weatherford mud pump parts manufacturer

The Weatherford MP Series F & FB style design compatibility means that parts are readily available and fully interchangeable. The MP series mud pumps are based on the industry-recognized, proven and trusted F & FB style mud pump. The MP10 & MP16 Models are always in stock and available for immediate shipment.

The MP Series F style design compatibility means that parts are readily available and fully interchangeable. The MP series mud pumps are based on the industry-recognized, proven and trusted F style mud pump. Any of these parts for the MP Series models below can be purchased from Rig Manufacturing, LLC.

Merit Pump and Equipment Company is your direct Weatherford pump distributor. We offer you the complete line of Weatherford reciprocating pumps, including triplex and quintuplex. We can assist you in all your pump service needs. If you are looking for Weatherford pump repair or supplies, we are the specialist team you can count on every time.

Established in 1990, our facility in Wooster, Ohio includes a complete pump repair service center for your major or minor repairs. We also have a knowledgeable sales department ready to answer any of your questions and supply you with the right Weatherford pump equipment and guidance. Our highly trained specialists will work with you to understand your requirements and match you to a specific pump application. We will size the right pump for you and provide ongoing support.

We are a dependable, experienced Weatherford pump service and supply center, & an official Weatherford pump distributor. We are ready to assist you with any inquiry.

Weatherford T-Series and W-Series are versatile pumps, offered in a variety of material and design options that enable them to be used in a wide range of applications. The Weatherford pumps cast iron power frame ensures robust, fatigue-free durability and excellent wear resistance of moving surfaces. The fluid cylinders are made from either forged 4140 carbon steel, 2205 duplex stainless-steel, or 955 cast nickel-aluminum-bronze materials for increased durability and extended life.

Critical components like the crankshaft, connecting rods, crossheads, and bearings are larger than the industry-standards. This enables them to withstand continuous duty service and harsh operating conditions. Weatherford provides tungsten-carbide, coated plungers as standard.

Weatherford offers optional solid ceramic, or ceramic-coated plungers on request for special applications with pumping abrasive or corrosive fluids for superior durability. The oil trough is designed to evenly lubricate the crossheads and wrist-pin bearings during operation to reduce wear and extend component life. A variety of packing arrangements are available to meet the requirements of any application. Weatherford pumps are API-674 compliant upon request.

The Weatherford W-Series triplex and quintuplex plunger pumps are rated for flows from 6 GPM to as high as 688 GPM intermittent duty (533 GPM continuous duty) with pressure ranges from 600 up to 5,000 PSI.

The Weatherford’s T-Series triplex plunger pumps are smaller pumps rated for flows from 0.50 GPM to 85 GPM intermittent duty (or 56 GPM continuous duty) with pressure ranges from 600 up to 5,000 PSI.

The Weatherford’s T-Series triplex plunger pumps are smaller pumps rated for flows from 0.50 GPM to 85 GPM intermittent duty (or 56 GPM continuous duty) with pressure ranges from 600 up to 5,000 PSI. These pumps are offered with carbon steel or duplex stainless-steel fluid end cylinders.

If you need Weatherford pump services, including repair and equipment, please contact us today. We will provide you with decades worth of guidance on your current Weatherford pump or help with your future product. Our specialists are eager to work with you. Call us today at 800-700-8265.

Mud-Pump Gear Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Weatherford products and services are subject to the Company’s standard terms and conditions, available on request or at weatherford.com. For more information contact an authorized Weatherford representative. Unless noted

otherwise, trademarks and service marks herein are the property of Weatherford. Specifications are subject to change without notice. Weatherford sells its products and services in accordance with the terms and conditions set

Weatherford creates innovative pumps for the oil and gas industry. Focused on ethical and sustainable business practices, Weatherford provides W and T Series power pumps, along with products related to drilling and rigs.

From their W-60 Triplex Pump to their W-375 Quintuplex Pump, this brand offers high performance products which will suit any of your power pump needs. Weatherford’s power pumps are made of materials like bronze and steel, and they are created with harsh conditions and continuous use in mind.

Knighten Industries offers products from some of the most recognizable brands on the market, and this includes Weatherford. Whatever the application, we can help you find the right choice from a versatile range of pumps.

LINER, 4-1/2″, CHROME IRON, FOR HOIST MPLINER, 4-1/2″, CHROME IRON, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1244388000000000001244388

LINER, 5-1/2″, CHROME IRON, FOR HOIST MPLINER, 5-1/2″, CHROME IRON, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1244390000000000001244390

PISTON BHG, 1.625 X 1.50, PLASTIC, PUMPPISTON BUSHING, 1.625 X 1.50, PLASTIC, F/HOIST MUD PUMP, MDL: E-447, MAKE: WEATHERFORD, P/N: 1411483000000000001411483

BONDED PISTON, 4-1/2″, NBR, FOR HOIST MPBONDED PISTON, 4-1/2″, NBR, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317551000000000001317551

PISTON,4″K-SERIES REPLACABLE RUBBER COMPPISTON, 4″ K-SERIES REPLACABLE RUBBER COMPLETE FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317544000000000001317544

PISTON, 4-1/2″, WEATHERFORDPISTON, 4-1/2″ B-SERIES REPLACABLE RUBBER COMPLETE FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317552000000000001317552

PISTON,5″B-SERIES REPLACABLE RUBBER COMPPISTON, 5″ B-SERIES REPLACABLE RUBBER COMPLETE FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317560000000000001317560

PISTON, 5-/2″ B-SERIES REPLACABLE RUBBERPISTON, 5-/2″ B-SERIES REPLACABLE RUBBER COMPLETE FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317568000000000001317568

PISTON, 6″ B-SERIES REPLACABLE RUBBERPISTON, 6″ B-SERIES REPLACABLE RUBBER COMPLETE FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317576000000000001317576

PISTON RUBBER,4″K-SERIES REPLACEMENT KITPISTON RUBBER, 4″ K-SERIES REPLACEMENT KIT FOR HOIST MUD PUMP, MODEL: E- 447, MAKE: WEATHERFORD, P/N: 1317520000000000001317520

PISTON RUBBER, 4-1/2″, WEATHERFORDPISTON RUBBER, 4-1/2″ B-SERIES REPLACEMENT KIT FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317522000000000001317522

PISTON RUBBER,5″B-SERIES REPLACEMENT KITPISTON RUBBER, 5″ B-SERIES REPLACEMENT KIT FOR HOIST MUD PUMP, MODEL: E- 447, MAKE: WEATHERFORD, P/N: 1317524000000000001317524

PISTON RUBBER, 5-1/2″, WEATHERFORDPISTON RUBBER, 5-1/2″ B-SERIES REPLACEMENT KIT FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317526000000000001317526

PISTON RUBBER,6″K-SERIES REPLACEMENT KITPISTON RUBBER, 6″ K-SERIES REPLACEMENT KIT FOR HOIST MUD PUMP, MODEL: E- 447, MAKE: WEATHERFORD, P/N: 1317528000000000001317528

HYD PULLER KIT LESS PULLER HEAD,MDL:E447HYDRAULIC PULLER KIT ( LESS PULLER HEAD) ASSY, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1241141000000000001241141

VLVGUIDE BHG, CARBON STEEL, WEATHERF/DVALVE GUIDE BUSHING, CARBON STEEL, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1259512000000000001259512

LINER RETAINER STUD, LONG, W/ 2 HHNSLINER RETAINER STUD, LONG, W/ 2 HHNS, F/ HOIST MUD PUMP, MDL: E-447, MAKE: WEATHERFORD, P/N: 1230764000000000001230764

CROSS HEAD INSPECTION GASKET, F/HOIST MPCROSS HEAD INSPECTION GASKET, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1230743000000000001230743

REAR COVER GASKET ( PER INCH),F/HOIST MPREAR COVER GASKET ( PER INCH), FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1248661000000000001248661

STABILIER BOLT AND WASHER, F/ HOIST PUMPSTABILIER BOLT AND WASHER, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1775203000000000001775203

PRES RELIEF VLV, 5K 3″ 1502 CONNECTIONPRES RELIEF VALVE, 5K 3″ 1502 CONNECTION FM-IN X M-OUT, MDL: E-447, MAKE: WEATHERFORD, P/N: 1268435000000000001268435

HEX CAP SCREW, 1/2″-13 X 1-1/2″, CSHEX CAP SCREW, 1/2″-13 X 1-1/2″ CS, FOR HOIST MUD PUMP, MDL: E-447, MAKE: WEATHERFORD, P/N: 1236068000000000001236068

HEX CAP SCREW, 5/8″-11 X 2-1/2″, CSHEX CAP SCREW, 5/8″-11 X 2-1/2″ CS, FOR HOIST MUD PUMP, MDL: E-447, MAKE: WEATHERFORD, P/N: 1236076000000000001236076

HEX CAP SCREW, 1/2″-13 X 1-1/4″, CSHEX CAP SCREW, 1/2″-13 X 1-1/4″ CS, FOR HOIST MUD PUMP, MDL: E-447, MAKE: WEATHERFORD, P/N: 1236067000000000001236067

HEX CAP SCREW, 3/4″-10 X 3 CSSCREW, HEX CAP 3/4″-10 X 3 CS B18.2.1 ZN GR5 (NS) FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1236087000000000001236087

NUT, HEX 3/4″-10 UNC, PLATED STLNUT, HEX 3/4″-10 UNC PLATED STL NYLON INSR (NS) FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 0221052000000000000221052

CRANKSHAFT BEARING ASSEMBLY SHIM SETSHIM SET, CRANKSHAFT BEARING ASSEMBLY FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1230726000000000001230726

DRILLED HEX CAP SCREW, 5/8″-11 X 1-1/2″SCREW, DRILLED HEX CAP 5/8″-11 X 1-1/2″ ALLOY B18.2.1 GR8 (NS) FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1386650000000000001386650

ROLLER BRG,9.843″ ODX5.512″ID 3.646 WDBEARING ROLLER 9.843″ OD X 5.512″ ID X 3.464″ WD SPHERICAL BRONZE FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1236034000000000001236034

CRANKSHAFT BRG CARRIER,RH, F/HOIST MPCRANKSHAFT BEARING CARRIER, RH, F/ HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1230683000000000001230683

BRG, 7.874″ OD X 4.331″ ID X 2.75″ WBEARING, 7.874″ OD X 4.331″ ID X 2.75″ WD FOR HOIST MUD PUMP, MODEL: E- 447, MAKE: WEATHERFORD, P/N: 1236018000000000001236018

HEX CAP DRILLED SCREW, 3/8″-16 X 1″, CSHEX CAP DRILLED SCREW, 3/8″-16 X 1″, CS, F/ HOIST MUD PUMP, MDL: E-447, WEATHERFORD , P/N: 1249114000000000001249114

PLATE NUT, CROSSHEAD GUIDE,F/ HOIST PUMPPLATE NUT, CROSSHEAD GUIDE, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1230695000000000001230695

FRONT MOUNT FLUID END ASSY, F/ MUD PUMPFRONT MOUNT FLUID END ASSEMBLY, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1234427000000000001234427

DISCHARGE VLVGUIDE BHG, F/ HOIST PUMPDISCHARGE VALVE GUIDE BUSHING, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1230774000000000001230774

FLUID END REAR DISCHARGE ASSY MUD PUMPFLUID END REAR DISCHARGE ASSEMBLY, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1885310000000000001885310

DISCHARGE VALVE COVER FLANGE, F/HOIST MPDISCHARGE VALVE COVER FLANGE, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1249942000000000001249942

O-RING, 65 OD X 3.1 CS HNBR,TRIPLEX PUMPO-RING, 65 OD X 3.1 CS HNBR, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1139167000000000001139167

DISC, VALVE, WFT T10 420, TRIPLEX PUMPDISC, VALVE, WFT T10 420, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, OLD P/N: 1372129, P/N: 1200282000000000001372129

SEAT, DISCHARGE VALVE, WFT T10 420SEAT, DISCHARGE VALVE, WFT T10 420, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1372130, P/N: 1200271000000000001372130

O-RING, 60 ODX3.1 CS, HNBR, TRIPLEX PUMPO-RING, 60 OD X 3.1 CS, HNBR, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1141659000000000001141659

SPRING, INTERMEDIATE VALVE, WFT T10 304SPRING, INTERMEDIATE VALVE, WFT T10 304, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1372132000000000001372132

CAGE, SUC VALVE, WFT T10 420,TRIPLEX PMPCAGE, SUCTION VALVE, WFT T10 420, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1372133000000000001372133

PLUNGER,32MM,WFT T10 Ni60+WC,TRIPLEX PMPPLUNGER, 32MM, WFT T10 Ni60+WC, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 265194000000000000265194

SLEEVE, GUIDE,32MM WFT T10AB,TRIPLEX PMPSLEEVE, GUIDE, 32MM WFT T10 AB, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 265280000000000000265280

RING, PACKING, 32MMWFT T10 TEFLON/KEVLARRING, PACKING, 32MMWFT T10 TEFLON/KEVLAR, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 265273000000000000265273

O-RING, 70 OD X3.1CS, HNBR, TRIPLEX PUMPO-RING, 70 OD X 3.1CS, HNBR, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 773845000000000000773845

SEAT, SUC VALVE, WFT T10 420,TRIPLEX PMPSEAT, SUCTION VALVE, WFT T10 420, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 291217000000000000291217

CAGE,DISCHARGE VLV,WFTT10420,TRIPLEX PMPCAGE, DISCHARGE VALVE, WFT T10 420, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1372126000000000001372126

O-RING, 45 OD X 3.1CS HNBR, TRIPLEX PUMPO-RING, 45 OD X 3.1CS HNBR, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1120428000000000001120428

SPRING, SEC VALVE,WFTT10 304,TRIPLEX PMPSPRING, SECTION VALVE, WFT T10 304, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 291218000000000000291218

SPRING, DISCHARGE VALVE, WFT T10 304,PMPSPRING, DISCHARGE VALVE, WFT T10 304, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1237269000000000001237269

The time depends on the MOQ of the order. The delivery time for parts is generally 1-3 days, and equipment is 7-30 days. In addition, contact us to get the full time of the order.

Jinan Tianwei Innovation Oilfield Equipment Enterprise -OEE, focusing on oil&gas drilling equipments and parts supply, is consist of a direct manufacturing plants, professional international trade branch, offshore account office, and experienced sales and workers. With the target of being the world first-class supplier, OEE is committed to good quality, competitive price, specialized service, timely delivery, and support our partners actively, and focusing on each long-term cooperation by creating Three-Win for MFG, RESELLERS, and DRILLING CONTRACTORS.

OEE is specialized in those equipments and spares for drilling rigs and mud system. All exported products will be approved by API or/and ISO. A reliable quality is guaranteed first.

Shale Shaker, Shaler Shaker screens(Derrick, Swaco, Brandt), Degasser, Mud Cleaner, Desander, Desilter, Decanter Centrifuge, Jet Mud Mixer, Mud Hopper, Mud Agitator, Mud Gun, Mud Tanks, Rig Mats,etc.

Mud Gate Valves, Mud butterfly valves, Mud tank Unions, Hammer Unions, Air Grip Unions, Drill Pipe Wiper, Mud Pressure Gauges, Gates V-belts, Air Flex Clutch, etc.

The time depends on the MOQ of the order. The delivery time for parts is generally 1-3 days, and equipment is 7-30 days. In addition, contact us to get the full time of the order.

At BOPM, we constantly maintain 5 million worth of mud pump parts on the shelf at our Houston warehouse location. It includes modules, liners, extension rods, piston rods, pistons , threaded rings, caps, valve covers, valve guides, valves, seats etc. for all major brands of pumps: Gardner Denver®, Ideco®, Emsco®, National®, Oilwell®, Skytop Brewster®, Lanshi(3NB1300C) ®, Bomco ®, HH ®.

BOPM offers a complete line of interchangeable fluid end modules and accessories for triplex mud pumps, such as National, Emsco, Gardner Denver, Bomco, Ideco and Oilwell. We offer both standard OEM style replacement parts and Two piece “L” Shaped fluid ends.

BOPM piston rods are made with premium grade, heat treated alloy steel. The rods offer excellent resistance to fatigue, corrosion and heavy loads. A full line of piston rods are available for various pumps.

BOPM extension rods are made from high strength alloy steel, and are either heat treated or chrome plated. The rod offers excellent resistance to fatigue, corrosion and heavy loads. BOPM extension rods are machined and polished to ensure a perfect seal to protect the mud pump gear end.

All of our gear set adopt high-end carburization heat treatment and precise grinding machining to offer unparalleled durability; first we use high strength alloy steel, then adopt the Carburization heat treatment to enhance the hardness and wearability, finally adopt the grinding fine machining to ensure the smooth gear teeth surface; Resulting in consistent and rugged performance throughout pump operation.

BOPM bonded urethane pistonsare constructed of urethane, bonded to a steel hub. The double durometer urethane is designed to provide optimal performance in oil or water based mud and high drilling pressures.

BOPM Replaceable Rubber Pistonis made with tough and durable Buna N rubber for all pressures, and is ideally suited for water-base mud. A special processing of the fabric provides an unusually waterproof bond of fabric to piston which assures longer life.

BOPM Bonded Rubber Pistonis made with tough and durable Buna N rubber for all pressures, and is ideally suited for water-base mud. A special processing of the fabric provides an unusually waterproof bond of fabric to piston which assures longer life.

We specialize in complete Weatherford restoration of internal wear parts Offering thermal spray coatings and specialty welding processes OD & IS Grinding & Machining To OEM Size.

Periodically we"ll inspect for wear, cracks and damage to critical components such as bearings, bull gear and pinion, conrods and crossheads. We"ll check the condition of your seals and other rubber goods and look for oil contamination. We"ll inspect your frame and ensure your pump is set up as per the manufacturer"s recommended tolerances, providing feedback and detailed reporting.

We keep your Weatherford mud pumps running in first class condition - providing onsite inspections, repairs and complete overhaul as well as all associated

Weatherford parts including the fluid end, power end, stuffing boxes, plungers, seals, bearings, diesel engines, and natural gas engines. We also have blasting and painting facilities as well as a machine shop. We have many years of experience rebuilding mud pumps

Where Weatherford overhaul is required we"ll take care of complete disassembly, cleaning and NDT. Repairs will be made to machined components as necessary. Bearings, seals and other components will be replaced in line with our inspections. Motors will be overhauled, lube systems serviced and pulsation dampeners recertified. We"ll also check your fluid ends are in spec and can repair or replace. Your pump is then fully reassembled and commissioned.

Description PZ-7 mud pump PZ-8 mud pump PZ-9 mud pump PZ-10 and PZ-11 mud pump Liner of Crosshead Upper 200PZG309 2012509 PZ222 200PZL309 Liner of Crosshead Lower 200PZG309 2012509 PZ222 200PZL309 Pin of ... Read More

Weatherford offers a full line of premium-quality mud pumps based on proven and simple-to-maintain designs that are accepted around the world. Each pump comes with exceptional service and support that only a ... Read More

Weatherford is one of the world"s largest multinational oil and natural gas service companies. The company provides products and services for drilling, evaluation, completion, production and intervention of oil ... Read More

Website: www.premiumrigparts.com Weatherford is one of the world"s largest multinational oil and natural gas service companies. The company provides products and services for drilling, evaluation, completion, ... Read More

Weatherford is one of the world"s largest multinational oil and natural gas service companies. The company provides products and services for drilling, evaluation, completion, production and intervention of oil ... Read More

Spare parts for SPM TWS-2250 pumps with plunger 4.5" Item No. Name Code Part Number SPM 1 Fluid end IMZ-07.331.00 1P100646 2 Spacer IMZ-07.331.21 4P100649 3 Header ring IMZ-07.330.07 P100195HP 4 Pressure ring ... Read More

Weatherford is one of the world"s largest multinational oil and natural gas service companies. The company provides products and services for drilling, evaluation, completion, production and intervention of oil ... Read More

Weatherford offers a full line of premium-quality mud pumps based on proven and simple-to-maintain designs that are accepted around the world. Each pump comes with exceptional service and support that only a ... Read More

Website: www.premiumrigparts.com Weatherford is one of the world"s largest multinational oil and natural gas service companies. The company provides products and services for drilling, evaluation, completion, ... Read More

Standard Industrial Manufacturing started in 1979. Our mission was to manufacture and supply pump parts to a few select pump retailers and OEMs. During the 1980s the company expanded its customer base to include all pump retailers and OEMs. Today, Standard has broadened its product lines to include most fluid-end expendables for all major pump brands.

Weatherford provides cost-effective pumping solutions for optimum performance and operating efficiency to address and enhance specific industrial applications and product requirements in a number of industrial applications.

Specializing in innovative formation evaluation techniques, products and services that ensure well integrity and drilling reliability, novel reservoir completion and stimulation technology that optimizes recovery, and the industry’s leading portfolio of artificial lift products and production optimization capabilities, Weatherford develops and applies its specific technology, understanding and expertise to help its customers efficiently develop new resources and maximize recovery from producing reservoirs.

Weatherford focuses specifically on reducing customers’ costs and risks with competent personnel, reliable products and consistent, safe performance at the well site all of which underpin our credibility as an oil field service company.