submersible mud pump factories free sample

The DAE Pumps Submersible Slurry Pumps are designed for an extensive range of applications. With their robust designs, submersible slurry pumps move slurry, sand, and other material with ease. Heavy-duty submersible slurry pumps from DAE Pumps are capable of pumping solids up to2112 GPM with as much as 102 HP. DAE Pumps submersible slurry pumps are available in a wide range of models in 3-inch, 4-inch, 6-inch, and 8-inch sizes.

Our non-clogging submersible slurry pumps are the toughest in the industry and have the largest apertures to facilitate the handling of slurry with the most challenging solids. The high-efficiency high chrome agitator lifts up to 2.5-inch settled solids. The robust design uses heavy-duty bearings to withstand shocks and overloads and a double silicon carbide mechanical seal for duty application.

DAE Pumps robust submersible slurry pumps are made to perform. The unique sealing system and modular design make them the most flexible pumps on the market. Easy to use and maintain, these pumps provide the optimum maintenance solution and can be easily fitted at the job site. These heavy-duty submersible slurry pumps offer a motor protection system with a built-in starter and optional automatic level control. The hardened high-chrome impellers and adjustable wear-resistant rubber diffuser feature ensure durability in the toughest environments.

At DAE Pumps, we have a complete range of high-quality submersible slurry pumps made for dewatering and dredging the most abrasive media, like sand, with high solid content in quarries and mining operations. The user-friendly design and easy-to-use submersible sand and slurry pumps are why they are the preferred choice for submersible pumps.

Submersible slurry pumps and submersible sand pumps offer the highest in quality and strength over other submersible pumps. They are capable of moving large amounts of sand and slurry with ease and without clogging. DAE Pumps submersible sand and slurry pumps withstand the abrasive material that passes through them on a consistent basis and provide the power to move the material. The following is to help understand pump specifications for selecting the right submersible slurry pump or sand pump for you. A DAE Pumps representative is also available.

The size of the submersible pump is important when connecting the discharge end. The hose or pipe that connects to the pump should match the discharge or the pump. If fitting an adjustment to the end of the submersible slurry pump, the fitting can only work when goes downward in size, not upward. Typically, the pump size limits the gallons per minute a submersible slurry pump is capable of pumping. The larger the pump size, the more allowable volume, and solids sizes.

The power of the electrical submersible slurry pump is determined by the motor size in horsepower. The more horsepower, the more material it can move (volume), and the higher the head of which it can pump. When moving sand and slurry, it is important to take horsepower into consideration. As sand and slurries can be heavy, this causes friction that slows down the movement of the material. If there is too much friction and the submersible sand pump is not powerful enough to push the sand or slurry, the material will start to settle in the hose or piping, and not deliver to the final destination.

When selecting a submersible slurry or sand pump be sure to understand the volume of the material you are looking to move. Submersible pump specifications are typically based on pumping water. When pumping sand, slurry, and other solids, DAE Pumps industrial slurry pumps move between 15% to 30% solids.  Therefore, the remaining 70% to 85% is water.  While a 100 GPM sand pump can process about 15% material, thus 15 GPM of sand, a 100 GPM slurry pump can process about 30% material, thus 30 GPM of slurry. This all varies depending on how aggressive the operator is with the pump. Ensuring the correct power of a sand pump is essential for delivering sand the distance needed because sand is heavy and settles. Not enough power will leave sand in the hose and backup. Knowing the liquid viscosity is important for ensuring proper pumping. Ask DAE Pumps for assistance with a viscosity test to ensure accurate pump selection.

In addition to the amount of material you pump, you want to make sure there is a consistent inflow of water or fluid replacing liquid and material that is being pumped out for the proper operation. Lack of fluid is never good for submersible pumps.

Here are a couple of equations and examples to help figure out how much material a submersible slurry pump can move and approximately how long it will take to move your material.

The head is the height at which the pump can raise water. The weight of a gallon of water at room temperature is 8.33 lbs. If all that is being pumped is room temperature water, the height a submersible slurry pump could pump that water is the max head stated on the pump specifications. However, submersible slurry pumps and submersible sand pumps are pumping more than just room-temperature water. They are pumping sand, silt, rocks, mud, debris, and other types of slurries. These slurries have a different weight that is more than the weight of water. Thus, the head of a pump that is pumping slurries and sand is going to be less than the stated head on a pump.

The size of solids is that can pass through a submersible slurry pump are typically determined by the allowable area between the pump’s impeller and the volute. Submersible pumps are designed with more or less separation for the type of material they are intended to handle. Those with more separation are submersible slurry pumps because they can process larger materials. The submersible pump with less separation is a drainage pump that does not move many solids.

Your dewatering needs are our top priority. Our electrical submersible pumps support all your dewatering application needs for drainage, slurry, and sludge. Visit our dewatering applications section to learn more about various types of dewatering needs.

The non-clogging Miramar Submersible Slurry Pumps are the toughest and have the largest apertures to facilitate the handling of slurry with the most challenging solids. The high-efficiency high chrome agitator lifts settled solids up to 2.5-inches. The robust design uses heavy-duty bearings to withstand shocks and overloads and a double silicon carbide mechanical seal for duty application. The Miramar Slurry Pumps offer 3-inch, 4-inch, and 6-inch models, with the ability to move up to 2112 GPM.

DAE Pumps Miramar L430 Submersible Slurry Pumps are built to move abrasive materials with solids up to 0.8-inches. With a 3-inch discharge, these slurry pumps process material at 247 GPM up to 47-feet via a 5 HP motor.  This 60Hz pump is available in 460V.

The low-cost DAE Pumps Tampa 337 provides ideal suction and movement of solids up to 1-inch through a 3-inch discharge. The ergonomic Tampa 337 submersible slurry pumps transfer solids and liquids at a flow rate of up to 343 GPM and with 5 HP.  Read More…

DAE Pumps Tampa 355 provides reliable suction and movement of solids up to 1-inch through a 3-inch discharge. The ergonomic Tampa 355 submersible slurry pumps transfer solids and liquids at a flow rate of up to 449 GPM and with 5 HP.  Read More…

The durable and efficient DAE Pumps Tampa 437 provides improved suction and movement of solids up to 1-inch through a 4-inch discharge. The ergonomic Tampa 437 submersible slurry pumps transfer solids and liquids at a flow rate of up to 476 GPM and with 5 HP.   Read More…

The durable and efficient DAE Pumps Tampa 437 provides improved suction and movement of solids up to 1-inch through a 4-inch discharge. The ergonomic Tampa 437 submersible slurry pumps transfer solids and liquids at a flow rate of up to 476 GPM and with 5 HP.   Read More…

3The Lansing 340 submersible slurry pump is solid and easy to move slurry, water, or any other material. DAE Pumps’ heavy-duty, submersible slurry pumps can handle up to 2112 GPM solids. They also have a maximum power output of 102 horsepower. DAE Pumps Submersible Drainage Pumps are available in many sizes, including3-inch,4-inch,6-inch, and8-inch.

The Lansing 340 submersible slurry pump has a 4kW or 5.5HP, and it is non-clogging and can handle the most challenging solids. The high-efficiency, high chrome agitator, is capable of lifting 2.5-inch solids. For duty use, the sturdy design incorporates heavy-duty bearings for shocks and overloads.

The rugged DAE Pumps Miramar L540 Submersible Slurry Pumps process abrasive materials with solids up to 1-inch. These durable slurry pumps with 4-inch discharge move material at 308 GPM up to 57-feet via a 7 HP motor.  This 60Hz pump is available in 460V.

DAE Pumps Tampa 455 provides greater suction and movement of solids up to 1-inch through a 4-inch discharge. The ergonomic Tampa 455 submersible slurry pumps transfer solids and liquids at a flow rate of up to 594 GPM and with 7.5 HP.  Read More…

4The Lansing 460 submersible slurry pump is solid and easy to move slurry, water, or any other material. DAE Pumps’ heavy-duty, submersible slurry pumps can handle up to 2112 GPM solids. They also have a maximum power output of 102 horsepower. DAE Pumps Submersible Drainage Pumps are available in many sizes, including3-inch,4-inch,6-inch, and8-inch.

The Lansing 60 submersible slurry pump has a 6kW or 8HP, and it is non-clogging and can handle the most challenging solids. The high-efficiency, high chrome agitator, is capable of lifting 2.5-inch solids. For duty use, the sturdy design incorporates heavy-duty bearings for shocks and overloads.

The reliable DAE Pumps Tampa 475 provides increased suction and movement of solids up to 1-inch through a 4-inch discharge. The ergonomic Tampa 475 submersible slurry pumps transfer solids and liquids at a flow rate of up to 655 GPM and with 10 HP.   Read More…

Offering the same high-quality, the DAE Pumps Miramar L640 Submersible Slurry Pumps move abrasive materials with solids up to 1-inch. With a 4-inch discharge, these heavy-duty slurry pumps process material at 440 GPM up to 75-feet via a 12 HP motor.  This 60Hz pump is available in 460V.

The heavy-duty DAE Pumps Miramar L740 Submersible Slurry Pumps transfer abrasive materials with solids up to 1-inch. With a 4-inch discharge, the Miramar L740 slurry pumps move material at 616 GPM up to 85-feet via a 15 HP motor.  This 60Hz pump is available in 460V.

The efficient DAE Pumps Tampa 4110 provides enhanced suction and movement of solids up to 1-inch through a 4-inch discharge. The ergonomic Tampa 4110 submersible slurry pumps transfer solids and liquids at a flow rate of up to 819 GPM and with 15 HP.   Read More…

DAE Pumps Miramar L840 Submersible Slurry Pumps move abrasive materials with solids up to 1-inch. With a 4-inch discharge, these reliable slurry pumps process material at 660 GPM up to 98-feet via a 20 HP motor.  This 60Hz pump is available in 460V.

DAE Pumps Galveston 3304 pumps with a combined strainer with a partially open stand and agitator allows for ideal suction and movement of solids up to 1.5-inches with a 4-inch discharge. The Galveston 3304 submersible slurry pumps transfer solids and liquids at a flow rate of up to 792 GPM and with 30 HP.  Read More…

The high power 4-inch DAE Pumps Miramar L940 Submersible Slurry Pumps move abrasive materials with solids up to 1.5-inches. These 4-inch discharge submersible slurry pumps move liquids and solids at 880 GPM up to 171-feet via a 50 HP motor.  This 60Hz pump is available in 460V.

The DAE Pumps Tampa 6110 provides high suction and movement of solids up to 1.4-inches through a 6-inch discharge. The ergonomic Tampa 6110 submersible slurry pumps transfer solids and liquids at a flow rate of up to 977 GPM and with 15 HP.  Read More…

The Lansing 690 submersible slurry pump is solid and easy to move slurry, water, or any other material. DAE Pumps’ heavy-duty, submersible slurry pumps can handle up to 2112 GPM solids. They also have a maximum power output of 102 horsepower. DAE Pumps Submersible Drainage Pumps are available in many sizes, including3-inch,4-inch,6-inch, and8-inch.

The Lansing 690 submersible slurry pump has a 9kW or 12HP, and it is non-clogging and can handle the most challenging solids. The high-efficiency, high chrome agitator, is capable of lifting 2.5-inch solids. For duty use, the sturdy design incorporates heavy-duty bearings for shocks and overloads.

DAE Pumps Tampa 6150 provides enhanced suction and movement of solids up to 1.4-inches through a 6-inch discharge. The ergonomic Tampa 6150 submersible slurry pumps transfer solids and liquids at a flow rate of up to 1136 GPM and with 20 HP.  Read More…

The highly efficient DAE Pumps Tampa 6150-L provides even greater suction and movement of solids up to 1.4-inches through a 6-inch discharge. The ergonomic Tampa 6150-L submersible slurry pumps transfer solids and liquids at a flow rate of up to 1453 GPM and with 20 HP.  Read More…

DAE Pumps Tampa 6220 provides ideal suction and movement of solids up to 1.2-inches through a 6-inch discharge. The ergonomic Tampa 6220 submersible slurry pumps transfer solids and liquids at a flow rate of up to 1268 GPM and with 30 HP.  Read More…

DAE Pumps Galveston 3306 pumps with a combined strainer with a partially open stand and agitator allows for ideal suction and movement of solids up to 2.5-inches with a 6-inch discharge. The Galveston 3306 submersible slurry pumps transfer solids and liquids at a flow rate of up to 1848 GPM and with 30 HP.   Read More…

DAE Pumps Galveston 3506 pumps with a combined strainer with a partially open stand and agitator allows for ideal suction and movement of solids up to 1.5-inches with a 6-inch discharge. The Galveston 3506 submersible slurry pumps transfer solids and liquids at a flow rate of up to 2112 GPM and with 50 HP.   Read More…

DAE Pumps Galveston 3506-H pumps with a combined strainer with a partially open stand and agitator allows for ideal suction and movement of solids up to 1.5-inches with a 6-inch discharge. The Galveston 3506-H submersible slurry pumps transfer solids and liquids at a flow rate of up to 1848 GPM and with 50 HP.   Read More…

DAE Pumps Miramar L1060 Submersible Slurry Pumps are built to move abrasive materials with solids up to 2.5-inches. With a 6-inch discharge, these slurry pumps process material at 1320 GPM up to 108-feet via a 60 HP motor.  This 60Hz pump is available in 460V.

DAE Pumps Galveston 3756 pumps with a combined strainer with a partially open stand and agitator allows for ideal suction and movement of solids up to 1.5-inches with a 6-inch discharge. The Galveston 3756 submersible slurry pumps transfer solids and liquids at a flow rate of up to 2112 GPM and with 75 HP.  Read More…

DAE Pumps Miramar L1160 Submersible Slurry Pumps offer the ultimate performance in slurry pumping. This top-of-the-line pump easily handles the most abrasive materials with solids up to 2.5-inches. This heavy-duty slurry pump with a 6-inch discharge transfers material at 2112 GPM up to 174-feet via a 101 HP motor.  This 60Hz pump is available in 460V.

The Lansing 8150 submersible slurry pump is solid and easy to move slurry, water, or any other material. DAE Pumps’ heavy-duty, submersible slurry pumps can handle up to 2112 GPM solids. They also have a maximum power output of 102 horsepower. DAE Pumps Submersible Drainage Pumps are available in many sizes, including3-inch,4-inch,6-inch, and8-inch.

The Lansing 8150 submersible slurry pump has a 15kW or 20HP, and it is non-clogging and can handle the most challenging solids. The high-efficiency, high chrome agitator, is capable of lifting 2.5-inch solids. For duty use, the sturdy design incorporates heavy-duty bearings for shocks and overloads.

The reliable DAE Pumps Tampa 8220 provides the highest suction and movement of solids up to 1.4-inches through an 8-inch discharge. The ergonomic Tampa 8220 submersible slurry pumps transfer solids and liquids at a flow rate of up to 1664 GPM and with 30 HP.  Read More…

DAE Pumps Galveston 3508 pumps with a combined strainer with a partially open stand and agitator allows for ideal suction and movement of solids up to 2.5-inches with an 8-inch discharge. The Galveston 3508 submersible slurry pumps transfer solids and liquids at a flow rate of up to 2112 GPM and with 50 HP.   Read More…

DAE Pumps Galveston 3758 pumps with a combined strainer with a partially open stand and agitator allows for ideal suction and movement of solids up to 2.5-inches with an 8-inch discharge. The Galveston 3758 submersible slurry pumps transfer solids and liquids at a flow rate of up to 2112 GPM and with 75 HP.  Read More…

The Lansing 8220 submersible slurry pump is solid and easy to move slurry, water, or any other material. DAE Pumps’ heavy-duty, submersible slurry pumps can handle up to 2112 GPM solids. They also have a maximum power output of 102 horsepower. DAE Pumps Submersible Drainage Pumps are available in many sizes, including3-inch,4-inch,6-inch, and8-inch.

The Lansing 8220 submersible slurry pump has a 22kW or 30HP, and it is non-clogging and can handle the most challenging solids. The high-efficiency, high chrome agitator, is capable of lifting 2.5-inch solids. For duty use, the sturdy design incorporates heavy-duty bearings for shocks and overloads.

DAE Pumps Miramar Submersible Slurry Pumps are economical equivalent pumps to Atlas Copco dewatering slurry pumps. The Miramar pumps offer the same high-quality material and performance as Atlas Copco WEDA series. Contact us today to find out more about how DAE Pumps can help you with all your dewatering and material moving needs.

Tapflo submersible pumps are designed for an extensive range of applications. We offer pumps for drainage of flat surfaces, sewages, dewatering of spring, rain and ground water as well as slurries and sludges containing particles. All our submersible pumps provide the performance, reliability, and ease of use you need when pumping fluids mainly consisting of water.

A submersible pump can be used as a fixed solution to empty water when a certain fluid level has been reached or as a mobile and easy-to-use evacuation pump when you need to get rid of unwanted water or slurries:

We offer drainage pumps, sewage pumps, dewatering pumps, and sludge and slurry pumps. Our drainage pumps can drain down to 1 mm water level on flat surfaces and our sewage pumps have a big free passage clearance allowing it to readily dispose liquid containing suspended soft solids and fibrous materials.

When you need to pump spring water, rainwater, groundwater and sand carrying water our dewatering pumps will get the job done and most models are supplied with level control possibilities for economical and automated duty.

When pumping water containing abrasive materials, our sludge and slurry pumps are a great fit, equipped with a semi-vortex impeller and agitator in strong chrome alloy to minimise sludge clogging.

Dewatering pumps for spring water, rain water, ground water, sand carrying water that are widely used in mines and quarries, construction, tunneling, industry processing and hire fleets

Pumps that handles slurry, sludge, bentonite and sand carrying water that are often used in mines and quarries, construction, tunneling, industry processing and hire fleets

... Warman® Q-Series Axial Flow Pumps model QCL model is a horizontal elbow design in fabricated construction with separate pump casing. The pump is designed for continous circulation of ...

... Warman® Q-Series Axial Flow Pumps ensure continuous circulation of abrasive and corrosive fluids. The QCV model is bottom flange designed for direct mounting to a reactor vessel.

The Warman® Q-Series Axial Flow Pumps are designed for continuous circulation of fluids. The QL model is a horizontal elbow design in cast construction.

Premium design white cast iron pump for long service life handling severe slurries. The maintenance-friendly single-wall construction and heavy section white cast iron wet end combined with the cartridge ...

... of the drilling pump and continues to set the standard for durable, high-quality drilling pumps that can withstand the world’s toughest drilling environments. Starting with our PZ7 and rounding out with ...

The V pumps include vertical triplex, quintuplex, septuplex, and nonoplex positive displacement reciprocating pumps with very high efficiency and are offered in a wide range of hydraulic, mechanical, ...

... pneumatic centrifugal pumps provide effective flow rates up to 230 gpm (870.5 lpm). Compact in size, these pumps are useful for dewatering trenches, holes, bilges, pits or other bodies ...

Premium design white cast iron pump for long service life handling severe slurries. The maintenance-friendly single-wall construction and heavy section white cast iron wet end combined with the cartridge ...

To enable maximum versatility and to make a pump that fits with your needs, we offer a choice of gasoline, diesel or electric power. We have 3 types to ...

The HSD pump is a submersible single-phase portable slurry pump. It is equipped with a high-chromium cast iron agitator that assists smooth suction of the settled matters. Though the ...

The KTV-series of slurry-handling type is a submersible three-phase portable slurry pump. It is equipped with an agitator that assists smooth suction of the settled matters. Though the ...

The KTD-series is a submersible three-phase cast iron heavy-duty slurry pump. It is equipped with an agitator that assists smooth suction of the settled matters. The pump parts such as ...

... block construction with a flanged drive, this NEMO® pump is particularly compact and economical. The pump also differentiates itself by means of low investment and operating costs. In ...

... progressing cavity pumps are used in demanding applications for continuous, pressure-stable, gentle and low-pulsation conveyance as well as dosing in proportion to speed in nearly every branch of industry worldwide. The ...

Metso offers a comprehensive line of horizontal slurry pumps to serve a wide range of slurry transport applications. Metsos total solution of pumps, parts and service ...

Turo® Vortex Pumps with a completely open spherical channel. Only 15% of the pumped fluid comes into contact with the impeller. Around the world, thousands of pumps have proven themselves with decades ...

... typical pump for large capacity at low discharge heads (circulation pump with axial impeller). Available in welded or cast construction with reinforcing ribs.

Diaphragm pumps R. 1:1 for transferring, made entirely of die-cast aluminum; they ensure lasting and reliable operation with the most common automotive and industry fluids.

AISI 304 stainless steel submersible pump and single-channel impeller (DW) or vortex impeller (DW VOX) for fixed and mobile installations. The DW - DW VOX electric pump has two ...

Mag Drive series are the first progressing cavity wobble stator pumps to offer magnetic drives. The proprietary, magnetic coupling design performs well in hazardous applications and is effective with difficult-to-seal ...

Compact C Pump delivers reliable performance to the maximum duty requirements of your application in a compact package. Features include suction lift capability up to 28 feet, positive ...

2000 pumps set the standard in positive displacement pumping applications. The proprietary 2000 gear-type universal joint design effectively handles radial and thrust loads for maximum performance and long life.

The TopAir series is one of the most complete lines of Air Operated Double Diaphragm pumps on the market. With eight sizes up to 800 l/min in a wide range of material ...

... domestic and industrial foul water, viscous and corrosive liquids, liquids with fibrous and solid substances, agricultural slurry, as well as generally dirty and muddy water.

... domestic and industrial foul water, viscous and corrosive liquids, liquids with fibrous and solid substances, agricultural slurry, as well as generally dirty and muddy water.

... Flap Valve Pumps are recommended for abrasive slurries, suspended and non-suspended solids and line-size solids. All SANDPIPER® Heavy Duty Flap Pumps are configured with bottom discharge ...

... peristaltic pumps. The Dura range performs exceptionally well with abrasive slurries, dry running liquid feeds, shear sensitive polymers, high viscosity sludge and dosing applications.

Following the highly successful, class leading Verderflex Dura 45 hose pump, Verderflex are proud to announce an expansion to the range, the Verderflex Dura ...

... solid-laden, high S.G. media and where the process line requires good suction lift and may run dry intermittently. Typically, ROLLIT pumps would be installed where there is a need for higher flow, medium pressure requirements.The ...

The development of the E-Series was based on the extensive experiences with the proven pump models. The solid design with distinctive wall thicknesses, ...

... Simplified maintenance and cleaning. The pump is held together by carriage bolts and nuts allowing to accomplish a much faster strip down and rebuild.

The 2,200-hp mud pump for offshore applications is a single-acting reciprocating triplex mud pump designed for high fluid flow rates, even at low operating speeds, and with a long stroke design. These features reduce the number of load reversals in critical components and increase the life of fluid end parts.

The pump’s critical components are strategically placed to make maintenance and inspection far easier and safer. The two-piece, quick-release piston rod lets you remove the piston without disturbing the liner, minimizing downtime when you’re replacing fluid parts.

Submersible sewage pumps type ABS XFP are the best choice for ensuring efficient and reliable pumping in any wastewater pumping station. The submersible wastewater pumps, mainly installed in network pumping stations, are equipped with Premium Efficiency IE3 motors as standard and with the Contrablock Plus impellers. They are designed to process today"s wastewater mainly composed of less water due to low-flush toilets and a range of sanitary items such as wipes, fibre material, etc.

BJM Pumps provides a complete line of standard and specially designed electric submersible pumps – engineered to meet your most stringent requirements. They offer a wide variety of submersible pumps and pump accessories for many different applications. Some of these products include slurry pumps, stainless steel pumps, corrosion resistant pumps, sump pumps, sewage pumps, trash pumps, sludge pumps, non-clog pumps, solids handling pumps, grinder pumps, cutter pumps, shredder pumps, vortex pumps, submersible dewatering pumps, sand pumps, agitator pumps, utility pumps and specialty pumps such as 12 Volt pumps and residue pumps (or Mop-Up-Pump).

BJM Pumps solids handling pumps offer long life and trouble free performance. Cutter pumps, Shredder pumps, Vortex pumps, Grinder pumps – BJM pumps has a pump for your application – everything from industrial, domestic, agricultural, to municipal applications.

Some applications require special pumps requiring handling liquids up to 200 degrees F. This is where the BJM pumps come in to play. BJM’s high temperature submersible pumps are available for hot temperature dewatering, waste water pumping, sump dewatering, solids handling and slurry applications.

BJM Pumps provides a complete line of standard and specially designed electric submersible pumps – engineered to meet your most stringent requirements.

Hot Tags: 1.5kw stainless steel submersible mud sewage waste water pump, China, manufacturers, suppliers, factory, customized, pricelist, quotation, free sample

Tapflo has been a trusted partner on the industrial pump market for over 40 years, offering diaphragm pumps, centrifugal pumps, and other industrial process equipment. The global pump supplier and manufacturer are now broadening its offer with the launch of a new series of submersible pumps designed for an extensive range of applications.

The submersible pump series offer pumps for drainage of flat surfaces, sewage, dewatering as well as sludge and slurry containing particles. All optimised for trouble-free pumping of spring, rain and ground water, water containing suspended soft solids and fibrous materials, and water carrying sand and abrasives.

We are getting more and more questions regarding submersible pumps and the series is a step forward to be an even more complete pump solutions partner. Like our other flow solutions, we can promptly deliver a range of different models from our warehouses and stores worldwide.Håkan Ekstrand, Chief Commercial Officer at Tapflo Group

Tapflo submersible pumps are available in different sizes and capacities, and features models with level control float switch or sensor for economical and automated duty, great motor cooling, vast submersion depth and dual positioning of outlet direction.

We always aim to meet the demands of our loyal customers and to be a one-stop-shop for their pump needs. With the Tapflo submersible pumps series, we hope to reach even higher customer satisfaction with pumps for pits, evacuation, sewage, etc, explains.Mikołaj Laguna-Horodniczy, Global Marketing Manager at Tapflo Group.

Tapflo Group is an independent, Swedish, family-owned, manufacturer and global supplier of Air operated diaphragm pumps, centrifugal pumps and other industrial process equipment.

This major food packager was first introduced to BJM Pumps in 2011 when R.F. MacDonald Co. suggested that the central California facility use a Fahrenheit® Pump for one of their shallow sumps. Read More

In 1992 when Tinker Air Force Base in Oklahoma City initiated what would be the largest groundwater sampling project in U.S. history at the time, they turned to PumpsOK for help. Read More

PumpsOK has a wide variety of deep-well water pumps, submersible turbine pumps, and surface-mounted water pumps from 1 to 100,000 gallons per minute, and well depths to 3000 feet. Materials of construction range from cast iron and bronze to stainless steel and engineered composites. These pumps can be used in a variety of applications from irrigation to water transfer and constant-pressure well pump applications. Read More

The global electric submersible pump market size is poised to grow by USD 1.36 billion during 2020-2024, progressing at a CAGR of close to 4% during the forecast period.

Read the 146-page research report with TOC on “Electric Submersible Pump Market Analysis Report by Application (Offshore and Online), by Geography (APAC, North America, Europe, MEA, and South America), and Segment Forecasts, 2020-2024”.

The market is driven by the surging demand in the agriculture industry. In addition, the increasing use of rig-less electric submersible pumps (ESPs) is anticipated to further boost the growth of the electric submersible pump market.

Baker Hughes, a GE Co. LLC is a US-based company operating in key business segments including oilfield services, oilfield equipment, turbomachinery & process solutions, and digital solutions. The company offers a wide range of electric submersible pump (ESP) systems, including the TransCoil rigless-deployed ESP, CENtrilift PASS slimline, and BHGE CENtigrade elevated temperature production systems.

Sulzer Ltd. is headquartered in Switzerland and offers a wide range of products through its business segments including Pumps Equipment, Rotating Equipment Services, Chemtech, and Applicator Systems. The company offers a comprehensive range of ESPs, such as submersible heavy-duty pumps, submersible light, and medium-duty pumps, submersible drainage center-line pumps (JC and XJC), submersible drainage pumps (J and XJ), and submersible sludge pumps (JS and XJS).

Industrial Pump Rental Market – Global Industrial Pump Rental Market by type (centrifugal pumps, positive displacement pumps, and other pumps), end-users (industrial, water utility, and construction), and geography (APAC, Europe, North America, MEA and South America).