triplex mud pump factory made in china

● The power end of F series mud pump adapts combined lubricating system of forced and splash lubrication, Reliable to lubricate and increased the service life of power end.

Mud Pump is also a popular concept of a wide range of pumps. Different regions, habits, and ultimately the pump type will not be the same. The mud pump described in this entry is a pump type in most sense: Applied mud pumps in the field of oil drilling. In fact, some non-clean water pumps and mud pumps, such as sewage pumps and slurry pumps, are also commonly used when they are called.

Mud pump refers to a machine that transports mud or water and other flushing fluid into the borehole during drilling. Mud pumps are an important part of drilling equipment.

In the commonly used positive circulation drilling, it is to send the surface flushing medium—clear water, mud or polymer rinsing liquid to the bottom end of the drill bit through a high-pressure hose, faucet and drill rod center hole under a certain pressure. Cool the drill bit, remove the cut debris and transport it to the surface.

The commonly used mud pump is a piston type or a plunger type, and the crankshaft of the pump is driven by the power machine, and the crankshaft passes the crosshead to drive the piston or the plunger to reciprocate in the pump cylinder. Under the alternating action of the suction and discharge valves, the purpose of pumping and circulating the flushing liquid is achieved.

Rigs & Rig Components—Complete rig packages, Rigs,Rotary Tables, Hooks and Blocks (Separate and combo), Derricks, Masts, Swivels, Drawworks, Travelling Blocks, Crown Blocks, Sand Pumps, Mud Pumps（F500-F1600), Pump parts.

A solid and compact structure, miniature volume, good and reliable performance, which can meet the drilling requirements such as high pump pressure and big displacements in the oil field.

F series mud pump has a longer stroke and can be operated at a lower stroke, thus improved the water supplying performance effectively and extended the lifetime of expendable parts in the fluid end greatly. The suction pulsation dampener has an advanced structure which is reliable to use and can make the pump realize its best suction performance.

This series mud pump are strictly manufactured according to API Spec 7k “the Equipment Specification of Well Drilling and Repairing”, and are tested accordingly when leave factory.

Mud pump have long stroke range and low numbers of stroke so that it can improve inlet performance of pump and extend life of easy-broken parts, besides, structure of air bag is advanced and reliable.

FYPE Rigid Machinery is one of the leading China manufacturers and suppliers in oil and gas industry. Our company now brings you high quality and competitive price f-series triplex mud pump, drilling mud pump for drill rig for sale, which is widely used in oilfield. And quick delivery is also offered, please be free to contact our factory.

BW160/BW200/BW250/BW450/BW600/BW850 mud pumps are mainly used for irrigation agricultural machinery. for water well drilling, borehole drilling, core drilling, anchor drilling, etc projects

But they are also the main equipment of the geological survey, the main role in the process of core drilling boreholes is to supply fluid (mud or water), making it circulate during drilling and carry rock waste back to the ground, in order to achieve and maintain the bottom hole Clean and lubricate drill bits and drilling tools with cooling.

TypeHorizontal single cylinder double-action reciprocating piston pumphorizontal type single-cylinder double-acting pumphorizontal triplex Reciprocating single-acting piston pumpHorizontal three-cylinder reciprocating single-acting piston pumpHorizontal three-cylinder reciprocating single-acting piston pumpHorizontal double cylinder reciprocating double-action piston pump

The Made-in-China F series mud pumps have same reliable quality and performance as other USA products. Now, F series mud pumps (from F-500 to F-2200) have been produced in batches and sold to many abroad oilfields. Your order for F series mud pumps is cordially welcome.

Huaxin"s export-orientated mud pump parts, including liners, pistons, piston inserts, valve inserts, oil seals, rod packing, fluid ends etc. All of them meet or exceed DIN and API standards and have been exported to U.K., Germany, USA, Canada, Pakistan, Middle East, and so on.

For the successful execution of your projects, it is important to find an appropriate company with a good track record. We help you in connecting with the top mud pump manufacturers and companies and get the best quotation.

The most widely used mud pumps across the industry are Triplex Reciprocating Pumps. Their application has gained immense popularity with time because they are 30% lighter than duplex reciprocating pumps with relatively less operational cost. Moreover, through these pumps the discharge of mud is smooth and they are capable of moving large volume of mud at higher pressure.

Yes. We help you find the best mud pumps irrespective of your location. We simplify your search by connecting you with top mud pump manufacturers and mud pump companies in your location, according to your budget and business requirement.

The most widely used mud pumps across the industry are Triplex Reciprocating Pumps. Their application has gained immense popularity with time because they are 30% lighter than duplex reciprocating pumps with relatively less operational cost. Moreover, through these pumps the discharge of mud is smooth and they are capable of moving large volume of mud at higher pressure.

The different parts of a mud pump are Housing itself, Liner with packing, Cover plus packing, Piston and piston rod, Suction valve and discharge valve with their seats, Stuffing box (only in double-acting pumps), Gland (only in double-acting pumps), and Pulsation dampener. A mud pump also includes mud pump liner, mud pump piston, modules, hydraulic seat pullers along with other parts.

The wearing parts of a mud pump should be checked frequently for repairing needs or replacement. The wearing parts include pump casing, bearings, impeller, piston, liner, etc. Advanced anti-wear measures should be taken up to enhance the service life of the wearing parts. This can effectively bring down the project costs and improve production efficiency.

The Triplex Mud Pump for Oil Drilling is the most popular drilling mud pump used in oilfield drilling. The following models are the most common: F-500 triplex drilling mud pump, F-1000 triplex drilling mud pump, F-1300 triplex drilling mud pump, F-1600 triplex drilling mud pump, F-1600HL triplex drilling mud pump, FB1300 triplex drilling mud pump, FB1600 triplex drilling mud pump, F1600HL triplex drilling mud pump, F2200HL triplex drilling mud pump.

Baoji Baohao is one of the triplex drilling mud pumps manufacturers in China, and also one of the triplex drilling mud pump for oil drilling suppliers of Sinopec & CNPC.

F-500, F800 and F1000 mud pumps has advanced structure, small size, reliable application and easy maintenance and repair. In order to reduce the labor intensity of drillers and facilitate on-site operation, the cylinder liner is designed to be loaded from the top rack on which a small crane is equipped for dismounting and replacing the cylinder liner.

F-1300 and F-1600 mud pumps use API 7# valve; the suction valve and discharge valve are interchangeable. Material for hydraulic cylinder is alloyed steel forging, and three hydraulic cylinders of each pump can be interchanged. Straight through hydraulic cylinder, namely, the structural design of valve-over- valve, has reduced the size of the cylinder but increased its volumetric efficiency. Chemical nickel-plating treatment can be carried out on the surface of the hydraulic cylinder at the request of users, so as to enhance its corrosion resistant property.

All of such components and parts as hydraulic cylinder, cylinder liner, piston, valve body, valve seat, valve spring, sealing element, valve deck and cylinder head of hydraulic end of the F-1300 and F-1600 mud pumps are interchangeable.

We, Baoji Baohao Petroleum Machinery Equipment Co., Ltd are one of the manufacturers for producing the triplex drilling mud pump for oil drilling manufacturers. F-1000 triplex drilling mud pump for oil drilling we manufactured was exported to UAE, Russia, Kazakhstan. And the spare parts for triplex drilling mud pump of oil drilling we manufactured also widely exported to the worldwide, such as UAE, USA, Russia, India, Kazakhstan, Pakistan, Turkmenistan, Algeria, etc.

The leading factor products 3NB, F, Z series drilling mud pump and compound drive groups are mainly used in oil field and geological prospecting for well drilling, well workover, cementing, water shut off, water flooding and sending mud, clay, grout and so on. Among them the 3NB-1300A and 3NB-1600A models are large powers well drilling pumps which are the first to be studied and produced and also make up the domestic blank space. They got the national third prize on progress of science and technology, the first prize on technical progress of Petroleum Industrial Department, and the second prize on the new product of Shandong Province. They were extended the first products which replaced imports by the Machinery Committee of china.

A solid and compact structure, miniature volume, good and reliable performance, which can meet the drilling requirements such as high pump pressure and big displacements in the oil field.

F series mud pump has a longer stroke and can be operated at a lower stroke, thus improved the water supplying performance effectively and extended the lifetime of expendable parts in the fluid end greatly. The suction pulsation dampener has an advanced structure which is reliable to use and can make the pump realize its best suction performance.

This series mud pump are strictly manufactured according to API Spec 7k “the Equipment Specification of Well Drilling and Repairing”, and are tested accordingly when leave factory.

Shandong XinWEI DRILLING EQUIPMENT Co., Ltd. is one of the most well-known manufacturers of trenchless equipment and oilfield equipment in China. After years of unremitting efforts, it has grown into a small but powerful enterprise. Our products cover the entire field, trenchless, from a very small spare part to a very large complete rig system. Our MAIN PRODUCTS are: pump SPARE parts, mud pumps ...