raise rite mud pump free sample

For example: a 10 ft. x 10 ft. section, that needs to be raised, figures to 100 square feet. This job would cost somewhere between $200 and $500 to repair. How far the slab is settled, if there are voids present, or if other sections need to be involved in the repair, will determine where in that scale the job would cost. This is why we offer FREE estimates, so our experienced crew member can come to your home or business, and provide you with an accurate estimate for completing your specific project.

Mudjackingmaterial is a sand based grout that will not lose its density. Combined with Portland cement this non-organic mixture is pumped under the slab of concrete.  Different from organic material, RaiseRite’s slurry will not decompose or breakdown.

The RaiseRite trucks remain parked on the street, while the concrete repair crew maneuvers the equipment to the site requiring repair. The hydraulic mudpump is roughly the size of a riding lawn mower. Armed with many lengths of hose, the mudjacking crew can reach just about anywhere.

Foam plugs help RaiseRite patch the holes, and act as a shock absorber, when slabs are affected by the frost cycle.  Holes that are not patched with foam can pop out, when the material and earth under the slab expand from freezing.

When concrete is raised with polyurethane foam (FoamJacking), these plugs are not used. The material used for raising the slab replaces the inserted foam plug as a shock absorber.

Solid slabs of concrete can be raise and stabilized. Gravel areas or blacktop are unable to be repaired, and need to be replaced or re-installed to remedy settling issues. Slabs of concrete that are badly cracked may also be too damaged to lift.

If you are not sure if your concrete can be raised, call us for a Free Estimate. Raising settled concrete can be half the cost of replacing it with less damage to your landscaping and downtime. Our expert estimators will be able to assess and provide you with an accurate, FREE estimate for your project.

Both methods of concrete lifting will achieve the same results. Mudjacking concrete leveling and polyurethane concrete raising will raise and support sunken or unstable concrete slabs by drilling holes and pumping material under the slab.

Mudjackinguses a sand based material that is infused with Portland cement.  This slurry is hydraulically pumped under the slab to fill voids and raise the concrete.  Mudjacking material weighs on average 100 lbs per cubic foot.

After the slab has been raised, the only visible evidence that the concrete has been repaired are the holes.  For this reason, polyurethane has gained HUGE popularity because of the nearly invisible 5/8″ holes that remain after the job is completed.

Polyurethane concrete raising drills a nearly invisible 3/8 or 5/8″ hole and the process calls for considerably fewer holes than traditional mudjacking.

Concrete raising is typically half the cost of replacing your concrete slab. When large voids are present, this can increase the cost of the repair. While polyurethane material is more expensive than mudjacking material, the smaller hole size, lighter material weight, and fewer injection holes, make the investment in polyurethane over mudjacking well worth it.

RaiseRite is the most honest and friendly company that I have ever worked with. I called for an estimate and instead of telling me I need all these repairs done, they told me just to keep an eye on it. They felt at the time that yes there was some settling happening, but not enough to warrant me paying thousands of dollars in repairs. I had another company come in to give me an estimate and they said I had so much damage that I better get them fixed right away. I did my research, called an inspector, and realized I made a great choice listening to RaiseRite.

“This company performed when scheduled/promised, they were punctual, professional, and clean. I’ve gotten very fast replies when needed as well. Such a smooth experience! Not to mention, our driveway is finally raised and level! It was HORRIBLE before!”

“RaiseRite did a great job not to mention saved me from having to replace my driveway and sidewalk. The crew were very efficient and knowledgeable have already referred them to family members and neighbors.”

We"re Raise-Rite Concrete Lifting and we"ve been raising sunken concrete in Carol Stream, IL for over 40 years. Family owned and operated, we speciali…

That fortuitous weekend of labor was the start of it all. The growth and innovations have followed, whether it was the invention of the first hydraulic mud pump or the introduction of polyurethane systems at the entrepreneur level.

RaiseRite Concrete Lifting, Inc. began in 1974, by myself and two others, with no money to buy our equipment so we rented it from my father-in-law. Our first truck was a 1951 Chevy flatbed, we affectionately named "Bullwinkle". By September, RaiseRite needed to add another crew to cover Green Bay.

In 1978, I knew there had to be a more efficient and less strenuous way to raise concrete, so I developed the first hydraulic mudpump. The next year, sales were well on their way as was HMI as we began manufacturing the "new" hydraulic mudjacking pumps. Today, HMI continues to manufacture mudjacking pumps and systems, polyurethane foam lifting systems, and polyurethane foam.

Monthly, HMI hosts Discovery and Training Seminars either at our Manitowoc training facility or various metropolitan areas throughout the United States. These seminars offer individuals looking to add to their existing business or start-up a business, the opportunity to experience "hands-on" how to raise concrete. As a supplier and trainer, HMI has helped put over 1200 families into business and have contributed to the employment of over 10,000 people.

I am still retaining the position of CEO, but I work side by side with my two sons: Jeff-President HMI and Brian-President of RaiseRite. Over the past 40 years, we have lifted and leveled 14,000,000 sq. ft. of concrete participating in over 70,000 projects. HMI"s equipment has lifted and leveled 240,000,000 sq. ft. of concrete on every continent, but Antarctica. I look at this anniversary not being about us at HMI/RaiseRite. It is all about you-our customers-Thank you again!

About HMI/Raise Rite: HMI/Raise Rite has two Manitowoc locations: 4803 Leonard Lane and 1025 E. Albert Dr. employing approximately 30 individuals. In addition to concrete raising, RaiseRite has a foundation piering and waterproofing division. For more information, please use the contact information and links provided below.

As an industry leader it is our obligation to improve the process through both the development of the process and the equipment that makes it possible. Our direct involvement with the development and refinement of equipment is both hands on and through collaboration with specialty manufacturers. CRC’s concerted effort to improve equipment and training (Safety and Technical) as well shared industry knowledge from other CRC operators has made slab jacking both a reliable and economically desirable alternative to removal and replacement. That is why, in this region of the country, mud jacking is often referred to as “Concrete Raising”.

Concrete Raising Corporation’s core business is raising and leveling concrete by method of mud jacking or high density polyurethane. Our other services include void filling washouts and abandon utility lines. Should you require another type of concrete restoration or related service feel free to call and tap into our open network of various service providers that include; engineering, concrete paving, waterproofing, and more and many other professional service providers.   Please contact one of our knowledgeable staff today.

The volumetric mixer units provide a consistent high quality sub base material. The material consistently fills voids of less than ¼”. CRC can routinely place in excess of 30 cubic yards of high quality material in a day resulting in an average in excess of 2,500 square feet of roadway pavement per day (production varies as a function of void, required lift and condition of pavement). Purpose Built Pumps improve Quality of Work CRC, Inc. has been instrumental in the development of purpose built mud jacking pumps that are used industry wide.

Our pumps are designed to deliver material at a pressure and rate to safely and precisely void fill and lift pavement with minimal damage.  CRC, Inc. continues to improve upon and refine the equipment to not only improve the final product but to improve reliability and ease of use; all resulting in a better end product at a reasonable price.

CRC’s cementitious grouts are is Purpose Built – Materials are processed and stock piled at our own facility.  Our aggregates are blended and screened at our facility so as to provide a high quality material free of stones, clay balls and organics. The aggregates, when combined with Portland Cement, provide for a material with a low percentage of shrinkage (1% or less), limited free cement and good stability while being still remaining pumpable and with great flow characteristics; All of which are necessary characteristics for good slab jacking/mud jacking results and lasting performance.

Concrete saved through the mud jacking process saves not only the pound of Co2 spent per pound of Portland Cement in the original concrete but all the fossil fuels and time that would have been spent removing and replacing the involved pavement. Mudjacking and polyurethane use less energy than the carrying of the men and materials required to do the demolition alone.

Explore a wide variety of htd pumps on Alibaba.com and enjoy exquisite deals. The machines help maintain drilling mud circulation throughout the project. There are many models and brands available, each with outstanding value. These htd pumps are efficient, durable, and completely waterproof. They are designed to lift water and mud with efficiency without using much energy or taking a lot of space.

The primary advantage of these htd pumps is that they can raise water from greater depths. With the fast-changing technology, purchase machines that come with the best technology for optimum results. They should be well adapted to the overall configuration of the installation to perform various operations. Hence, quality products are needed for more efficiency and enjoyment of the machines" full life expectancy.

Alibaba.com offers a wide selection of products with innovative features. The products are designed for a wide range of flow rates that differ by brand. They provide cost-effective options catering to different consumer needs. When choosing the right htd pumps for the drilling project, consider factors such as size, shape, and machine cost. More powerful tools are needed when dealing with large projects such as agriculture or irrigation.

Alibaba.com provides a wide range of htd pumps to suit different tastes and budgets. The site has a large assortment of products from major suppliers on the market. The products are made of durable materials to avoid corrosion and premature wear during operations. The range of products and brands on the site assures quality and good value for money.