pz 11 mud pump for sale pricelist
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment"s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
We export-orientated mud pump parts, including liners, pistons, piston inserts, valve inserts, oil seals, rod packing, fluid ends etc.. All of them meet or exceed DIN and API standards and have been exported to U.K., Germany, USA, Canada, Pakistan, Middle East, and so on.
The l-series of l. K-duplex mud pumps is the result of over two decades of incessant research and development by a young team of pains taking engineers, workingread more...
the l-series of l. K-duplex mud pumps is the result of over two decades of incessant research and development by a young team of pains taking engineers, working with an "india-can-doit" mood. They are backed by their close association with advanced pump technology and actualread more...
We provide a qualitative range of mud pumps, which are immensely used in construction, agriculture, waste water management and many other industries. These High Pressure Duplex Double Acting Mud Pumps are primarily reciprocating plunger devices designed forread more...
Established in year 1996, Maskill Enterprises is the leading Wholesaler Trader of Submersible Pump, Self Priming Pump and Double Wall Corrugated Pipe.
" GSL" Make Reciprocating Duplex Double Acting Mud Pump idle for water well drilling, core drilling, shallow crude oil drilling. Also sutable for Cement Slurry, Crude Oil, Boiler Feed, Sweage Mud pumps are suitble for mounting on skid, Trailer and on drilling rigs.
We know that cost savings on identical spare parts is important for offshore rig Companies today. Therefore we provide our services and spare parts at considerable cost reductions compared to sourcing from the major OEMs. Tratec can guarantee identical parts with all required part certificates. We maintaing the highest quality, using state-of-the art service facilities and experienced, specialist mud pump engineers for service work.
Tratec has supplied more than 20 mud pump spare part, overhaul and recertification projects the last 5 years. References include rig companies Odfjell Drilling, Maersk Drilling, Archer, Saipem, KCA Deutag, and others.
Tratec is an experienced specialist supplier of overhaul, SPS, parts and service for rig and drilling equipment. We can provide Norwegian quality and decades of experience, while maintaning sensible prices and flexible solutions.
Tratec can supply overhaul and parts compatible with the following Mud Pump makers and trademarks: National Oilwell Varco (NOV), MHWirth, Continental Emsco, Gardner Denver, Lewco, Drillmec, and others. Tratec is an independent supplier of drilling equipment parts. Tratec is neither a licensee, nor is affiliated with any of the named original equipment manufacturers (OEM). The manufacturer’s names, equipment names, or trademarks used herein are solely for identification purposes, and are not intended by Tratec to cause confusion as to the source, sponsorship, or quality of the parts supplied by Tratec. The original equipment manufacturers named above and throughout this website do not sponsor, promote, warranty or endorse Tratec’s supply of parts.
MAINTAIN PUMP RELIABILITY AND PERFORMANCE WITHGENUINE GARDNER DENVERPARTS AND SUPPORT SERVICESGardner Denver and OPI genuine pump parts aremanufactured to original tolerances and designed foroptimum dependability. Design and material innovations are the result of years of experience with hundredsof different pump applications. Reliability in materialsand quality assurance are incorporated in our genuinereplacement parts.
Your authorized Gardner Denver and OPI distributor offers all the backup youll need. A worldwide network of authorized distributors provides the finest product support in the pump industry.
Authorized distributor service technicians are factorytrained and skilled in pump maintenance and repair.They are ready to respond and assist you by providingfast, expert maintenance and repair services.
For the location of your local authorized Gardner Denver and OPI distributor refer to the yellow pages of yourphone directory or contact:Distribution Center:Gardner Denver Machinery Inc.Master Distribution Center5585 East Shelby DriveMemphis, TN 38141Phone: (901) 5426100Fax:(901) 5426159
INSTRUCTIONS FOR ORDERING REPAIR PARTSWhen ordering parts, specify Pump MODEL andSERIAL NUMBER (see nameplate on unit). The SerialNumber is also stamped on top of the cylinder end of theframe (cradle area).All orders for Parts should be placed with the nearest authorized distributor.Where NOT specified, quantity of parts required perpump or unit is one (1); where more than one is required
per unit, quantity is indicated in parenthesis. SPECIFYEXACTLY THE NUMBER OF PARTS REQUIRED.DO NOT ORDER BY SETS OR GROUPS.To determine the Right Hand and Left Hand side of apump, stand at the power end and look toward the fluidend. Right Hand and Left Hand are indicated in parenthesis following the part name, i.e. (RH) & (LH), whenappropriate.
TABLE OF CONTENTSMaintain Pump Reliability and Performance with Genuine Gardner Denver Parts and Support Services . . . . . . . 1Instructions For Ordering Repair Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Model PZL99D Option Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Frame & Miscellaneous Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 5Drive Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6, 7General Service Fluid Cylinder & Manifolds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 9High Pressure Service Fluid Cylinder & Manifolds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11SteelFitted Center Guided Valve (General Service) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12With Polyurethane Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12With Carboxylated Nitrile Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Full Opening Valve With Polyurethane Insert (High Pressure Service) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Piston Rod & Coupling (General Service) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Piston & Liner (General Service) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Piston Rod & Coupling (High Pressure Service) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Piston & Liner (High Pressure Service) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Piston Lubricating Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Oil Circulating Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Oil Pump & Piping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 19Piston Lubricating Piping (General Service) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 21Piston Lubricating Piping (High Pressure Service) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 23Heat Exchanger Group (Optional Equipment) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Oil Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Valve Seat Puller (Optional Equipment) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Optional Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Gardner Denver Unit Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Back Cover
Part No.200PZL001A64AA979A23850B564A566D1379A7550B7200PZL715200PZL052655EE060202PZL25375A237201PZL006202PZL715N200PZL31575A5225C1788N202FXT052655EF05040L1727H1164E2200PZL30975LM8960DD3550V44200PZL11035C24200PZL24750B37201PZL315200PZL053655EF050201PZL7155C24KXG84225C1818655EF04025F13206PZL05225C1839655ED040201PZL052300PZL052202PZL052301PZL052203PZL052302PZL052655EF200
Name of PartBEARING, Connecting Rod to Eccentric . . . . . . . . .RINGRETAINING, Connecting Rod Bearing . . . . .PLATERETAINING, Bearing to Eccentric . . . . . . .SCREW, Bearing to Eccentric . . . . . . . . . . . . . . . . . .WIRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PLATERETAINING, Bearing to Connecting Rod .PLATERETAINING, Bearing to Connecting Rod .SCREW, Bearing to Connecting Rod . . . . . . . . . . . .WIRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BEARINGROLLER, Crosshead Pin . . . . . . . . . . . .PINLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SET SCREW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CROSSHEAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PINCROSSHEAD . . . . . . . . . . . . . . . . . . . . . . . . . . .RINGRETAINING, Bearing . . . . . . . . . . . . . . . . . . .PLATERETAINER, Crosshead Pin . . . . . . . . . . . . .SCREW, Crosshead Pin Retainer . . . . . . . . . . . . . . .WIRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RODEXTENSION . . . . . . . . . . . . . . . . . . . . . . . . . . .SCREW, Rod to Crosshead . . . . . . . . . . . . . . . . . . . .WIRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PLATERETAINER, Oil Stop Head to Frame . . . . .GASKET, Oil Stop Head . . . . . . . . . . . . . . . . . . . . . . .HEADOIL STOP . . . . . . . . . . . . . . . . . . . . . . . . . . . .GASKET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCREW, Oil Stop Head to Frame . . . . . . . . . . . . . . .SEAL, Oil Stop Head . . . . . . . . . . . . . . . . . . . . . . . . .RINGRETAINER, Oil Stop Head Seal . . . . . . . . . .SCREW, Seal Retainer to Oil Stop Head . . . . . . . . .BAFFLEROD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ADAPTOR, For Rotating Shaft . . . . . . . . . . . . . . . . .SCREW, Adaptor to Shaft . . . . . . . . . . . . . . . . . . . . .
12BA674D51PZ1400655EF05D97A29PZ1400203PZL25375B4197A2912BA5PZ83876F10200PZL005200PZL189200PZL706206PZL16875AG1797A29200PZL839PV70197A29202PZL16825BC13200PZL05125F9655EE08020118721PV139875A102PZ8402PO1398655EF050
Name of PartLINER . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ORING . . . . . . . . . . . . . . . . . . . . . . . . . . .PISTON ASSEMBLY, IncludesReference Numbers 9 & 11 . . . . . . . . . . .INSERT GROUP, IncludesRetainer Plates & Rings . . . . . . . . . . . . . .
OIL PUMP COMPLETE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .COVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BALL BEARING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SHIM, Bearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ROTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SEAL, Mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ORING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PLUGHOUSING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .HOUSINGBEARING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SEAL, Bearing Housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BEARINGROLLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VENT PLUGSUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VENT PLUGDISCHARGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WASHER, Vent Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .* Not shown.
Name of PartSCREENOIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ELBOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ELBOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PUMPOIL** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCREW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .KEY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ADAPTOR, Oil Pump . . . . . . . . . . . . . . . . . . . . . . . . .PLATE, Oil Pump to Frame . . . . . . . . . . . . . . . . . . . .SCREW, Adaptor to Frame . . . . . . . . . . . . . . . . . . . .BUSHINGHUB, Gear . . . . . . . . . . . . . . . . . . . . . . . .GEARDRIVEN, Oil Pump . . . . . . . . . . . . . . . . . . . .WIRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Pump Discharge to Filter)ADAPTORHOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . .HYDRAULIC HOSE ASSEMBLY . . . . . . . . . . . . . . .TEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VALVELIQUID RELIEF . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .UNIONSTRAIGHT . . . . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FILTEROIL*** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Filter to Crosshead Spray)NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ELBOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .REDUCERPIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .HYDRAULIC HOSE ASSEMBLY . . . . . . . . . . . . . . .CLAMP, Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WASHER, Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCREW, Hose Clamp . . . . . . . . . . . . . . . . . . . . . . . . .*
SCREENOIL . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . .UNIONHAMMER, Wing . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . .VALVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . .TEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . .VALVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ADAPTORHOSE . . . . . . . . . . . . . . . . . . .HYDRAULIC HOSE ASSEMBLY . . . . . . .PUMP PISTON LUBRICATING,**Includes Reference Number 13 . . . . . .KEY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCREW, Pump to Skid . . . . . . . . . . . . . . .LOCKWASHER, Pump to Skid . . . . . . . .WASHER, Pump to Skid . . . . . . . . . . . . . .SHEAVE . . . . . . . . . . . . . . . . . . . . . . . . . . . .BUSHINGHUB . . . . . . . . . . . . . . . . . . . . .BELT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .AUXILIARY SHEAVE ASSEMBLY . . . . .SET SCREW, Sheave . . . . . . . . . . . . . . . .
(Pump to Liner Group)ADAPTORHOSE . . . . . . . . . . . . . . . . . . .HYDRAULIC HOSE ASSEMBLY . . . . . . .ADAPTORHOSE . . . . . . . . . . . . . . . . . . .REDUCERPIPE . . . . . . . . . . . . . . . . . . . .VALVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .***
SCREENOIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .UNIONHAMMER, Wing . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VALVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VALVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ADAPTORHOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . .HYDRAULIC HOSE ASSEMBLY . . . . . . . . . . . . . . .PUMP PISTON LUBRICATING,** IncludesReference Number 13 . . . . . . . . . . . . . . . . . . . . . .KEY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCREW, Pump to Skid . . . . . . . . . . . . . . . . . . . . . . . .LOCKWASHER, Pump to Skid . . . . . . . . . . . . . . . . .WASHER, Pump to Skid . . . . . . . . . . . . . . . . . . . . . .SHEAVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BUSHINGHUB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BELT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .AUXILIARY SHEAVE ASSEMBLY . . . . . . . . . . . . . .
(Pump to Liner Group)ADAPTORHOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . .HYDRAULIC HOSE ASSEMBLY . . . . . . . . . . . . . . .ADAPTORHOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . .REDUCERPIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VALVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ELBOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TEEPIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TEEPIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(Frame to Lube Oil Tank Group)NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ELBOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TANKLUBE OIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PLUG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCREW, Lube Tank to Skid . . . . . . . . . . . . . . . . . . . .WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PLUG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .COVERLUBE OIL TANK . . . . . . . . . . . . . . . . . . . . .NUTWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FITTINGTUBE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TUBEFORMED . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CAPBAFFLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RINGWATER DISTRIBUTION . . . . . . . . . . . . . . . .UBOLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .LOCKWASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCREW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .LOCKWASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BRACKETWASH PIPE . . . . . . . . . . . . . . . . . . . . . . .SCREWFLANGE HEAD . . . . . . . . . . . . . . . . . . . . .
R5F29Q1764E1678AUX11329Q10R5G29Q1064E112013457655EE06095B550B564E1129Q10R5G29Q1078AUX11364E1690K16564E1463F2164C463F2164Z363AJ8X4029B31R14G63AJ8X4064C463F2164E2929Q15829Z83200807663U12X1364C6263U12X4029Z83
HEAD (Not Included with 100E12 Puller) . . . . . . . . . . . . . .VALVE SEAT PULLER ASSEMBLY, Includes ReferenceNumbers 2 thru 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .HYDRAULIC JACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CENTER STEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CENTER STEM NUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PULLER H BAR BASE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CENTER BUSHING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CENTER BUSHING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .HYDRAULIC HOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .HYDRAULIC PUMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GAUGE ADAPTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GAUGE COUPLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GAUGE COUPLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GAUGE 170 TON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CARRYING CASE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .***
BAR, Valve Cover Tightening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PIN, Valve Cover Tightening Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .HYDRILL DAMPENER (K105000) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .HOSE, For Charging Hydrill Dampener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TOOL, Piston Rod Nut Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BLOCK SUPPORT & DISCHARGE CROSS GROUP, Includes301PZG4067 and PZL75278 Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BLOCK GROUP (Includes next six items) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GASKET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GASKET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FLANGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FLANGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FLANGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BLOCK GROUP (Includes next five items) . . . . . . . . . . . . . . . . . . . . . . . . . .BLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .STUD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .STUD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SUPPORT GROUP (Includes next three items) . . . . . . . . . . . . . . . . . . . . . . . . . . .SUPPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BASE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BASE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GARDNER DENVER UNIT RECORDThe following unit identification plate is provided as a convenience to you, our valued GardnerDenver customer. Please take the time to copy all the information from the actual nameplate ofyour unit. The model number, date manufactured and serial number will be required whencontacting the company or your distributor for information or replacement parts.
We mainly manufacturer Emsco F-500, F-800, F-1000, F-1300, F-1600,Gardner Denver PZ-9 and National 12-P-160 mud pumps. The quality products, competitive prices, respensive service and short delivery time earn a lot of reputation for us.
Product Instruction：we devoted to professionally manufacure and sales the mud pump in global,the quality and your satisfication are always being our achievement,we would,t say we are the best choice for u,but our product will tell u.+MORE
Product Instruction：This series mud pumps are strictly manufactured according to SY5138 standard of CNPC and are tested accordingly when leave factory.
Product Instruction：series mud pups are compatible and interchangeable with most of the F series mud pumps of other made like FB series (EMSCO, BOMCO and LSNOW), HHF/3NB-Fseries (Honghua), RSF (Huabei Rongsheng) RL-F series (Shandong Rongli), F series (Shandong Kerui), TFI F series (Texas First Industry),TSC, etc+MORE
Product Instruction：F-800light weight drilling pumpis designed for special drilling/workover application where equipment weight and dimension should be weill limited like drilling rig working onboard offshore platform,barge,drilling rig working in wetland,jungles and so on.it certainl can also work for conventional drillingrigs.+MORE
This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.
8613371530291