mudpuppy mud pump price

Mud Puppy is owned and operated by people with years of experience in the drilling industry, which means we understand the challenges you face in the field. We exist to save you time and money while on the job.

Our self-contained, mud-recycling units use less water than traditional methods which result in cleaner mud for further drilling. No longer will you and your crew be left to shovel sand from the mud tanks as the Mud Puppy does the work faster and more efficient than ever before.

MudPuppy’s MP255-400 with mud pump sets up in just a few minutes. No settling pit to dig and fill. Only 100 gallons of water needed to get started. You can easily switch from air to mud and mix only the amount of mud needed to drill the hole.

The MudPuppy was designed to efficiently remove rocks and sand from drill mud, making the mud and jobsite cleaner. With clean mud, the problems of wear and tear on the mud pump, drill string, and other parts are significantly reduced.

Brand new, never used, 750 gallon tank, 74 hp Tier 4F/Tier 5 European Hatz water cooled diesel engine, 3 x 5 double screen shaker bed, 3 x 4 centrifugal pump, 4 desander cones, with powder coat finish

2 compartment, trailer munted, 30 kw diesl generator, south attenuated weatherproof enclosure, single high G-force liner shaker with split screens, high shear submersed turbo jet guns, desilter with 5” hydrocyclone, (3) 2 x 3 centrifugal mud pumps, 110 volt outlets for accessories, hopper with sack table, easy open cleanouts, mounted on tandem axle pintel hitch trailer, currently working  Price:  $37,500

2200gal Split wall tank, Twin Cummins 3.9 deck, W/3"-4" centrifugal mixing ,desilting, agitation pump . Mechanical Seals, 5.9 Turbo @2500 rpm W/3"x4" Chrome centrifugal down hole pump. Mechanical Seals desanded return with cross tank flow back flange (For sudden fluid loss), Twin 4"x5" hydraulic shaker dual screen deck, 4 Jack hydraulic leveling system. 27000GVWR tandem axles w/electric brakes . trailer can be legally pulled in NV safety by 1-ton . Brakes are excellent. @20000.GVW, Hydraulic ports for Tibban type mud return sump pump . In tank cooling.  Unit capable of 1000"x 24" drill bore with 3-1/2IF Drill string. Using open jet Tricone or similar. Unit is ready    Price:  $77,500

Manufactured 2004, Deutz diesel engine,  dual shale shaker, down hole centrifugal pump, mud mixing pump, 1000 gal capacity, 500 gpm system   PRICE: $112,000

3 x 2 Baker centrifugal pump, powered by 3 cyl Lister, mud puppy pick up pump, hydraulic power pack, barrel shaker, desander, dual 2000 gal mud tanks, mounted on gooseneck trailer  Price:  $60,000

5 x 8 screen, 3 x 4 mission centrifugal pump, desanding cones, 300 gpm pickup pump, 2009 Cummins 110 hp motor with 7,150 hours, mounted on 3 axle trailer  Price:  $19,500

Mounted in 16" trailer with 3 stabilizing jacks, sand guzzler, 3 x 2 centrifugal pump needs replacing, 3100 hours, includes 4" hose for pick up pump  Price:  $49,500

Deutz diesel engine with brand new turbo, 3 cone manifold, new style hydraulic Parker pump and new style shakers, newer 118 pump, trailer mounted  PriceL $55,000

Built 2021, trailer mounted, 100 hp John Deere diesel engine, 100 kw generator fully enclosed, 4 hydraulic leveling jacks, (2) 3 x 4 centrifgual mud pumps with mechanical seals, 3000 gallon 2-section tank with mud guns in the tank, excellent condition  Price:  $187,500

1000 gal (approx.) 2-section tank, H G-force linear split shaker, centrifugal pump for mixing and desander, 480 volt/3 phase generator, 320 gpm cleaning capacity  POR

Built 2019, 156 hours, 2400 gal capacptiy two section tank, split equally for clean and dirty volume.  High G-force linear shaker, 18 sq ft shale shaker screening area, 18 sq ft desilter screening area, 36 sq ft total screening area with long runway, (6) 5” cones, 450 gpm cleaning capacity.  25hp 178 Series electric centrifugal pump to pressure feed hydrocyclones, 30 hp 178 series electric centrifugal pump to pressure feed hopper, jet guns and supercharge.  480 volt/60kw/3 phase diesel generator, safety shutdowns on engine and generator.  High shear/low pressure mixing hopper, sack table, high shear submersed jet guns in both tanks, independent valves to isolate hopper and jet guns, mounted on 12k dual tan axle trailer, pintle hitch, electric brakes, 24’L x 8’4”W x 12’4” H – 20,140 lbs.  Price:  $172,950

4500 gallons, (2) 4 x 5 scalping shakers, (1) 4 x 5 linear desilting shaker, 5 x 6 centrifugal desilting pump (800 gal per minute capacity), 5" desilting cones, (2) additional tanks available which will provide 20,000 gallon circulation system, semi-mounted with air bag suspension (extra axle comes with unit)  Price:  $165,000

Direct rotary circulation 4500 gallons, (2) linear shakers (600 gal – scalping and desilting), 5 x 6 centriugal desilting pump (800 gal per minute capacity), 5" desilting cones, 5 x 6 Mission Sandmaster pickup pump, all electric with control panels and lighting, mud mixers, semi mounted  Price:  $190,000

2000 gallon, (2) deck shaker/scalping and desilter (500 gpm capacity), (2) 3 x 4 centrifugal pumps (500 gpm capacity), 5" desilting cones, electric powered pumps, 75 kw Onan gen set with Tier 3 Cummins engine (low hours), all electric with control panels, mud mixer, Mission Sandmaster electric pickup pump, outriggers, trailer mounted. Low hours on entire unit  Price:  $140,000

4500 gallons, (2) linear shakers (600 gallons – scalping and desilitng), 5 x 6 centrifugal desilting pump (800 gallons per minute capacity), 5" desilting cones, 5 x 6 Mission Sandmaster pickup pump, all electric with control panels and lighting, mud mixers, semi-mounted  Price:  $215,000

GEO-LOOP 40-500 GROUT PUMP(Ref#9753R)  Manufactured 2010, engine removed, Geo-Loop mid-set hose reel with swivel base, mounted on tandem axle trailer  Price on Request

CHEMGROUT MODEL CG625 COLLOIDAL MIXER(Ref#9899R)  Deutz F2L511 air cooled engine two cylinder with 12 volt electric start, centfigual slurry pump Model G1387, 2 x 3 x 12 Krough pump, grout pump Model 2J6 CDQ open throat    PRICE REDUCED:  $32,500

We manufacture a complete line of solids control equipment including; mud reclaimers & mud recyclers, shale shakers, de-silters, de-sanders, and pump packages, all for sale or for rent, allowing us to achieve a higher standard of excellence.

A large inventory of parts and accessories , and knowledgeable staff makes Mud Technology the smart choice for operators needing fast-turnaround times and competitive pricing.

Our staff is available to assist you with complete line of parts, including pump parts, shaker screens and drilling mud all available at competitive prices. As we are just a phone call away, we are available to answer questions and assist you with troubleshooting while you are in the field.