weatherford mud pump parts factory

The Weatherford MP Series F & FB style design compatibility means that parts are readily available and fully interchangeable. The MP series mud pumps are based on the industry-recognized, proven and trusted F & FB style mud pump. The MP10 & MP16 Models are always in stock and available for immediate shipment.

The MP Series F style design compatibility means that parts are readily available and fully interchangeable. The MP series mud pumps are based on the industry-recognized, proven and trusted F style mud pump. Any of these parts for the MP Series models below can be purchased from Rig Manufacturing, LLC.

Mud-Pump Gear Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Weatherford products and services are subject to the Company’s standard terms and conditions, available on request or at weatherford.com. For more information contact an authorized Weatherford representative. Unless noted

otherwise, trademarks and service marks herein are the property of Weatherford. Specifications are subject to change without notice. Weatherford sells its products and services in accordance with the terms and conditions set

Weatherford creates innovative pumps for the oil and gas industry. Focused on ethical and sustainable business practices, Weatherford provides W and T Series power pumps, along with products related to drilling and rigs.

From their W-60 Triplex Pump to their W-375 Quintuplex Pump, this brand offers high performance products which will suit any of your power pump needs. Weatherford’s power pumps are made of materials like bronze and steel, and they are created with harsh conditions and continuous use in mind.

Knighten Industries offers products from some of the most recognizable brands on the market, and this includes Weatherford. Whatever the application, we can help you find the right choice from a versatile range of pumps.

LINER, 4-1/2″, CHROME IRON, FOR HOIST MPLINER, 4-1/2″, CHROME IRON, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1244388000000000001244388

LINER, 5-1/2″, CHROME IRON, FOR HOIST MPLINER, 5-1/2″, CHROME IRON, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1244390000000000001244390

PISTON BHG, 1.625 X 1.50, PLASTIC, PUMPPISTON BUSHING, 1.625 X 1.50, PLASTIC, F/HOIST MUD PUMP, MDL: E-447, MAKE: WEATHERFORD, P/N: 1411483000000000001411483

BONDED PISTON, 4-1/2″, NBR, FOR HOIST MPBONDED PISTON, 4-1/2″, NBR, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317551000000000001317551

PISTON,4″K-SERIES REPLACABLE RUBBER COMPPISTON, 4″ K-SERIES REPLACABLE RUBBER COMPLETE FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317544000000000001317544

PISTON, 4-1/2″, WEATHERFORDPISTON, 4-1/2″ B-SERIES REPLACABLE RUBBER COMPLETE FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317552000000000001317552

PISTON,5″B-SERIES REPLACABLE RUBBER COMPPISTON, 5″ B-SERIES REPLACABLE RUBBER COMPLETE FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317560000000000001317560

PISTON, 5-/2″ B-SERIES REPLACABLE RUBBERPISTON, 5-/2″ B-SERIES REPLACABLE RUBBER COMPLETE FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317568000000000001317568

PISTON, 6″ B-SERIES REPLACABLE RUBBERPISTON, 6″ B-SERIES REPLACABLE RUBBER COMPLETE FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317576000000000001317576

PISTON RUBBER,4″K-SERIES REPLACEMENT KITPISTON RUBBER, 4″ K-SERIES REPLACEMENT KIT FOR HOIST MUD PUMP, MODEL: E- 447, MAKE: WEATHERFORD, P/N: 1317520000000000001317520

PISTON RUBBER, 4-1/2″, WEATHERFORDPISTON RUBBER, 4-1/2″ B-SERIES REPLACEMENT KIT FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317522000000000001317522

PISTON RUBBER,5″B-SERIES REPLACEMENT KITPISTON RUBBER, 5″ B-SERIES REPLACEMENT KIT FOR HOIST MUD PUMP, MODEL: E- 447, MAKE: WEATHERFORD, P/N: 1317524000000000001317524

PISTON RUBBER, 5-1/2″, WEATHERFORDPISTON RUBBER, 5-1/2″ B-SERIES REPLACEMENT KIT FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1317526000000000001317526

PISTON RUBBER,6″K-SERIES REPLACEMENT KITPISTON RUBBER, 6″ K-SERIES REPLACEMENT KIT FOR HOIST MUD PUMP, MODEL: E- 447, MAKE: WEATHERFORD, P/N: 1317528000000000001317528

HYD PULLER KIT LESS PULLER HEAD,MDL:E447HYDRAULIC PULLER KIT ( LESS PULLER HEAD) ASSY, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1241141000000000001241141

VLVGUIDE BHG, CARBON STEEL, WEATHERF/DVALVE GUIDE BUSHING, CARBON STEEL, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1259512000000000001259512

LINER RETAINER STUD, LONG, W/ 2 HHNSLINER RETAINER STUD, LONG, W/ 2 HHNS, F/ HOIST MUD PUMP, MDL: E-447, MAKE: WEATHERFORD, P/N: 1230764000000000001230764

CROSS HEAD INSPECTION GASKET, F/HOIST MPCROSS HEAD INSPECTION GASKET, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1230743000000000001230743

REAR COVER GASKET ( PER INCH),F/HOIST MPREAR COVER GASKET ( PER INCH), FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1248661000000000001248661

STABILIER BOLT AND WASHER, F/ HOIST PUMPSTABILIER BOLT AND WASHER, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1775203000000000001775203

PRES RELIEF VLV, 5K 3″ 1502 CONNECTIONPRES RELIEF VALVE, 5K 3″ 1502 CONNECTION FM-IN X M-OUT, MDL: E-447, MAKE: WEATHERFORD, P/N: 1268435000000000001268435

HEX CAP SCREW, 1/2″-13 X 1-1/2″, CSHEX CAP SCREW, 1/2″-13 X 1-1/2″ CS, FOR HOIST MUD PUMP, MDL: E-447, MAKE: WEATHERFORD, P/N: 1236068000000000001236068

HEX CAP SCREW, 5/8″-11 X 2-1/2″, CSHEX CAP SCREW, 5/8″-11 X 2-1/2″ CS, FOR HOIST MUD PUMP, MDL: E-447, MAKE: WEATHERFORD, P/N: 1236076000000000001236076

HEX CAP SCREW, 1/2″-13 X 1-1/4″, CSHEX CAP SCREW, 1/2″-13 X 1-1/4″ CS, FOR HOIST MUD PUMP, MDL: E-447, MAKE: WEATHERFORD, P/N: 1236067000000000001236067

HEX CAP SCREW, 3/4″-10 X 3 CSSCREW, HEX CAP 3/4″-10 X 3 CS B18.2.1 ZN GR5 (NS) FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1236087000000000001236087

NUT, HEX 3/4″-10 UNC, PLATED STLNUT, HEX 3/4″-10 UNC PLATED STL NYLON INSR (NS) FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 0221052000000000000221052

CRANKSHAFT BEARING ASSEMBLY SHIM SETSHIM SET, CRANKSHAFT BEARING ASSEMBLY FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1230726000000000001230726

DRILLED HEX CAP SCREW, 5/8″-11 X 1-1/2″SCREW, DRILLED HEX CAP 5/8″-11 X 1-1/2″ ALLOY B18.2.1 GR8 (NS) FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1386650000000000001386650

ROLLER BRG,9.843″ ODX5.512″ID 3.646 WDBEARING ROLLER 9.843″ OD X 5.512″ ID X 3.464″ WD SPHERICAL BRONZE FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1236034000000000001236034

CRANKSHAFT BRG CARRIER,RH, F/HOIST MPCRANKSHAFT BEARING CARRIER, RH, F/ HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1230683000000000001230683

BRG, 7.874″ OD X 4.331″ ID X 2.75″ WBEARING, 7.874″ OD X 4.331″ ID X 2.75″ WD FOR HOIST MUD PUMP, MODEL: E- 447, MAKE: WEATHERFORD, P/N: 1236018000000000001236018

HEX CAP DRILLED SCREW, 3/8″-16 X 1″, CSHEX CAP DRILLED SCREW, 3/8″-16 X 1″, CS, F/ HOIST MUD PUMP, MDL: E-447, WEATHERFORD , P/N: 1249114000000000001249114

PLATE NUT, CROSSHEAD GUIDE,F/ HOIST PUMPPLATE NUT, CROSSHEAD GUIDE, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1230695000000000001230695

FRONT MOUNT FLUID END ASSY, F/ MUD PUMPFRONT MOUNT FLUID END ASSEMBLY, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1234427000000000001234427

DISCHARGE VLVGUIDE BHG, F/ HOIST PUMPDISCHARGE VALVE GUIDE BUSHING, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1230774000000000001230774

FLUID END REAR DISCHARGE ASSY MUD PUMPFLUID END REAR DISCHARGE ASSEMBLY, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1885310000000000001885310

DISCHARGE VALVE COVER FLANGE, F/HOIST MPDISCHARGE VALVE COVER FLANGE, FOR HOIST MUD PUMP, MODEL: E-447, MAKE: WEATHERFORD, P/N: 1249942000000000001249942

O-RING, 65 OD X 3.1 CS HNBR,TRIPLEX PUMPO-RING, 65 OD X 3.1 CS HNBR, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1139167000000000001139167

DISC, VALVE, WFT T10 420, TRIPLEX PUMPDISC, VALVE, WFT T10 420, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, OLD P/N: 1372129, P/N: 1200282000000000001372129

SEAT, DISCHARGE VALVE, WFT T10 420SEAT, DISCHARGE VALVE, WFT T10 420, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1372130, P/N: 1200271000000000001372130

O-RING, 60 ODX3.1 CS, HNBR, TRIPLEX PUMPO-RING, 60 OD X 3.1 CS, HNBR, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1141659000000000001141659

SPRING, INTERMEDIATE VALVE, WFT T10 304SPRING, INTERMEDIATE VALVE, WFT T10 304, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1372132000000000001372132

CAGE, SUC VALVE, WFT T10 420,TRIPLEX PMPCAGE, SUCTION VALVE, WFT T10 420, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1372133000000000001372133

PLUNGER,32MM,WFT T10 Ni60+WC,TRIPLEX PMPPLUNGER, 32MM, WFT T10 Ni60+WC, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 265194000000000000265194

SLEEVE, GUIDE,32MM WFT T10AB,TRIPLEX PMPSLEEVE, GUIDE, 32MM WFT T10 AB, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 265280000000000000265280

RING, PACKING, 32MMWFT T10 TEFLON/KEVLARRING, PACKING, 32MMWFT T10 TEFLON/KEVLAR, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 265273000000000000265273

O-RING, 70 OD X3.1CS, HNBR, TRIPLEX PUMPO-RING, 70 OD X 3.1CS, HNBR, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 773845000000000000773845

SEAT, SUC VALVE, WFT T10 420,TRIPLEX PMPSEAT, SUCTION VALVE, WFT T10 420, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 291217000000000000291217

CAGE,DISCHARGE VLV,WFTT10420,TRIPLEX PMPCAGE, DISCHARGE VALVE, WFT T10 420, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1372126000000000001372126

O-RING, 45 OD X 3.1CS HNBR, TRIPLEX PUMPO-RING, 45 OD X 3.1CS HNBR, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1120428000000000001120428

SPRING, SEC VALVE,WFTT10 304,TRIPLEX PMPSPRING, SECTION VALVE, WFT T10 304, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 291218000000000000291218

SPRING, DISCHARGE VALVE, WFT T10 304,PMPSPRING, DISCHARGE VALVE, WFT T10 304, FOR TRIPLEX PUMP T10-30MM, MODEL: 1753066, MAKE: WEATHERFORD, P/N: 1237269000000000001237269

The time depends on the MOQ of the order. The delivery time for parts is generally 1-3 days, and equipment is 7-30 days. In addition, contact us to get the full time of the order.

Jinan Tianwei Innovation Oilfield Equipment Enterprise -OEE, focusing on oil&gas drilling equipments and parts supply, is consist of a direct manufacturing plants, professional international trade branch, offshore account office, and experienced sales and workers. With the target of being the world first-class supplier, OEE is committed to good quality, competitive price, specialized service, timely delivery, and support our partners actively, and focusing on each long-term cooperation by creating Three-Win for MFG, RESELLERS, and DRILLING CONTRACTORS.

OEE is specialized in those equipments and spares for drilling rigs and mud system. All exported products will be approved by API or/and ISO. A reliable quality is guaranteed first.

Shale Shaker, Shaler Shaker screens(Derrick, Swaco, Brandt), Degasser, Mud Cleaner, Desander, Desilter, Decanter Centrifuge, Jet Mud Mixer, Mud Hopper, Mud Agitator, Mud Gun, Mud Tanks, Rig Mats,etc.

Mud Gate Valves, Mud butterfly valves, Mud tank Unions, Hammer Unions, Air Grip Unions, Drill Pipe Wiper, Mud Pressure Gauges, Gates V-belts, Air Flex Clutch, etc.

A crosshead is a mechanism used in large reciprocating engines to eliminate sideways pressure on the piston. The crosshead of mud pump produced by our company is made of high quality wear resistant with special techniques. It features little deformation, higher precision and very little tolerance.

The crosshead is the critical part on the power end of the mud pump. It slides in the upper and lower guide plates, motivating the intermediate draw bar to deliver driving force to the hydraulic end. One of its ends fixes the intermediate draw bar. The cavity connects the small end of the connecting rod through cross head pin.

Crosshead has high accuracy and precious dimension and no deformation. Besides F-500 mud pump that is cylindrical structure, upper and lower guide structures are used for other mud pumps, so that the concentricity can be adjusted by adding space under the lower guide. Flange-bolts with pinhole fit are used for connecting crosshead to extension rod.

We specialize in complete Weatherford restoration of internal wear parts Offering thermal spray coatings and specialty welding processes OD & IS Grinding & Machining To OEM Size.

Periodically we"ll inspect for wear, cracks and damage to critical components such as bearings, bull gear and pinion, conrods and crossheads. We"ll check the condition of your seals and other rubber goods and look for oil contamination. We"ll inspect your frame and ensure your pump is set up as per the manufacturer"s recommended tolerances, providing feedback and detailed reporting.

We keep your Weatherford mud pumps running in first class condition - providing onsite inspections, repairs and complete overhaul as well as all associated

Weatherford parts including the fluid end, power end, stuffing boxes, plungers, seals, bearings, diesel engines, and natural gas engines. We also have blasting and painting facilities as well as a machine shop. We have many years of experience rebuilding mud pumps

Where Weatherford overhaul is required we"ll take care of complete disassembly, cleaning and NDT. Repairs will be made to machined components as necessary. Bearings, seals and other components will be replaced in line with our inspections. Motors will be overhauled, lube systems serviced and pulsation dampeners recertified. We"ll also check your fluid ends are in spec and can repair or replace. Your pump is then fully reassembled and commissioned.

At BOPM, we constantly maintain 5 million worth of mud pump parts on the shelf at our Houston warehouse location. It includes modules, liners, extension rods, piston rods, pistons , threaded rings, caps, valve covers, valve guides, valves, seats etc. for all major brands of pumps: Gardner Denver®, Ideco®, Emsco®, National®, Oilwell®, Skytop Brewster®, Lanshi(3NB1300C) ®, Bomco ®, HH ®.

BOPM offers a complete line of interchangeable fluid end modules and accessories for triplex mud pumps, such as National, Emsco, Gardner Denver, Bomco, Ideco and Oilwell. We offer both standard OEM style replacement parts and Two piece “L” Shaped fluid ends.

BOPM piston rods are made with premium grade, heat treated alloy steel. The rods offer excellent resistance to fatigue, corrosion and heavy loads. A full line of piston rods are available for various pumps.

BOPM extension rods are made from high strength alloy steel, and are either heat treated or chrome plated. The rod offers excellent resistance to fatigue, corrosion and heavy loads. BOPM extension rods are machined and polished to ensure a perfect seal to protect the mud pump gear end.

All of our gear set adopt high-end carburization heat treatment and precise grinding machining to offer unparalleled durability; first we use high strength alloy steel, then adopt the Carburization heat treatment to enhance the hardness and wearability, finally adopt the grinding fine machining to ensure the smooth gear teeth surface; Resulting in consistent and rugged performance throughout pump operation.

BOPM bonded urethane pistonsare constructed of urethane, bonded to a steel hub. The double durometer urethane is designed to provide optimal performance in oil or water based mud and high drilling pressures.

BOPM Replaceable Rubber Pistonis made with tough and durable Buna N rubber for all pressures, and is ideally suited for water-base mud. A special processing of the fabric provides an unusually waterproof bond of fabric to piston which assures longer life.

BOPM Bonded Rubber Pistonis made with tough and durable Buna N rubber for all pressures, and is ideally suited for water-base mud. A special processing of the fabric provides an unusually waterproof bond of fabric to piston which assures longer life.

The TD-60 power end and the FE-85, FE-145 fluid ends were some of the original Waterblasting pumps. No need to replace those when you have genuine GD Energy Products replacement parts to keep them running. From packing to plungers, stuffing boxes to connecting rods, GD Energy Products has your replacement pieces for your Weatherford waterblasting pumps.

GD Energy Products customer representatives are experienced with the Weatherford waterblasting pumps. We have the torque specifications, flow rates, and manuals to get you through the repair process. GD Energy Products will get you the right part for your equipment to keep you running your classic Weatherford pump.

The FE-85 and the FE-145 are true workhorses and if you have one you would want to give it the parts it deserves. GD Energy Products ISO quality puts stringent requirements on the parts that it ships to customers. You can feel better knowing you are getting a quality part from a company that has been distributing these parts for over 30 years. Call us and get your Weatherford pump back up and running.

Mud PumpGeneral features:Mud pump is rigid and compacted with excellent performance, which is applicable to high pump pressure and large discharge for well drilling in oilfield. These pumps have long stroke range and low numbers of stroke so that it can improve inlet performance of pump and extend life of easy-broken parts, besides, structure of air bag is advanced and reliable.

Within those famous China oil and gas mud pump manufacturers, GAOTON is a professional such supplier, producer and provider, welcome to wholesale petroleum and oilfield API mud pump from our factory.