raise rite hydraulic mud pump pricelist

Concrete raising is an easy alternative to replacing your sunken concrete, often times saving you over 50% of the cost of replacement! Some common areas we raise, level and repair are patios, front porches, driveways, sidewalks, garage & parking slabs, steps, and pool decks.

We have been helping home owners level and repair their concrete for over 45 years and are the only Wisconsin concrete raising company that provides professional mudjacking concrete raising and polyurethane concrete raising services! Raise-Rite is Wisconsin’s trusted concrete repair contractor. Schedule an mudjacking estimate in Green Bay, De Pere,Appleton, Oshkosh, Sheboygan,  Manitowoc, Two Rivers, Neenah or nearby to learn more about why mudjacking or polyurethane concrete lifting with Raise-rite is the best cost saving and time saving option for repairing sunken driveways, sidewalks and more!

Owning a home for over 50 years, one will need help and service of many people in the repair business. We have never in all this time, had any company do a better job than the people we worked with in your company. The workmen were very professional and clean. The work was done quickly with minimum of disruptions to our property. Most importantly, they left the yard and our home much cleaner than we expected. It was a job well done. Thank You RaiseRite!

The first step we take when starting your concrete raising project is to strategically drill one inch holes into the section that requires lifting. These allow us to hydraulically fill the spaces underneath your concrete.

After the holes have been drilled we setup our equipment. Trucks remain parked while the mudjacking crew maneuvers the pump to the repair site. Armed with the mobile pump, and many lengths of hose, the mudjacking crew can reach just about anywhere.

A sand-based slurry, infused with Portland cement, is hydraulically pumped through the 1″ holes to fill voids and raise the settled concrete. As the slurry fills the voids and crevices under the concrete slab, the pressure of the filling begins to raise the concrete. We measure the level at which the concrete slab is raised, ensuring it’s raised enough to make it level with the surrounding slabs.

After our mudjacking crew has completed raising your concrete, we insert a plug into each hole, and patch it with new cement. The concrete slab is ready for use immediately. It is recommended, however, to allow the patch material to set-up before use, which typically takes a couple of hours.

A family-owned and operated business since 1974, RaiseRite has pumped over 100,000 tons of grout and millions of pounds of polyurethane, and gained the statewide recognition of Wisconsin’s premier polyurethane foam and mudjacking company for concrete repair.

After completing more than 75,000 mudjacking jobs in Wisconsin, we have an answer for all of your concrete repair needs. Hydraulic Mudpumps Inc. which is also part of the family owned RaiseRite companies, manufactures mudjacking equipment for other businesses around the world.

Seeing the need to upgrade the antiquated slab raising pumps that were available at the time for concrete repair, RaiseRite designed the first totally hydraulic slab raising pump in 1979. Shortly after, Hydraulic Mudpumps, Inc. was established and continues to produce high quality pumps that are field tested every day by the RaiseRite crews.

Since 1974, RaiseRite has received requests for foundation repair. To respond to those requests, RaiseRite Foundation Pier Systems was incorporated to address the customers with foundations that have settled or bowed, providing another service to our customers.

As RaiseRite’s reputation for excellence continued to grow, the company quickly expanded, and in 1994 became one of the largest foundation piering contractors in Wisconsin with RaiseRite Foundation Pier Systems.

At RaiseRite Foundation Pier Systems, Inc., we know that no one ever wants a foundation problem. As foundation repair professionals, we meet each challenge by evaluating the entire problem, analyzing each piece of the picture, then design a custom solution that best corrects the problem.

Our primary emphasis remains on customer satisfaction. We are the only company in Wisconsin to offer you the choice between polyurethane and mudjacking concrete raising methods. Our experienced crews approach each foundation repair, concrete raising, and waterproofing job with the same high degree of professionalism and top quality service that made us what we are today.

Raise Rite Concrete Lifting can precisely return your concrete slabs to their original position and save you the cost of concrete replacement services.

Our crew works with a hydraulic mud pump, as well as a 14-inch concrete saw to cut joints that have stuck together and a gas-powered concrete drill for quick and easy work.

Mudjacking costs $3 to $6 per square foot, and foam jacking is $5 to $25 per square foot. The average cost of slabjacking to raise a concrete slab is between $511 and $1,790, with most spending $830. Concrete leveling prices depend on the size and condition of the slab and soil conditions.

The two main options to raise concrete are mudjacking and foam leveling. Each has considerable differences and is better suited for specific areas. Mudjacking requires larger holes drilled and costs $3 to $6 per square foot, while the stronger polyurethane foam runs $5 to $25 per square foot.

Mudjacking is a method of lifting a sunken concrete slab by pumping a mud-like mixture under the concrete to make it level again. Mudjacking, also known as "slab jacking" or "concrete leveling," is a quick and cost-effective way to level sinking concrete foundations, sidewalks, patios, and driveways.

The mudjacking process starts by strategically drilling holes 1” to 2” wide and injecting material to fill any voids under the slab, raising the sagging concrete within minutes. Mudjacking is eco-friendly, cures in 24 to 48-hours, and typically costs 25% to 50% less than concrete replacement.

Foam jacking, also known as "polyfoam" or "polyjacking," is a modern version of mudjacking that levels concrete slabs in a less invasive way. High-density polyurethane foam is injected into ⅝” holes that expand to lift and level the sunken concrete. Polyfoam is stronger and longer-lasting than traditional mudjacking.

Concrete leveling foam cures in 30 minutes, is mold and water-resistant, is not subject to erosion, and provides 6,000 to 14,000 lbs. per square foot of support. However, it"s more expensive than mudjacking.

Mudjacking costs $3 to $6 per square foot, while polyurethane foam jacking or PolyLevel runs $5 to $25 per square foot on average. Larger, thicker structures such as porches are more costly per square foot than simple slabs like sidewalks.

Mudjacking works for most situations, although the thick mud may not get into every crack, and the subsoil could sink again over time. One solution is to drill more holes, which increases the invasiveness and limits the effectiveness.

Mudjacking may not be the best option for load-bearing parts of the foundation or if your concrete is severely cracked. Consider using stronger polyfoam or an alternative repair option if:

Repairing a foundation with foam jacking costs $10,000 to $25,000 and up or from $5 and $25 per square foot, depending on the foam type and amount used. Leveling an uneven slab foundation with mudjacking costs $4,500 to $9,000, although mud pumping is weaker and less stable than foam.

Mudjacking a small section of a driveway costs $600 to $1,200 on average. The average cost to level an entire driveway is $1,400 to $2,700 for mudjacking, and between $3,000 and $7,000 for lifting with high-density polyurethane foam.

The average cost of mudjacking 2 to 4 sections of a garage floor is $300 to $900. Raising an entire 2-car garage floor costs $1,100 to $2,200 for mudjacking or between $2,500 and $5,400 for foam injection. Mudjacking a garage floor is cheaper than repouring new concrete or using a self-leveling compound.

Identifying the root cause that made the garage floor sink is vital. If you have a steep slope against the side of the garage where the subsoil has eroded, then you may need steel-jacking or structural foundation repairs with piers instead of mudjacking.

The average cost to level an 800-square-foot basement floor is $2,400 to $4,800 with mudjacking, or between $5,000 and $12,000 with foam jacking. Mudjacking a basement floor is advised for gaps of a few inches between the bottom of the walls and floor—where nails and insulation are visible.

The average cost to mudjack a concrete patio is $450 to $900, or from $3 to $6 per square foot depending on the extent of the damage. Raising a concrete patio slab costs about half as much a pouring a new concrete slab and only takes a few hours.

The average cost of mudjacking a 30" long sidewalk is $300 to $800, or about $50 per section. Sidewalk leveling next to trees, bushes, driveways, or patios costs more and takes extra time due to limited access. Empty voids under the walkway more than a couple of inches deep cost extra.

As long as contractors fix the underlying structural problems that caused the slab to sink, mudjacked sidewalks can last for 20 years. Mudjacking is advised against old walkways due to a higher risk of damage.

Mudjacking concrete steps costs $200 to $400 or about $300 to $800 for foam jacking a 20 to 40 square foot stoop. Mudjacking is typically half the price of completely replacing the steps.

Leveling concrete steps may require drilling through the surrounding slab and sidewalk areas. Otherwise, hydraulic levers raise the steps from the sides, and the slurry or foam is pumped in directly underneath.

Mudjacking a 400-square-foot pool deck costs $1,200 to $2,400 on average or between $2,800 to $6,000 when using concrete leveling foam. Poly foam is excellent for pool decks since it’s the best erosion and water-resistant material. Contractors should know that excessive fill materials in the wrong places could damage underground piping systems leading to the pool.

Any water drainage issues, lack of gutters, large trees, or plumbing leaks that caused the concrete to sink must be mitigated before mudjacking to ensure long term results.

Reputable mudjacking companies use an electronic elevation survey, or a Ground Penetrating Radar Scanning (GPR) system to inspect the subsoil and measure the cavity size before estimating and drilling. GPR provides a more accurate estimate and helps professionals avoid in-floor obstacles such as plumbing and wiring.

Mudjacking fill can contain cement, limestone, clay, or sand-based grout. The materials used dictate the weight-bearing capacity and longevity. Low-quality slurry that’s mostly mud and sand doesn"t last as long. Ask your contractor for a high-quality fill that maintains the concrete elevation longer.

Mudjacking fill contains water, which can cause the concrete slab to shift while curing. Once the mudjacking fill is fully dry, it contracts slightly, making it less stable than polyurethane lifting foam.

Heavy mudjacking fill material adds a burden to a poorly compacted subgrade, which can cause the slab to sink again. However, polyjacked slabs rarely sink again.

Sand pumping costs $3 to $7 per square foot or between $550 to $1,000 to level a 12" x 12" concrete driveway slab. Sandjacking costs about 50% less than installing a new slab. Sandjacking is a variation of mudjacking that uses dry limestone sand to lift concrete slabs.

Sandjacking is typically noninvasive and doesn"t require drilling holes through the slab if the fill can be pumped in from under the sides. Sandjacking is recommended in areas where the soil is often wet. The fill compacts more and allows for better drainage. Sandjacking has no curing time and is ready to use right away.

PolyLevel costs about $15 per square foot or around 30% to 40% more than standard mudjacking. PolyLevel is a patented, high-density polyurethane foam used for heavy-duty concrete stabilization projects like home foundation and driveway work. This polyfoam cures in as few as 30 minutes.

Mudjacking lasts 5 to 10 years on average, depending on the subsoil base below. PolyLevel foam doesn’t break down like mud fill and lasts much longer. Still, both mudjacking and polyjacking can sink without a stabilized subsoil. Contractors should work to prevent future subsoil erosion to increase longevity.

Mudjacking can lift between 6,000 and 14,000 pounds per square foot, depending on the type of foam used. These polyurethane foams are stronger than bedrock and provide more than enough support for most homes and slabs.

Mudjacking is used successfully to level foundations with a relatively noninvasive procedure. Mudjacking only requires several 1” to 2” holes to be drilled into the foundation without damaging the surrounding landscape. This technique costs half as much as removing and replacing your existing foundation.

The average concrete leveling project is completed in one day or less. Mudjacking a small concrete pad takes around 5 hours, and leveling a sunken basement takes about 30 hours. Mudjacking takes anywhere from a few hours to a few days to cure, depending on the project"s size.

Most insurance policies exclude coverage for mudjacking, foundation cracking, or a house sinking. Homeowner’s insurance typically covers foundation damage due to natural disasters or other issues such as plumbing. For new homes under warranty, the builder may be responsible for mudjacking expenses.

DIY concrete leveling projects are possible for concrete slabs 4 square feet or less. Anything larger requires an experienced contractor with mudjacking equipment. Concrete slabs of all sizes are extremely heavy. Without adequate weight-bearing equipment and careful preparation, you risk breaking the slab.

Concrete leveling foam kits cost $50 to $700 and are suitable for small concrete crack-filling repairs. This method is only a cosmetic solution and doesn’t raise or level the concrete. Foam kits are epoxy or polyurethane mixes that are applied with a caulking gun to hide the appearance of cracks.

Self-leveling concrete costs $1 to $5 per square foot if you install it yourself, which is about half the price of mudjacking. Only pour self-leveling cement on slabs that have sunken an inch or less, and avoid using it on basement floors.

Most areas don"t have mudjacking pump rentals available for the general public because local laws require a contractor’s license. New foam and mudjacking equipment costs $4,000 to $10,000. The mud slurry fill, power drills, and extension hoses are sold separately.

Polyjacking equipment generally has an extra heating component to warm the fill up to 90°F before sending it through the high-pressure pump that combines the poly-spray with a special hardening agent right inside the nozzle.

Mudjacking is an equipment-intensive project that requires a specialized professional. Be sure your contractor has up to date licensing, insurance, and bonding before signing a contract. Insurance is necessary to protect you accidental property damage or injuries that may occur.

Check their online reviews and experience. The best mudjacking companies have at least 5 years of experience with great reviews on HomeGuide and Google.

Don"t let contractors overcharge by purposely overestimating the amount of fill. They may not refund the balance if they use less filler. Polyurethane pumps have a gauge that tracks the amount of foam pumped. Check the gauge before they start and after they finish, and compare with the pricing in the contract.

Manufacturer of concrete raising equipment & mud jacking & polyurethane accessories. Distributor of used equipment. Various products include pumps, trailers, hopper trucks, gun clamps & tips, insertion guns, breakers, hammers, drills, remote controls, bins, bits, compressors, extension cords, foam, generators, grease, hose, mixers, kits, O-rings, ports, hydraulic power-packs, ramps, reactors, rigs, electric saws, material screens, switches, tires, transmitters & workbenches. Made in USA.

HMI is proud of all its innovations and products, but perhaps the greatest innovation is the Quik Mix Pro automated volumetric hopper/mixer unit. The first fully automated unit rolled off the production line in March of 2003. This slabjacking unit, when mounted on a truck body, can carry a slab raising pump, dry material, cement, and water. Along with its unique twin shafted mixer, it can automatically mix and place material into the hopper of a pump. No shoveling is required!

Expanding beyond just the slabjacking industry, in 2008 HMI developed a revolutionary new Hydraulic Power Pack 10. With a new 2 in 1 design it offers 10,000 psi at 1 ½ gallons per minute, or 3,000 psi at 9 gallons per minute. Not only is the unit great as a seperate hydraulic power pack for running hydraulic tools (mixers and mudpumps), piering contractors can use it to install helical and resistance piers.

Hydraulic Mudpumps, Inc. is committed to future refinements and development to its product line. Our future will be determined by requests from you, our customer, and the upcoming industry demands.

That fortuitous weekend of labor was the start of it all. The growth and innovations have followed, whether it was the invention of the first hydraulic mud pump or the introduction of polyurethane systems at the entrepreneur level.

RaiseRite Concrete Lifting, Inc. began in 1974, by myself and two others, with no money to buy our equipment so we rented it from my father-in-law. Our first truck was a 1951 Chevy flatbed, we affectionately named "Bullwinkle". By September, RaiseRite needed to add another crew to cover Green Bay.

In 1978, I knew there had to be a more efficient and less strenuous way to raise concrete, so I developed the first hydraulic mudpump. The next year, sales were well on their way as was HMI as we began manufacturing the "new" hydraulic mudjacking pumps. Today, HMI continues to manufacture mudjacking pumps and systems, polyurethane foam lifting systems, and polyurethane foam.

Monthly, HMI hosts Discovery and Training Seminars either at our Manitowoc training facility or various metropolitan areas throughout the United States. These seminars offer individuals looking to add to their existing business or start-up a business, the opportunity to experience "hands-on" how to raise concrete. As a supplier and trainer, HMI has helped put over 1200 families into business and have contributed to the employment of over 10,000 people.

I am still retaining the position of CEO, but I work side by side with my two sons: Jeff-President HMI and Brian-President of RaiseRite. Over the past 40 years, we have lifted and leveled 14,000,000 sq. ft. of concrete participating in over 70,000 projects. HMI"s equipment has lifted and leveled 240,000,000 sq. ft. of concrete on every continent, but Antarctica. I look at this anniversary not being about us at HMI/RaiseRite. It is all about you-our customers-Thank you again!

About HMI/Raise Rite: HMI/Raise Rite has two Manitowoc locations: 4803 Leonard Lane and 1025 E. Albert Dr. employing approximately 30 individuals. In addition to concrete raising, RaiseRite has a foundation piering and waterproofing division. For more information, please use the contact information and links provided below.

NO REPLY FROM RAISE-RITE. This floored me. As a business owner myself, it"s unbelievable that you are okay to lose a job because you are too lazy to make a phone call and talk to your own company.

Based on this,  I decided to try to salvage the project with Raise-Rite since I was now on my own. I called them, hoping to get someone who understands a customer, and was complexity surprised that they actually had people who could just say, "sure, let"s see what we have", and schedule the job.

MORAL OF THE STORY- a seriously broken piece of the chain can cost you business. Raise-Rite was propped up in this case because there were people WORSE in the sales process.

Raise -Rite did a good job in the end, but when you have a process that makes people look for other options, you"re really vulnerable. If you really can perform the job, as RR can do, it is an absolute crime to act indifferent, allowing opportunities to simply go away. when the rest of the organization know what they are doing and can accomplish their mission.

Mudjacking and polyurethane injections are two of the most common concrete repair methods in use today. They have a similar purpose of repairing and leveling old or damaged concrete.

Sand, cement, and other materials combine to make a mixture known as a slurry. This mixture is then pumped into holes drilled into the concrete to raise and level it.

Mudjacking is best for concrete that’s in good condition but is no longer level. It works for slabs, driveways, porches, walkways, decks, steps, and more.

There are some projects where mudjacking isn’t the best choice. It won’t work for slabs that are heavy or load-bearing because it doesn’t have enough power to move them without causing damage. It can also cause more problems for severely damaged concrete because it can’t fill every hole and may lead to sinking over time.

Also, if the soil below the concrete is not able to support additional weight – mudjacking materiel weighs around 100 lbs per cubic foot, then the concrete slab may sink again over time.

Lastly, the sand and mortar used in mud jacking is not water proof materiel and can easily erode away over time if water is draining along the sides and underneath the slab.   So this process in a area that is going to be exposed to a lot of water is not ideal.

Polyurethane concrete lifting, a.k.a. PolyLift or Polyjacking uses high-density geo-technical expanding foam to raise and stabilize concrete slabs.  The material and equipment is similar to what is used in spray foam insulation however the foam used for lifting concrete is a lot stronger.

The foam can expands up to 7 feet at each inject hole. It raises the concrete while stabilizing it and filling any gaps between the concrete and the soil.

At the same time, mudjacking uses heavier materials, and requires more cleanup. There are more holes that are large enough for weeds to grow through them. Water can also get in, leading to shifting slabs and further damage and settling.

Foam injections cure in 15 minutes compared to a full day for mudjacking. It’s less invasive because it requires smaller and fewer drilling holes. It’s stronger, doesn’t retain moisture or pollute the environment, and can reach areas that are inaccessible to mudjacking equipment.

Despite these benefits, you may be left wondering how long does foam jacking last? While mudjacking usually lasts 2-5 years, polyurethane can last much longer if properly maintained.

A polyurethane injection lasts longer than a mudjacking repair job. This means you won’t have to repair the concrete again as often, saving you money over time.

For these reasons and more, you should consider a polyurethane injection over mudjacking. It’ll give you a better value for your money and a longer-lasting, better-looking repair. It’s also a versatile option that can repair concrete anywhere throughout your home.

Professionals may recommend mudjacking because it’s cheaper and simpler,. It’s not always the best choice for several reasons. Many of the cons of a polyurethane injection don’t seem as problematic when compared with its positive aspects.

Polyurethane injections are more expensive than mudjacking but longer-lasting. This can lead to savings over time as it doesn’t need to be redone as often.

The foam has enough power to lift large slabs. It’s easier to control and won’t cause as much damage to sensitive concrete. Polyurethane concrete raising equipment can also reach smaller spots than large mudjacking equipment.

Polyurethane concrete raising leads to a longer-lasting and quicker repair, and it can reach more areas than mudjacking. It’s a better value for your money and the best choice for almost all projects.

RaiseRite concrete lifting Wisconsin is a family-owned and operated business since 1974, RaiseRite has pumped over 100,000 tons of grout and millions of pounds of polyurethane, and gained the statewide recognition of Wisconsin’s premier polyurethane foam and mudjacking company for concrete repair.

Our primary emphasis remains on customer satisfaction. We are the only company in Wisconsin to offer you the choice between polyurethane and mudjacking concrete raising methods. Our experienced crews approach each foundation repair, concrete raising, and waterproofing job with the same high degree of professionalism and top quality service that made us what we are today.

For many years, we watched 3 slabs of cement, sink from the frost between our garages. We thought we would have to bust the concrete and start over which would have been costly and a hard job. then a friend told us about Raise-rite and it was a fraction of the cost and looks brand new. Bryan- Green Bay, WI

What types of problems can RaiseRite concrete raising fix? RaiseRite concrete raising is a fantastic alternative to replacing your concrete, often times saving you over 50% of the cost of replacement! Some common areas we raise, level and repair are patios, front porches, driveways, sidewalks, garage & parking slabs, steps, and pool decks. Benefits to raising concrete with polyurethane foam While there are many benefits to using Milwaukee concrete raising contractors who specialize in polyurethane concrete raising, here are a few that we find to be the most important:

RaiseRite is the only concrete raising company in Wisconsin that is an expert in, and offers both mudjacking and polyurethane concrete raising services, and has been recommended by satisfied customers for over 40 years!

You’re researching foundation repair options and have come across the term “mud-pumping” and you want to know what it means. Or maybe you are thinking about when a foundation is lifted, what happens with the space underneath your home? There’s a void there now and does it get filled in or what?

Mud-pumping is a finishing step of foundation repair, but not every foundation repair contractor adds this final step. It’s not automatically done so you might be wondering why some companies would use this technique or what its advantages and disadvantages are.

At Anchor Foundation Repair, we have been repairing foundations since 1985 and began adding mud-pumping to all slab-on-grade foundation repairs in 1998. We decided to take every reasonable step to provide the most security and stability in foundation repairs to Brazos Valley homeowners and bought our first hydraulic mud pump at that time.

We know mud-pumping has great value and importance in a foundation repair project, it’s a standard part of our slab foundation repairs. But we can tell you about it in an objective way so that you can decide if it’s as important to you as it is to us.

During the repair process, the home is raised back up to its original elevation. So imagine that the home is lifted, but since the soil was compacted below it, now there is space between the ground and the bottom of the slab. This is also called a “void” which is a fancy word for empty space. I mean, technically there’s air in the space so it’s not totally empty but . . .

Now, you could just scream into the void underneath your home. But more productively, you can consider filling it with mud-pumping material so that there is not a bunch of empty space between the bottom of your home and the earth. Mud-pumping helps lessen the opportunity for more foundation settlement or problems to arise.

Mud-pumping is not typically needed for pier and beam foundations, but for slab-on-grade foundation repair, it is an option. While mud-pumping is not *required* in foundation repair, it has many benefits for the homeowner.

So no, mud-pumping is not necessary to complete a foundation repair project, and manyfoundation repair companiesdon’t do it. Even though foundation repair contractors often skip this final step, you may want to seriously consider it. All the “whys” are in the next section.

Nature doesn’t like empty things, nature wants to fill them up. This is that “nature abhors a vacuum” thing. If the void under your home doesn’t get filled with mud-pumping material. It will very likely get filled with something else, like:

PRO #1: So one of the pros of filling voids with mud-pumping is that it takes up that empty space and prevents those areas from getting filled with something less desirable. The slurry material flows and fills every little space, permeating even the smallest pockets of air. But there are a couple more compelling reasons for you too . . .

PRO #2: Empty space creates weaker points and added stress to the foundation where it is not directly supported. Mud-pumping provides extra stability and holding power to your foundation without empty spaces under it. Having something solid underneath your whole slab is more supportive than drilled piers or pressed piles alone.

PRO #3: Mud-pumping the voids under your foundation also minimizes the risk of further movement and settling. When things are all snug and surrounded by other material, it’s less likely for them to wiggle and move around. It’s kinda like tucking your kid in at night. You burrito that little one in good with the hopes that they will stop moving and fall asleep, right?

Side Effect Bonus PRO #4: The step before mud-pumping is testing your under-slab plumbing to make sure there are no leaks. If leaks are found, they need to be fixed first. So if mud-pumping is used on your foundation repair, you will have the added comfort of knowing that there are no leaks or that they have been repaired. This is another way to make sure that further problems don’t come up later for your foundation or underneath it.

Like anything else, there are a few cons to mud-pumping as part of your foundation repair. Even though we are a fan of mud-pumping, it does have some risks and downsides that we want you to be aware of.

CON #1: Mud-pumping costs more. This is an additional step that takes added time and more materials, SO there will be extra cost to you. Mud-pumping adds between $2,000 and $4,000 to the price of your average-sized foundation repair.

CON #2 (minor): There is a small risk of over-pumping the mud and adding too much material under the home. This can cause a hump in your floor. But with an experienced team working on your foundation repair project, this has a low chance of happening. Just want you to know this is a potential problem that could happen with an inexperienced or less careful contractor.

CON #3: Just like that kid that you tucked into bed with a burrito blanket, there’s no guarantee that no more movement will take place. Mud-pumping is a safeguard, an insurance policy, a risk minimizer, but it’s not an absolute settlement solution with no potential for failure.

Like many forms of insurance or safeguards, you don’t really know if you’re going to need it or not. You might only know the value of mud-pumping afterward in hindsight since we can’t predict what will happen later with your home.

As mentioned, mud-pumping is a final step in a foundation repair project, but it has a few steps of its own to complete the process. Here’s a breakdown of how it works:Raise the foundation and secure it in place with shims

The mud-pumping process takes about half a day or small projects and several delays for larger jobs at the end of a foundation repair project. So it doesn’t add a lot of time to the job but it can add some peace of mind.

What’s the worst-case scenario if you don’t do mud-pumping? Well, you could spend thousands of dollars on a foundation repair only to have it settle all over again due to missing that final step and leaving voids under your foundation.

On the flip side, your home can still settle no matter what you do (or it might not, there’s no way to know for sure) but the risk is minimized as much as humanly possible if you add mud-pumping to the repair. This seems like a tricky decision, so let’s try and make it a little easier with some “if-then” statements.If you love your home and plan to be in it for the long haul and want the very best, get the mud-pumping.

If you are selling your home and won’t be living in it any longer, then you’re not worried about the longevity of the repair and could skip the mud-pumping.

Here’s one more “if-then” statement for you: if you want to use Anchor Foundation Repair for your slab-on-grade foundation repair project, then mud-pumping is part of the deal. We don’t leave repair projects without the last step because we also have a lifetime warranty and service agreement.

At Anchor Foundation Repair, we have seen firsthand the consequences of not filling voids after repairs in our 35 years in business. We have inspected and repaired dozens of homes that had previous foundation repairs (by other companies) without mud-pumping. We have felt the hollow-sounding floors and seen homeowners having to go through the repair process again to get it right the second time.