They have much higher efficiencies in transferring the input energy into flow and pressure, therefore resulting in much higher pressure capabilities.

Piston-style mud pumps utilize a piston or plunger that travels back and forth in a chamber known as a cylinder. These pumps are also called “positive displacement” pumps because they literally push the fluid forward. This fluid builds up pressure and forces a spring-loaded valve to open and allow the fluid to escape into the discharge piping of the pump and then down the borehole. Since the expansion process is much smaller (almost insignificant) compared to a centrifugal pump, there is much lower energy loss. Plunger-style pumps can develop upwards of 15,000 psi for well treatments and hydraulic fracturing. Centrifugal pumps, in comparison, usually operate below 300 psi. If you are comparing most drilling pumps, centrifugal pumps operate from 60 to 125 psi and piston pumps operate around 150 to 300 psi. There are many exceptions and special applications for drilling, but these numbers should cover 80 percent of all equipment operating out there.

The restriction of putting a piston-style mud pump onto drilling rigs has always been the physical size and weight to provide adequate flow and pressure to your drilling fluid. Because of this, the industry needed a new solution to this age-old issue.

Enter Cory Miller of Centerline Manufacturing, who I recently recommended for recognition by the National Ground Water Association (NGWA) for significant contributions to the industry.

As the senior design engineer for Ingersoll-Rand’s Deephole Drilling Business Unit, I had the distinct pleasure of working with him and incorporating his Centerline Mud Pump into our drilling rig platforms.

In the late ’90s — and perhaps even earlier —  Ingersoll-Rand had tried several times to develop a hydraulic-driven mud pump that would last an acceptable life- and duty-cycle for a well drilling contractor. With all of our resources and design wisdom, we were unable to solve this problem. Not only did Miller provide a solution, thus saving the size and weight of a typical gear-driven mud pump, he also provided a new offering — a mono-cylinder mud pump. This double-acting piston pump provided as much mud flow and pressure as a standard 5 X 6 duplex pump with incredible size and weight savings.

The true innovation was providing the well driller a solution for their mud pump requirements that was the right size and weight to integrate into both existing and new drilling rigs. Regardless of drill rig manufacturer and hydraulic system design, Centerline has provided a mud pump integration on hundreds of customer’s drilling rigs. Both mono-cylinder and duplex-cylinder pumps can fit nicely on the deck, across the frame or even be configured for under-deck mounting. This would not be possible with conventional mud pump designs.

The second generation design for the Centerline Mud Pump is expected later this year, and I believe it will be a true game changer for this industry. It also will open up the application to many other industries that require a heavier-duty cycle for a piston pump application.

With a wide variety of water well drills available online, it can be difficult to discern which features provide the best return on investment. As with bargain shopping, most items sold at discounted rates are cheaper for a reason. The headaches and downtime that come with addressing breakdowns, insufficient parts supply, poor support and premature failure often render the low initial investment useless. Cheaper is rarely better when it comes to the cost of a quality product. One way to protect your drill investment is to look for specific features that indicate the drill will be reliable and efficient for years to come.

Mud rotary drilling is one of the fastest, most efficient methods of drilling today with superior penetration rates for a wide range of soil conditions. When using a mud rotary drill, one of the most essential components in the drilling process is the mud pump. The mud pump provides the power needed to clear the hole of cuttings — broken bits of solid material — that might otherwise hinder drilling.

When purchasing a mud rotary drill, it will come with two engines. One engine is used for the rotary or hydraulic system while the second engine controls the mud pump to ensure the unit will operate at optimum speed and efficiency for the application. Some manufacturers skimp on production costs by using small, underpowered engines on the mud pump, the rotary or hydraulic system, or both. This means the engine is always working harder to get the job done, which causes faster wear and increases the amount of servicing and repairs.

It’s important to note that a high-quality engine on the drill can only do so much if there isn’t a high-quality mud pump to support it. Although it might be tempting to buy a drill package with a cheap mud pump or to overlook this critical component, cutting corners can result in poor performance if the mud pump isn’t able to adequately support the drilling function.

Although it might be tempting to buy a drill package with a cheap mud pump or to overlook this critical component, cutting corners can result in poor performance if the mud pump isn’t able to adequately support the drilling function.

For shallower drilling projects, 5.5 horsepower engines should get the job done. These drill packages provide a maximum flow of 165 gpm and produce a maximum head of 100 feet. Some manufacturers offer packages for larger drills with mud pumps that provide up to 13 horsepower for achieving depths of up to 300 feet. These types of drill packages are designed to dig deeper, with engines that power the mud pump for a maximum flow of 200 gpm and a 2-inch suction and discharge that produces a maximum head of 190 feet. For added convenience, check to see if your manufacturer offers both gas and diesel engine options so you can choose which works best for you.

Choosing a quality drill package from a reputable manufacturer means the mud pump will provide optimal performance in demanding environments and the highest productivity when paired with the drill.

Like the engines and mud pump, the construction of a water well drill can easily make or break a job when it comes to efficiency and ROI. Although drills might not look much different on the outside, taking a deeper look into specs — including the materials used during construction — can help make a quality water well drill stand out from the competition.

In addition, look for manufacturers that use 2-inch-diameter drill pipes and connections made of heat-treated alloy steel. This is ideal in demanding environments and ensures fewer replacements down the road. Some manufacturers cut costs by using irrigation-type pipes measuring only ¾- or 1-inch in diameter. These smaller pipes are intended for less intense applications like sprinkler installation and can break off when used in demanding environments, which can cause delays and other frustrations like re-drilling.

In addition to finding a quality water well drill, no purchase is complete without selecting a rotary drill bit, which is critical to both longevity and performance. Using a bit that aligns with the soil conditions prevents wear and tear by helping the drill power through the soil. This can save money on drill and bit replacements in the future. Make sure the manufacturer has a variety of bits available to provide optimal performance based on the soil type.

Proper training helps operators become familiar with equipment and provides a hands-on opportunity to view the drill and learn safe operation and maintenance procedures. It can also build an understanding of the distinct roles of the individual drill team members. This, in turn, minimizes confusion regarding individual responsibilities and reduces injuries on the job. Some manufacturers host training sessions at their facility and offer water well drill kits with necessary accessories to ensure operators get the most out of the drill.

By narrowing down the criteria for selecting a quality water well drill and focusing on features like a reliable mud pump, strong construction, excellent training and a variety of available accessories, operators and businesses will be set for long-term success. Using a quality water well drill will not only increase efficiency, it will also minimize downtime from repairs and maximize ROI.

A Mud Pump is an essential part of the Drilling rig used for Water well Drilling in India. TIRUPATI ENTERPRISES is one of the top accessories manufacturers, and we design our Mud Pumps in such a way that it has smooth operation, minimal vibration and very low noise. The structure of these Mud Pumps is serene and straightforward for the disassembly and has a low maintenance cost. Being one of thetop Water well Drilling rig manufacturers in India

American Mfg Company’s roots lie in the fertile soil of America’s water-well Industry. When American Mfg Company opened it’s doors in 1986 it was a company 100% dedicated to manufacturing the highest quality spare parts for the water-well drilling industry.

While we may have grown a bit since the mid 80’s, and added several new divisions to our product line, our passion of manufacturing 100% identical and interchangeable parts for the water-well drilling pumps hasn’t wavered in the slightest. In fact, over the past 5 years we’ve added 3 complete duplex pumps which are OEM equipment for the most reputable water-well drilling rig manufacturers in the industry.

The government push towards geothermal heat has lead to an explosion in the geothermal drilling industry. A fairly new industry for American Mfg Company, we dove head in with our revolutionary 5” X 5” duplex mud pump which delivers the mud volume of a 5” X 6 pump, with the footprint of a 4.5” X 5”.

TheZX-1000 is a 16 HP Gravity Type (drilling pressure applied by the weight of the power head) portable drilling rig with many built-in standard features. It comes standard with 125" of 1-1/4" Drill Stem with wide thread machined tool joints, 2 Carbide Drill Bits (your choice of sizes), Adjustable Slip Assembly, High Capacity Water Swivel(The Key Feature, Our Own Proven Design), 12 Volt Electric Winch with Remote Control, 2X2 Mud / Trash Pump. It includes a choice of engine configurations, Import or Kohler Electric Start, and more. Please call for detailed spec sheet.

The PTO Rig is among our strongest drilling rigs, it is Fully Hydraulic, Chain Drive, 3 Point Hitch, it includes 200" of 1-1/4" Drill Stem with wide thread machined tool joints, 2 Carbide Drill Bits (your choice of sizes), Adjustable Slip Assembly (Our Own Proven Design), PTO Pump, Mud Pump, Built-In Hydraulic Resevoir, High Capacity Water Swivel(Our Own Proven Design). Please call for detailed Spec Sheet.

Preferred Pump offers the best rewards program in the water well equipment industry. Check out our social media pictures to see what you"ve been missing!

Ultimately, when you reach the depth where you can’t pull up the drill string, you’ve reached the rig’s capacity. Based on this criteria, though, the max capacity rating of the SIMCO 7000, SIMCO’s largest rig would be well over 5000 feet.

Realistically, with any mud rotary drill rig, you’ve reached maximum depth capacity when you can no longer move the cuttings out of the hole. This is where having mud pump options becomes important.

Generally, there are several different versions of mud pumps available. With the SIMCO 7000 you can choose between centrifugal and piston pumps and different sizes with different depths and borehole diameters to suit your specific drilling needs.

Because each rig is built to your specifications, choosing the best mud pump for your goals takes into consideration many additional factors. Bore hole size, drilling conditions, geology, the mud mixture, and the desired depth capacity all have bearing on which mud pump will be the best fit for your personal drilling rig. By offering these different options, SIMCO helps you avoid the pitfalls of spending more money for a capacity you don’t need.

Give our sales department a call at 800-338-9925 or reach out through our contact page to learn more about the options on the SIMCO 7000 or any of our outstanding drilling systems.