pony rod seal mud pump supplier

High-contact force sealing lip design coupled with compression set resistant Resilon seal material retains lubricating oil in the power end, eliminating necessity of shut down to add fluid

One of the challenges oil and gas companies face is sustaining seal life in challenging applications. Parker’s proprietary Resilon® material offers superior wear resistance and the highest operating temperature on the market to ensure performance and reduce downtime due to seal failure.

Pony rod also called the intermediate rod, is an important part of the connection between the crosshead and the piston rod. It is the key component that connects the power end and the hydraulic end of the mud pump. One end is connected to the crosshead and the other end is connected to the piston rod by a clamp. Its outer circumference is filled with a packing box assembly. In the reciprocating motion, the outer circle of the intermediate tie rod and the sealing member in the packing box rub against each other. To ensure it"s wear resistance, the outer surface of the intermediate rod is hard chrome-plated.

We can offer a wide range of extension (pony) rods for triplex mud pumps that are made of high quality alloy steel (40Cr). After strict heat treatment of quenching and high temperature, the rods have the features of high intensity on surface and high tough inside. The surface is treated with galvanization or nitrogen for high intensity and low abrasion.

We are a large drilling tools, Drilling rig spares, Water well drilling and mining pump part, Drilling mud pumps and Fluid End Expendables and mud pump spare parts manufacturer in China.

We make all fluid end modules, Ceramic liners, Hy-chrome liners, rubber replaceable and bonded urethane pistons and all spares for popular brand mud pumps.

HNA offers four different type of liners for all popular mud pumps to suit any drilling condition, including Premium Chromium Liners, Ceramic Liner...

HNA offers four different type of liners for all popular mud pumps to suit any drilling condition, including Premium Chromium Liners, Ceramic Liner...

We developed the Sur-Line system to prevent mud and other fluids from passing into the power section from the fluid end section of the mud pump, and to prevent fluid from going from the power section into the fluid end section.

The Sur-Line system uses a unique floating seal system that bolts into the wall between the power section and the fluid end section. The seals inside this housing seal against the OD of the pony rod, thus preventing fluid from passing between the two sections of the mud pump.

We carry parts to fit pumps from most major manufacturers. Sur-Line® systems are simple enough to be installed by the rig crew, or can be installed by our technical service department at the rig site.

FET manufactures a full range of valves and seats for every drilling and well-servicing application as part of our full line of Osprey® mud pump system solutions. All of our valves and seats can be used in water, water base, oil base and synthetic base mud applications. FET offers additional valves and seats not listed below, including drilling valves, frac valves and well service valves. FET’s QC standards for the dimensional and material specs are extremely rigid in comparison to other manufacturers. Contact your FET representative to learn more.

Polyurethane has been an industry standard for dynamic sealing in hydraulic applications for more than 30 years. But polyurethane materials are not all formulated from the same hard- and soft-segment chemistry. The specific diisocyanate and chain extenders used in the synthesis of a polyurethane affect its physical and mechanical properties. When looking to achieve the best performance with mud and frac pumps, Parker’s Resilon® polyurethane is recommended. Our proprietary PPDI (p-phenylene diisocyanate) TPU formulation is specifically suited for injection molding of both large and small articles while retaining superior high-temperature performance.

The characteristics common to Resilon formulations make this PPDI class of material a leading choice for high pressure, dynamic sealing applications. These characteristics include exceptional:

"Our sales team members receive inquiries from well completion operators who are frustrated when they are interrupted and have to shut down to replenish gallons of hydraulic fluid lost from leaking seals. These operators and their service technicians who are in the field doing the change-overs make it known they "want the the tan colored pony rod seal," referring to Parker"s recognizable tan-colored Resilon 4300 formulation. Some operators are so pleased with the performance of the Parker pony rod seal they are demanding that the mud pump manufacturers install it as a condition to deploy their pumps on the job site."

Suction and Discharge Cover Seals. Our HGP Profile suction and discharge cover seals provide four times the reliable service life compared to traditional elastomer D-rings. Owing to its combination of unique geometry and Resilon 4300 polyurethane material, the HGP Profile resists wear due to the abrasive fluid proppant, high pressure and vibrating motion generated by high frequency pulsating pressurization. The tough, rugged material improves sealing reliability and minimizes degradation of fluid end mating hardware.

With well conditions becoming increasingly challenging and taking a toll on equipment and expendables, you require sealing products that will enable you to achieve greater production efficiencies, improve performance and reduce down time. Whether you service frac pumps, run completion operations, or build frac pump equipment, Parker’s proprietary Resilon materials can improve your bottom line by:

SUPERIOR SEAL EASY INSTALLATION Four sealing surfaces plus an excluder wiper provide a superior, dependable seal. Non-reversible shoulders on sealing cups help ensure mistake-proof installation. Outer O-ring provides misalignment allowance for concentricity creating an even more effective seal. Zinc phosphate coating prevents rust, maximizing tool life and enhancing reliability. Two jacking holes make removing the seal gland from pump housing effortless. Mounting bolts do double duty designed for use during jacking removal procedures. Alignment dowel bolt included in the P.R.E.S.S. kit simplifies installation. P.R.E.S.S. fits Gardner Denver mud pump models PZ-9, PZ-10, and PZ-11.

Forum Oilfield Technologies combines the specialized resources of industryleading companies to provide a full range of equipment, products, and technology to the oil and gas drilling and production industry. Each Forum company maintains its original management and its core commitment to customer responsiveness. www.forumoilfield.com

Kerr Pumps manufacturers a wide variety of high quality valves and seats. We offer plenty of configurations and materials to choose from such as our more popular salt bath nitrided 17-4 stainless steel. We also keep in stock a full line of Well Service inserted valves and o-ringed seats.

All of our pony rod glands are machined in-house on one of our many CNC lathes. The level of precision and finish in each gland gives an incredible repeatability from part to part. This consistency extends the life of each seal and pony rod which keeps you pumping longer in the field.And Many More!

We believe that making incredible pumps is just part of the game. Our main focus is taking care of our customers. That is why we stock a full line of pump replacement parts. We do our absolute best in meeting customer demands and continue to strive to be the most responsive pump company.

Jul082015PONY ROD OIL SEAL/DOUBLE OIL SEAL, LIST NO.-13, SR NO-2/24 (GOODS FOR PETROLEUM OPRATION,IMPORTED BY CONTRACTOR)ChinaDelhi Air CargoPCS1212,5231,044

LINER, 4-1/2″, CHROME IRON, FOR HOIST MPLINER, 4-1/2″, CHROME IRON, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1244388000000000001244388

LINER, 5-1/2″, CHROME IRON, FOR HOIST MPLINER, 5-1/2″, CHROME IRON, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1244390000000000001244390

PISTON BHG, 1.625 X 1.50, PLASTIC, PUMPPISTON BUSHING, 1.625 X 1.50, PLASTIC, F/HOIST MUD PUMP, MDL: E-447, MAKE: WEATHERFORD, P/N: 1411483000000000001411483

BONDED PISTON, 4-1/2″, NBR, FOR HOIST MPBONDED PISTON, 4-1/2″, NBR, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317551000000000001317551

PISTON,4″K-SERIES REPLACABLE RUBBER COMPPISTON, 4″ K-SERIES REPLACABLE RUBBER COMPLETE FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317544000000000001317544

PISTON, 4-1/2″, WEATHERFORDPISTON, 4-1/2″ B-SERIES REPLACABLE RUBBER COMPLETE FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317552000000000001317552

PISTON,5″B-SERIES REPLACABLE RUBBER COMPPISTON, 5″ B-SERIES REPLACABLE RUBBER COMPLETE FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317560000000000001317560

PISTON, 5-/2″ B-SERIES REPLACABLE RUBBERPISTON, 5-/2″ B-SERIES REPLACABLE RUBBER COMPLETE FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317568000000000001317568

PISTON, 6″ B-SERIES REPLACABLE RUBBERPISTON, 6″ B-SERIES REPLACABLE RUBBER COMPLETE FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317576000000000001317576

PISTON RUBBER,4″K-SERIES REPLACEMENT KITPISTON RUBBER, 4″ K-SERIES REPLACEMENT KIT FOR HOIST MUD PUMP, MODEL: E- 447, MAKE: WEATHERFORD, P/N: 1317520000000000001317520

PISTON RUBBER, 4-1/2″, WEATHERFORDPISTON RUBBER, 4-1/2″ B-SERIES REPLACEMENT KIT FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317522000000000001317522

PISTON RUBBER,5″B-SERIES REPLACEMENT KITPISTON RUBBER, 5″ B-SERIES REPLACEMENT KIT FOR HOIST MUD PUMP, MODEL: E- 447, MAKE: WEATHERFORD, P/N: 1317524000000000001317524

PISTON RUBBER, 5-1/2″, WEATHERFORDPISTON RUBBER, 5-1/2″ B-SERIES REPLACEMENT KIT FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317526000000000001317526

PISTON RUBBER,6″K-SERIES REPLACEMENT KITPISTON RUBBER, 6″ K-SERIES REPLACEMENT KIT FOR HOIST MUD PUMP, MODEL: E- 447, MAKE: WEATHERFORD, P/N: 1317528000000000001317528

VLVGUIDE BHG, CARBON STEEL, WEATHERF/DVALVE GUIDE BUSHING, CARBON STEEL, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1259512000000000001259512

LINER RETAINER STUD, LONG, W/ 2 HHNSLINER RETAINER STUD, LONG, W/ 2 HHNS, F/ HOIST MUD PUMP, MDL: E-447, MAKE: WEATHERFORD, P/N: 1230764000000000001230764

CROSS HEAD INSPECTION GASKET, F/HOIST MPCROSS HEAD INSPECTION GASKET, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1230743000000000001230743

REAR COVER GASKET ( PER INCH),F/HOIST MPREAR COVER GASKET ( PER INCH), FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1248661000000000001248661

STABILIER BOLT AND WASHER, F/ HOIST PUMPSTABILIER BOLT AND WASHER, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1775203000000000001775203

HEX CAP SCREW, 1/2″-13 X 1-1/2″, CSHEX CAP SCREW, 1/2″-13 X 1-1/2″ CS, FOR HOIST MUD PUMP, MDL: E-447, MAKE: WEATHERFORD, P/N: 1236068000000000001236068

HEX CAP SCREW, 5/8″-11 X 2-1/2″, CSHEX CAP SCREW, 5/8″-11 X 2-1/2″ CS, FOR HOIST MUD PUMP, MDL: E-447, MAKE: WEATHERFORD, P/N: 1236076000000000001236076

HEX CAP SCREW, 1/2″-13 X 1-1/4″, CSHEX CAP SCREW, 1/2″-13 X 1-1/4″ CS, FOR HOIST MUD PUMP, MDL: E-447, MAKE: WEATHERFORD, P/N: 1236067000000000001236067

HEX CAP SCREW, 3/4″-10 X 3 CSSCREW, HEX CAP 3/4″-10 X 3 CS B18.2.1 ZN GR5 (NS) FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1236087000000000001236087

NUT, HEX 3/4″-10 UNC, PLATED STLNUT, HEX 3/4″-10 UNC PLATED STL NYLON INSR (NS) FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 0221052000000000000221052

CRANKSHAFT BEARING ASSEMBLY SHIM SETSHIM SET, CRANKSHAFT BEARING ASSEMBLY FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1230726000000000001230726

DRILLED HEX CAP SCREW, 5/8″-11 X 1-1/2″SCREW, DRILLED HEX CAP 5/8″-11 X 1-1/2″ ALLOY B18.2.1 GR8 (NS) FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1386650000000000001386650

ROLLER BRG,9.843″ ODX5.512″ID 3.646 WDBEARING ROLLER 9.843″ OD X 5.512″ ID X 3.464″ WD SPHERICAL BRONZE FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1236034000000000001236034

CRANKSHAFT BRG CARRIER,RH, F/HOIST MPCRANKSHAFT BEARING CARRIER, RH, F/ HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1230683000000000001230683

BRG, 7.874″ OD X 4.331″ ID X 2.75″ WBEARING, 7.874″ OD X 4.331″ ID X 2.75″ WD FOR HOIST MUD PUMP, MODEL: E- 447, MAKE: WEATHERFORD, P/N: 1236018000000000001236018

HEX CAP DRILLED SCREW, 3/8″-16 X 1″, CSHEX CAP DRILLED SCREW, 3/8″-16 X 1″, CS, F/ HOIST MUD PUMP, MDL: E-447, WEATHERFORD , P/N: 1249114000000000001249114

PLATE NUT, CROSSHEAD GUIDE,F/ HOIST PUMPPLATE NUT, CROSSHEAD GUIDE, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1230695000000000001230695

FRONT MOUNT FLUID END ASSY, F/ MUD PUMPFRONT MOUNT FLUID END ASSEMBLY, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1234427000000000001234427

DISCHARGE VLVGUIDE BHG, F/ HOIST PUMPDISCHARGE VALVE GUIDE BUSHING, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1230774000000000001230774

FLUID END REAR DISCHARGE ASSY MUD PUMPFLUID END REAR DISCHARGE ASSEMBLY, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1885310000000000001885310

DISCHARGE VALVE COVER FLANGE, F/HOIST MPDISCHARGE VALVE COVER FLANGE, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1249942000000000001249942

O-RING, 65 OD X 3.1 CS HNBR,TRIPLEX PUMPO-RING, 65 OD X 3.1 CS HNBR, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1139167000000000001139167

DISC, VALVE, WFT T10 420, TRIPLEX PUMPDISC, VALVE, WFT T10 420, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, OLD P/N: 1372129, P/N: 1200282000000000001372129

SEAT, DISCHARGE VALVE, WFT T10 420SEAT, DISCHARGE VALVE, WFT T10 420, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1372130, P/N: 1200271000000000001372130

O-RING, 60 ODX3.1 CS, HNBR, TRIPLEX PUMPO-RING, 60 OD X 3.1 CS, HNBR, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1141659000000000001141659

SPRING, INTERMEDIATE VALVE, WFT T10 304SPRING, INTERMEDIATE VALVE, WFT T10 304, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1372132000000000001372132

CAGE, SUC VALVE, WFT T10 420,TRIPLEX PMPCAGE, SUCTION VALVE, WFT T10 420, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1372133000000000001372133

PLUNGER,32MM,WFT T10 Ni60+WC,TRIPLEX PMPPLUNGER, 32MM, WFT T10 Ni60+WC, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 265194000000000000265194

SLEEVE, GUIDE,32MM WFT T10AB,TRIPLEX PMPSLEEVE, GUIDE, 32MM WFT T10 AB, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 265280000000000000265280

RING, PACKING, 32MMWFT T10 TEFLON/KEVLARRING, PACKING, 32MMWFT T10 TEFLON/KEVLAR, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 265273000000000000265273

O-RING, 70 OD X3.1CS, HNBR, TRIPLEX PUMPO-RING, 70 OD X 3.1CS, HNBR, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 773845000000000000773845

SEAT, SUC VALVE, WFT T10 420,TRIPLEX PMPSEAT, SUCTION VALVE, WFT T10 420, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 291217000000000000291217

CAGE,DISCHARGE VLV,WFTT10420,TRIPLEX PMPCAGE, DISCHARGE VALVE, WFT T10 420, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1372126000000000001372126

O-RING, 45 OD X 3.1CS HNBR, TRIPLEX PUMPO-RING, 45 OD X 3.1CS HNBR, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1120428000000000001120428

SPRING, SEC VALVE,WFTT10 304,TRIPLEX PMPSPRING, SECTION VALVE, WFT T10 304, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 291218000000000000291218

SPRING, DISCHARGE VALVE, WFT T10 304,PMPSPRING, DISCHARGE VALVE, WFT T10 304, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1237269000000000001237269