12 gauge overshot cards free sample

Place an overshot card on top of the shot charge just before crimping to improve overall crimp quality and seal in small shot and/or buffer. Excellent for use with BPI Roll Crimpers.

Our testing lab has proven that poor crimps can alter the performance of an otherwise good load. Overshot cards always produce better, more consistent crimps and this consistency is demonstrated in the standard deviation of loads in our lab. Our ballistic lab recommends overshot cards for better crimps in all loads.

Clear Overshot Disks(either plain or printed with shot size) are also offered for great roll crimping options. See pictures in Additional Images or click on this link.

Shotshell size selection: Use the same size gauge as your hull. Smaller diameter cards also work if your particular size is out of stock. For example, a 20ga overshot card works in a 16-gauge shotshell and so on.

While reloading shot shells and using roll crimps, overshot cards are placed on top of the shot/buffer media to keep everything in the shell. ...Why buy them when you can print them for about 2 cents each?

This is an overshot/wad card cutting die. Insert this die upside down inside your press using a L-N-L bushing adapter. I"ve made provisions for adding a metal washer or other insert to beef up the cutting area. Reem the metal insert to 18.67mm.

This one is an overshot waterwheel, printed as a flat pack then glued together. ...I have included 2 versions of the paddles a single piece on and a 3 piece on that can be printed flat

This one is an overshot waterwheel, printed as a flat pack then glued together. ...I have included 2 versions of the paddles a single piece on and a 3 piece on that can be printed flat

Overshot water wheels In an overshot water wheel the mill race brings the water to the top of the wheel, where it strikes the paddles or buckets and turns the wheel. This is more efficient because as well as the force of the flowing water, the...

12g (12 gauge) Template for cutting out Overshot Cards for Shotgun Rollcrimp Shot Shells If you like my models please consider supporting me on Patreon : https://www.patreon.com/bigmrtong

Friend wanted to know if I could make business cards for him. After some trial and error this what he got. ...Of corse scaled down to .3 so it will be about the size of your palm.

Wanted a case for business cards. ...Prints quickly on mk MK2s. Fusion 360. I suggest you slightly size the top up a hair so its a snugger fit. 85mmx55mm business card.

Place an overshot card on top of the shot charge just before crimping to improve overall crimp quality and seal in small shot and/or buffer. Excellent for use with BPI Roll Crimpers.

Our testing lab has proven that poor crimps can alter the performance of an otherwise good load. Overshot cards always produce better, more consistent crimps and this consistency is demonstrated in the standard deviation of loads in our lab. Our ballistic lab recommends overshot cards for better crimps in all loads.

Shotshell size selection:Use the same size gauge as your hull. Smaller diameter cards also work if your particular size is out of stock. For example, a 20ga overshot card works in a 16-gauge shotshell and so on.

My percussion gun is a CVA 12 gauge CB shotgun. I have used single cards, and 2 OS cards( shirt-back cardboard) just to see if they blow my patterns at all using the two of them, and found no difference in patterns. Neither have the wads moved in recoil.

My Fowler is suppose to be 20 gauge, but it actually measures closer to 19 gauge! :shocked2: It was given to me as a birthday present by my brother, along with 20 gauge wads and cards. We found out the problems the first time we shot the gun. We had to order new 19 gauge OP wads, and OS cards, before the guns shot satisfactory. With the 19 gauge card in place I can turn the muzzle down, and shake that gun up and down, and the load does Not MOVE!

You have to actually MEASURE your bore diameter to answer the question for EVERY GUN. This is one time when "doing it the way others do it" simply is not very good advice. Do NOT rely on what is stamped on the barrel in ordering your wads and cards. :hmm: :surrender: :thumbsup: :hatsoff: :hatsoff:

Place an overshot card on top of the shot charge just before crimping to improve overall crimp quality and seal in small shot and/or buffer. Excellent for use with BPI Roll Crimpers.

Our testing lab has proven that poor crimps can alter the performance of an otherwise good load. Overshot cards always produce better, more consistent crimps and this consistency is demonstrated in the standard deviation of loads in our lab. Our ballistic lab recommends overshot cards for better crimps in all loads.

Clear Overshot Disks (either plain or printed with shot size) are also offered for great roll crimping options. See pictures in Additional Images or click on this link.

Shotshell size selection: Use the same size gauge as your hull. Smaller diameter cards also work if your particular size is out of stock. For example, a 20ga overshot card works in a 16-gauge shotshell and so on.