what is a mud pump liner factory

Lake Petro provides high quality Mud Pump Parts including Mud Pump Liners, Mud Pump Fluid End Module, piston, Valve and Seat etc. With more than 10 years of experience in the oil and gas industry, we are dedicated to help and support our loyal clients with the most cost-effective and quality Liners and Pistons. We also provide mud pump price and mud pump for sale.

We offer Liners with Ceramic (Zirconia and Aluminium oxide) and Steel (Metal and Bi-metal) materials for all common brands of the mud pump and triplex mud pump.

Bi-metal liners (double metal liners) are made of forged steel shell and wear-resistant sleeve of high chromium iron. In the production process, the size accuracy should be strictly controlled, which can ensure that they can be easily and stably installed. The inner sleeve with high finish and hardness is wear-resistant, corrosion-resistant and has a long service life. The bi-metal liners are suitable for a lot of bad working conditions. Its service life is more than 800 hours.

Ceramic Liners are made of a ceramic inner sleeve and a forged steel outer shell. The service life of ceramic liners is about 4000 to 10000 hours, the minimum time is at least 2000 hours, which is a lot more than bi-metal liners. Because of the phase transformation toughen technology, the ceramic liners have the features of wear-resistance, erosion-resistance, high-pressure-resistance, high hardness and strength. Zirconia type and Alumina type are common type of ceramic sleeve. Compared with Alumina type, Zirconia type liners have better toughness properties and a much longer service life. Piston wear and water consumption for lubrication can be reduced as well.

Seal Rings for Liner packing are also important. Liner Seal Rings is designed and made with hard corner which is an integral part of seal rings and soft nitrile element rubber center. We could provide reliable liner Seal Rings for our customers could order them at the same time.

All Lake Petro liner products are interchangeable with O.E.M. products. Meanwhile, we provide customized Liners according to drawings. Our liners, also with our other mud pump spares, are supplied for use in Honghua, F-Series, Bomco, Emsco and National lines of triplex drilling pumps. Let Lake Petro be your one-stop shop for your whole fleet of pumps. Please refer to “Suitable Pump Models” Lable for more details.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Centerline Manufacturing is committed to the highest level of customer service quality.  Every Centerline pump is comprehensively and repeatedly tested at diverse pressure levels to assure that it goes to our customer in perfect operational order. Centerline technicians work to ensure that our customers fully understand the operation of the model being delivered.  If a customer"s pump is down, we understand the importance of timely response and parts availability.  Centerline technicians will assess the problem and make repairs to bring the pump back into new specification. The Centerline mud pump technicians are well versed and qualified to operate and repair any product that is provided to the customer.

Jinan Longchao Petrolleum Machinery Co. is a company in Jinan, Shandong, China, with main supply of mud pump liners and package solution of mud pump fluid end. With more than 30 years dedication of liner manufacturing, we have successfully delivered more than one million pieces of different kinds of premium quality pump liners. LONGCHAO are number one mud pump liner production factory in China for more than 20years.

interchangeable with OEM pumps. Incl. Gardner Denver, National, Oilwell, IDECO, EMSCO, BOMCO, Russian Pump. with support of our business partners and clients, our products are widely accepted by tier one drilling contractors from both China and overseas. Now our mud pump liners were delivered to every oilfield in the world, including America, Canada, Russia, India, West Europe, East Europe, Saudi, Oman, Irag, Indonesia etc.

With our slogan, focusing mud pump liner, without change for 30 years, we are growing to be the world number one production factory. We are looking forward to cooperate with you, our team will provide the best service and the best quality products!

A wide variety of ceramic liner for mud pump options are available to you, such as 1 year, not available and 3 years.You can also choose from new, ceramic liner for mud pump,As well as from energy & mining, construction works , and machinery repair shops. and whether ceramic liner for mud pump is 1.5 years, 6 months, or unavailable.

Production Process: The bi-metal cylinder Liner of our company combined with the advantages of abrasion hot-forging out liner and anticorrosion high chrome inner liner. The out liner is made of high quality carbon steel by hot pressing forming. Its tensile strength is over 900000psi. The inner liner is made of high-chromium alloy by centrifugal casting.

Bi-metal Liners combine the strength of a forged steel outer shell with the abrasion and corrosion resistance of a high chrome inner sleeve. These liners feature a centrifugally cast high chrome iron sleeve which is machined and heat treated to a minimum uniform bore hardness of 59-65HRC. Bi-metal Liners is the main expendable parts of the mud pump, it adapts double metal fix together.

The outer sleeve is forged steel with quality carbon steel,the inner sleeve is casted with high carbon and high chromimum use the technology of centrigual casting, after treatment ,the hardness of it can reach to a level of 59-67HRC.

Ceramic Liners combine the strength of a forged steel outer shell with the abrasion and corrosion resistance of a ceramic inner sleeve. Ceramic cylinder inner sleeve is used zirconia toughening alumina ceramics obtained the national patent, using zirconium oxide the characteristics of high fracture toughness and high hardness of alumina, the combination of these two can improve the fatigue strength of the product. Its coat uses 45 steel forging with good mechanical properties. After tempering heat treatment, hardness of HB235-265, the tensile strength is not less than 655 mpa.

A: First we discuss order details, production details. Then we issue you an PI for your confirmation. You will be requested to do pr-e paid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 15-25 days if we don"t have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.

Our liners can meet the API manufacture standards, combining the strength of forged steel hull and corrosion resistance of a high chromium iron inner sleeve.These liners feature a centrifugally cast high chrome iron sleeve which is machined and heat treated strictly to a hardness of HRC≥61-64.

B.premium liners meet the API manufacture standards, combining the strength of a forged steel outer and corrosion resistance of a high chromium iron inner sleeve. These liners feature a centrifugally cast high chrome iron sleeve which is machined and heat treated-strictly to a hardness of HRC>=61~64.According to the using of many oil-fields at home and aboard, the using theme of our liners are 800hours in high pressure, sediment concentration and other harsh environment, this time is 2-3times than ordinary liners.

Baohao has the professional technical engineer which specializes in producing and designing experience of many years of this line. And this is good for improving the drilling speed ,reducing the drilling cost and decreasing the intensity of labor.

Shaanxi FORUS Petroleum Machinery Equipment Co., Ltd is a professional exporter of oil drilling machinery and equipment ,we mainly engaged in worldwide brands drilling mud pumps and accessories etc. ...

QC Profile Every company deeply understand that quality is the basic weapon for an enterprise to win. Quality is one of the factor that helped the business to achieve success, so we strive to provide ...

The mud pump cylinder liner is an important wearable part of the hydraulic end of the mud pump, so the life of the mud pump cylinder liner directly affects the life of the mud pump. Because the working surface of the cylinder liner is in contact with high-temperature and high-pressure gas, there is a piston ring that reciprocates at high speed on its surface, which determines that the cylinder liner must not only have sufficient strength and rigidity, but also must be resistant to high temperature, corrosion and abrasion.

There are four types of common mud pump cylinder liners: single-metal cylinder liners, bi-metal cylinder liners, ceramic cylinder liners, and nickel-based alloy cylinder liners.

Tightly joined by the inner and outer layers. The outer sleeve is forged to resist wear and uses centrifugal forging technology; the inner sleeve has high chromium wear and corrosion resistance, and the hardness reaches 62 Rockwell C after heat treatment.

The production of our company"s bimetallic cylinder liner strictly controls the size within the tolerance range to ensure easy installation, high inner liner finish, wear resistance, corrosion resistance, long service life, and it is suitable for various harsh working environments.

2. The pure zirconia ceramic cylinder liner developed by phase change toughening technology has the advantages of wear resistance, corrosion resistance, high pressure resistance, high temperature resistance, high strength and high hardness.

4. Compared with alumina ceramics, composite ceramic cylinder liners, toughened composite ceramic cylinder liners, it is more tough, wear-resistant and corrosion-resistant, has a longer life, saves lubricating water, and reduces the wear of pistons and other accessories.

Titan Oil Tools offers high quality mud pump expendables and mud pump replacement parts for the wide variety of mud pumps, centrifugal pumps found on the world market today. These quality pump parts offer great performance and our pricing will save you money.

We are your oilfield supplier of choice for mud pump spares and mud pump parts: mud pump piston liners and pistons. All mud pump parts can be sourced for fast delivery; Come to us for mud pump liners, pistons, piston rods and parts, pony rods, threaded rings and caps,and more. Try us for duplex and triples pump spares and duplex and triplex mud pump parts, and also valve parts like valve seats. gland nut, and mud pump gaskets.

Mud pump liners may come in chrome, alumina ceramic and zirconia ceramic. Chrome liners and alumina ceramic liners are less costly, their cost of replacement over one year as the chart below shows, is much more than zirconia ceramic liners.

The table below shows a Mud Pump Liner Cost of Ownership which shows a reasonable cost comparison for a rig in continuous service for 36 months. This of course does not include the high cost of maintenance downtime and the cost of labor.

The prices below are based on cost/cylinder. Savings increase when you add up the number of pump cylinders on your rigs and extend the savings to understand the big difference it can make for your budget.