oteco mud pump gauges pricelist

The OTECO Pressure Gauge offers high accuracy and dependability for your standpipe, mud pump, and other drilling and production applications where precision pressure measurements are required.

The OTECO Pressure Gauge offers high accuracy and dependability for your standpipe, mud pump, and other drilling and production applications where precision pressure measurements are required.

The Oteco pressure gauge is engineered to deliver the performance demanded by today’s industries. It is specially constructed to withstand high shock and vibration and extreme temperatures. To prevent effects of mechanical shock and wear, these devices feature a highly effective dampening mechanism. In addition, these pressure gauges have heavy duty seals that protect the gauge mechanism from external line fluids.

The special construction of the Oteco pressure gauge makes it a suitable choice for a wide range of industrial applications, and they are available in salt water, sour gas, and standard models.

EXPERIENCE... INTEGRITY... RESULTS! Rick Russell: TX License #11287 AUCTIONS... PRIVATE SALES... APPRAISALS REV 10-4-17 CANNON SALES, INC. AUCTION WEDNESDAY, OCTOBER 25, 2017 9 AM LOCAL TIME MCM ELEGANTE ODESSA, TX MENTION CANNON SALES AUCTION WHEN MAKING RESERVATIONS FOR A DISCOUNTED RATE CONTACT: RICK RUSSELL 940-841-3428 OR JESS HAWKINS 210-273-3761 INCLUDING: (2) CABOT 750 DRILLING RIGS / MASTS & SUBSTRUCTURES / TRUCKS / TRAILERS / WELL SERVICE EQUIPMENT / FRAC TANKS / POWER SWIVELS / PUMPS 2003 MACK PUMP/KILL TRUCK -- YD 1 CABOT RIG NO. 16 -- YD 3 EVCO 2.5 POWER SWIVELS -- YD 1 ROUND BOTTOM MUD TANKS -- YD 1 WELL SERVICE PUMPS -- YD 4 CABOT RIG NO. 15 -- YD 3 CONTACT: Rick Russell @ 940-841-3428 OR Jess Hawkins @ 210-273-3761 PHONE (830) 336-3983 FAX (830) 336-3984 CORPORATE HEADQUARTERS ADDRESS: P.O. BOX 4038 BERGHEIM, TEXAS 78004

Corporate Headquarters P.O. Box 4038 Bergheim, TX 78004 (830) 336-3983 Office (830) 336-3984 Fax DATE & TIME October 25, 2017 9:00 am Local Time AUCTION LOCATION MCM Elegante 5200 E. University Blvd. Odessa, TX 79762 432-368-5885 AUCTION TEAM HEADQUARTERS MCM Elegante 5200 E. University Blvd. Odessa, TX 79762 ALTERNATE HOTELS MCM Grande Fun Dome 6201 Interstate 20E Business Odessa, TX 79762 432-362-2311 Courtyard by Marriott 7241 Tres Hermanas Blvd. Odessa, TX 79765 432-614-4696 AIRPORT Midland International Airport 9506 La Force Blvd. Midland, TX 79706 TERMS OF SALE All bidders must register and provide proper identification. All purchases must be paid IN FULL on sale date before equipment will be released. Acceptable forms of payment include Cash, Cashier s Checks, Wire Transfer or Personal/Company Check Accompanied by BANK LETTER OF GUARANTEE. No drafts will be accepted. A 2.5% Administrative Fee will be charged on ALL PURCHASES. All printed information regarding this sale is merely a guide, subject to change, and neither the Auction Company, Sellers, nor Publishers shall be liable for any errors in this brochure. All items will be sold AS IS, WHERE IS, WITH ALL FAULTS and without guarantee or warranty of any kind either expressed or implied. TAX NOTICE Purchasers who are tax exempt MUST provide a copy of their SALES TAX PERMIT at the time of BIDDER REGISTRATION. The company Federal Identification Number, or for a proprietorship, the purchaser s social security number will also be required at registration. TERMS OF CHECKOUT Any lots or partial lots that are not claimed by the end of the checkout period will be considered abandoned and will be re-claimed and sold for storage costs at Cannon Sales, Inc. s discretion. Neither the Auctioneer, Seller, nor yard owner is in any way responsible for any injury, loss or damage during or after the checkout period. YARD No. 1 ODESSA, TX Directions: Traveling West on I-20 Exit Airport /FM 1788 (Exit 126). At Intersection Turn Right/North on 1788. Go.5 Miles and Turn Left/West on Business I-20. Stay on Service Road and Travel 3.0 Miles. Turn Right on South County Road 1309, One Block on Left. Cannon Sales, Inc. 3720 S. CR. 1309 Odessa, TX 79765 2 CABOT TELESCOPING SUBSTRUCTURE -- YD 1 Preview for Yard #1 beginning: Monday October 16, 2017 (8am to 5pm) Monday Thru Friday; Including Weekends. Checkout for Yard #1 Thru: Friday, November 10, 2017 (8am to 5pm) Monday Thru Friday; Weekends By Appointment Only. Contact: Mike Marques @ 432-258-9631 Office Phone: 432-563-3900 Fax: 432-563-0040 (NOTE: BUYERS WILL BE RESPONSIBLE FOR ALL LOADOUT & TRUCKING) (SMALL FORKLIFT AVAILABLE FOR $75/HOUR) DRECO 18 H SLINGSHOT SUB -- YD 1 MASTS/ SUBSTRUCTURES: CABOT MAST/SUB PACKAGE: CABOT 127 H x 715,000# SHL Telescoping Mast, Standpipe, Hyd. Lines, 4 Rotary Hose, 1-1/4 Line w/ Spool, MCKISSICK 350-Ton Block/Hook Combo, Mast Stand, Lights w/ 3-Axle Derrick Dolly, 10:00-20 Tires, Steel Disc CABOT 17 H Telescoping Substructure w/ Rotary Beams, NATIONAL C-275 Rotary Table, EB Deadline Anchor, (2) Hyd. Winches, Safety Rails & Stairways 12 H x 10 W x 40 L Mud Boat w/ 4 Mud Line, Skidded Hyd. Power Unit p/b DETROIT 3-71 Diesel Eng, 100-Gal Hyd. Tank, Mtd. On 5 W x 12 L Skid DRECO SLINGSHOT MAST/ SUB PACKAGE: DRECO 133 H x 15 W x 357,000# SHL Cantilever Mast, Crown Block Assembly w/ (5) 36 Sheaves, 42 Fastline Sheave f/ 1-1/8 Line, 4 Standpipe, Crown Safety Platform, Racking Board DRECO SLINGSHOT 18 H x 50 L x 357,000# Rotary Capacity Substructure w/ LANDTECH Winches, Safety Rails, Mud Line, Stairways Hyd. Power Unit p/b 25 HP Elec. Motor, CUTLER Hammer Control Panel, Hoses w/ Lift Eyes LEE C. MOORE Type 136 H x 18 6 W Cantilever Mast, 530,000# SHL Pin-Type w/ Crown Block Assembly f/ 1-1/4 Line, Crown Safety Platform, Racking Board, Tong Counterweights, Mast Stand, 4 Standpipe (NOTE: Rebuilt in 2008 Top Drive Compatible) w/ MCKISSICK 250-Ton Block w/ (5) 40 Sheaves f/ 1-1/4 Line, DG225 Hook & 1-1/4 Drilling Line Box-On-Box 17 H x 22 W x 48 L Substructure, 10 H Main Sub w/ 7 H Pony Subs, HERCULES Deadline Anchor, Rotary Beams, Stairways, Safety Rails 36 H x 5 W x 50 L 2-Section Catwalk w/ Steel Deck DRECO 133 H MAST W/DRECO SLINGSHOT SUB -- YD 1 LEE C. MOORE 136 H X 530,000# -- YD 1 LEE C. MOORE 136 H X 600,000# -- YD 1 DRECO 131 H X 450,000# -- YD 1

LEE C. MOORE 136 H x 21 W Cantilever Mast, 600,000# SHL Pin-Type w/ Crown Block Assembly f/ 1-1/4 Line, Crown Safety Platform, Racking Board, Tong Counterweights, Mast Stand, 4 Standpipe (NOTE: Rebuilt In 2013 Top Drive Compatible) w/ RG PETRO 250-Ton Block/Hook Combo w/ (5) 36 Sheaves f/ 1-1/4 Line & 1-1/4 Drilling Line Box-On-Box 16 H x 26 6 W x 48 L Substructure, 10 H Main Sub w/ 6 H Pony Sub, NATIONAL TYPE D Deadline Anchor, Rotary Beams, Stairways, Safety Rails 42 H x 5 W x 54 L 2-Section Catwalk w/ Steel Deck DRECO 131 H x 18 6 W Cantilever Mast, 450,000# SHL Pin- Type w/ Crown Block Assembly f/ 1-1/4 Line, Crown Safety Platform, Racking Board, Tong Counterweights, Mast Stand, 4 Standpipe (NOTE: Rebuilt in 2007 Top Drive Compatible) w/ MCKISSICK 250-Ton Block w/ (5) 40 Sheaves, Raising Line Bicket & 1-1/4 Drilling Line Box-On-Box 19 H x 25 W x 52 L Substructure, 8 8 H Main Sub w/ 10 6 H Pony Subs, NATIONAL TYPE D Deadline Anchor, Rotary Beams, Stairways, Safety Rails 46 H x 5 8 W x 50 L 2-Section Catwalk w/ Steel Deck TRIPLEX MUD PUMPS: MAXUM M-1000 Triplex Mud Pump, 1000 HP, Fluid Modules w/ Quick-Change Caps, 3 Shear Relief Valve, Rod Cooling Pump, OTECO Mud Gauge, Belt Drive Assembly, MCM 5 x6 Charging Pump, 5000# Pulsation Dampener, p/b CAT 398 Diesel Eng, Radiator, Gauges, Air Clutch, Master Skidded (2) FES MZ-9 Triplex Mud Pumps, 1000 HP, Fluid Modules w/ Quick-Change Caps, 3 Shear Relief Valve, Rod Cooling Pump, OTECO Mud Gauge, Belt Drive Assembly, MCM 5 x6 Charging Pump, 5000# Pulsation Dampener, p/b CAT 398 Diesel Eng, Radiator, Gauges, Air Clutch, Master Skidded RIG HOUSES: W&W RIG COMPONENTS 9 9 W x 23 L Crimped Steel Round Top Drillers House w/ 5 L Covered Porch Ext., Knowledge Box, Lockers, Parts Bins, Bench Storage, Skidded 9 10 W x 28 L Crimped Steel Round Top Drillers House w/ 5 L Covered Porch Ext., Knowledge Box, Lockers, Parts & Bins, Bench Storage, Skidded 7 8 W x 24 L Crimped Steel, Round Top Drillers House w/ 5 L Covered Porch Ext., Knowledge Box, Lockers, Parts Bins, Bench Storage, Skidded KOOMEY TYPE 80 Model 160-11S, 5-Station Closing Unit, w/ (16) Bottles, Triplex Pump, p/b Elec. Motor, (2) Air Pumps, Mtd. On Closing Unit/Junk Box Skid w/ 8 W x 15 L Junk Box 9 H x 8 W x 17 L Round Top Drillers House w/ 4 L Covered Porch Ext., Knowledge Box, Bench Storage, (4) Lockers, Storage Shelves, Heater, Lights, w/ Lift Eyes 60 Dia. Folding Degasser, Mtd. On Adj. Height Skid WATER TRANSFER PUMPS: (2) CORNELL 10R Water Transfer Pumps p/b DAEWOOD 6-Cyl. Diesel Engs., Mtd. On T/A Bumper Pull Trailers POWER SWIVELS: (2) EVCO 2.5, 85-Ton Power Swivels p/b CUMMINS 4-Cyl., 3.9 Liter Diesel Eng., w/ Elec. Starter, Radiator, Gauges, Hyd. Hose Reels, Remoted Mtd. On T/A Bumper Pull Trailer w/ Pintle Hitch (2) BOWEN 2.5, 85-Ton Power Swivel p/b JOHN DEERE 4-Cyl. Diesel Eng., w/ Elec. Starter, Radiator, Gauges, Hyd. Hose Reels, Remoted Mtd. On T/A Bumper Pull Trailer w/ Pintle Hitch LIGHT TOWER/ GENERATORS/ENGINES: (10) ALLMAND Night-Lite Pro Light Tower/Generators, Mtd. On S/A Trailers (3) CAT RP261 Light Tower/Generators, Mtd. On S/A Trailers (4) TAHOE TI-1000 LX1 Generators, Mtd. On T/A Trailers CAT 3512-A Diesel Eng. TRAVEL TRAILERS: (3) 2008 SANDPIPER By FOREST RIVER 32 L 5th Wheel Recreational Travel Trailers, Ea. w/ (3) Slide Outs PUMP/KILL TRUCK: 2003 MACK CL733 ELITE CL T/A Pump/Kill Truck Tractor, p/b CUMMINS ISX 565, 565 HP Diesel Eng., Maxitorque 18-Spd. Extended Range Trans, CHELSEA P.T.O., Factory Dbl. Frame, 259 WB, 44,000# Rear Axles, 20,000# Front Axle, MACK CAMEL BACK Spring Suspension, GEOQUIP ROUGH RIDER 10,000# Triplex Pump w/ In-Cab Controls, MISSION MAGNUM 4 x3 x13 Centrifugal Charging Pump, 425/65R22.5 Front 11R24.5 Rear Tires, Alum Disc., 176,729 Miles (NOTE: One Owner Truck) TRUCKS: 2003 MACK CH613 T/A Winch Truck Tractor, p/b MACK E7-427 Diesel Eng., EATON FULLER 9-Spd. Trans, CHELSEA P.T.O., 205 WB, 38,000# Rear Axles, 12,000# Front Axle, MACK CAMEL BACK Spring Suspension, SKELETON Oilfield Bed, w/ Headache Rack, TULSA 34 Winch, Frame Width Rolling Tailboard, 11R24.5 Front & Rear Tires, Steel Disc 2000 MACK CH613 T/A Oilfield Truck, p/b MACK E7, 355 HP Diesel Eng., EATON FULLER 9-Spd. Trans, CHELSEA P.T.O., 169 WB, 38,000# Rear Axles, 12,000# Front Axle, MACK CAMEL BACK Spring Suspension, Steel Oilfield Bed, w/ Headache Rack, TULSA 34 Winch, 14 L Gin Poles, Full Rolling Tailboard, 11R24.5 Front, 11R22.5 Rear Tires, Steel Disc 1994 KENWORTH T-800 T/A Sleeper Truck Tractor, p/b CAT 3406B Diesel Eng., EATON FULLER 10-Spd. Trans, 234 WB, 38,000# Rear Axles, 12,000 Front Axle, 8-Bag Air Ride Suspension, 56 Walk-In Sleeper, 11R22.5 Front, 295/75R22.5 Rear Tires 1981 PETERBILT T/A Winch Truck Tractor, p/b CUMMINS 400 Diesel Eng., FULLER ROAD RANGER RT-1215 Trans, P.T.O., 212 WB, 40,000# Rear Axles, 20,000# Front Axle, HENDRIXSON Extended Leaf Spring Suspension, SKELETON Bed w/ Headache Rack, TULSA 70 Winch, Heavy Duty Front Bumper, Frame Width Rolling Tailboard, 5th Wheel, 11R24.5 Front & Rear Tires, Steel Disc 1989 FREIGHTLINER T/A Truck Tractor, p/b CAT 10.5 Liter Diesel Eng., EATON FULLER 9-Spd. Trans, 172 WB, 38,000# Rear Axles, 12,000# Front Axle, Spring Suspension, MERRITT Aluminum Headache Rack, Sliding 5th Wheel, (2) 120-Gal Alum Fuel Tanks, 11R2.5 Front & Rear Tires, Steel Disc TRAILERS: 2009 DRAGON T/A 130-Bbl. Trans/Vac, Vacuum/Kill Trailer, Landing Gear, King Pin, Spring Suspension, 11R24.5 Tires, Steel Disc, (NOTE: Very Limited Use Since New Liner Installed) 2006 DRAGON T/A 130-Bbl. Vacuum Trailer, Landing Gear, King Pin, Spring Suspension, 11R24.5 Tires, Steel Disc 2005 DRAGON T/A 130-Bbl. Vacuum Trailer, Landing Gear, King Pin, Spring Suspension, 11R24.5 Tires, Steel Disc 1968 LOADCRAFT T/A Drop Deck Oilfield Trailer, 8 W x 31 5 L Load Deck, w/ 8 W x 8 L Platform Neck, Rolling Tailboard, King Pin, Spring Suspension, 11R22.5 Tires, DAYTON 3 POWERED TRIPLEX PUMPS -- YD 1 W&W RIG COMPONENTS DRILLERS HOUSE -- YD 1 CORNELL WATER TRANSFER PUMPS -- YD 1 ALLMAND MAXI-LITES -- YD 1 CAT 3512 -- YD 1 BOWEN POWER SWIVELS -- YD 1

1981 TECHSTEEL T/A Forklift/Equipment Lowboy, 8 W x 24 L w/ 4 L Dovetail, 10 L Neck, Landing Gear, King Pin, Spring Suspension, 10:00R15 Tires, DAYTON 1986 UTILITY Sliding T/A Float, 8 W x 44 L Load Deck, Landing Gear, King Pin, Spring Suspension, 11R24.5 Tires, Steel Disc 1986 HOBBS Sliding T/A Float, 8 W x 42 L Load Deck, Landing Gear, King Pin, Spring Suspension, 11R24.5 Tires, Alum. Disc 1981 LUFKIN T/A Float, 8 W x 40 L Load Deck, Landing Gear, King Pin, Spring Suspension, 11R24.5 Tires, Steel Disc 1973 LUFKIN MODEL THT-60SLST Sliding T/A Float, 8 W x 40 L Load Deck, Rolling Tailboard, Folding Landing Gear, Inverted 5th Wheel, Spring Suspension, 11R24.5 Tires, Steel Disc ACID TANKS: (6) W&W RIG COMPONENTS and J&J STEEL 10 6 Dia x 32 L Acid Tanks w/ 8 Manifolds, Skidded ROUND BOTTOM S/A MUD/ FRAC TANKS: (4) SOUTHERN FRAC S/A Round Bottom Mud/Frac Tanks, (2) 2012 & (2) 2011 w/ Dual Manifolds, Front Mtd. Stairways & Safety Rails, 11-22.5 Tires, Steel Disc SKIDDED FRAC TANKS: (24) W&W RIG COMPONENTS, J&J STEEL & PHILLIPS FAB, 10 6 W x 32 L, 500-Bbl. Skidded Frac Tank w/ Front Mtd. Stairways, 8 Manifolds S/A FRAC TANKS: (10) DRAGON & WICHITA S/A 500-Bbl. Frac Tanks w/ Front Mtd. Stairways, 8 Manifolds, 11-22.5 Tires, Steel Disc MISC.: (2) RUFNECK RN45 Winches w/ Headache Racks, (1) TULSA 34 Winch w/ Headache Rack, Full Rolling Tailboard, (6) Well Service Base Beams, (8) Rig Mats, Drill Pipe Elevators, (5) Unused Kelly Drive Bushings YARD No. 2 HOBBS, NM Directions: From the Intersection of Hwy. 208 (North Truck Bypass) & Hwy 18 North, Travel 2 Miles North to Yard on Right (Just Past Sleep Inn & Suites). 4658 N. Lovington Hwy Hobbs, NM 88240 Preview for Yard #2 beginning: Monday, October 16, 2017 (8am to 5pm) Monday Thru Friday; Including Weekends. Checkout for Yard #2 Thru: Friday, November 10, 2017 (8am to 5pm) Monday Thru Friday; Weekends By Appointment Only. Contact: James Bradley @ 325-668-4059 OR Orlando Salaiz @ 575-441-0482 (NOTE: BUYERS WILL BE RESPONSIBLE FOR ALL LOADOUT & TRUCKING) SKIDDED FRAC TANKS: (14) W&W RIG COMPONENTS, J&J STEEL and PHILLIPS FAB., 10 6 W x 32 L, 500-Bbl. Skidded Frac Tanks, w/ Front Mtd. Stairways, 8 Manifolds S/A FRAC TANKS: (20) DRAGON & WICHITA S/A 500-Bbl. Frac Tanks w/ Front Mtd. Stairways, 8 Manifolds, 11-22.5 Tires, Steel Disc MISC. TANKS: (3) 275-Bbl. ½ Pits, Single Compartment, Skidded (1) 300-Bbl. ½ Pit w/ Single Compartment, Gas Buster, Skidded 150-Bbl. 2-Compartment Reverse Circulating Tank, Skidded YARD No. 3 PLEASANTON, TX Directions: From San Antonio Travel South on I-37 from the Intersection of Loop 410 & I-37 for 23 Miles to Exit 109. Turn Right (West) on Hwy 97 for 2.8 Miles and Veer Right onto Spur 242/ Bensdale. Travel 1.3 Miles to Water Well Services Inc. Yard on Left. Water Well Services Inc. 1209 Bensdale Rd. Pleasanton, TX 78064 Preview for Yard #3 beginning: Monday, October 16, 2017 (8am to 5pm) Monday Thru Friday; Weekends By Appointment Only. Checkout for Yard #3 Thru: Friday, November 10, 2017 (8am to 5pm) Monday Thru Friday; Weekends By Appointment Only. Contact: Must Check in at Front Office Before Entering Yard Office Phone: 830-281-2400 Fax: 830-569-8028 (NOTE: BUYERS WILL BE RESPONSIBLE FOR ALL LOADOUT & TRUCKING/ FORKLIFT AVAILABLE) RIG NO. 16: CABOT 750 Carrier Mtd. Drilling Unit, 750 H.P., p/b (2) DETROIT SERIES 60 Diesel Engs., w/ ALLISON 5860 Trans, PARKERSBURG 22 Brake, 112 H x 300,000# 4-Leg Mast, Hyd. Raised & Scoped, MCKISSICK 150-Ton Block/Hook, Mtd. On 6-Axle Carrier SUBSTRUCTURE: CABOT 15 H, Telescoping Substructure, 12 H Clear Height From Ground To Rotary Beams, IDECO 275 Rotary Table PUMPS: (2) BOMCO F-1000 Triplexes p/b CAT D-399 s GENERATOR HOUSE: (2) CAT SR4, 354 KW Gen Sets p/b CAT C-15 s MUD SYSTEM: 2-Tank 630-Bbl. Mud System w/ (2) DERRICK FLC 503 Shale Shakers, Desander & Desilter, Degasser, Cent Pumps WELL CONTROL: HYDRIL GK 11 x 5M Annular, SHAFFER LWS 11 x 5M Dbl., KOOMEY 5-Station Closing Unit, 5000# Choke Manifold AUXILIARY EQUIPMENT: Driller s House, Toolpusher & Crew Quarters, 500-Bbl. Water Tank, Pipe & Kelly Spinners, Tongs, Elevators, Slips, Parts/Change House, 7,700-Gal Fuel Tank, Wireline Machine and Misc. RIG NO. 15: CABOT 750 Carrier Mtd. Drilling Unit, 750 H.P., p/b (2) DETROIT SERIES 60 Diesel Engs, w/ ALLISON 5860 Trans, PARKERSBURG 22 Brake, 112 H x 300,000# 4-Leg Mast, Hyd. Raised & Scoped, MCKISSICK 150-Ton Block/Hook, Mtd. On 6-Axle Carrier SUBSTRUCTURE: CABOT 15 H, Telescoping Substructure, 12 H Clear Height From Ground to Rotary Beams, IDECO 275 Rotary Table PUMPS: (2) BOMCO F-1000 Triplexes p/b CAT 3508 s GENERATOR HOUSE: (2) CAT SR4, 275 KW Gen Sets, p/b CAT 3408 s MUD SYSTEM: 350-Bbl. Single Pit Mud System w/ Shale Shakers, Desander & Desilter, Degasser, Cent Pumps WELL CONTROL: HYDRIL GK 11 x 5M Annular, SHAFFER LWS 11 x 5M Dbl., 4-Station Closing Unit, 5000# Choke Manifold 4 FRAC TANKS -- YD 2 RIG NO. 15 GEN HOUSE -- YD 3 RIG NO. 16 MUD SYSTEM -- YD 3 RIG NO. 15 SUB & DRILLERS HOUSE -- YD 3 RIG NO. 16 B.O.P.s -- YD 3 F-1000 POWERED PUMPS -- YD 3

AUXILIARY EQUIPMENT: Driller s House, Toolpusher & Crew Quarters, 500-Bbl. Water Tank, Pipe & Kelly Spinners, Tongs, Elevators, Slips, Parts/Change House, 6700-Gal Fuel Tank, Wireline Machine and Misc. MISC. DRILLING EQUIPMENT: ELLIS WILLIAMS 15W600 Duplex Mud Pump, S/N: 107, p/b CAT D379 Diesel Eng., S/N: 68B3618, No Starter, Radiator, OTECO Pressure Relief Valve, Pulsation Dampener, Skidded EMSCO D-300 Duplex Mud Pump, p/b CUMMINS NTC 400, BC3, Diesel Eng., S/N: 60528897, No Starter, GODRIL 2 Shear Relief Valve, Hydril K-10-1500 Pulsation Dampener, Skidded TOOL PUSHER HOUSE: 11 W x 50 L x 9 H Round Top Steel Tool Pusher House, 1 Bedroom, 1 Bath, Living Area, Skidded FUEL TANK: 8 Dia. x 18 L Fuel Tank w/ 2 H x 4 W x 7 6 L, (4) Compartment Lubester, w/ (2) Elec. Charging Pumps, Junk Baskets, Skidded WATER TANK: 10 6 Dia. x 33 L Water Tank w/ 9 L Porch Ext., (2) MISSION MAGNUM Cent Pumps, p/b Elec. Motors, Skidded MISC.: GOULDS Booster Pump w/ Pressure Tank, Mtd. On 4 W x 4 L x 4 H Round Top Skid, Lift Eyes BREWSTER 6SX CG 200-Ton SWIVELS: SPLIT ROTARY MASTER BUSHINGS: 17-1/2 Split Master Bushings (2) Sets of 20-1/2 Split Master Bushings POWER WASHERS: (4) 4 W x 4 H x 4 L Pressure Washers, Elec. Powered Partial Camp Transformer, Mtd. On 4 W x 4 H x 4 L Covered Lifting Frame WORLD WIDE ELECTRIC CORP. Model XWWE60-12-404T, S/N: 8DOQ74DT, 60 HP Elec. Motor, Mtd. On 3 W x 5 6 L Skidded Lifting Frame 4 W x 6 L x 3 H (3) Compartment Water Tank, Lifting Eye, Skidded Hydraulic Test Unit p/b TECUMSA Eng., S/N: N/A 3 6 W x 5 L x 6 6 H Metal Paint Locker YARD No. 4 GIDDINGS, TX Directions: From Intersection of Hwy 290 and Hwy 77 in Giddings, TX, Travel East on Hwy 290 Approximately 4.3 Miles to County Road 237. Turn Right onto County Road 237 and Travel 1000 ft. to Key Yard Entrance. Key Energy Services 1074 CR 237 Giddings, TX 78942 Preview for Yard #4 beginning: Monday October 16, 2017 (8am to 5pm) By Appointment Only. Checkout for Yard #4 Thru: Friday, November 10, 2017 (8am to 5pm) By Appointment Only. Contact: Randall Westbrook @ 281-615-8221 (NOTE: BUYERS WILL BE RESPONSIBLE FOR ALL LOADOUT & TRUCKING) VACUUM TRUCK TRACTOR: 2005 MACK CV713 GRANITE T/A Vacuum Truck Tractor, p/b MACK 6-Cyl. Diesel Eng., 427 HP, ALLISON Auto Trans, 210 WB, 12,000# Front Axle, 38,000# Rear Axles, Air Ride Suspension, Vacuum Pump, 5th Wheel, 11R24.5 Tires, Steel Disc VACUUM TRAILERS: 2006 GAYLEAN EQUIPMENT T/A 150-Bbl. Vacuum Trailer, Side Mtd. Walkways & Safety Rails, Hose Trays, Landing Gear, King Pin, 11R24.5 Tires, Steel Disc 2010 JACK COUNTY TANK MANUFACTURING T/A 130-Bbl. Vacuum Trailer, Side Mtd. Walkways & Safety Rails, Hose Trays, Landing Gear, King Pin, 11R24.5 Tires, Steel Disc 2005 GAYLEAN EQUIPMENT T/A 130-Bbl. Vacuum Trailer, Side Mtd. Walkways, Safety Rails, Hose Trays, Landing Gear, King Pin, 11R24.5 Tires, Steel Disc 2003 DRAGON T/A 130-Bbl. Vacuum Trailer, Side Mtd. Walkways, Safety Rails, Hose Trays, Landing Gear, King Pin, 11R24.5 Tires, Steel Disc WELL SERVICE PUMPS: (2) ELLIS WILLIAMS TYPE MODEL W440 Triplex Pumps, p/b DETROIT SERIES 60 Diesel Eng, RALSTON Trans, Model HT750 DR, w/ DOUBLE LIFE Charging Pump, Diesel Tank, Skidded WELL SERVICE B.O.P.: GUIBERSON 7-1/16, 5000# Dbl. B.O.P. HYDRIL 7-1/16, 5000# Dbl. B.O.P. TUBING TONGS: FOSTER 58-93R 1-5/16 7 Closed Face Hyd. Tubing Tongs FOSTER 54-0Z Hyd. Tubing Tongs MAVERICK 58-93R Type Hyd. Tubing Tongs TUBING SPIDERS: (6) GUIBERSON T-60 Tubing Spiders MUD MIXING PIT: SHOPBUILT 35-Bbl. Mud Mixing Pit, p/b DETROIT 4-Cyl. Diesel Eng., w/ MISSION MAGNUM 4 x 3 x 13 Charging Pump, Mixing Hopper, Mtd. On 8 W x 20 L Skid VACUUM TRAILERS: DRAGON 8 W x 4 H x 37 L, 200-Bbl. Reverse Circulating Tank, w/ (2) Compartments, Side Mtd. Hardline Racks, Skidded SHOPBUILT 7 4 W x 4 H x 41 L, 200-Bbl. Reverse Circulating Tank, w/ (2) Compartment, Skidded SHOPBUILT 8 W x 5 6 H x 27 L, 200-Bbl. Reverse Circulating Tank, w/ (2) Compartments, Folding Walkways, Hardline, Racks, Skidded WELL SERVICE CREW TRAILER: Aluminum 6 8 W x 12 L T/A Well Service Crew Trailer, Bumper Pull Hitch, Lockers w/ Benches OPEN TOP WATER TANK: SHOPBUILT 8 W x 4 H x 20 8 L Open Top Water Tank, Skidded 5 200-BBL. REVERSE CIRCULATING TANK -- YD 4 HYDRIL 7-1/16 5000# -- YD 4 VACUUM TRAILERS -- YD 4 TRUCKS -- YD 1 (24) SKIDDED FRAC TANKS -- YD 1 (3) 2008 SANDPIPER TRAVEL TRAILERS -- YD 1

ALLMAND NIGHT-LITE PRO -- YD 1 (3) OF (10) FRAC TANKS -- YD 1 MUD MIXING PIT -- YD 4 SKIDDED FRAC TANKS -- YD 2 RICK RUSSELL 940-841-3428 rrussell@cannonsalesinc.com JESS HAWKINS 210-273-3761 jhawkins@cannonsalesinc.com AUCTIONEER: Rich Jenkins, TX License #17451 RIG NO. 15 -- YD 3 AUCTIONS PRIVATE SALES APPRAISALS P. O. Box 4038 Bergheim, Texas 78004 2003 MACK WINCH TRUCK -- YD 1 DRILLER HOUSES -- YD 1 First Class Presort US Postage PAID Permit #1234 San Antonio TX OCTOBER 2017 Sun Mon Tues Wed Thur Fri Sat 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 AUCTION ODESSA, TX OCTOBER 25, 2017 9 A.M. MCM ELEGANTE 2009 DRAGON TRANS/VAC TRAILER -- YD 1 RIG NO. 16 CABOT 750 -- YD 3 LIVE DIGITAL IMAGE AUCTION WITH ONLINE BIDDING! The Cannon Sales Team has the Smoker Fired Up! Come by Yard No. 1 Tuesday, October 24, 2017 for Plenty of Good Ole Country Cookin! RIG NO. 15 B.O.P.s -- YD 3 19 H BOX-ON-BOX SUB -- YD 1 DRAGON REVERSE CIRCULATING TANK -- YD 4 MUD PUMPS -- YD 3 130-BBL. VACUUM TRAILERS -- YD 1

Backed with the professional workforce, we offer a wide range of Mud Pump Pressure Gauge. These products are specially designed using current techniques. The range of our product is made-up using finest quality materials, which are procured from expert and reputed sources of the industry. We offer our exclusive range afterread more...

O’Drill MCM manufactures Demco & Oteco Style 5K Mud Gate Valves in 2”, 3”, 4” and 5” sizes. They are completely interchangeable, built with unsurpassed quality, and are available in stock at competitive prices.

Rowan Rig 84 WH1612-206 Triplex Pump Read this manual completely before ordering spare parts for this pump

Caution Pumps are shipped dry. Fill with proper lubricant before operating. See Maintenance Manual.

6500 Brittmoore, Houston, Texas 77041 PO Box 41343, Houston, Texas 77241-1343 832-872-6500 1-866-946-5333 FAX: 832-782-6627 www.letourneau-inc.com/drilling pumps@let-tech.com Table of Contents

Drawing Number Revision Level Unitization WH1612-206 1 Bareshaft Pump Assembly D186006 2 Crankshaft Assembly D186200 1 Pinion Shaft Assembly D186300 1 Crosshead Assembly D186400 7 Fluid End Assembly D105410 3 Frame Assembly D186100 3 Lube Oil Schematic D105362 6IntroductionThis manual is intended to be a valuable service tool. Before placing the mud pump in service,study this manual thoroughly. Your familiarity with the contents will help to complete anyservice work quickly and correctly.Qualified personnel should immediately check all equipment shipped. Pay particular attention tothose parts that were unprotected in shipment and susceptible to damage. Inspect all surfaces andimmediately correct any damage prior to installing the equipment. Small, separately packeditems should be inspected for damage and missing parts. After inspection, these items should besafely repacked until needed.Serial NumberModel: WH1612

Ordering InformationWhen ordering parts for a machine, be sure to furnish both the model and serial number of thepump.Please provide the following information: ƒ the name and number of the part, ƒ the number of the assembly drawing where the part is listed, ƒ the quantity of parts required, ƒ complete shipping instructions including destination and carriers.We strive to give the best possible service to you, our customer. Should you encounter somedifficulty, a clear statement of facts will enable us to analyze the problem and make a helpfulrecommendation about parts and servicing.Contact: partsales@letourneautechnologies.com, or partsales@let-tech.com

For the sake of clarification of terminology in service work or parts ordering, use the diagram provided below to differentiate between RIGHT, LEFT, FRONT, and REAR of the pump.Parts list for :WH1612-206

Used drilling rigs for sale DRILLING RIGSOur database contains thousands of used drilling rigs for sale, whichare presented and continuously updated online. FinancingAvailable — Click Here for Credit Application by fax or phone , or Click on the logo foronline credit application: Contact Us | Drilling rigs forsale| Rig of the Month | TheBargain Zone | Retrofit and Refurbish | Our Special Pages Nederlands Espa ol Deutsch Most data updated on 04/25/05 ! Choose from the following categories: For an extensive listing of rigs for sale, use the links in this table. This list contains the hundreds of rigs that Sun has available throughout the world. They may be viewed by the manufacturer and model of the rig and they are in year sequence. This is the most extensive list of used rigs that exist anywhere. For special features, scroll down on this page. MUD ROTARY RIGS / PULLING UNITS, SWAB RIGS AUGER RIGS TOP HEAD DRIVE RIGS TOPHEAD RIGS WITH PHOTOS CAISSON, KELLY AUGER AND CRANE ATTACHMENTS CORE DRILLS CABLE TOOL RIGS MUD PUMPS MUD PUMP SPECIALS DIRECTIONAL DRILLS / RAISE DRILLS COMPRESSORS BOOSTERS TRUCKS HAMMERS AND BITS DRILL PIPE OILFIELD COMPONENTS MINING EQUIPMENT RIGOF THE MONTH Check out this linkfor our special offers updated daily, so keep checking Gardner Denver/Mayhew 2500 (Ref#13935) Kremco 600 (Ref#13239) Sub Sea Cameron BOP Ideco Rambler Rig Package Skytop 4242 Workover Rig (Ref#13970) Skytop Brewster Scorpion (Ref#10615) Core Drilling EquipmentPackage (#6519) (5) Ideco H37 rigs (Ref#13894) Rig Components Tesco Top Drive Rig (13814) TescoTop Drive Rig (13815) CompanyFor Sale (Ref#12670) GardnerDenver WM40 (Ref#13773) GardnerDenver 1500 (Ref#13774) GardnerDenver 2000 (Ref#13770) Failing2500 (Ref#13767) GardnerDenver 2000 (Ref#13741) Ingersoll Rand DM45 (Ref#3258) Driltech D40K (Ref#13389) JOY WB12BOOSTER (Ref#13763) INGERSOLL RAND RD20 (Ref#13887) Ingersoll Rand T4 (Ref#11237b) Ingersoll Rand RD20 (Ref#1729) SkytopWorkover Rig (Ref#13583) HopperGTA Workover Rig (Ref#13746) B.D.W.1350-M (Ref#13675) SkytopBrewster Drilling Rig (Ref#12601) Longyear44 (Ref#13452) BrewsterN4 (Ref#12644) MIDWAY 1000D Rotary Drill Rig (Ref#11870) NEW RIGS SUN30C (1000 HP) TRUCK-MOUNTED DRILLING RIG New Workover Rigs (SUN150 — SUN1000) SUNS20 Drilling Rig (Similar to Cooper) More Features: TheBargain Zone Clickhere for the rigs with the ABSOLUTELY LOWEST prices we have Earthdrill, Ingersoll Rand TH60, 1978 GMCCabover Truck, Ingersoll Rand T4, Koehring Crane Attachment, Atlas Copco XRVS Shallow Water Well Drilling Rigs Capacity: 1000′ deep MACHINES DE FORAGE DE PUITS D EAU New Triplex Mud Pumps Wanted!!! Your surplus drill rigs or relatedcomponents. Sun offers this equipment on the internet and to thousands ofpotential buyers on its database network. S un Machinery offers a variety ofservices including the largest listings of used rigs and rebuilding,retrofitting, manufacturing new rigs and the shipment of rigs to anywhere in the world Sun’s retrofitting and refurbishingservice. Sun Machinery does more than «just» buying andselling drilling rigs. Can’t find a rig that does exactly what you want? Noproblem! Click here for more information . FinancingAvailable — Click Here for Credit Application by fax or phone , or Click on the logo foronline credit application: Nederlands Espa ol Deutsch Contact Sun Machinery Online Contact Us Please fill out the following information and press the SUBMIT button. Don’tforget to give us either a telephone number, a fax or an email address so thatwe can get back to you. contact name company (Ref#13935) | Kremco 600 (Ref#13239) | Sub Sea Cameron BOP | Ideco Rambler Rig Package | Skytop 4242 Workover Rig (Ref#13970) | Skytop Brewster Scorpion (Ref#10615) | Core Drilling Equipment Package | Ingersoll Rand DM45 (Ref#3258) | (5) Ideco H37 rigs (Ref#13894) | INGERSOLL RAND RD20 (Ref#13887) | Driltech D40K (Ref#13389) | Rig components | Tesco Top Drive Rig (13814) | Tesco Top Drive Rig (13815) | Company for Sale (Ref#12670) | Gardner Denver WM40 (Ref#13773) | Gardner Denver 1500 (Ref#13774) | Gardner Denver 2000 (Ref#13770) | Failing 2500 (Ref#13767) | Joy WB12 Booster (Ref#13763) | Skytop Workover Rig (Ref#13583) | Hopper GTA Workover Rig (Ref#13746) | GardnerDenver 2000 (Ref#13741) | B.D.W.1350-M (Ref#13675) | | Longyear 44 (Ref#13046a) | Ingersoll Rand T4(Ref#11237b) | BrewsterN4 (Ref#12644) | GardnerDenver 3000 (Ref#12601) | Ingersoll Rand RD20(Ref#1729) | Midway 1000D Rotary Drill Rig (Ref#11870) Click photos to enlarge — To return tothis page use your «back» button on your browser. GARDNERDENVER/MAYHEW 2500 (Ref#13935) Trailermounted, split drum with swabbing line on front of rig w/2500 of 5/8 swabline, 51 derrick, 38 x 4-1/2 kelly bar with 4 kelly swivel, 25 x3 kelly bar and swivel, (2) ses of 2-7/8 elevators, left side and rightside BJ tongs with 3 diffeent size sets of jaws fits up to 7-1/2 casing, (4)5 drill collars, 7 subs for drill pipe, Gardner Denver FXD172 mud pump,weight indicator, KATO AC generator 50-60 Hz/ 3 phase or single phase w/ Kamac14 120/140 volt butane engine, 1000 of 2-7/8 drill pipe Price : $75,000 KREMCO600 (Ref#13239) Manufactured1990 (never used), double drum, water brake, 96 x 225,000# mast, 8V92TDetroit diesel engine, Allison transmission, 12 wide 2 axle trailer, 8 tiresacross axles, no block, no line, uses 7/8 and 9/16 , new racking board, newtubing board, new water brake, work floor, set of tubing tongs, set of air slips Price : $435,000 SUBSEA BOP STACK AND VARCO TOP HEAD DRIVE TDS-4H (Ref#14006) CAMERONTYPE U BOP DESCRIPTION QTY TYPE MANUFACTURER BOP Stack 1 18 BOP ( Type U Double) 2 U Cameron Choke valves (3 1/8 ) 4 Long Body Cameron Kill Valves ( 3 1/16 ) 4 Long Body Cameron Choke and kill Pipe work 1 ea Cameron No.27 BOP Clamps 3 Cameron BOP Frame 1 Lower Marine Riser Package 1 Upper Annular 1 Wedge cover Shaffer Lower Annular 1 Wedge cover Shaffer LMRP (Hydraulic) Connector 1 Model 70 collet Cameron Test Stump 10K LMRP coflex hose (12 ft long) 2 Yellow POD receptacle 1 Blue POD receptacle 1 Subsea Accumulator bottle 16 10 gals Koomey No. 27 BOP Clamps 1 No. 27 Cameron Mini Collet for C & K connector 2 LMRP Frame Yellow Hose bundle with Pod connector 1 Stewart & Stevenson Blue Hose Bundle with Pod connector 1 Stewart & Stevenson Ram blocks 15 Cameron Collet Connector Cameron 1 H4 Connector 1 Price: $225,000 VARCOTop Drive Type TDS-4H complete as listed below Manufactured 1992 TDSHP unit 1 Gooseneck for service loop 1 Rack back system (RBS) Price: $300,000 PACKAGE PRICE: $500,000 IDECORAMBLER RIGS (Ref#12198) IdecoRambler Truck Mounted BIR 350 HP (Ref#14002a) Clickhere for inventory and photo IdecoRambler Truck Mounted Dir. 750 HP (Ref#14002b) Clickhere for inventory and photo IdecoRambler Truck Mounted 550 HP (Ref#14002c) Clickhere for inventory and photo IdecoRambler Truck Mounted 250 HP (Ref#14002d) Clickhere for inventory and photo Pricefor package: $2,750,000 SKYTOP4242 WORKOVER RIG (Ref#13970) doubledrum, upgraded 1991, Detroit 671 engine Price : $145,000 SKYTOPBREWSTER SCORPION (Ref#10615) Manufactured1972, 3 axle single/double pulling unit, single man cab, powered by Detroit 6C71diesel engine (200 hours since rebuild), 13 speed transmission, 50ton Skytop blocks, work platform, hydraulic fuel tanks, single drum drawworks125,000#, powered by 6V71 Detroit diesel engine (200 hours since top endrebuild), 5 speed transmission, grooved for 7/8 line, 69 x 125,000# hydraulically raised kickback mast, 3-stage hydraulic raising ram(repacked), hydraulic winch Price $110,000 COREDRILLING EQUIPMENT PACKAGE (Ref#6519) (1)SPRAGUE & HENWOOD 142-C truck mounted, 30 derrick, automatic chuck, 353 Detroit engine, Bean435 pump with 4-speed transmission, working platform, 25 6 long x 12 6 high, mounted on 1986 Ford F700, gas engine in truck, manufactured late1980 s, low use (1)SPRAGUE & HENWOOD 142-Ctruck mounted, 30 derrick, automatic chuck, 353 Detroit engine, Beam 435 pumpwith 4 speed transmission, working platform, 25 long x 12 high, mounted on1968 Chevrolet approx 38,000 miles, gas engine in truck (1)JOY 22HD truck mounted, 30 derrick, automatic chuck, 353 Detroit engine, Bean435 pump with 4-speed transmission, working platform, mounted on 1971 Ford 900truck, 42,000 miles (1)JOY 22HD truck mounted,30 derrick, automatic chuck, 353 Detroit engine, Beam 435 pump with 4 speedtransmission, working platform, 25 10 long x 12 high, mounted on 1976Ford F750 truck, 40,000 miles PumpingUnits : (2)skid mounted pumping units (1)skid mounted Beam 435 with 4 speed transmission (no engine) (1)skid mounted Moyno pump (1)skid mounted Beam 435 with 4 cyl pump with 172 Ford engine (1)Gardner Denver high pressure pump with gasoline engine GroutingEquipment : (1)trailer mounted grouting plant (1)skid mounted grouting plant Wireline Rods 500 HQ (used) drill rods 500 NQ (newer) drill rods (2)10 (used) NQ core barrels (1-7/8 core sample) (2)15 (newer) NQ core barrels (1-7/8 core sample) 1000 AQ (used) drill rods (1)30 (used) NXM core barrel (1-1/8 core sample) (7)NXM (newer) diamond bits Conventional Rods 2000 AW (used) (5)Foot clamps (5)Longyear water swivels (3)S&H water swivels (heavy duty) (2)Joy 22 drawworks with hydraulic (rebuilt) (2)Joy 22 drawworks with hydraulic (used) Assortment of new and used Joy and S&H spareparts PACKAGEPRICE : $225,000 INGERSOLLRAND DM45 (Ref#3258) Manufactured1983 Crawlermounted 900/350IR compressor (rebuilt 1989) CumminsKTA 1150 diesel engine (low hours) IR T5 Planetary top head dustcollector Rearcab, heat, a/c, hammeroiler 5rod auto loader 4-1/2″x 25′ Painted Cleancondition Price: $120,000 What a find! (5) Ideco H37 rigs (Ref#13894) Manufactured from 1975 — 1978 in Europe by SDS under Ideco license Double drum, drive-in 96′ x 212,000# Ideco mast 17-1/2″ Ideco rotary table 320 hp Roba 6 cylinder diesel engine (could be replaced with Cat 3406) Allison 6B10 transmission 10′ Ideco substructure 100 ton Ideco hook/block Price for entire package: $650,000 REDUCED: $550,000 Options: Price to refurbish: $50,000 each rig Price to transport to European seaport : $15,000 each rig These rigs were in use and are located at the original owner’s location, where there is a 60 man shop that could rework these rigs. INGERSOLL RAND RD20 (Ref#13887) Drilling capacity: 6,000′ Manufactured 1996, 8000 hours on rig 1050/350 IR air comressor (new with 2000 hours) Cummins QSK Electronic engine on deck (rebuilt with 2000 hours, new Turbo) Tophead rebuilt Newslow feed and main pump 110,000# pullback, 50′ hydraulically raised mast, handles Range II casing Singlerod loader Mounted on 4 axle Crane Carrier with L10 diesel engine 3hydraulic leveling jacks Split coolers, water injection pump, hammer oiler 2 motor spur gear head, 2700′ of 4-1/2″ x 30′ drill pipe Handling tools, table bushings One owner rig, currently drilling in the Northeast US Drilled60 wells in 2004 Price : $535,000 New on the Market HALLIBURTONHT-400 (Ref#13881) Triplex cement pump Two available, one with Cummins engine, one with Detroit Allison transmission, Cummins diesel engine, mounted onoilfield skid 10,000 — 15,000 psi Price: $150,000 DRILTECH D40K (Ref#13389) Manufactured 1989 — Retrofitted 1990 Crawler mounted 900/350 Sullair screw compressor 3406 Cat diesel engine 5 rod carousel 4-1/2″ x 25′ drill pipe Hammer oiler, water injection 1 winch, dust collector, operators cab 900 hours on engine New high pressure end on compressor «0» hours Good condition Price: $75,000 TESCOTOP DRIVE RIG (Ref#13814) Manufactured1999 Drillingcapacity: 3,000 Meters or 9,800 Feet Currentlydrilling Immediatelyavailable for sale 1. DRAW WORKS Tesco hydraulic single drum draw works. Lebus grooved for 25.4 mm / 1inch drill line. Equipped with 2 only 1.27 meter / 50 inch disk brakes c/w 2 calipers for working brake and 2 calipers for emergency stop. The hydraulic system is used as the dynamic brake. Hydraulic break-out and make-up is mounted in the derrick. 2. RIG POWER 2 only Series 2000 DDEC III Detroit Diesel — maximum continuous power 525 kW / 700 HP; maximum power 563 kW / 750 HP each. Each engine drives 6 Linde HPV 130 hydraulic pumps. Total combined rig power is 1,050 kW / 1,400 HP. 3. MAST Tesco 30.5 meter / 100 foot high free standing double telescopic 133,000 daN maximum static hookload w/ 8 lines Certified new build as per API 4H 4. SUBSTRUCTURE Tesco Swing Up 5.2 meters / 17 feet x 3.6 meter / 12 feet wide x 12.2 meter / 40 feet long KB to ground 5.4 meters / 17.7 feet; bottom of table beam to ground 4.6 meters / 15 feet Casing capacity 133,000 daN simultaneous with 66,500 daN setback 5. CROWN & BLOCK Tesco maximum static load 133,000 daN w/ 4 sheaves in split block 6. TRAVELING BLOCK & HOOK Tesco 133,000 daN / 200 ton split block 7. SWIVEL Tesco integrated swivel with top drive assembly 8. TOP DRIVE Tesco Model 200 HMI (200 ton) Maximum torque 27 kN / 20,000 ft-lb. maximum speed 190 rpm Includes all relative pipe handling and safety features 50.8 mm / 2 inch rotary hose 9. ROTARY TABLE TSM 44.45 cm / 17.5 inch opening. Maximum load 111,200 daN. 10. PUMP Continental Emsco F-800 triplex: 152.4 mm / 6 inch x 229 mm / 9 inch stroke Powered by Hagglund Hydraulic 560 kW / 750 HP motor Equipped with K10-3000 pulsation dampener Operating range: 0 spm to 140 spm Maximum allowables: (80% manufacturers specifications) 127 mm / 5 inch x 120 spm x 25,200 kPa / 3,700 psi 152 mm / 6 inch x 120 spm x 17,500 kPa / 2,500 psi 11. MUD SYSTEM 2 only tanks: 2.44 meter / 8 feet wide x 2.1 meter / 7 feet high x 6.1 meter / 20 feet long w/ 4 -compartments Active capacity 50 m3 / 420 barrel Trip tank 5.0 m3 / 40 barrel Pill tank 5.0 m3 / 40 barrel Hydraulic agitators Mixing room with 2 only Mission 5 x 6 centrifugal pumps @ 3,600 lpm powered by 22.5 kW / 30 HP electric motors 1 only Mission 5 x 6 centrifugal pre-charge pump @ 3,600 lpm powered 22.5 kW / 30 HP electric motors Harrisburg mixing hopper Derrick Flowline Cleaner shale shaker 12. WELL CONTROL SYSTEM ACCUMULATOR: Mainline Hydraulics 5 station closing unit; 336 liter / 90 gallon capacity; maximum pressure 21,000 kPa / 3,000 psi w/ master control located at accumulator CHOKE MANIFOLD: Hi Kalibre 21,000 kPa / 3,000 psi mounted upright in separate container Gut line 76.2 mm / 3 inch; 2 only 50.8 mm / 2 inch wing lines 1 only Willis 50.8 / 2 inch manual choke; 1 only Master Flo 50.5 / 2 inch hydraulic remote choke; 21,000 kPa 3,000 psi HCR valve; Hi Kalibre 34,470 kPa / 5,000 psi upper kelly cock; Hi Kalibre 34,470 kPa / 5,000 psi stabbing valve. MUD GAS SEPARATOR: 762 mm / 2.5 feet x 3.4 meter / 11 feet; 76.2 mm / 3 inch inlet; 203 mm / 4 inch outlet B.O.P s Annular 228.6 mm / 9 inch Townsend Spherical 21,000 kPa / 3,000 psi WP flanges Blind Ram 228.6 mm / 9 inch Townsend LWP 21,000 kPa / 3,000 psi WP studded Pipe Ram 228.6 mm / 9 inch Townsend LWP 21,000 kPa / 3,000 psi studded Spool 228.6 mm / 9 inch w/ 2 only 76 mm / 3 inch flanged outlets 21,000 kPa / 3,000 psi Certified August 2001 13. INSTRUMENTATION Weight indicator PLC controlled Totco Survey Tool — 177.8 mm / 7 inch Wireline drift indicator 14. TANKAGE 40 m3 / 250 barrel water tank 10,400 liter / 2,500 gallon fuel storage tank 15. LIGHT PLANT 350 kW Detroit Diesel series 60 (475 HP) 40 kW standby 16. EXTRA EQUIPMENT Spinner Hawk hydraulic pipe spinner 6YEARS OLD WELL MAINTAINED AND IN EXCELLENT MECHANICAL SHAPE PRICE :$5,100,000 REDUCEDPRICE; $4,900,000 TESCOTOP DRIVE RIG (Ref#13815) Manufactured1999 Drillingcapacity: 2 ,800 Meters or 9,200 Feet Currentlydrilling Immediatelyavailable for sale 1. DRAW WORKS Tesco hydraulic single drum draw works. Lebus grooved for 25.4 mm / 1inch drill line. Equipped with 2 only 1.27 meter / 50 inch disk brakes c/w 2 calipers for working brake and 2 calipers for emergency stop. The hydraulic system is used as the dynamic brake. Hydraulic break-out and make-up is mounted in the derrick. 2. RIG POWER 2 only — 12V92TA DDEC III Detroit Diesel — maximum continuous power 600 kW / 800 HP; maximum power 642 kW / 860 HP each. Each engine drives 6 Linde HPV 130 hydraulic pumps. Total combined rig power is 1,200 kW / 1,600 HP. 3. MAST Tesco 30.5 meter / 100 foot high free standing double telescopic 133,000 daN maximum static hookload w/ 8 lines Certified new build as per API 4H 4. SUBSTRUCTURE Tesco Swing Up 5.2 meters / 17 feet x 3.6 meter / 12 feet wide x 12.2 meter / 40 feet long KB to ground 5.4 meters / 17.7 feet; bottom of table beam to ground 4.6 meters / 15 feet Casing capacity 133,000 daN simultaneous with 66,500 daN setback 5. CROWN & BLOCK Tesco maximum static load 133,000 daN w/ 4 sheaves in split block 6. TRAVELING BLOCK & HOOK Tesco 133,000 daN / 200 ton split block 7. SWIVEL Tesco integrated swivel with top drive assembly 8. TOP DRIVE Tesco Model 200 HMI (200 ton) Maximum torque 27 kN / 20,000 ft-lb. maximum speed 190 rpm Includes all relative pipe handling and safety features 50.8 mm / 2 inch rotary hose 9. ROTARY TABLE TSM 44.45 cm / 17.5 inch opening. Maximum load 111,200 daN. 10. PUMP Continental Emsco F-800 triplex: 152.4 mm / 6 inch x 229 mm / 9 inch stroke Powered by Hagglund Hydraulic 560 kW / 750 HP motor Equipped with K10-3000 pulsation dampener Operating range: 0 spm to 140 spm Maximum allowables: (80% manufacturers specifications) 127 mm / 5 inch x 120 spm x 25,200 kPa / 3,700 psi 152 mm / 6 inch x 120 spm x 17,500 kPa / 2,500 psi 11. MUD SYSTEM 2 only tanks: 2.44 meter / 8 feet wide x 2.1 meter / 7 feet high x 6.1 meter / 20 feet long w/ 4 -compartments Active capacity 50 m3 / 420 barrel Trip tank 5.0 m3 / 40 barrel Pill tank 5.0 m3 / 40 barrel Hydraulic agitators Mixing room with 2 only Mission 5 x 6 centrifugal pumps @ 3,600 lpm powered by 22.5 kW / 30 HP electric motors 1 only Mission 5 x 6 centrifugal pre-charge pump @ 3,600 lpm powered 22.5 kW / 30 HP electric motors Harrisburg mixing hopper Derrick Flowline Cleaner shale shaker 12. WELL CONTROL SYSTEM ACCUMULATOR: Mainline Hydraulics 5 station closing unit; 336 liter / 90 gallon capacity; maximum pressure 21,000 kPa / 3,000 psi w/ master control located at accumulator CHOKE MANIFOLD: Hi Kalibre 21,000 kPa / 3,000 psi mounted upright in separate container Gut line 76.2 mm / 3 inch; 2 only 50.8 mm / 2 inch wing lines 1 only Willis 50.8 / 2 inch manual choke; 1 only Master Flo 50.5 / 2 inch hydraulic remote choke; 21,000 kPa 3,000 psi HCR valve; Hi Kalibre 34,470 kPa / 5,000 psi upper kelly cock; Hi Kalibre 34,470 kPa / 5,000 psi stabbing valve. MUD GAS SEPARATOR: 762 mm / 2.5 feet x 3.4 meter / 11 feet; 76.2 mm / 3 inch inlet; 203 mm / 4 inch outlet B.O.P s Annular 228.6 mm / 9 inch Townsend Spherical 21,000 kPa / 3,000 psi WP flanges Blind Ram 228.6 mm / 9 inch Townsend LWP 21,000 kPa / 3,000 psi WP studded Pipe Ram 228.6 mm / 9 inch Townsend LWP 21,000 kPa / 3,000 psi studded Spool 228.6 mm / 9 inch w/ 2 only 76 mm / 3 inch flanged outlets 21,000 kPa / 3,000 psi Certified August 2000 13. INSTRUMENTATION Weight indicator PLC controlled Totco Survey Tool — 177.8 mm / 7 inch Wireline drift indicator 14. TANKAGE 40 m3 / 250 barrel water tank 10,400 liter / 2,500 gallon fuel storage tank 15. LIGHT PLANT 350 kW Detroit Diesel series 60 (475 HP) 40 kW Standby 16. EXTRA EQUIPMENT Spinner Hawk hydraulic pipe spinner 6YEARS OLD WELL MAINTAINED AND IN EXCELLENT MECHANICAL SHAPE PRICE :$5,100,000 REDUCEDPRICE; $4,900,000 COMPANYFOR SALE (Ref#12670) Rig2, Walker-neer #20 on 1975 International truck Rig3, Walker-neer #32 Special on Tandem Gooseneck trailer Rig4, Wilson double drum on Army 6×6 tandem truck Rig6, Franks double drum 658 on 1999 Western Star tandem trck, tooled out Rig7, Franks Double drum 658 on 1996 Western Star Tandem Truck, tooled out Rig8, Smeal double drum 12T on 1982 Interantion, tooled out Schramm500/350 compressor, mouned on 1986 Mack tandem truck with Water Tanks andinjection pump 1991GMC tandem axle winch truck, with 65 ton winch and scoping Jim Poles (2)2004 F250 4×4 Ford Extended Cab, with headache rack, Rig truck 2002Dodge ton extended Cab 4×4 diesel with utilitybed, rig truck 1997Ford F250 4×4 Extended Cab diesel with Utility bed, rig truck 1998Ford F250 4×4 diesel 199224 ft. Gooseneck tandem trailer with 20,000 pound Axles (2)16 ft. flatbed, 2 axle trailers 16ft. flatbed, 2 axle tong trailer (4)Pipe trailers 38ft. tandem axle, oilfield float VType pipe trailer Coiltubing unit on a 38 ft. Tandem Axle trailer with injection pump 5/8Gardner Denver mud pump, powered by a 371 diesel on a skid with hoses Boeingpower swivel, S-45 Shopmade Joy power swivel Foster58-93 power tongs with tong heads from 2-3/8 to 7-5/8 with air backup (2)124 barrel surface pits (2)160 barrel surface pits Hydrostaticbulldog Bailer, 3-1/8 4inch casing Scraper 2,200 of 7/8 fishing rogs 1,700 of 1 fising rods 2,000 of 1 Hydrill pipe (4)3-1/8 drill collars (8)3 drill collars (6)sand pumps, sizes from 2 to 5 Boeing3-7/8 overshot with Grappels from 2-1/16 to 3-1/8 (2)Boeing 2-7/16 overshot with Grappels from 1-1/16 to 2 (3)Stripper heads 2-7/8 Casing Scraper 1980Paystar 5,000, tandem axle truck 1979GMC, tandem axle truck (25)Elevators that range from 5/8 , , 1 , 2 , all the way up to 10 Contentsof the shop and pipe yard which includes: 2dog houses, 2 welders, cable tool and tools, extra winches, Gaso Triplex pump3500 series, 2 extra pulling unit drums, and many extra parts to numerous toitemize. Price: $1,100,000 GARDNERDENVER 2000 (Ref#13770) Manufactured 1964, rebuilt 1995, double drum, airclutches, 5/8 drill line, mounted on 2 axle trailer powered by (2) 250 hpCummins diesel engine, 3 hydraulic leveling jacks, compound gear driven 7-1/2 x8 Gardner Denver FY-FXX mud pump (capacity with 7-1/2″ liner 600 gpm @182 psi) , 58 hydraulically raised mast, pull tested to 100,000#,racking board, rebuilt 1995 at a cost of $154,000, 10 retractable rotarytable, hook/block swivel, driller s floor 12 x 12 , 500 gallon fuel tank,2000 of 3-1/2 x 30 drill pipe, (3) 5 drill collars, 40 flat bed,small tandem with doghouse, easily drills over 3000 Price : $220,000 GARDNERDENVER WM40 (Ref#13773) Manufactured1984, mounted on International tandem axle truck with diesel engine, 7-1/2 x 8Gardner Denver duplex mud pump, 18 rotary table, set up for chain pulldownwith pulleys in crown and in bottom of mast, 1300 of 3-1/2 x 20 drillpipe, (2) 3-1/2 x 20 drill collars, gooseneck pipe trailer Price : $230,000 GARDNERDENVER 1500 (Ref#13774) Manufactured 1978, mounted on International Paystar5000, 5-1/2 x 8 Gardner Denver duplex mud pump powered by diesel engine, 1000gallon water tank, 10 retractable rotary table, 1500 of 2-7/8 drillpipe, set up for chain pulldown with pulleys in crown and in bottom of mast,good clean condition Price : $175,000 DMS10,000 rig (Ref#13766) DMS drawworks with compound, Faywick air clutch, (3)Cat 3406B diesel engines (425 hp each), Covco 135 mast, racking plate, 17 derrick stand, (2) pony subs 4 x 8 2 x 55 , (2) pony subs 10 x7 10 x 55 , Generator (generator house) 100 kw with 12V71 Detroit diesel,back up generator w/ Cat 1693 engine, Sowa 350 ton block, Grey B44 swivel, kelly4-1/4 x 44 with Baash-Ross kelly drive, KXG Gardner Denver 1000 hp, GXPGardner Denver 16 mud pump, Ideco 17-1/2 rotary table, (3) mud pits7 7 x 42 , North American desilter, shale shaker Linkbelt 2 screen 5 x 4and 4-1/2 , mud house 8 x 30 , centrifugal pump 3 x 4 x 11-1/2,centrifugal pump self priming, 400 bbl water tank, 4000 gallon fuel tank, new10,017 drill pipe 4-1/2 OD x .337 wall x 16.60#, 20 new drill collars8-1/4 with 4-1/2 X hole. Withthe following support equipment: 4-1/2 bottleneck Wooley tool 150 ton elevators, 2 elevator links, rat hole, mousehole, upper kelly valve hose 10,000#, shopbuilt wireline unit w/10 hp electricmotor, 1 set pipe tongs w/heads Type B, pipe skids (3) each, joint of pipe,triangular pipe racks, pipe skids, pipe racks, Lubster 3 compartment oil tank,120 bbl tank, bottom hole drill collar 6-1/4 w/4-1/2 X hole box x 4-1/2bit box, bored for 4R float, drill collar slips segmented, washipipe,accumulator, Shaffer BOP w/rams Type A (3000#), Bear automatic drillerinstalled, upper bearing, power banks (3) each RDP680-5, desilter 8 cone 4 ,top doghouse, welder and torch kit, Hydrill 10-1/2 15000# 1, air compressor 10hp 120 gal, liners (2) each 5 , weight indicators (2) Price : $2,400,000 Failing2500 (Ref#13767) Double Drum, air control, 46′ mast x 90,000# 2 hydraulic raising cylinders, monkey board 18″ Failing Rotary table 6-1/2 x 8″ duplex mud pump Mounted on 2 axle trailer with (2) 471Detroit diesel on deck 3 hydraulic leveling jacks 35 joints of 4-1/2″ x 30′ drill pipe 4 drill collar 6″ 4-1/2″ x 6-5/8″ sub 40 ton swivelhook block swivel 4″ x 30′ square Kelly and Kelly bushing Drillers’ work platform, handling tools Currently drilling in Mexico. Price: $ 170,000 JOYWB12 BOOSTER (Ref#13763) Rebuiltwith 350 hours Input2200 cfm/350 psi Output2200 cfm/800 psi 6-1/2″cylinders Oilfieldskid mounted 8V92Detroit diesel Spicertransmission 3:1 ratio Cooler,controls, air start Completeand in good condition Price :$60,000 GARDNERDENVER 2000 (Ref#13741) Manufactured1980, 63 x 80,000# hydraulically raised mast with monkey board, 18 rotarytable, 7-1/2 x 10 Gardner Denver duplex mud pump, (2) 471 Detroit dieselengine, mounted on 2 axle truck, 4 hydraulic leveling jacks, TB-40 75-tonhook/block, triple drum drawworks, 1 drum 16,000# 900 of , (2) drums13 , air clutch, 4-1/2 x 36 square kelly, 33 jonts of 4-1/2 x 30 drill pipe, 4 drill collars, subs 4-1/2 6-5/8 , elevator 4-1/2 ,other tools, good working condition, currently drilling in Mexico Price : $175,000 LONGYEAR44 (Ref#13452) rebuilt,vertical rig only (no angle), Detroit 353, diesel engine, Allison 643transmission (lock-in deivce, stays in gear, placed in), 42 stroke of head,19 gpm Vickers hydraulic pump, 35 gpm Bean pump, Longyear hydraulic chuck,60,000# capacity, folding mast (in14 section) Price: $50,000 INGERSOLLRAND T4 (ref#11237b) Manufactured 1981 900/350 IR HR2 air compressor Cat 3406 diesel on deck 7 rod carousel, set for 4 x25 drill pipe with 3 reg connection Cat water injection pump, 3 galloncapacity hammer oiler, water tank 2 winches Mounted on Crane Carrier with Cat3208 diesel engine 3 hydraulic leveling jacks Work done in 2000: HR2 compressor added 3406Cat diesel engine added Direct new drive line installed New hoses New sprockets Head rebuilt Hydraulic breakout wrench Table bushings, handling tools,fork wrench, pipe lifting sling Good tires, good condition Operator s and part s manual,Certificate of Title Price’as is’: $95,000 BREWSTER N-4 SingleDrum Drilling Unit. (Ref#12644) LEBUS Grooved f/1 Drill Line,Foster Makeup & Breakout Catheads, Air & Hyd- Operated Controls PRMAC 15 Dbl Hid Brake. WILSON 103 H Square Tubular Mast. Hyd Raise & Scoped. Dbl 3stage Raising Rams. & Shave Crown. Crown Safety Platform Ranking Board, 3 Standpipe, tong Counterweights. All Mtd on 35 L Triaxle Trailer, Air receiverTank, Hyd reservoir. Manual Leveling Jacks. Folding Walkways, Stairs. SafetyRails, Budd Wheels. Following equipment listed bellow: — Oilwell 17 Rotary Table w/Split Master Bushing chain driven — Gardner Denver GRX Duplex Mud Pump.Cast Steel. Fluid End w /Quick-Change caps. Oteco 2 Shear relief Valve. RodCooling Pump. Pressure Gauge. Bull Wheel. Skidded. Powered by a Detroit 6v-71Diesel Eng w/ Elec. Starter. Radiator. Gauges. Air Clutch. — Hydill K 20 -5000 PulsationDampener. — Mud mixer and tool box — Aprox 1300 4 Grade E 16.60#. Drill Pipe w/ 4 XH Conns. — 6 H 12 W X 16 6 L Sub w/rotary Beams. Deadline Anchor. 3w Wings x 40 L Back On Ramp. — (2) 45 Great Dane Spread axletrailer, 1971. (U.S.A.) — 4 1/4 X 40 L square Kelly andKelly bushing. — Kelly Hose pipe 21 ft. — 7/8 cable right laid 985 ft. Located Mexico Pricefor rig only: $ 150,000 Packageprice: $ 200,000 SKYTOPBREWSTER DRILLING RIG (Ref#12601) Manufactured1971, single drum drawworks, mounted 2 axle trailer, 6V71 Detroit diesel engine 105 x 250,000# Skytop hydraulically raised mast GardnerDenver FQ-FXQ 5-1/2 x 16 mud pump powered by Detroit 6V71 diesel engine, mudmixer, tool box 11 x 8 x 16 sub, 17-1/2 Brewster rotary table and right angle drive (2)1985 45 trailer, 4-1/4 x 40 square kelly and kelly bushing, 21 kellyhose pipe, 7/8 cable right hand lay 985 Weightindicator, handling tools, tongs,elevators, slips, elevator links, BOP (6)6 x 30 drill collars, (45) jts 4-1/2 XH 16.60# Grade E drill pipe, (2)Wilson tongs 125ton Skytop block and hook 100 ton swivel Location:Mexico. Will deliver to US border. Price : $200,000 Pricerig only : $150,000 INGERSOLL RAND RD20 (Ref#1729) Manufactured 1987, 50 Mast Detroit 12V71TA dieselengine on deck 900/350 HR2compressor Rod capacity 30 length / can set deepstring of range 2 casing, can set shallow string of range 3 casing using a winch 106,000 in/# torque, 0-94RPM, 110,000# pullback, 35,000# pull down FMC Bean Triplex Piston, Piston pump12 GPM/1000PSI Mounted on 4 axle Crane Carrier with 671 Detroit dieselengine Rebuilt in 1995: Both enginesrebuilt, 2 new cooler, 2 new hydraulic pumps, New cat pump, Gear box rebuilt, 2new mast lifting cylinders Dimension/weight: 12 6H x 8 W x 50 L, weight63,000# Price: $285,000 Midway 1000D Rotary Drill Rig (Ref#11870) This is a recently refurbished drilling rig consisting of a Midway 1000D draw works with a 131 Butler Parks mast and a 12 X24 X44 two piece substructure. The mast has been approved by Superior Derrick for 320,000 lb hook load. Draw works and mud pump are powered by Detroit Diesel Series 60 engines. The rig is designed for rapid rig-up and rig-down and can be transported in ~10-12 trailer loads. The entire rig was refurbished immediately before the current drilling project. Detailed Equipment Inventory Butler Parks 131 — inspected and approved by Superior Derrick immediately prior to present job at 320,000 lbs capacity. Substructure 12 x24 x44 two piece substructure Block SOWA Block with 10 lines, 200 ton capacity Rotary Table Continental EMSCO 20-1/2″ Kelly 4-1/4″ square Kelly 40 4 » FH bottom connection Swivel Oilwell SS-200 rotary swivel, 200 ton cap Drillers Console All new RexRoth Valves Weight Indicator QuadCo (Martin Decker) Catwalk 45 long X 8 wide, steel decked Mud Pump Mud pump IDECO T-500 Triplex powered by 470 BHp Detroit Diesel Series 60 engine Mud System Mud System 250 BBL capacity in 2 ea. 8X5-1/2X19 tanks with shale shaker; circulation system driven by two 30 hp electric motors Dog House 9 X 18 Doghouse with crew lockers and extended porch BOPE 10″ Dorland 3000 w/ spare element (copy of Regan torus). Bags interchangeable with Regan. Other Pipe racks; Slips and elevators; Type B tongs; Chains 4200 3-1/2″ 13.30 Grade E drillpipe; inspected and double white banded prior to present job; 12 ea. 4-3/4 drill collars, 30 ; 2 ea. 4-3/4 drill collars (new) 10 Support Equipment Drilling and casing hardware 2 3 IF box X 3 reg Box bit subs (1 new) 4 Lift subs for 4 collars 3 connection 1 4 FH box X 5 atlas Bradford pin 1 3 IF pin X 3 ball valve 3 5 X 6 centralizers 3 13 3/8 X 20 centralizers 1 7 pump down cement plug 3 Solid 5 casing nubbins 2 Welded 5 casing nubbins 1 5 atlas Bradford pin X Vam crossover 1 5 casing pin X 4 FH box 1 5 cementing head with valves 12 4 X 30 drill collars (3 new) 2 4 X 10 drill collars (all new) 135 pcs 31 nominal 3 drill pipe 3 IF connection 1 6 1/8 bit breaker 1 1000 ft of 5 Atlas Bradford casing (new) 2 Type B Manual tongs 1 Set of elevator links 2 Red Jacket Fuel pump (1 new) 1 20 140 triple roller chain (new) 1 3 roller chain (Table, New) Many master and links for roller chain 1 Table torque gauge (new) 1 55 Kelley hose Spare clutch kits for High and Low 1 Small tank, pump skid for wash down, Hydromatic brake 1 Mast threading cable for derrick 1 Mast raising equalizer 1 Spare element for Dorland Annular 1 Detroit Diesel Series 60 engine Mud Pump Spares 9 New plungers 2 Plunger rods 3 New rod connectors 6 Liner seals for 6 liner 4 Valves and seats for T500 2 T500 cover caps 2 spare 6 liners 1 Pressure valve chamber for T500 1 Pony rod for T500 1 Crate of misc. weld fittings, Mud supply valves, flanges, Andrew fittings Delivered to Seattle, Washington. PRICE: $1,700,000 This rig is designed for rapid rig up and rig down. It is a 12 load rig. The rig was refurbished before being placed on its current project. Bargain zone, drilling rigs for incredibly low prices THE BARGAIN ZONE Tel: 516-536-7375 Fax: 516-536-7317 E-mail: rigs@sunmachinery.com Contact US Welcome to the BARGAIN ZONE, where we promote rigs with one major characteristic:they are DIRT CHEAP! Feast your eyes on theseoffers, and do not hesitate to contact us for more information. CHICAGO PNEUMATIC 650WS (Ref#13873) Manufactured 1977, 825/300 GHH air compressor (1500 hours), powered by remanufactured Cat 3406C (400 hp) engine with 4450 hours, mounted on 1977 Ford LT800 carrier with remanufactured Cat diesel engine,5 speed with 4 speed aux transmission, remanufactured rear suspension w/Newway lift axle, rebuilt rotary head 1999, rebuilt winch 1999, new alternator on cab engine 2000, new compressor cooler 2001, near head motor 2002, remanufactured main pump and GHH air compressor 2002, rotary head bearings replaced Price : $80,000 Las Vegas Style Auction! The price of this rig will be REDUCED every week until sold!!!! ******* REDUCED TO$29,500 ******* EARTHDRILL DRILL RIG (Ref#13943) Capacity42 diameter x 75 deep (3) piece kelly 3 , 5 and 8 diameter x 25 each Mountedon White Cabover tandem axle truck with 400 hp Cummins diesel engine (rebuilt 0hours) , 13 speed transmission InternationalUD282 diesel engine on deck (2)hydraulic leveling jacks (removed from rig, but can be placed back on) Hydraulicswing out arm for bucket Pullline for dumping bucket (1) 24 bucket Goodcondition Price: $42,000 WEEK1 — REDUCED TO: $41,000 WEEK2 — REDUCED TO: $40,000 DRASTICPRICE REDUCTION TO SELL NOW: $29,500 1978 GMC CABOVER TRUCK 350 Detroit diesel engine, Allisontransmission, tandem axle, 18′ bed 120 gallon fuel tank with electric pump,electric winch 750 gallon water tank (square 1/4″steel) manufactured 2003 2″ suction pump with hoses Located New Jersey Price: $8,500 INGERSOLLRAND T4 (Ref#13913b) Manufactured1974, 750/150 IR air comressor, 8V71 Detroit on deck, mounted on Crane Carrierw/671 Detroit diesel engine, 13 speed tranmsision, 3 hydraulic leveling jacks,table bushings, wrenches, 300 of 4-1/2 x 25 drill pipe, 2 carousels, 2winches, hammer oiler, water injection pump, fully functional drill rig Price : $48,500 INGERSOLLRAND T4 (Ref#13913a) Manufactured1972, 750/150 IR air compressor, 8V71 Detroit diesel on deck, mounted on CraneCarrier with 6V53 Detroit, 13 speed transmission, 3 leveling jacks, tablebushings, wrenches, 300 of 4-1/2 x 25 drill pipe, 2 carousels, 2winches, hammer oiler, water injection pump, fully functional rig Price : $38,500 KOEHRINGCRANE ATTACHMENT (Ref#13878) Model DV190,manufactured 1973, Detroit 353 diesel engine, 8 stub boom, telescoping kelly(4) section kelly 4-1/2″ square, (1) 24′, (2) 30′ length, (1) 37′ length, slip clutch, torque converter drive, operatingcontrols , no buckets oraugers Price : $12,500 Las Vegas Style Auction! The price of this rig will be REDUCED $ 1000 every week until sold!!!! INGERSOLLRAND TH60 (Ref#13912) Manufactured1979, 750/250 IR air compressor, mounted on 1979 International Paystar 5000tandem axle truck with 8V71 Detroit diesel engine, 13 speed Fuller transmission,3 hydraulic leveling jacks, hammer oiler, water injection pump, carousel, rodbox, pipe lifting plug, table bushing, handling tools, hydraulic pipe wrench,300 of 4-1/2 x 20 drill pipe, 8 stabilizer, 6 hammer, 6 bit Price : $65,000 (Week1) REDUCED: $64,000 (Week2) : $63,000 (Week3): $62,000 (Week4): $61,000 INGERSOLL RAND T4 Manufactured 1973, serial number 11268 600/250 air compressor (new 1994, lowhours) Detroit 8V71 diesel engine on deck Mounted on Crane Carrier with 6V71 Detroitdiesel engine (rebuilt w/2000 miles) 2 carousels, 2 winches, water injectionpump, Petol wrench 300′ of 4-1/2″ x 25′ drill pipe This rig was damaged while loading onship. It is in New York and we will sell for a reduced price. We will part the rig out as follows: Mast and tophead: $11,500 Compressor and engine: $11,500 Drill pipe: $250 per joint Damaged Crane Carrier (damage to rearcontrols and cab), includes jacks and all equipment 6V71 Detroit is excellent -$8,500 LINE PIPE (Ref#7170) 40miles on 6-5/8″ OD x .280 wall thickness, 19 lb per ft, cut in 40′ longwith coupling or 21′ length, torch cut, plain end, no thread, from gas pipeline,straight seam welded, good for surface casing $5.00 per foot. Atlas Copco XRVS (Ref#10839) 4268 hours, 900/350. Mounted on 1991 International truck withdiesel engine. Complete and in good condition Price: Only $ 45,000 Sun’s retrofitting and refurbishing service Sun’s retrofitting and refurbishing service. January 29th, 2003 Sun has just retrofitted, refurbished and shipped to Africa thefollowing rig: (click on the picture to enlarge) Ingersoll Rand T3 Manufactured 1996. Depth capacity 1200′ with air or mud. 3000 hours. 900/350 IR HR2 compressor mounted on tandem axle Ford L9000 truck with Cat 365hp engine and 8 speed transmission. 4 hydraulic leveling jacks. Cat 465 hp diesel on deck. 7 rod carousel and rod box. 12 gpm Cat water pump. 7 gallon hammer oiler. 18,000# winch. Handling tools. Gardner Denver 5×6 duplex hydraulically operated mud pump. 300′ of drill pipe, (1) 6″ hammer, (1) 6-1/2″ bit. We can do the same for you on an Ingersoll Rand T3 or a Driltech D25. You can review our rigs and advise on which rig we could install the pump. Many of the rigs can be inspected in the New York area. Don’t hesitate to contact us if you needmore information on this service. We are more than happy to assist you in anyway we can. Sun Machinery’s boorinstallaties en olieveld uitrusti