southwest mud pump parts pdf manufacturer

22 4020-73 CYLINDER HEAD STUD (WITH SW PART# HHN1500-8 1-1/2-8 HEAVY HEX NUT) 30 *CONTINENTAL EMSCO STYLE PARTS ARE OPTIONAL ON THIS MUD PUMP SEE PAGE 3 FOR ASSEMBLY DRAWING

Manufactured to withstand the toughest drilling and environmental conditions, our K-Series triplex mud pumps are ideal for all drilling applications. This legacy product features a balanced forged-steel crankshaft and Southwest Oilfield Products ‘L” Shaped modules which is essential to minimize wear, noise, and operating vibrations. These attributes are essential when drilling deeper high pressure formations, long laterals and when handling corrosive or abrasive fluids and slurries.

Every American Block triplex mud pump is manufactured and fully load tested before leaving our manufacturing campus, and is available in sizes ranging from 800 HP to 2200 HP. The American Block K1600 HP Mud Pump is also available in a 2000 HP up-grade version, when more HP is needed in the same 1600 HP footprint.

Manufactured to withstand the toughest drilling and environmental conditions, our K-Series triplex mud pumps are ideal for all drilling applications. This legacy product features a balanced forged-steel crankshaft and Southwest Oilfield Products ‘L” Shaped modules which is essential to minimize wear, noise, and operating vibrations. These attributes are essential when drilling deeper high pressure formations, long laterals and when handling corrosive or abrasive fluids and slurries.

Every American Block triplex mud pump is manufactured and fully load tested before leaving our manufacturing campus, and is available in sizes ranging from 800 HP to 2200 HP. The American Block K1600 HP Mud Pump is also available in a 2000 HP up-grade version, when more HP is needed in the same 1600 HP footprint.

Our MissionSouthwest Oilfield Products (SWOP) is committed to delivering thehighest quality products, on time, and creating positive significantimpacts on our customers projects. We strive to maintain ourinnovative stance in the industry while partnering with our customersto share the focus on generating solutions.

2012 Research and Development of High Pressure High Temperature Consumables 2013 Introduced Module Service Tool Kits Research and Development of Frac Pump Consumables

INNOVATIVE ENGINEERINGImprovements in material technology, failure analysis, machining tolerances,surface finishes, heat treating techniques, surface coatings, forgingtechnology, welding practices and assembly techniques are constantlypursued by our engineering staff for integration into our products. This pursuitcombined with over 65 years of manufacturing expertise places SWOP at theleading edge in mud pump fluid-end and expendables design.

Southwest Oilfield Products utilizes the latest engineering design toolsavailable to employ technological advances into our time-proven productdesigns. Our engineering staff utilizes SolidWorks Premium for 3D CADand SolidWorks Simulation Premium for finite element analysis. We havestrengthened our non-destructive testing techniques and manufacturingmethods through involving our engineers in the hands-on inspection andevaluation of our products.We emphasize a seamless interface between our Design EngineeringDepartment and our Manufacturing Engineering Department. Our designengineers are frequently involved in the shop floor activity. Similarly, ourmachine programmers play a prominent role in product improvements andFinite element analysis of a

HIGH QUALITY FLUID-END COMPONENTSSince 1947, Southwest Oilfield Products,SWOP has been an independent OEMmanufacturer and supplier of qualityfluid-end replacement parts. Below isan illustration of a typical Fluid-Endcomponent offering from SWOP.

Southwest Oilfield Products, has been a pillar in the OilfieldIndustry since 1947. From our Houston based manufacturingfacility, we strive to maintain our legacy by offering the highestquality parts & service the industry deserves.

THE ORIGINAL L SHAPED FLUID-ENDOften Imitated But Never Duplicated, Southwest Oilfield Products 2-Piece LShaped Fluid-Ends Have Become The Recognized Standard.The L-shaped two piece fluid-end was adopted into the market over 35 years ago because it was an obviousimprovement over OEM style (valve-over-valve) modules. Since the suction module is separate from the dischargemodule, it is possible to replace the suction module when it wears out instead of replacing the entire fluid-end.

SWOPs L Shaped Fluid-End Is Manufactured From Heat-Treated 4130 ForgingsAnd Equipped With Our Quick-Change Valve Cover System, Our L-Shaped ModulesOffers Unmatched Performance.Southwests second-to-none manufacturing is backed by the best warranty on the market.

HP QUICK-CHANGE VALVE COVERSouthwest Oilfields HP Quick-Change ValveCovers eliminate the need to replace or repairthe expensive parts of your valve cover assembly.Only Southwest Oilfields HP Quick-Change ValveCovers provide true steel-to-steel tightening andhas the best valve cover seal on the market.Most pumps require no modification to convertto our Quick-Change product. Simply remove allcomponent parts of the old valve cover includingstuds. Southwests assembly kit includeseverything needed for the changeout.

BONDED VALVE AND FULL OPEN SEATSouthwest Oilfield Products full open valve with bonded insert hasreplaced the slip-on insert valves. This design is permanently bonded tothe valve body; it reduces the tendency for fluids to penetrate between thepolyurethane insert and the valve body, thus preventing premature failure.The full open design of the valve seat is far superior to webbed style seats formany reasons:

BullDog PistonIntroduced in 2014, the BullDog piston is engineered forhigh temperature and pressure service (300F / 7500PSI). The BullDog piston is suitable for a wide variety ofdrilling muds including oil, synthetic and water-based.Along with its rugged and reliable design, a special blendof lubricating agents enhances the running life of thispiston. Reducing operating costs in extreme drillingenvironments is a key benefit of the BullDog piston.

Triplex Grayloy LinersFor use in todays higher pressure and faster strokingtriplex pumps, Grayloy liners are made of the highestquality high chrome premium alloy steel. They aremanufactured to provide maximum runs at minimal cost.

Southwest Quick-Change HydraulicLiner RetainerIncreased safety and faster change-outs is the hallmarkof Southwest Oilfields Quick-Change Hydraulic LinerRetention System. Our patented design eliminates theneed for hammers and wrenches without compromisingsealing or alignment of the liner.

HIGH QUALITY CONSUMABLESSouthwest Washpipe And PackingOur premium washpipes are manufactured for all swivelsto precise tolerance with the same superior wear-resistantsurface as the Grayloy piston rod.High-quality fabric and rubber molded wash pipe packingis also available.

Packing And Gaskets For TriplexAnd Duplex PumpsSouthwest Oilfield Products offers a wide range ofgaskets and packing materials for use in drilling pumps.Gaskets are made of various elastomers and rubbersdepending on the application. New high temperatureelastomers are now available.

PISTON RODS AND CLAMPSPiston RodsThe SWOP piston rod incorporates the Grayloy longerwearing surface to provide the best piston rod for yourtriplex or duplex pump.

Southwest Duplex Bonded Fail-Safe PistonThis duplex piston gives excellent service in both oil andwater base muds. The fail-safe fluid expanded lip is notdamaged by high pressure and fast pump strokes.

Southwest Duplex Grayloy Piston RodsHigh quality Grayloy material is used on all Southwestduplex piston rods. This corrosion-resistant, high density,long-wearing surface results in fewer packing changesand longer life for gland bushings and junk rings.

GLOBAL SERVICE SOLUTIONSOnsite Service Solutions Offered (Domestic & International)Our SWOP Field Service Team is committed to providing customers with highly trained personnelwho can thoroughly inspect fluid-ends and troubleshoot mud pump fluid-end issues. Our servicesare designed to provide customers with valuable information about the state of their fluid-endsand fluid-end components including:

Laser Alignment SystemAs part as Southwest Oilfields Service and repair department the Zero-N Laser Alignment System isutilized to provide the most accurate fluid-end alignment service available. The Zero-N Laser is accurateto within 0.001 in both the X and Y axes with a digital readout for consistent, repeatable measurements.The system is lightweight and suitcase portable, eliminating difficult transportation issues. Alignmentinspections can be performed worldwide by our team of trained service technicians.

F550 Service TruckWith the addition of a fully-tooled,heavy-duty service truck, our Southwestservice offerings continue to grow!With a 6,000 lb. lift capacity, onboardwelding unit and pneumatic tool systemthis vehicle is equipped to handle eventhe most challenging, on-site fluid-endprojects.

Manufacture of Mud Pump FluidEnds & Expendables10340 Wallisville RoadHouston, Texas 77013Phone (713) 675-7541Toll Free (800) 392-4600Fax (713) 675-5206

Bell & Gossett Parts List DHP-650-PL Replacement Parts for Hoffman Series VBF & Hoffman Series HBF Boiler Feed Units SERIES VBF & HBF Index How to use this Parts List...Page 3 30 VBF (Part number 161024

: R909401762 : VERSTELLPUMPE A4V-125 HD *G* 1 R909400454 ROTARY GROUP L 2 R909414470 HYDRAULIC CONTROL L 3 R909080279 PORT PLATE WITH VALVES L 4 R909400395 INTERNAL GEAR PUMP L 6 R909401736 CONTROL MODULE

IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series

PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...

40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3

Service Data Vickers Piston Pumps PVH131/141 Variable Displacement Piston Pump - 11 Design Revised 05/01/97 M-2209-S Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque

Trash Pumps Models: 56200, 562000, 56201, 562001, 56300, 563000, 56301, 563001 Specifically designed pumps for heavy duty applications Handles solids with eas and simple to open and clean Standard roll

01 Carburettor - oil pump 02 Drive shaft 03 Head - piston 04 Primary gear shaft 05 Gearbox driven shaft 06 Selector 07 Clutch 08 Clutch cover 09 Right crankcase 10 Left crankcase 11 Ignition unit RS 50

Medium Pressure Diaphragm Pumps Installation, Operation, Repair, and Parts Manual Description Form L-1382 (10/15, Rev. D) California Proposition 65 Warning -- This product and related accessories contain

AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br

www.cranepumps.com Parts for Fig. 4001 Bulletin Item No. Name of Part Item No. Name of Part Item No. Name of Part 1 2 6 9 11 *13 *16 17 *18 19 24 *29 32 37 40 46 Casing Impeller Pump Shaft Suction Cover

GARDNER DENVER 3-1-541 Rev D April, 2005 HD-2250 WELL SERVICE PUMP POWER END PARTS LIST ECN 1025185 MAINTAIN PUMP RELIABILITY AND PERFORMANCE WITH GENUINE GARDNER DENVER PARTS AND SUPPORT SERVICES Gardner

INSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS SETTING UP THE PRESS FOR OPERATION For shipping convenience, the gauge, pump handle, hoist crank, screw nose and base angles

Spicer Tandem Axles Illustrated Parts List AXIP0085a January 1994 Single Reduction, Dual Range, & Double Reduction Addendum 461, 462, 463, 521, 581 46,000-65,000 lbs Introduction Single Reduction w/wheel

MUD PUMP EXPENDABLES Oilman Building 1020, ZOBON-MOHO business park, 999# Wangqiao Road, Pudong Shanghai,P.R.Of China Tel:+86-21-5880680 Fax:+86-1-5880690 Email: sales@oilmangroup.com Http://oilmangroup.com

Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX

Model: VE-17DS Lista Części Polish Spis Treści Handle 3 Base 5 Wiring - Wear and Tear parts 7 DF100-A Foam Generator art no. 50000055 9 Handle VE02 3 Handle VE02 4 Poz Numer katalogowy Iloś Opis 1 VF40104EU

SUNNDA CORPORATION Boost Your Bottom Line! Mud Pump Parts & Expendables Sunnda Corporation 4543 Brittmoore Road, Houston, TX 77041 USA Phone: +1-713-849-5678 Fax: +1-713-849-5687 E-mail: sales@sunnda.com

Parts Manual Ersatzteil Liste PL92-280 HT3 series Peck Feed Drills, with Equal Drill Time HT3 SERIES PECK DRILL HT 3 C 005 S E 40 RPM Family Spindle B = 1/2-20 Male Thread, Jacobs Chuck C = 3/8-24 Female

PARTS MANUAL Model EH12-2 ENGINE PUB-EP5713 Rev. 7/99 940 Lively Blvd. Wood Dale, IL 60191 Phone: 630-350-8200 Fax: 630-350-8212 e-mail: sales@robinamerica.com www.robinamerica.com Copyright 1999 Robin

Instructions Instructions The Parts in this section of the manual are listed by Item Number, Part Number, Description and Quantity. The Item Numbers are in a circle with an arrow pointing to the specific

C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 2 CONTENTS-ENGINE ENGINE GROUP ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP FRAME GROUP... 5 4 ENGINE PARTS LIST... 9 5 FRAME PARTS LIST...37 1 ABOUT THIS PARTS

Karcher Model: K 620-M * ( 59556440 ) - Parts Section:1.1 TOP PART Page 1 of 18 1 50346460 1 STRAP 2 63031250 6 SCREW 3 50670230 1 COVER 4 63031940 2 SELF-TAPPING SCREW 5 50309650 1 COVER 6 50635710 1

Pump ED 101 Positive Displacement Pumps Part I Reciprocating Pumps Joe Evans, Ph.D http://www.pumped101.com There are many pump designs that fall into the positive displacement category but, for the most

Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > GOKART > BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM) BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)

11/99 PARTS MANUAL PMRC22EN.A99 CUTTER-CRUSHER RAMMER RC 22 SERIAL NO. RC22BC0015-UP RC22RC0021-UP TABLE OF CONTENTS 1. Cylinder RC 22.......................................................... 4 2. Hydraulics

HC-3000 SERIES RAKE Parts Breakdown 1 SPRING TOWER PARTS PAGE 4 RAKE WHEEL AND ARM PARTS PAGE 8 PIVOT PARTS PAGE 6 6 2,3,4 23 21 7 22 24 HUB & SPINDLE PARTS 8 THRU 20 HYDRAULIC PARTS PAGES 10 AND 12 1

Section: MOYNO 500 PUMPS Page: 1 of 8 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS Mechanical Seal Models Packing Gland Models MODELS DESIGN FEATURES

Spare Parts Program Parts, Consumables & Accessories TABLE OF CONTENTS Program Introduction 3 Body 4 5 Boom 5 6 Hydraulic 6 Lights & Accessories 7 Tubes, Nozzles & Hose Fittings 8 11 Vacuum 11 Water 12

BOWIE PUMPS OPERATION - MAINTENANCE PUMPING PRINCIPLE: The meshing owieeof the gears cause a slight depression, with the resulting enmeshing of the gears causing a vacuum drawing the fluid being pumped

Automotive Corporation TC 170 & TC 170 PD TRANSFER CASE PARTS MANUAL Fabco Automotive Corporation, Livermore, CA Ph:(925) 454-9500 Fax:(925) 454-9501 1-(800) 967-8838 www.fabcoautomotive.com VII. PARTS

MDTN & MTDN0 SERVICE PARTS This parts list contains the service parts and wiring diagrams for this model. Check the model number of the machine requiring the parts to be sure that this is the correct parts

Ingersoll-Rand Company 800-B Beaty Street P. O. Box 1803 Davidson, NC 28036 1-800-AIR-SERV (1-800-247-7378) www.air.ingersoll-rand.com PARTS LIST T30 MODEL 2545 TWO STAGE INDUSTRIAL AIR COMPRESSOR Ingersoll-Rand

Parts Lists - DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PR... Page 1 of 25 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR125 and DR150 Hensim Dirt

Redi-Flo2, 2 Environmental Submersible Pumps MP1 Submittal Data QUANTITY TAG NO. MODEL NO. GPM FEET LEAD LENGTH COMMENTS Technical Data Motor Type: Water-Filled, variable speed submersible Maximum Fluid

APPLICATIONS Specifically designed for: Homes Farms Cottages Booster service SPECIFICATIONS Pump: Pipe connections: 1¼" NPT suction, 1" NPT discharge, 1" NPT drive (pressure) Pressure switch: AS4 preset

Service Data Vickers Piston Pumps Low Noise Industrial Piston Pump PVQ 40-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 PVQ 45-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 C, CM Compensator

P498-2 For Model: NL498D2 PARTS CATALOG Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to

Operations & Maintenance Manual Weatherford MP10 Mud Pump Model MP10 Triplex Mud Pump The Weatherford Model MP10 is a single acting triplex mud pump rated for 1000 HP in oilfield drilling applications.

OP300S / OP350 2:1 RATIO TRANSFER PUMP OPERATING MANUAL WITH PARTS IDENTIFICATION Copyright 2013 International Pump Manufacturing, Inc. This manual contains IMPORTANT WARNINGS and INSTRUCTIONS. Read and

Parker Piston Pumps Otsego Core Competency... Piston Pumps PAVC Series : 4 displacements from 33-100 cc/r, 207 Bar, 3000 RPM PVP Series : 9 displacements from 16-140 cc/r, 250 Bar, 3000 RPM PV Plus : 12

Automated Lubrication Systems Parts & Accessories (Truck and Trailer) Groeneveld USA, Inc. 2150 S. Central Expy. Suite 200 McKinney, TX 75070 Tel: 800.586.7283 Fax: 330.225.5213 Groeneveld USA, Inc. 2150

Model: VE13 Lista Części Polish Spis Treści Handle 3 Base 5 Wiring - Wear and Tear parts 7 DF100-A Foam Generator art no. 50000055 9 RECOMMENDED SPARE PARTS 13 Handle VE02 3 Handle VE02 4 Poz Numer katalogowy

7 Carburetor CA Carburetors 7 Carburetor Tech Tips Parts Illustration & Factory Carb See: Web/TechTips/Carb/AUC429 SU Factory Spec Sheet Tech Tips Specs 7 Carburetor Carb Sets Complete 7 Carburetor CA010

OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product

HAND PALLET TRUCK Lift-Rite Before you Order: To ensure that you get the correct parts, be certain whether your L-50 pallet truck is a standard model or one of the loweredheight models (MINI or CHEP).

DR125 / DR150 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55 CYLINDER HEAD ASSY. 1 125-001 883099006937 CYLINDER HEAD COVER 1 1 2 125-002 883099006944 BOLT M6X28 2 3 3 125-003 883099006951

Operating Instructions Parts List Manual Scissor Lift Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Scissor Lift. Thank you for using this hand scissors

-J0 REV. 0-0-0 DYNA RIDER FOOTBOARD KIT GENERAL Kit Number 000 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English

Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47

Pumping Systems, Intensifiers, Gas Boosters and High Pressure Generators High Pressure Equipment Company produces a number of components and systems for general industrial, elevated pressure applications.

Parts Ultra 395/495/595t Ultra Max II 490/495/595t 309675V EN 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure 0 VAC Type Stand Series Lo-boy Series Hi-boy Series Ultra 395t 2339 B 233961 B 233962

Model 62A MODEL 41A MODEL 44A AURORA 40A/60A Series SINGLE STAGE END PUMPS www.aurorapump.com SINGLE STAGE END PUMPS AURORA 40A/60A Series Single Stage End Suction Pumps Capacities to 4500 G.P.M. (1022

just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,

Table of Contents Overview 1 Pump Disassembly 2 Control Disassembly / Reassembly 7 Pump Reassembly 13 Adjustment Procedures DR Control 19 Adjustment Procedures DRG Control 20 Adjustment Procedures DFR

Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm

OP232-INST 2:1 RATIO TRANSFER PUMP OPERATING MANUAL WITH PARTS IDENTIFICATION IPM INC. Manufactured by International Pump Manufacturing, Inc. Covers models: OP232C, OP242CD and OP242A. Manual Number: MOP232062008

Always place the pump as close to the liquid to be pumped as possible. Keep the suction line short and with few bends. Keep the pump and engine on a level foundation. A poor foundation and a heavy suction

PM 2 AIR OPERATED OIL PUMPS AND KITS PM 2 Oil pump, pressure ratio : 0 Double acting air operated pumps for transferring lubricants and other non-corrosive fluids. Pump includes bung adapter. New Model