southwest mud pump module factory

The L-shaped two-piece fluid-end was adopted into the market over 35 years ago because it was an obvious improvement over one-piece modules. Since the suction module is separate from the discharge module, it is possible to replace the suction module when it wears out instead of replacing the entire fluid end.

Southwest’s L-shaped fluid-end is manufactured from heat-treated 4130 forgings and equipped with our quick-change valve cover system; our L-shaped modules offer unmatched performance.

The market demand for 7500 psi land drilling has continued to increase and is forecasted to remain strong as drillers and operators seek to complete wells more faster and more efficiently. Southwest Oilfield Products has the expertise and ability to convert existing 5000 psi pump systems with our 7500 psi fluid end upgrade. In addition to replacing the existing valve-over-valve module with our proven L-Shaped design, a typical conversion also includes an upgraded liner retainer system, discharge cross/ strainer, and high-pressure discharge Mud Pump with Southwest L-Shaped Fluid End Modulesmanifold and 7500 psi pulsation dampener.

Updated performance data sheets that reflect the higher working pressures are provided for all upgrades performed by Southwest Oilfield Products. To ensure pump operation integrity, rod load limitations are strictly adhered to.

Premium"s high-strength, triple reduction, forged steel triplex fluid end modules are made from 4130 alloy steel, heat treated for a long working life, machined to perfection and packaged for delivery with anti-corrosion protection. The precision-made jewelry, like the exterior finish, reflects the superior quality inside.

The market demand for 7500 psi land drilling has continued to increase and forecasted to remain strong as drillers and operators seek to complete wells more faster and more efficiently. Premium has the expertise and ability to convert existing 5000 psi pump systems with our 7500 psi fluid end upgrade. In addition to replacing the existing valve-over-valve module with our proven L-Shaped design, a typical conversion also includes an upgraded liner retainer system, discharge cross/ strainer, high-pressure discharge manifold and 7500 psi pulsation dampener.

Direct replacement for the current 7500 psi wide body module (same outside dimensions and same external and internal components except valve cover, bore seal and Falcon spring retainer)

BOMCO/Emsco Mud Pumps:F2200HL, F1600HL, F-1300, F-1600, FB1300, FB1600, F-800, F-1000, F-500, F-350, DB-550, DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700,

Premium"s high-strength, triple reduction, forged steel triplex fluid end modules are made from 4130 alloy steel, heat treated for a long working life, machined to perfection and packaged for delivery with anti-corrosion protection. The precision-made jewelry, like the exterior finish, reflects the superior quality inside.

Manufactured to withstand the toughest drilling and environmental conditions, our K-Series triplex mud pumps are ideal for all drilling applications. This legacy product features a balanced forged-steel crankshaft and Southwest Oilfield Products ‘L” Shaped modules which is essential to minimize wear, noise, and operating vibrations. These attributes are essential when drilling deeper high pressure formations, long laterals and when handling corrosive or abrasive fluids and slurries.

Every American Block triplex mud pump is manufactured and fully load tested before leaving our manufacturing campus, and is available in sizes ranging from 800 HP to 2200 HP. The American Block K1600 HP Mud Pump is also available in a 2000 HP up-grade version, when more HP is needed in the same 1600 HP footprint.

Facing the fiercely competitive market, we take "honesty, truth-seeking, innovation and service-oriented" as our corporate tenet, and through scientific management, we have become a leader in the API Tubing Dp Casing Elevator, driling Electrical Submersible Pump, driling Cryogenic Liquid Tank industry. Our company has an elite team with excellent technology and unity. From product development to shipment, we strictly control every link to make customers satisfied. We actively introduce foreign advanced technology and continuously improve and perfect our products. We abide by the promise to customers and the ethical standards, and we won"t harm the interests of the customers. When you are keen on any of our goods following you view our product list, be sure to feel free to make contact with us for inquiries.

We supply fluid end expendables, which could be interchangeable with international reputed mud pump brand. Like EMSCO, Gardner Denver, National, Ideco and etc.

We always adhere to the core concept of "integrity, pragmatism, and excellence", stick to the business policy of "quality first, service first", and constantly improve innovation capabilities, striving to produce Southwest Mud Pump Spare Parts Fluid End Module that satisfy customers! Our company has always been leading science and technology first, pioneering and innovative business philosophy, attaches importance to product development and innovation. With a team of experienced and knowledgeable personnel, our market covers many countries worldwide.

NexGen Manufacturing & Supply keeps a wide variety of replacement parts in stock for mud pumps, plunger pumps, swivels, top drives, handling tools, and much more! Additionally, we have more than 3,000 prints and drawings of oilfield equipment and

Best-all offers fluid-end modules for the most well-known makes and models of mud pumps in service today. All modules are made using a time-tested, multi-step manufacturing and heat-treatment process that, while costly and time consuming to produce, ensures that we can deliver modules that outperform all competitors in overall life and resistance to cracking and washout.

Our modules feature premium forged-steel construction and are fully interchangeable with standard OEM modules from most major pump manufacturers; however, our modules offer improved performance and durability that results from our specialized heat treatment and machining process. Other extra-value features include tapered-end studs, which promote more reliable engagement and better endurance to repeated change-outs-without the thread damage that eventually affects most standard studs.

We offer valve-over-valve designs and Southwest two-piece L-shaped designs. Valve-over-valve fluid ends are available up to 5,000 PSi, and two-piece L-shaped designs are available in both 5,000 and 7,500 PSi rated versions.

Manufacturer of mud pump systems and premium well servicing equipment. The company designs and produces mud pump products which include fluid end modules, pistons, liners, and other related products used during onshore and offshore drilling of oil and gas wells to major drilling companies across the globe. It"s servicing equipment division focuses on the manufacturing of new equipment used in well completion, stimulation, and intervention such as frac pumpers, coil tubing, nitrogen and snubbing units.