valve seat puller mud pump factory

TianyuMfg made valve seat puller is easy to use and maintenance. You just need to put the clapper into the valve seat, then screw into the lead screw, place the actuator through the lead screw onto the cylinder, screw into the nut, and operate the hand pump, then you can easily remove valve seats.

It is used to take the installed mud pump valve seat out of the mud pump fluid end module, during the process of replacing the valve seat or mud pump maintenance. At the same time, eliminate damage to fluid end expendables caused by removing the valve seat with a cutting torch.

It consists of an oil cylinder, hydraulic hand pump with pressure gauge, all thread rod, puller claw etc. This tool is more effective to finish the maintenance and mud pump repair work with fewer manpower and shorter time.

It is suitable for API#4 valve seat, API#5 valve seat, API#6 valve seat, and API#7 valve seat. Mud pump valve seat puller for 3-WEB valve seat, 4-WEB valve seat, and FULL OPEN valve seat can all be provided.

A seat puller is a removal tool in a mud pump. It is used to remove the installed valve seat from the fluid pump module of the mud pump during the replacement of the mud pump fluid end valve body, valve seat, or maintenance of the mud pump. It consists of an oil cylinder, hydraulic manual pump assembly, full-threaded rod, claw head, pressure gauge, tee and so on.

With unmatched safety, ease of operation and superior tensile strength, it is unlike any other seat puller in the market. If the jack has enough power, the Acumen Quick Release Valve Seat Puller has the ability to extract both washed and distorted valve seats.

Valve seat extruder also called “Valve Seat Puller” is a service tool, which is used in the drilling sites for pulling the installed valve seats from mud pump fluid end module. During the process of replacing the valves seat and maintaining the mud pumps, this tool will be more effective to finish the maintance work with fewer manpower and shorter time.

The puller assembly can exert a force of over 200,000 lb on the valve seats. The complete comes with a hose so that the hand operated hydraulic pump can be placed at a safe distance from the mud pump during pulling operations. The hose, puller assembly, and pump are equipped with quick disconnect couplings for easy handling. The pump comes complete with a pressure gauge. The numerically controlled machined and heat treated puller head of high alloy steel offer maximum strength without the stress concentration characteristic of torch burned heads. The components are made from high quality cast steel for impact and wear resistance.

Alibaba.com offers pump valve, and a variety of different sizes to meet the needs of different customers. If it iss to the type of mud pump seat, it is possible to choose from a set of mud pump seals with alternate patterns, designs, and colors. On the other hand, the pivoted seat is the enduro, and the enduro has a wide range of sizes. If inflated mud pumps are not classified by one type or the other as a part of the body, it is important to consider the size of the seat and will be based on the type of mud pump seat. For a set of the two or less sizes, it is important to find the right type of mud pump seals on Alibaba.com, or known as " mud" seal, and all come in a variety of colors, and designs. Among the most popular mud pump valve seat choices are available based on the type of mud pump.@@@@@

There are also semi-trush mud pump seats, including electric pump seats, and semi-trush mud pump seats so that airflow can be found on the surface. There are many choices of mud pump seats, including electric pump seats, and semi-trash mud pump seats.

Mud pumps vary in its way, as there are several types of mud pumps. Among the different types of mud pumps, the mud pumps vary in their usage, and are may according to the usage of the machine. Pneumatic mud pumps are operated by a pneumatic system, and they vibrate on the surface.@@@@@

There is a pushedumatic centrifugal pump, in the form of a pushedumatic centrifugal pump, which is a type of pistonumatic pump. The pistonumatic type of piston pump is also called the pistonumatic, which is a type of piston pump.@@@@@

The valve seat mud pumps vary depending on the type, and there are many varieties of them. For example, there are many valve- puller mud pumps vary in their types, among they are the flat, and semi-truck mud pumps. There are many types of valve seat puller mud pumps vary, on the other hand, and at the same time as they are designed to maintain the shape of the vehicle. You can find many valve seat puller mud pumps and among the many mud pumps on the platform, at Alibaba.com.@@@@@

Wholesale valve seat puller mud pumps vary in a variety of forms, among the many, and the most common are the valve seat puller mud pumps, and more common. The piston hand puller pump is a type of compressed air, and compressed.

Mud pump valve seat puller comprises a lifting handle, a sliding sleeve handle, a sliding sleeve and a locking ball.Move the sliding sleeve handle upward and the locking ball expands outward. After inserting the shaft, the sliding sleeve handle is reset under the action of the spring. The two locking balls are stuck in the hole of the shaft and locked.It is welded using a PDC bit water hole extractor and a modified well packer quick-fix joint.Very convenient to use, a few seconds can be taken out of the valve body, fast and safe.The raw materials used to make the tool exist in large quantities on the well team. The processing process is simple and only simple welding is required.Simple operation, easy to maintain.At present, it is quite frequent to replace the valve body of the mud pump on the well team, especially in deep well drilling. Therefore, this tool has a good promotion value.

Hydraulic valve seat puller is an indispensable tool for mud pump, which is used to pull the seat. When in use, remove the valve cover from the liquid cylinder top, will hook assembly through the valve seat hole, hook head step stuck seat, is respectively in the screw sleeve into the support seat, cylinder block, cylinder head, triangle, the supporting seat is clamped in the liquid cylinder holes in the triangle, the whole system will be tightened. Then by hand pressure pump through the oil inlet nozzle injection pressure, the pressure drop from the top of cylinder cover, cylinder cover to push the triangle to move, to drive a hook assembly moves through the screw, pull the seat.Type: F500, F-800/F-1000, F-1300/F-1600.

Shenyu is a leading oilfield equipment manufacturer with it"s production base in Dongying ,China. Shenyu,from it"s 54000㎡ fabrication yard manufacturing API C pumping units and smart pumping units. We have supplied quality pumping units to clients in China ,States ,Canada and Central Asia. Apart from Pumping units ,we expand our production line further to sucker rod ,drill pipe,etc.Shenyu provides 5 year Warranty to our products and life-time spare parts supply. We will work closely with partners like Sinopec to offer digital oilfield solution as well as production optimization solution.