sewage mud pump factories quotation

Distributor of non-clogging submersible centrifugal, motor grinder and wastewater submersible pumps. Grinder pumps are available in 1 to 3 phase, 1 to 10 hp motor and 1.25 to 3 in. discharge dia. Features vary depending upon model, including internal coatings, double mechanical/rotating/stationary seals, cutter impellers, casing covers, epoxy resin cable bases, auto-cut protection, multiple impeller design, epoxy coated surfaces, corrosion resistant radial cutters and cutter rings. Grinder pumps can be customized. Submersible centrifugal pumps are designed for use in deep sumps. Suitable for municipal, commercial, industrial, school, federal, wastewater drainage, state/local park and other applications. Most items available in stock.

Whether you are pumping water, food, ceramics, sludge or sewage, Piper Pumps has vast experience in helping businesses like yours with industrial and commercial pumping solutions. For 18 years we have supplied and installed industrial pumps for agriculture, pharmaceutical, food & beverage, sewage, mining and ceramic industries all over Southern Africa.

The WQ/QW series submersible sewage pump is of cast iron or stainless steel construction. It can be fitted with a tungsten carbide tipped, single channel, cast iron impeller which rotates against a serrated suction cover to cut solids before pumping. Suitable for effluent transfer in domestic, or industrial applications,where suspended solids need to be reduced in size and pumped over a short to medium distance. The stainless steel shaft is fitted with a double mechanical seal (in an oil chamber). It is available free-standing or for guide rail mounting when supplied with the auto-coupling accessory. Available in single- phase and 3 phase both, with an optional float switch. Supplied with 8 metres power cable.

According to the liquid details: PH/Temperature/Substance/Max solids size ect, we can supply the pump material: cast iron/SS304,SS316,SS316L stainless steel/Duplex stainless steel and so on.

SUJAL Sewage Submersible Pumps are designed for pumping Raw Sewage, Sludge, and Effluents including liquids containing large proportion of solid or fibrous matter. High efficiency motor ensures low cost operation and better life.

AMT Cast Iron Sewage/Trash pumps are designed for trouble free and economical handling of solids laden liquids and slurries. Pumps are available in three NPT port sizes: 2″, 3″ or 4″. Cast iron construction with two vane stainless steel self-cleaning impellers, silicon carbide mechanical seals for abrasion resistance and Buna-N O-rings and check valves. Built-in check valve allows pump to reprime automatically in an open system without the foot valve. The solids handling capabilities of the pumps make them ideally suited for a variety of industrial applications including: sewage treatment, canneries, chemical processing, wineries, tanneries, meat packing, breweries, pulp, wood chips, process water, sludge and slime, waste water, white water and other applications. These sewage/trash pumps will easily handle liquids containing sewage, stones, sticks, mud and other solids. Minimum liquid requirement must be above 85% — maximum 15% solids. Failure to do so may damage pump and void warranty.

The submersible sewage pump (hereinafter referred to as the electric pump) consists of three parts: motor, pump and seal.The motor is located at the upper part of the electric pump, which is a three-phase asynchronous motor. The alloy double-end mechanical seal is used between the pump and the motor. This model has features such as energy-saving, anti-winding, non-clogging, automatic installation and automatic control. This pump uses special structure impeller and new mechanical seals to make it more efficient in delivering sewage with solid particles and long fibers. Compared with traditional impellers, the new ones (spiral-flow type or double-leaf type) have an excellent delivery capacity, which improves the pump performance. It runs more smoothly without any vibration.

Main use: widely used in industry, agriculture, mining, civil construction, municipal environmental protection and other places, it is the ideal equipment for pumping mud, mortar, domestic wastewater, sewage feces and urine, and containing short fiber, paper, sand and other solid particles and rural drainage irrigation river pond silt.

Proper medium: liquids with chemical property similar to pure water should be non-corrosive. Solid size should be no larger than 30% of the pump suction diameter. Fiber length should not be over 2.5 times of the pump suction diameter. When the medium density is more than 1.05, the motor power should be increased accordingly to prevent the motor from overload operation.

Check whether pump fasteners are loosen and whether the pump body runner is blocked by foreign matters before installation to avoid damage of impeller and pump body in running. Supporters for the outlet pipe should be installed separately so that the weight will not be added to the pump so as to prevent it from deformation. The pump base for both movable and fixed installation must be leveled by a level. After the base is ready, install the pump on the base and then use a level to check horizontal and vertical situation between the pump and motor shaft. Use the iron shim to change the height of the base if the pump is out of level. Then grout the base and anchor bolt holes by pouring the concrete into the grout hole. The levelness of the coupling device should be calibrated by a level when coupling installation is adopted. Horizontal level tolerance should not exceed 0.1mm/m. Use the measure gage to calibrate parallelism of two coupling rods to ensure the parallelism tolerance will not exceed 0.2mm/m. Tighten the anchor bolt to make sure there is no looseness between the anchor bolt and concrete in case of bad influence on pump performance when starting. For easy maintenance and safe use, install a regulating valve on the outlet pipe and a pressure gauge near the outlet to guarantee the normal operation within the rated performance range, which lengthens the lifetime of pumps. Rotate the impeller from the suction side after installation. Disassemble the pump and find out the reasons if there is friction or stuck pump. The pump installation can be divided into three types, movable type, fixed type and coupling type.

Our high quality centrifugal pump parts are utilized for repairing and maintaining a variety wastewater treatment pumps (or sewage treatment pumps) including: influent and effluent pumps, primary and secondary sludge pumps, RAS pumps, pumping stations and lift stations across North America.

For more than thirty years, ABBA has been manufacturing high quality replacement parts and assemblies to fit most major brands of centrifugal pumps used in municipal water & wastewater applications, including replacements to fit:

Municipalities count on ABBA to provide solutions that will extend the life of their solids handling pumps and splitcase water pumps. ABBA also makes many replacement submersible pump parts.

The next time you need effluent pump parts or parts for ANYsewage or water pump, call ABBA. Call for a quote today – start saving time and money with genuine ABBA Replacement Pumps, Parts & Service!

JB Pumps the official brand of JB PUMPS INDIA PVT. LTD. positions itself as not just a pump manufacturing company but as a brand technologically sound & one stop solution provider to meet the needs of customers across the globe.