slurry mud pump in stock

Ideal for moving underwater sludge, abrasive slurries, and rocks, the submersible slurry pumps sit at the bottom of a tank, lagoon, pond, well, or another water-filled environment. Submersible pumps suction out solids and liquids right at the pump itself. The materials are taken in at the intake and pass through a hose connected to its discharge valve. DAE Pumps submersible pumps include a watertight enclosure with the industry’s best o-rings seals for worry-free operations.

With the hose head in the water and the other end connected to the pump, self-priming slurry pumps suction the material to the pump, then out through the discharge valve. Self-priming pumps get prime at the pump by electric or diesel motors drawing water to it. They mount to a portable trailer for easy transportation or on a stationary skid.

The flooded suction slurry pump is located outside of a tank or hopper, typically below or as low as possible. Gravity forces the sludge and liquids to the pump, then passes the materials out through the pipe or hose on the discharge end. The flooded suction pump does not require priming because it uses gravity to prime, and it doesn’t use as much power to operate as the other types of slurry pumps because it does not have to draw the material to it. However, a flooded suction slurry pump can get corrosion and require more repairs because there is always liquid filling the pump.

Gear pumps are one of the most common types of positive displacement pumps. They provide a constant volume of fluid that passes between the teeth of two meshing gears and the casing. Rotating gears and separation of teeth create a suction that pulls fluid in through the inlet. The gears then trap the liquid and move it around the casing to the discharge or outlet. Each revolution creates consistency in the flow of fluid.

Lobe pumps are like gear pumps in that fluid flows around the interior of the casing, but they use lobes instead of the gears with teeth. The lobes do not touch each other, thus reducing wear, and they are driven by external timing gear that allows the lobe pump to operate in either direction.

Vane pumps use blades, know as vanes, that slide in and out of rotor slots to move fluids. This action creates a suction that pumps fluids. The vane pumps use multiple sets of vanes that mount on an off-center rotor that sits close to the cam wall creating a crescent-shaped cavity on the other side. These blades, which are always in contact with the cam wall, turn with the rotor. With the spinning of the rotor, the vanes slide out when they reach the cavity, trapping fluid. As the vanes reach the end of the open space, they slide back in, and the trapped fluid thus moves to the outlet or discharge valve.

Screw pumps and twin-screw pumps use rotating screws to move liquids and solids from one end of the pump to the other. Because of the rotating, turning action, the spinning motion is what pumps the material. The twin-screw pumps are identical to the screw pump, but with a dual screw for more power. Screw pumps are capable of high flow rates with very little to no vibration. They provide excellent usage in irrigation, oil production, fuel injection, and fuel transfer applications.

The piston pump uses a piston or pistons to draw in liquids and solids by creating a vacuum in the chamber to suction in the materials, then pushing them out the other end. Pistons repeatedly move up and down inside the pump chamber to pump the material. DAE Pumps piston pumps use high-quality O-rings to ensure reliable performance. These pumps are used for high-pressure washing, oil production, paint spraying, and other low viscosity liquids.

Diaphragm pumps use a flexible membrane that expands the volume of the pumping chamber bringing in the fluid by opening the inlet valve, then compresses to push out the materials through the outlet valve. The hermetically sealed diaphragm pumps are safe for pumping hazardous and corrosive liquids.

Our high-head pumps are specially designed for industrial and commercial applications where high heat and high pressure are required. Whether you need to pump water, chemicals, or other liquids over long distances, our high-head pumps are up to the task.

The unique design of our high-head pumps allows them to generate high head and pressure while still maintaining a high flow rate, making them ideal for a wide range of applications including irrigation, water treatment, and industrial processing.

Our high-head pumps are also highly customizable, with a variety of options available to suit your specific needs. Whether you require a high flow rate, a high head, or a combination of both, our team of experts can work with you to create a pump that meets your requirements.

The 4-Inch heavy-duty slurry pump by EDDY Pump. Close coupled or flex coupled version pumps available in extra heavy-duty (HD) class. Depending on your needs, all of our pumps can be setup horizontal or vertical.

Our industrial pumps are non-clog pumps with no critical tolerances designed for high solids pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult pumping applications.

In harsh conditions with sand, sludge, rocks, slurry, normal dredge pumps clog, wear and fail more often. This leads to downtime for maintenance, hurting your bottom line. This is not the case with EDDY Pump since we have the tolerance to pump objects up to 12 inches!

Agitator series submersible pump designed for slurry, mud & sand pumping with hard iron adjustable wear parts & bottom side discharge up to 6-inch size.

Constructed for maximum durability, our dewatering pumps are compact and lightweight, built with the contractor in mind. Trash pump with 2", 3" and 4" designs with Honda GX engine.

Constructed for maximum durability, our dewatering pumps are compact and lightweight, built with the contractor in mind. Centrifugal pump with 1", 2", 3" and 4" designs with Honda engine.

The CP 77 sludge pump easily handles water containing 15% solids and particles up to 1" (25 mm) in size. It is suitable for pumping seawater and certain corrosive chemicals.

Easily attaches to pressure washer and turns it into a high output pump. Great for flood clean up, car wash pits, emptying pools or chemical spills (discharge hose sold separately).

Whether you’re transferring waste oil mixtures, bio waste, sewage, mud or lime slurries, there’s one thing you can be sure of, and that’s that you need a heavy duty, high pressure sludge pump. Capable of efficiently handling viscous fluids containing solids, Castle Pumps’ range of slurry pumps has been built up over the years to provide you with a non-clogging solution to your waste transfer applications. Not all pump designs can do the job, but that’s where we are there to help you. Our technical sales engineers are on hand to help you to select the right solution for your requirements.

Our Application Engineers Are Standing By To Help Customers With Their Sludge Pumps For Sale Product Selection. PumpProducts.com Offers Same Day Shipping On All , Parts, Motors & Controls In Stock

We sell Direct to the Consumer, Contractor, Commercial, Industrial and Municipal markets, so you pay less. You can Search our On-Line Pump & Parts Catalog or Call our Customer Support Counter at 800-429-0800.

Hydroman™ Electric Submersible Slurry Pumps with Agitator for Pumping Mud are capable of handling municipal applications for sewage and slight sludges, especially those resulting from residential or refining processes. Submersible Sludge Pump with industrial strength, sludge pumps are a perfect choice when pumping water with a high solids content, up to 80mm diameter such as many types of mud sludge and light slurry. These submersible sewage sludge pumpsare typically used for sewage dewatering, waste water as well as sand, mud/sludge and slurry dewatering, in addition submersible sludge pump can be supplied with integrated agitators these feature is quite useful when handling large concentrations of solids as it"s specifically designed for keeping solids in suspension and as a result maintaining the pump"s inlet unclogged consequently avoiding impeller blockage. Submersible sludge dredging pump can be widely used in industry, mine, agriculture, environment protection, building construction, such as drainage slurry, mortar, wastewater, and sewage containing flocks, paper scraps, mud and sand and other solid particles and available in three phase in both 50 and 60 Hz.

Should the oil water ratio reach a pre-determined ratio a warning signal will be activated, and the pump switched off. (The oil in the chamber should be replaced at regular service intervals.)

The ST-36 sludge vacuum is a great tool for transferring a large amount of water or slurry in a short time. Simply attach the pressure line from a portable power washer or car wash bay. The water flowing through the high pressure nozzle creates a powerful venturi suction that can vacuum up slurry solutions. Debris as large as 3/4" diameter will pass through the casting and out the discharge hose.

Based on clean water, the liquid ratio is about 1:11. If you are using a washer pumping 4 gpm, the output produced is about 44 gpm. Cleaning up chemical spills will not damage your washer pump. Applications may include: removing slurry from car wash pit, flood clean-up, removing rain water from construction site, empty pools, liquid transfer, run-off clean-up, etc.

Mud Pumps come in both electric and gas / diesel engine drive along with air motors. Most of these pumps for mud, trash and sludge or other high solids content liquid dewatering, honey wagon and pumper trucks. Slurry and mud pumps are often diaphragm type pumps but also include centrifugal trash and submersible non-clog styles.

WARNING: Do not use in explosive atmosphere or for pumping volatile flammable liquids. Do not throttle or restrict the discharge. Recommend short lengths of discharge hose since a diaphragm mud pump is a positive displacement type and they are not built with relief valves.

Cyclone feed 8/6 slurry pump Pump for Clarified Juice abrasive slurry pump with motor mud water pump triplex mud pump centrifugal pumps for mud centrifugal chokeless pump Mining...

The Sludge Pump is a great tool for cleaning up water and slurries. Simply attach the pressure line from a portable power washer or car wash bay. The water flowing through the high pressure nozzle creates a powerful venturi suction that vacuums up slurry solutions. Debris as large as 3/4" will pass through the casting and out the discharge hose.