steam engine made from mud pump liners brands

Some of our largest competitors use a cheaper alumina-ceramic sleeve to make their liners. Although these liners last a little longer than standard chrome-iron liners, they only last about half as long as zirconia-ceramic liners. Our liners are made from zirconia-ceramic material in order to provide the longest life and best wear performance.

Lake Petro provides high quality Mud Pump Parts including Mud Pump Liners, Mud Pump Fluid End Module, piston, Valve and Seat etc. With more than 10 years of experience in the oil and gas industry, we are dedicated to help and support our loyal clients with the most cost-effective and quality Liners and Pistons. We also provide mud pump price and mud pump for sale.

We offer Liners with Ceramic (Zirconia and Aluminium oxide) and Steel (Metal and Bi-metal) materials for all common brands of the mud pump and triplex mud pump.

Bi-metal liners (double metal liners) are made of forged steel shell and wear-resistant sleeve of high chromium iron. In the production process, the size accuracy should be strictly controlled, which can ensure that they can be easily and stably installed. The inner sleeve with high finish and hardness is wear-resistant, corrosion-resistant and has a long service life. The bi-metal liners are suitable for a lot of bad working conditions. Its service life is more than 800 hours.

Ceramic Liners are made of a ceramic inner sleeve and a forged steel outer shell. The service life of ceramic liners is about 4000 to 10000 hours, the minimum time is at least 2000 hours, which is a lot more than bi-metal liners. Because of the phase transformation toughen technology, the ceramic liners have the features of wear-resistance, erosion-resistance, high-pressure-resistance, high hardness and strength. Zirconia type and Alumina type are common type of ceramic sleeve. Compared with Alumina type, Zirconia type liners have better toughness properties and a much longer service life. Piston wear and water consumption for lubrication can be reduced as well.

Seal Rings for Liner packing are also important. Liner Seal Rings is designed and made with hard corner which is an integral part of seal rings and soft nitrile element rubber center. We could provide reliable liner Seal Rings for our customers could order them at the same time.

All Lake Petro liner products are interchangeable with O.E.M. products. Meanwhile, we provide customized Liners according to drawings. Our liners, also with our other mud pump spares, are supplied for use in Honghua, F-Series, Bomco, Emsco and National lines of triplex drilling pumps. Let Lake Petro be your one-stop shop for your whole fleet of pumps. Please refer to “Suitable Pump Models” Lable for more details.

Triplex: This mud pump is used for drilling applications needing high pump pressure. This model works by decreasing the working fluid volume being discharged to generate pressure for producing the flow. There are three pistons in the triplex pump, with the middle piston generating more pressure on the crankshaft. High piston load can lead to excessive pressure and crankshaft failure if the components are not properly sourced.

Quintuplex:Quintuplex mud pump is perfect for pumping fluid at the time of drilling operations. It works as a continuous duty return piston. This is used in terms of its external bearings to provide crankshaft support to ensure the proper functioning of the sheaves.

Duplex: These mud pumps ensure that the mud circulation reaches the well"s bottom from the mud cleaning system. Duplex pumps have binocular floating seals as well as safety valves.

Saigao offers high-quality OEM mud pump spares, consumables, expendables and spare parts. Our mud pump parts are made with the highest standards of quality, offering competitive pricing and exceptional durability.

ASSIUT, EGYPT – Orascom Construction PLC (OC:NASDAQ Dubai), one of the top ten engineering, procurement and construction contractors in Africa, recently commissioned a custom-built radio remote controlled Mud Cat MC 25EC E-Series dredge at Assiut Supercritical Steam Power Station in Assiut, Egypt. Assiut Supercritical Steam Power Station is a 650-megawatt power station located within the vicinity of Al Walidya Power Plant, in Assiut governorate. Orascom’s scope at the plant was all the mechanical works and Doosan installed the power turbines. The electric powered Mud Cat dredge will perform routine maintenance on the power plant intake which is fed directly from the Nile River. EDT won the order in a highly competitive international tender and has successfully commissioned over a dozen Mud Cat dredges in Egypt for the power, water and wastewater industries. Mud Cat’s local partner, Sadco, has been instrumental in bridging our technology with market opportunities.

The MC 25EC E-Series dredge, a proven system successfully supplied to Egypt on past international tenders, was custom designed with a 12.2m (40 ft.) dredging depth utilizing a low-turbidity 2.7m (8 ft. 10 in.) horizontal auger cutterhead. The cutterhead was equipped with four liner protection wheels to protect the concrete lined intake canal. The Mud Cat’s cutterhead creates a smooth even bottom profile that maximizes each cut without creating craters or ridges like hanging pump dredges. Additionally, the MC 25EC was designed with a cable drive traversing system with custom made recessed anchor points that allowed the dredge to achieve maximum coverage in the area of the intake without creating dead zones where material can accumulate. Mud Cat’s AutoSenseTM technology was incorporated into the traverse system which allows the dredge to get to the end of the cut and automatically reverse to the starting position for the next cut.

“We are very pleased that Mud Cat was selected for the Assiut Supercritical Steam Power Station project. Moreover, we really enjoyed meeting Orascom’s team in Cairo. This is not the first time we worked with Orascom on dredge deliveries for Egypt. They are a world class company with very talented team members,” said Ryan Horton, Vice President EDT.

The design process included an extensive submittal process that required multiple EDT staff members attention. The scope of detail required by Orascom included an extended dredge ladder to ensure maximum reach and dead zone prevention, recessed anchor points, shore power plug-in, NEMA 4X enclosure, custom dredge transport trailer, and discharge port on the canal wall. Additionally, Mud Cat’s floating discharge hose with integrated power cable design eliminates multiple float lines which can obstruct the dredging process.

“We have provided many systems based off the Mud Cat MC25EC platform for power plants across the region. Engineers and constructions companies know and trust the Mud Cat brand of electric horizontal auger cutter dredges,” said DuWayne Richert, Regional Sales Manager.

Due to the Covid-19 pandemic the factory acceptance test (FAT) was performed by Bureau Veritas instead of Orascom. Once the dredge arrived on-site, EDT Field Service Technician, Rob Carufel, flew to Egypt for classroom and on-site training of the operations staff at the plant from July 19th to August 1st.

For more information on Mud Cat standard or custom built auger cutterhead dredges please contact Ryan Horton at rhorton@imsdredge.com or 913-642-5100. Visit Mud Cat on the web at www.mudcatdredge.com.

The 2,200-hp mud pump for offshore applications is a single-acting reciprocating triplex mud pump designed for high fluid flow rates, even at low operating speeds, and with a long stroke design. These features reduce the number of load reversals in critical components and increase the life of fluid end parts.

The pump’s critical components are strategically placed to make maintenance and inspection far easier and safer. The two-piece, quick-release piston rod lets you remove the piston without disturbing the liner, minimizing downtime when you’re replacing fluid parts.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

TR provides high quality Mud Pump replacement parts including Mud Pump Liners, Mud Pump Fluid End Module, piston, Valve & Seat etc. We are dedicated to assisting worldwide clients with most cost-effective and quality guaranteed mud pump liners, pistons and other mud pump replacement parts. Reducing the mud pump production cost is our priority so that significant saving can be achieved for our valuable clients and end users.

TR liners offer both ceramic mud pump liners and high-chrome mud pump liners (bimetal liner) with excellent resistance to abrasion, erosion and corrosion for most mud pumps in worldwide. Advanced anti-wear measures are adopted and highest-grade materials are selected in our mud pump liners production to increase their service life, which can reduce our clients’ investment cost of the project, and improve their production efficiency.Replacement Mud Pump Liners for Gardner Denver PZ 6/7/8/9/10/11

TR provides a wide series mud pump liners for all major brand mud pumps. We also offer custom design-built service per our clients’ drawings and specifications

TR also offers high quality replacement parts for all major brand mud pumps including valve module, piston/extension rods, pistons, valves and seats etc.

Editor"s Note: This is the second of five parts of our feature, The History of Pumps. This timeline was developed through research, credible sources and the knowledge of friends in the industry, The history of pumps is long and illustrious. This account represents highlights of some of the major historical and technological developments. We welcome your contributions.

200 BC Greek inventor and mathematician Ctesibius invents the water organ, an air pump with valves on the bottom, a tank of water in between them and a row of pipes on top. This is the principal design that is now known as the reciprocating pump.

200 BC Archimedean screw pump is designed by Archimedes is considered one of the greatest inventions of all time and is still in use today for pumping liquids and granulated solids in both the industrialized world and in the third world—where it is a preferred way to irrigate agricultural fields without electrical pumps.

1475 According to Reti, the Brazilian soldier and historian of science, the first machine that could be characterized as a centrifugal pump was a mud lifting machine that appeared in a treatise by the Italian Renaissance engineer Francesco di Giorgio Martini.

1588 Sliding vane water pump technology is described by Italian engineer Agostino Ramelli in his book “The Diverse and Artifactitious Machines of Captain Agostino Ramelli,” which also included other pump and engine designs.

1636 Pappenheim, a German engineer, invents the double deep-toothed rotary gear pump, which is still used to lubricate engines. This gear pump made it possible to dispense with the reciprocating slide valves used by Ramelli. Pappenheim drove his machine by an overshot water wheel set in motion by a stream and was used to feed water fountains.  The emperor Ferdinand II granted him a “privilege” - the equivalent of a patent - in respect of this invention.

1675 Sir Samuel Moreland—an English academic, diplomat, spy, inventor and mathematician—patents the packed plunger pump, capable of raising great quantities of water with far less proportion of strength than a chain or other pump. The piston had a leather seal. Moreland"s pump may have been the first use of a piston rod and stuffing box (packed in a cylinder) to displace water.

1782 James Watt—who invented the steam engine"s connecting rod crank mechanism, which made it possible to convert the piston"s reciprocating motion into rotary motion—designs an oscillating piston machine in which a wing-shaped rotary blade made a near complete revolution uncovering inlet ports in a chamber separated by a curved radial wall.

1790 Briton Thomas Simpson harnesses steam power to pumping engines for municipal water applications and founds the London company Simpson and Thompson Co. (predecessor to Worthington Simpson).

1845 Henry R. Worthington invents the first direct-acting steam pumping engine. Worthington Pump designed its first products to power canal boats and U.S. naval vessels. Worthington later pioneered pump designs for boiler feed, oil pipeline and hydro-electric applications.

1851 John Gwynne files his first centrifugal pump patent. His early pumps were used primarily for land drainage, and many can still be seen today in pump house museums. They were usually powered by Gwynnes" steam engines. By the end of the 19th century, Gwynne was producing pumps of all sizes to cover all industrial applications, from small electric pumps to those rated at 1,000 tons per minute. His company had also begun to produce scientific pumps, e.g., porcelain pumps for chemical works. In the 1930s they were producing almost 1,000 different models.

1860 Adam Cameron founds the Cameron Steam Pump Works, and becomes another pioneer in reciprocating steam pump engines. Like Worthington, Cameron"s first products were used to power merchant marine and U.S. naval vessels. Cameron pumps were later applied in water resources, oil pipeline and refining and boiler feed.

1886 Jens Nielsen, founder of Viking Pump Company, invents the internal gear pumping principal while designing a pump to remove excess water that was seeping into his limestone quarry from a nearby creek.

1886 United Centrifugal Pumps is incorporated. It becomes the world"s foremost supplier of high-pressure crude oil and refined product pipeline pumps.

1899 Robert Blackmer invents rotary vane pump technology, a pump design that was an important departure from the old gear principle and predecessor to today"s sliding vane pumps.

1902 Aldrich Pump Company begins manufacturing the world"s first line of reciprocating positive displacement pumps for steel mills and mine dewatering.

1908 Hayward Tyler creates its first electric motor for use under water and develops the wet stator motor for use as a boiler circulation glandless motor-pump.

1911 Jens Nielsen builds the first internal gear pump, founding the Viking Pump Company. The Viking Rotary “Gear-Within-A-Gear” pump (the first of its kind) is placed on the market.

1912 Durion, a universally corrosion-resistant material, is invented by the Duriron Castings Company (later known as Durco Pump) and is applied to process equipment.

1915 Albert Baldwin Wood invents the Wood trash pump. Wood spearheads the reclamation from swamp and the efforts to develop much of the land now occupied by the city of New Orleans. Some of Wood"s pumps have been in continuous use for more than 80 years without need of repairs. New ones continue to be built from his designs.

1916 While Armais Sergeevich Arutunoff first invented submersible pumps in Russia in 1916, their use in the United States did not begin until the 1950s.  Arutunoff first designed his pump for use in ships, water wells and mines. He altered the design to work in oil wells. Thanks to further refinements to Arutunoff"s design, there are more types of submersible pumps, allowing use in other applications such as pumping drinking water, creating fountains and pumping wastewater.

1921 Harry LaBour founds LaBour Pump Company. A pioneer in the development of pumps for the chemical industry, LaBour developed corrosion-resistant alloys to incorporate into his pumps. Until his time, sulfuric acid was always pumped with lead pumps, the only known material that could handle certain concentrations of the acid.

1921 Jeumont-Schneider begins manufacturing water and slurry pumps in Jeumont, France. It later develops solids-handling pumps and segmental ring section multistage pumps.

1924 Durco Pump introduces the world"s first pump specifically designed for chemical processing. It would go on to establish undisputed global leadership in ANSI pump design.

1926 O.H. Dorer receives a patent for the first inducer, which reduces the required NPSH. Inducers did not become incorporated into standard pump lines until the 1960s.

1929 Pleuger incorporates in Berlin, Germany. Its first offerings are submersible motor pumps for dewatering in the construction of underground railways and subways. Pleuger pioneers the first successful application of submersible motor pumps in offshore service.

1929 Stork Pompen produces the first concrete volute pump for drainage, integrating the pump housing in the civil construction of the pumping station.

1930 While inventing a compressor for jet engines, aviation pioneer René Moineau discovers that this principle could also work as a pumping system.The University of Paris awarded Moineau a doctorate of science for his thesis on “the new capsulism.” His pioneering dissertation laid the groundwork for the progressing cavity pump.

1933 The original version of the Bush Pump is designed as a closed-top cylinder pump. In 1960 the design was modernized. The base of the well was from then on bolted to the well casing and got its current name, The Zimbabwe Bush Pump, the National Standard for hand pumps in Zimbabwe. After Zimbabwe"s independence in 1980, the government creates its own modernized version of the pump, B-type Zimbabwe Bush Pump. The pump is today regarded as a national treasure. In 1997, it was pictured on a postal stamp.

1933 J.C. Gorman and Herb Rupp introduce a pump with a “non-clogging” feature. It outperforms any other self-priming centrifugal pump previously invented. The company Gorman-Rupp is established.

1936 Robert Sheen invents the metering pump. The core of his invention was a method of controlled volume that was inherent to the pump. The first pumps were assembled in the basement of his father, Milton Roy Sheen"s, home, where the initial patterns for castings were made.

1937-1939 Smith Precision Products Company (Smith Pumps) designs three pumps, two of which (models 300 and 200) were specifically designed for LP-gas transfer.

1939 Dorr-Oliver Pump Company develops the Oliver Diaphragm Slurry pump for slurry transfer. Originally designed for mining slurry transfer with their associated acids, it developed into a Primary Sludge Underflow Pump for the wastewater industry starting in the 1970s after the Clean Water Act.

1940 Reuben Smith, of Smith Precision Products Company (Smith Pumps), receives the first approval for an LP-gas pump from the California Industrial Accident Commission. This was for the model 4X pump and the approval was a "suitable for use" certificate.

1942 The Gorman-Rupp team creates the first commercially available solids-handling trash pump to respond to the contractor"s need for a pump to withstand the considerable rigors of pumping out trash-laden septic tanks, cesspools and outhouses.

1944 During World War II, Goulds extra-quiet trim pumps are installed in every U.S. Navy submarine. That year, 157 Goulds men went to war and 157 women took their places on the Goulds manufacturing floor. Goulds earned the prestigious Army-Navy “E” Award that year for outstanding production of war materials.

1947 Flygt"s Sixten Englesson, a master of engineering, develops a prototype for the first submersible drainage pump, which is later known as the “parrot cage,” or B-pump, used in mining for construction.

1948 Smith Precision Products Company receives the patent for the first mechanical seal supplied for liquefied gas transfer pumps. It was first put into production in 1947.

1950  Vanton develops the Flex-i-liner sealless self-priming rotary pump which handles corrosive, abrasive and viscous fluids as well as those that must be transferred free of product contamination.

1954 Smith Precision Products Company (Smith Pumps) begins working with the Underwriters Laboratories to develop their first Standard for liquefied gas pumps, UL-51, which is still in use today.

In 1955, Jim Wilden invented air-operated double-diaphragm pump technology. It had the right air valve and diaphragms needed and was tough and versatile enough to meet the stringent demands of the mining and heavy-construction industries. During the 1980s, Wilden introduced plastic AODD pumps that have the ability to stand up to the harsh operating conditions and corrosive media transferred throughout the global chemical market. Photo courtest of Wilden.

1960s New lines of industrial pumps are developed by Goulds Pumps, including large double suction pumps, higher pressure pumps and non-metallic pumps. In home water systems, the jet water system is improved and a complete line of submersible pumps is completed.

1965 Warren Rupp"s heavy-duty, diverse AODD pump is introduced to the industrial market to address the vigorous demands of the steel mills and other industrial market applications.

Below: Marvin and Kathryn Summerfield founded Cascade Pump Company in 1948. They are pictured here at an industry tradeshow in the early 1950s. Photo courtesy of Cascade Pump Company.

1968 The ownership of Stenberg-Flygt AB is transferred to the American multinational enterprise ITT (International Telephone & Telegraph Corporation). Prior to this transfer, Stenberg-Flygt AB, AB Flygts Pumpar and Flygt International AB are consolidated as a single company.

1980s Gorman-Rupp unveils the nutating pump, a special purpose small pump used in health care applications; additional energy-efficient, self-priming centrifugal pumps; a series of lightweight portable pumps and high-pressure pumps with the first digital-control panels.

1985 Sims manufactures the first structural composite pump, all Simsite Vertical Pit Pump. Sims later won the Innovative Product Award for these products in 1990.

In 1933, J.C. Gorman and Herb Rupp introduced a pump which had a "non-clogging" feature. Their competitors claimed the pump would not work in a savage public awareness campaign to discredit the new design, which resulted in about $100,00 worth of "free advertising." At least one customer was willing to try it. National Ice Company purchased the first pump, and the company Gorman-Rupp was established. Photo courtesy of Gorman-Rupp Company.

1994 Two new major products are introduced by Goulds Pumps, the Industrial Model 3298 Magnetic Drive Pump and the Water Technologies Model GS “Global Submersible.”

1994 Sims receives the honor of approval from the United States Navy for composite centrifugal pump intervals. Simsite was tested and qualified for centrifugal pump replacement parts and was the first composite to be certified.

1994 Baha Abulnaga invents the slurry and froth pump with  a split vane impeller. The split impeller helps to reduce recirculation in slurry pumps by dividing the space between the main vanes without reducing the passageway at the narrowest point, which is the eye of the impeller. In froth pumps, it helps to break up air bubbles that form and tend to block the flow.

1995 Sims manufactures the largest structural composite pumps in the world - two Simsite vertical turbine pumps for Potomac Electric Power Company. They are 40 feet long and 3 feet in diameter.

2006 Sims manufactures the largest structural composite centrifugal impeller in the world. This huge impeller was installed in a cooling tower pump for Puerto Rican Electrical Power Company. It is 50 inches in diameter and consumes 2,000 horsepower.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

DEENPU provides high quality Mud Pump Parts including Mud Pump Liners, Mud Pump Fluid End Module, piston, Valve and Seat etc. With more than 10 years of experience in the oil and gas industry, we are dedicated to help and support our loyal clients with the most cost-effective and quality Liners and Pistons. We also provide mud pump price and mud pump for sale.

We offer Liners with Ceramic (Zirconia and Aluminium oxide) and Steel (Metal and Bi-metal) materials for all common brands of the mud pump and triplex mud pump.

Bi-metal liners (double metal liners) are made of forged steel shell and wear-resistant sleeve of high chromium iron. In the production process, the size accuracy should be strictly controlled, which can ensure that they can be easily and stably installed. The inner sleeve with high finish and hardness is wear-resistant, corrosion-resistant and has a long service life. The bi-metal liners are suitable for a lot of bad working conditions. Its service life is more than 800 hours.

Ceramic Liners are made of a ceramic inner sleeve and a forged steel outer shell. The service life of ceramic liners is about 4000 to 10000 hours, the minimum time is at least 2000 hours, which is a lot more than bi-metal liners. Because of the phase transformation toughen technology, the ceramic liners have the features of wear-resistance, erosion-resistance, high-pressure-resistance, high hardness and strength. Zirconia type and Alumina type are common type of ceramic sleeve. Compared with Alumina type, Zirconia type liners have better toughness properties and a much longer service life. Piston wear and water consumption for lubrication can be reduced as well.

All DEENPU liner products are interchangeable with O.E.M. products. Meanwhile, we provide customized Liners according to drawings. Our liners, also with our other mud pump spares, are supplied for use in Honghua, F-Series, Bomco, Emsco and National lines of triplex drilling pumps. Let DEENPU be your one-stop shop for your whole fleet of pumps. Please refer to “Suitable Pump Models” Lable for more details.

We have the most reliable motor fleet in the industry. During the past 30+ years, we’ve made continuous enhancements based on your feedback and ideas from our experts. Speed up hydrocarbon recovery with faster rate of penetration (ROP), longer runs with greater reliability, and better steering response and hole quality.

Motors are available in tool sizes from 2 3/8 to 12 3/4 in. (60.325 to 323.85 mm) with specific features that can be varied for customized designs. These include rotor-lobe configurations from 1/2 (high speed) to 9/10 (low speed), matched to the use of diamond and ball bearings packages, advanced elastomers, and unique stator designs that deliver power without sacrificing durability. Use this motor in high-temperature holes and with most drilling fluids.

High-performance, water-based drilling fluid systems from Baker Hughes overcome many of the technical challenges that could otherwise restrict your options to oil-based mud (OBM). We engineer water-based muds (WBM) that reduce overall cost and environmental impact.

Whether you’re considering the environment, or the reservoir, or reducing mud losses and improving cement jobs, our proprietary WBM systems maximize clay inhibition, minimize pore-pressure transmission, and, ultimately, achieve rate of penetration (ROP) that makes other mud systems look very conventional.

The PERFORMAX™ system is ideal when you need the highest drilling performance available in WBM. This is the alternative to synthetic-based muds in areas such as deepwater, where extreme performance and environmental concerns and electronic image quality are top priorities.

We can customize the PERFLEX™ high-performance water-based system to focus on only the most critical fluid attributes, such as shale stability or controlling highly reactive clays. This mud system can be created from a variety of high-performance products, all compatible with high-salinity fluids.

When conventional WBM components have already burned up from extreme downhole temperatures, PYRO-DRILL™ WBM is just getting warmed up. We can customize this mud with stable fluid properties under the temperature demands of virtually any application.

An increasing number of fields contain hydrocarbons that are protected by extremely depleted zones. The MAX-BRIDGE™ WBM system can be applied in WBM with unique technology that allows access to those reserves without the pipe sticking and mud losses associated with conventional systems.

We hope to keep in-depth communication with you on the latest developments and best innovations in the field of Triplex Plunger Pump fracturing pump, 2800 Quintuplex Frac pump, 1000 Cementing pump. With a worldwide sales network and fast freight services, we warmly welcome new and old customers to inquire.The the mud pump easy to Install produced by our company adopts modern production equipment and testing machinery, complete quality assurance system and rigorous and scientific management, and adopts foreign raw materials. On the basis of traditional the mud pump easy to Install, it is made with many improvements and meticulous workmanship. We will continue to follow the concept of "science, integrity, fairness, and law-abiding", with a rigorous scientific attitude and modern management, to provide customers with satisfactory and assured products. Hard-working and sincere, we are willing to go hand in hand with our major counterparts and customers to create brilliance together. The company has always been implementing technological innovation, winning by quality, serving the society and returning to nature. Our main objectives are to provide our customers worldwide with good quality, competitive price, satisfied delivery and excellent services. We seek more partners with new ideas and marketing methods, warmly welcome friends from all walks of life to visit, investigate and negotiate business. Our products are manufactured and tested in strict accordance with the standards to ensure that all products are qualified. We recognize that in order to ensure proper business operations and to continuously enhance corporate value, it is critical to implement and maintain a risk management system to address the serious risks that may be faced in business operations.

F series mud pump is characterized by compact structure, small size, good running performance. Can meet the oil field drilling technical requirements, such as pump high pressure, large displacement and so on.The series of mud pumps are widely used in oil and other industrial...

 Piston and piston rod We can provide the piston assy and piston rod for F series,3NB series and other type of mud pump. Piston and piston rod are made of high hardness alloy steel,and they are wear-resistant , anti-corrosive and anti-distortion after heat treatment. The...

Double piston drilling mud pump is a light grouting machine, which is a horizontal double-cylinder double-acting reciprocating piston pump. It is mainly used to inject flushing fluid into the hole during geological drilling.

 MUD PUMP LINER 1. Our mud pump liner is strictly manufactured according to API-7K Standard and passed the ISO9001-2000 international quality system authentication. 2. Our mud pump liner have reached the requirement of OEM products quality. 3. Through continuous development,...

Centrifugal drilling mud pump is a mud pump with centrifugal function. The main features are high pressure, large head, low energy consumption and convenient operation. It is used for geophysical prospecting to provide flushing fluid to the borehole and to provide flushing...

We can provide the mud pump for large output capacity, our products are exported overseas, We focus on product manufacturing, we experience in this aspect , we want to be able to carry with you in China to establish a long-term relations of cooperation.

Geothermal water well drilling mud pump is a mud pump used for geothermal steam and geothermal water drilling. It is an important equipment required for exploration and exploitation of geothermal fluid. The geothermal water well drilling mud pump is equipped with a gearbox or...

We can provide The mud pump for stable performance, high efficiency, Our mud pumps are hot selling overseas, We focus on product manufacturing, we experience in this aspect , I hope you can become a good friend of the cooperation with us

The diesel engine drilling mud pump has compact structure, light weight, small volume and beautiful appearance, and is driven by hydraulic motor, electricity or diesel engine. It has high stability and high pressure.

It is mainly used to supply flushing fluid to the drilling well in core drilling or hole drilling. The pump can discharge not only clear water, but also thick mud. And for the specialty of small external dimension, light weight, the pump is suitable for transportation in...

The company not only strives for perfection in product development, but also actively helps us master professional product knowledge, and we have learned a lot from this cooperation.

Good Piston assy, Flowline Fluid Control And Manifold Products, Cementing Equipment come from high-quality material selection and excellent technical strength. Yukos Petroleum Equipment is professional in offering various quality and low price the mud pump easy to Install. We"re one of the leading China manufacturers and suppliers of various equipment in oil & gas industry, having introduced advanced equipment in our factory. Welcome to buy the famous brands" bulk the mud pump easy to Install in stock form us.