oil rig mud pump diagram pricelist

The 2,200-hp mud pump for offshore applications is a single-acting reciprocating triplex mud pump designed for high fluid flow rates, even at low operating speeds, and with a long stroke design. These features reduce the number of load reversals in critical components and increase the life of fluid end parts.

The pump’s critical components are strategically placed to make maintenance and inspection far easier and safer. The two-piece, quick-release piston rod lets you remove the piston without disturbing the liner, minimizing downtime when you’re replacing fluid parts.

Maintaining /monitoring the mud pumps and mud pits during operations. Notifying the Driller immediately of any unexplained pit level increases/decreases Verify and record drilling fluid properties at ...

and decisivemanner Otherduties as required by the Rig Manager Minimum Qualifications: Ability to perform essential functions of this position with or without reasonable accommodations. Previous ...

and decisivemanner Otherduties as required by the Rig Manager Minimum Qualifications: Ability to perform essential functions of this position with or without reasonable accommodations. Previous ...

and decisivemanner Otherduties as required by the Rig Manager Minimum Qualifications: Ability to perform essential functions of this position with or without reasonable accommodations. Previous ...

Assist internal and external customers with troubleshooting of Rig Equipment (Top Drive, Catwalk, Wrench, Drawworks, VFDs, Generators, Mud Pumps, BOP) Expeditiously work to troubleshoot and resolve downtime ...

include but are not limited to safely and efficiently performing all tasks within the Rig Operations Areas of the Platform at the direction and under the supervision of the Crane Operator. Tasks may include ...

and special projects as may be directed. Additional functions N/A Qualifications Necessary qualifications, skills and abilities Able to identify and understand functionality of various rig equipment. ...

and special projects as may be directed. Qualifications Necessary qualifications, skills and abilities Able to identify and understand functionality of various rig equipment. Able to identify and understand ...

include but are not limited to: Safely and efficiently performing all tasks on the rig floor and B.O.P. area under the direction and supervision of the Driller. Operating the tongs, slips, and spinners ...

The Driller must STOP the job if the situation is unsafe and report to Tool pusher. Conducts operations in a safe manner according to Policies and Procedures. Applies proper rig operating procedures, ...

as required by the Driller, Derrickhand or Rig Manager Minimum Qualifications: Ability to perform essential functions of this position with or without reasonable accommodations Ability to ...

as required by the Driller, Derrickhand or Rig Manage Minimum Qualifications: Ability to perform essential functions of this position with or without reasonable accommodations Ability to ...

Assists the Crew Pusher and/or TRS Lead in carrying out all routine, non-routine and emergency operational activities around the rig floor areas or any other area of the rig location as designated by ...

OILFIELD INSTRUMENTS PRESSURE INDICATING SYSTEM DRILLING INSTRUMENTATION ...Quality is Everything... Contact Rigchina Group Company for more information on our complete line of Oilfield Instruments, drilling fluids testing equipment and instrumentation for oil and gas industry. Call us today, or visit our website at www.rigchina.com © Copyright 1996-2016 Rigchina Group Company All rights reserved. Tel: 0086-579-87537698(switchboard) Fax: 0086-579-8753 696 Rev.2015 URL: http://www.rigchina.com Email: sales@rigchina.com SKYPE:RIGCHINA Add: No.80-82, Qiude Rd, West Cheng Industrial Estate, Yongkang city Zhejiang Province, China 321300

OILFIELD INSTRUMENTS PRESSURE INDICATING SYSTEM 1 MUD PUMP PRESSURE GAUGES Rugged standpipe-type gauges provide dependable, accurate pressure readings RIGCHINA Stand Pipe Gauges provide a quick, accurate display of pump pressure. Main applications are for standpipes and to be mounted on mud pumps. This style of gauge has been in service for many years and has proven to be a tough, dependable and reliable way to monitor pump pressure. Interchangeable with Cameron type gauges Temerature range -20 to 250(-29 to 121) 3 gauge models offering a multitude of sizes,pressure ranges and sub end...

OILFIELD INSTRUMENTS FEATURES: Diameter: 4-7/8"(124 mm), Height: 10-1/16" (256 mm) Pressure range: 7MPa, 14MPa, 21MPa, 25MPa, 35MPa, 40MPa, 60MPa, 80MPa, 100MPa, 120Mpa,160MPa 1,000 PSI, 1500PSI 3,000 PSI. 5,000 PSI, 6,000 PSI, 10,000 PSI, 15,000 PSI and 20,000PSI 70 Bar, 140 Bar, 210 Bar, 350Bar, 420 Bar, 700Bar, 1,040 Bar and 1,400 Bar Temperature range: -50°F to 180°F Liquid surrounding gauge mechanism minimizes wear from vibration and mechanical shock Heavy duty seals create watertight barrier around gauge mechanism Combination threaded male 2" line pipe and threaded female 1" line pipe...

OILFIELD INSTRUMENTS TYPE D PRESSURE GAUGE (MODEL 7) Model D Gauge for capacities up to 6,000 PSI FEATURES: Standard capacities of: 1,000 p.s.i., 3,000 p.s.i. 5,000 p.s.i and 6,000 p.s.i. 70 Bar, 210 Bar 350 and 420 Bar * 2" Nutted version available Tel: 0086-579-87537698(switchboard) Fax: 0086-579-8753 696 Rev.2015 URL: http://www.rigchina.com Email: sales@rigchina.com SKYPE:RIGCHINA Add: No.80-82, Qiude Rd, West Cheng Industrial Estate, Yongkang city Zhejiang Province, China 321300

OILFIELD INSTRUMENTS Temperature range: -50°F to 180°F Liquid surrounding gauge mechanism minimizes wear from vibration and mechanical shock Heavy duty seals create watertight barrier around gauge mechanism Impact resistant, clear polymer lens Connects with threaded female 2" line pipe TYPE E PRESSURE GAUGE (MODEL 8) Model 8 Gauge for capacities up to 20,000 PSI Tel: 0086-579-87537698(switchboard) Fax: 0086-579-8753 696 Rev.2015 URL: http://www.rigchina.com Email: sales@rigchina.com SKYPE:RIGCHINA Add: No.80-82, Qiude Rd, West Cheng Industrial Estate, Yongkang city Zhejiang Province, China...

OILFIELD INSTRUMENTS Liquid surrounding gauge mechanism minimizes wear from vibration and mechanical shock Heavy duty seals create watertight barrier around gauge mechanism Impact resistant, clear polymer lens Dial sizes: 8-1/8" (206 mm) dials Tel: 0086-579-87537698(switchboard) Fax: 0086-579-8753 696 Rev.2015 URL: http://www.rigchina.com Email: sales@rigchina.com SKYPE:RIGCHINA Add: No.80-82, Qiude Rd, West Cheng Industrial Estate, Yongkang city Zhejiang Province, China 321300

OILFIELD INSTRUMENTS FEATURES: Standard capacities of: 7MPa,14MPa,21MPa,25MPa,35MPa,40MPa,60MPa,80MPa,100MPa,120MPa and 160MPa 1,000 PSI, 1500PSI 3,000 PSI. 5,000 PSI, 6,000 PSI, 10,000 PSI,15,000 PSI and 20,000PSI 70 Bar, 140 Bar, 210 Bar, 350Bar, 420 Bar, 700Bar,1,040 Bar and 1,400 Bar Accuracy: ± 1.6% of full range Threaded:2” LPT male with 1” LPT female Temperature range: -50°F to 180°F TYPE RC-100 PRESSURE GAUGE Model RC-100 Gauge for capacities up to 20,000 PSI Tel: 0086-579-87537698(switchboard) Fax: 0086-579-8753 696 Rev.2015 URL: http://www.rigchina.com Email: sales@rigchina.com...

OILFIELD INSTRUMENTS FEATURES: Standard capacities of: 7MPa,14MPa,21MPa,25MPa,35MPa,40MPa,60MPa,80MPa,100MPa,120MPa and 160MPa 1,000 PSI, 1500PSI 3,000 PSI. 5,000 PSI, 6,000 PSI, 10,000 PSI,15,000 PSI and 20,000PSI 70 Bar, 140 Bar, 210 Bar, 350Bar, 420 Bar, 700Bar,1,040 Bar and 1,400 Bar Dial sizes: 124 mm dials Accuracy: ± 1.6% of full range Threaded:2” LPT male with 1” LPT female or 2” LPT female Temperature range: -50°F to 180°F Liquid surrounding gauge mechanism minimizes wear from vibration and mechanical shock Heavy duty seals create watertight barrier around gauge mechanism Impact...

OILFIELD INSTRUMENTS Liquid surrounding gauge mechanism minimizes wear from vibration and mechanical shock Heavy duty seals create watertight barrier around gauge mechanism Impact resistant, clear polymer lens Main Technical Specification Part-No. Description &Technical Parameters Dial sizes: 4-7/8" (123 mm) dials Accuracy: ± 1.6% of full range Pressure Range: 7MPa,14MPa,21MPa,25MPa,35MPa,40MPa,60MPa,80MPa, 100MPa,120MPa and 160MPa 1,000 PSI,1500PSI 3,000 PSI. 5,000 PSI, 6,000 PSI, 10,000 PSI,15,000 PSI and 20,000PSI 70 Bar, 140 Bar, 210 Bar, 350Bar, 420 Bar, 700Bar, 1,040 Bar and 1,400 Bar...

OILFIELD INSTRUMENTS Dial sizes: 8-1/8" (206 mm) dials Accuracy: ± 1.6% of full range Threaded:FLANGE,1.81,RJ,BX-151 FLANGE,2.06,RJ,R-24 FLANGE,2.06,RJ,BX-152 FLANGE,3.12,RJ,R-35 Pressure Range: 7MPa,14MPa,21MPa,25MPa,35MPa,40MPa,60MPa,80MPa, 100MPa,120MPa and 160MPa 1,000 PSI, 1500PSI 3,000 PSI. 5,000 PSI, 6,000 PSI, 10,000 PSI,15,000 PSI and 20,000PSI 70 Bar, 140 Bar, 210 Bar, 350Bar, 420 Bar, 700Bar, 1,040 Bar and 1,400 Bar Size: 6.5" × 6" × 10.2" (16.5 × 15 × 26 cm) ,Weight: 35lb (16 kg) Dial sizes:3.94" (100 mm) dials Accuracy: ± 1.6% of full range Pressure Range:...

OILFIELD INSTRUMENTS 2 PRESSURE INDICATING SYSTEM RIGCHINA’s PRESSURE gauges provide quick, accurate readings of your rigs. 2.1 E-17 DIAPHRAGM PROTECTOR 1:1 Piston Protects measuring or recording device from working fluid while transmitting no-lag, linear pressure signal. Rugged workhorse sensor found in every corner of the world doing every conceivable pressure sensing job. Robust, time proven design allows easy field repair and maintenance. Available in flanged, threaded, and weld on female sub configurations. Certified models available E-17 Diaphragm Protector. The Debooster is a stepped...

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Togokoba SSEC Church & Community is approx 58 kilometers east of Honiara. It was a long bumpy drive to this village. I had to walk a long way to get to the place where they lived. They explained that their source of drinking water was the stream. They were so happy when I explained that our CW4L team was going to come sink a well right in their village. I tasted the well water several weeks later after our team had blessed them with a water well. It tasted so good! It was nice clean & cold water! It never ceases to amaze me that there is such a nice water table here in the rural areas of the Guadnacanal plains! I counted 10 houses in this community and the population is approx 80 people. Now they finally have a source of clean drinking water! These people have suffered for many years either drinking from an open hand dug well or from the stream. Togokoba SSEC Church & Community is very grateful to our CW4L sponsors.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

—–Liners——Mission Ceramic Liner——Mission Supreme Liner—–Piston Rods——Blak-JAK HydrA-LIGN Piston Rod System——Mission Self Aligning Piston Rod—–Pistons——Mission Green Duo Piston——Mission Slip Seal Bullitt Piston——Mission Supreme Piston——Mission Blue Lightning Piston——Mission White Lightning Bonded Piston——Mission White Lightning Slip Seal Piston—–Valves and Seats——Mission FK-1 Valve——Mission FK-N Valve——Mission Roughneck™ and Roughneck™ HP——Mission Service Master II——Mission Silver Top Valves and Seats——Mission Super Service Vavles and Seats——Service Master Drilling Valve——Supreme Valve and Seat—–Fluid End Modules and Accessories——Fluid End Accessories——-Blak-JAK Torque Pro——-Blak-JAK Torque Pro Lite——-Mission Bushing X-tractor——Liner Retention Systems——Modules (Mission L 7500 Module)—–Fluid Transfer Systems——Brine Filtration System——Centrifugal Pump Unitization Configurations——Custom Cooling Solutions——High Pressure Wash down Systems——NOV Mission Potable/Sanitary Water Pressure Sets——Resources—–Handling Tools——Adapter Rings——Air Operated Elevators——-A-Series Collar Type——-G-Series 18 Degree Center Latch——-Y-Series Slip Type——BHAT——Bushings——-Casing Bushings——-Casing Spiders——-MBH 1250——-MDSP Series——-MPCH Series——-MSPC Series——-MSP Series——-Roller Kelly Bushings——Casing Running Tools——-CRT 350 and 500 Casing Running Tool——Custom Dies and Inserts——Elevator Spiders and FMS——-BJ-250——-BJ-350——-FMS-275——-FMS-375——-V-1000——-V-500——-V-750——Hydraulic Elevators——-BX-3——BX-4-35——BX-4-50——BX-4-75——BX-5——BX-7——BXS Series——H-SJH Type——UX Horse Shoe——Links——-Perfection Links——-Weldless Links——Manual Elevators——-A-Series Collar Type——-DC Dolly——-G-Series 18 Degree Center Latch——-S-Series Auxiliary——-SBX7——-X-Series Collar Type Side Door——-Y-Series Slip Type——Manual Tongs——-HT Manual Tongs——Power Slips——-Power Slip Frame——-PS-15 Power Slip——-PS-16 Power Slip——-PS-21 Power Slip——-PS-30 Power Slip——-PF495 Power Slip——-SLT——Power Tools——-KS-6600——-KS-6800——-SSW-30——-SSW-40——-TW-61 Hydraulic Torque Wrench——Rotary Support Tables——-RST375——-RST495——-RST495 False——-RST495 Heavy——-RST495 Without Slip Ring——-RST605——-RST605 False——-RST605 Heavy——-RST605 Without Slip Ring——-RST755 Without Slip Ring——Slips——-CMS-XL——-DCS Series——-MP Series——-SD Series——-Type C——-UC-3——Resources——-BX Elevators TMS 1 of 2——-BX Elevators TMS 2 of 2——-Handling Tools TMS——-Rotary Support Table TMS—–Hoisting——Drawworks——-AHD Drawworks——–AHD-1000 Active Heave Drilling Drawworks——–AHD-1250 Active Heave Drilling Drawworks——–AHD-500 Active Heave Drilling Drawworks——–AHD-750 Active Heave Drilling Drawworks——-Drilling Drawworks——–AC Gear Driven Drawworks———ADS-10T AC Electric Gear Driven Drawworks———ADS-30Q AC Electric Gear Driven Drawworks———SSGD-1000 AC Gear Driven Drawworks———SSGD-1250 AC Gear Driven Drawworks———SSGD-360 AC Gear Driven Drawworks———SSGD-500 AC Gear Driven Drawworks———SSGD-750 AC Gear Driven Drawworks——–DC Chain Driven Drawworks———1625-UDBE DC Chain Driven Drawworks—–Iron Roughnecks——AR3200 Automated Iron Roughneck——HydraTong™ ARN-270——HydraTong™ MPT-270——Iron Roughneck Accessories——-Casing Module——-Hydraulic Mud Bucket——-Pipe Doper System——Resources——ST 100 Iron Roughneck——ST-120 Iron Roughneck——ST-160 Iron Roughneck——Jacking and Skidding——-Jacking Systems——-Jacking Claw Skidding Systems——-Rack and Pinion Skidding Systems——-Toggle Gripper System ——Lifting and Handling——-Market Segments——–Construction———SUBSEA CONSTRUCTION VESSEL———PIPELAY AND CABLELAY VESSEL———WINDMILL INSTALLATION VESSEL———CRANE VESSEL/ LIFT BOAT———IMR / WELL INTERVENTION VESSEL———ANCHOR HANDLING VESSEL——–Drilling———DRILLSHIP———JACK UP———SEMI SUBMERSIBLE———-FPSO/FPS———-SEMI SUBMERSIBLE/ SPAR/ TLP———-JACKET/ FIXED INSTALLATION——–Production———-FPSO/FPS———-SEMI SUBMERSIBLE/ SPAR/ TLP———-JACKET/ FIXED INSTALLATION——-Product Catalogue——–Anchor Handling Systems———Anchor Handling and Towing Winch———Anchor Handling Equipment Package———Secondary Winch——–Cranes———Next Generation Subsea Knuckle Boom Cranes———Box Boom Cranes———-Knuckle Boom Crane———-Single Boom Crane———-Telescopic Boom Crane———Lattice Boom Cranes———-Around the Leg Crane———-DNS Crane———-MSB Crane———-OC L Crane———-Unit Crane———Heavy Lift Cranes———-Around the Leg Crane———-MSB Crane———-Post Crane———-Tub Mounted Crane———Other Cranes———-A-Frame———-Stevedoring Cranes———Subsea Cranes———-Subsea Box Boom Crane———-Subsea MSB Crane——–Hose Loading Stations——–Mooring Systems———Mooring System for Drilling Units———Mooring System for Production Units——–Pipe Lay and Cable Lay Systems———Cable Lay Systems———Pipe Lay Systems———Tensioner———Upending Control Systems——–Riser Pull In Systems——Motion Compensation——-Crown Mounted Compensators (CMC)——-Direct Line Compensators (DLCs)——-Drill String Compensators (DSCs)——-N-Line Tensioner system——-Resources——-Tensioners——Offshore Units——-Drillship——-Fixed Platforms——-Jackup Rig——-Semi-submersible——-Well Intervention——Pipe Handling——-Horizontal Pipe Handling——–Catwalk Machines——–Catwalk Shuttle——–Pipe Deck Machines (PDM)——–Pipe – Riser Gantry Cranes——–Pipe Transfer Conveyor (PTC)——–PipeCat™ Laydown System——–Robotic Arms———DFMA-P——–DFMA-U——–UHT——-Horizontal-To-Vertical Pipe Handling——–Custom Dies and Inserts——–Hydraulic Mousehole——–Service and Access Baskets——-Pipe Handling Accessories——-Pipe Handling Cranes——-Resources——-Vertical Pipe Handling——–Racking Systems———PRS 4i/HR III———PRS5,6/HR IV———PRS8i and Hydraracker XY (HRXY)——–Standguard——Power Systems——-Hydraulic Power Units——-Motors——-Resources——-Energy Recovery——–Rotary Tables——Rotating Equipment——Structures——-Derricks——Top Drive Systems——-Fixed Electric Top Drives——-Resources——-Washpipe Systems