8 shaft overshot free sample

I’ve owned my 8-shaft weaving loom for just over a year, but it’s only recently that I’ve started weaving projects that require “more than four, such as 8-shaft weaving loom projects.” Honestly, I could probably have woven nothing but 4-shaft projects for the rest of my weaving life and been perfectly happy. However, as I work for a weaving magazine, I figured it would probably be best to take the leap and dust off my neglected shafts 5 through 8.

After my first 8-shaft project, I fell in love. Robyn Spady recently explained to me that you can weave every structure except for loom-controlled satin on a 4-shaft loom. But you have much greater design possibilities on an 8-shaft loom. After weaving my first few projects, I am completely hooked on 8-shaft weaving. I can’t wait to get my current 8-shaft project on the loom so I can warp up the next.

In honor of the amazing, versatile 8-shaft loom, Interweave"s weaving experts compiled three beautiful 8-shaft weaving projects available to you for free in the eBook. Experiment away, and learn how to make the most of all 8 shafts on your loom.

It can be a big change when a weaver gets access to an 8-shaft loom. The possibilities are vast with all those shafts, and it can be difficult to decide what to try first. Spark your imagination and grow your skills with these beautiful scarf and shawl patterns, perfect for 8-shaft looms.

Beginners will find the projects easy to follow, detailed with instructions and images. Experienced weavers will love the beautiful 8-shaft weaving loom projects and advancing their skills while creating a project they will be able to show off.

Tencel and twill are perfect partners for showing off color, shine, and drape. You"re sure to sparkle in this unique and elegant twill scarf! Plus you"ll learn the basics of 8-shaft weaving so that you can experiment on your own in the future. Watching the advancing point twill unfold before your eyes never gets old, making this a perfect project for new and experienced weavers alike.

Cashmere is often used by knitters for lace sweaters or lightweight shawls. It has an insulating quality greater than sheep’s wool, and this project adds a little silk for extra shine. To showcase such a special yarn, Carry used a draft designed that features a narrow band of overshot as a supplementary warp on a ground cloth of bamboo, another soft yarn that compliments the cashmere/silk. Turning the overshot draft warp-wise makes the most efficient use of that precious yarn.

Warp once and weave two scarves that capture the constantly changing colors and movement of the Pacific Ocean. You"ll weave one scarf in a collapse-weave structure that creates pleats in the fabric, then make a warp-dominant second scarf. This basic technique for creating pleats doesn"t require much extra work, just a special hemstitching technique to encourage the natural pleats. Build on these skills to design your own 8-shaft weaving projects using collapse weave techniques.

It is truly luxurious to wrap up in a fluffy, handwoven bath towel when you step out of the shower or bath.  These towels make great gifts, sure to impress even the most discerning of newlyweds! The towels come with soft natural white for the body of the towel, and you choose your favorite accent color from 10 Maurice Brassard colors to customize these towels!  And, for the best part…they weave up quickly.   The kit makes 2 thick and thirsty bath towels (finished size approximately 31” x 64”). Woven with soft 8/2 unmercerized cotton yarn, and a 4 or 8-shaft waffle weave structure, these towels have a delicious softness.  Treat yourself or your loved ones to some new towels!

After weaving my Neige Scarf, I had some leftover warp on the loom, and knew I wanted to change gears a little bit and go bold with both pattern and color. This overshot pattern, technically an elaborate point twill, reminds me of one of my favorite needlepoint techniques, Bargello.

The draft comes from one of my most favorite weaving resources, one I believe is a must on any weaver’s bookshelf, A Weaver’s Book of 8-Shaft Patterns edited by Carol Strickler. As with the Neige Scarf, the structure of the Voltaic Scarf looks complicated, but the effort is in the threading. Unlike a straight draw, where the ends of a warp are threaded 1-2-3-4, etc, an overshot threading is unique to the pattern and directly related to the treadling of the warp ends. The large blocks of color created by floats of the patterning weft are stabilized by a tabby weft, a much thinner warp end that is woven in a plain weave after every patterning weft pick. To throw in a knitting analogy, while applied differently, the tabby weft can be thought of similarly as tacking long floats in colorwork.

If you are new(er) to weaving and are looking to expand your knowledge of overshot, along with the Weaver’s Book of 8-Shaft Patterns, I cannot recommend the following book enough: Weaving Designs by Bertha Gray Hayes: Miniature Overshot Patterns, by Norma Smayda , Gretchen White, Jody Brown, & Katharine Schelleng.

I have both 8 shaft looms, a computer-dobby  24 shaft loom, and a very large drawloom. I design for all three types of looms. In the shop I have decided to mark the number of shafts needed for a draft at the top of the description so as not to disappoint a weaver. You will know what you purchasing before you hit the download button. I also also elected to include weaving software files and manual draft files in the same draft archive packages so that people no longer have to choose one or the other.

A few more words about the work I believe I can deliver to the public. I like to design drafts and weave it before I post it to ensure accuracy, but at this point some days I do more designing than weaving. I think I would like to work out a system with a fellow weaver(s), I would like to see I if can afford to pay a weaver to weave samples of these designs that I can post on the website and give credit for the work that was done. I have no worries if you determine that you would like to weave the design for production and sell items. I am aware that drafts can not be copyrighted, and so will not chase you down if you use a my design for sale in your shop. As I have mentioned before, it is not my intent to be a production weaver. If a weaver were interested in this type of arrangement, I would ask that you email me directly with what your financial requirements might be for making samples and what type of loom (mostly number of shafts) you are using for sampling. Sample sizes should be 10″ x 10″  or larger if the draft  requires it for a full repeat. I am interested in high contrast samples so that it is clear to the weaver what is happening between the warp and weft threads.

If I offer an handwoven item in my shop for sale it is most likely to be a one of kind – if it is not, the size of the edition will be stated. I have no desire to weave long warps of the same pattern. It slows me down once I have solved the design problem, I like to move on to the next. I like efficiency, but I am far more likely to want to achieve accuracy, especially in complex structures. I have been known to weave,  unweave and rethread multiple times until I get the loom to match the draft. I spend more time finding ways to warp and weave better. I am known to innovate. If someone asks me how long it took to weave this particular item, it is hard to answer directly because I have to determine if should I tell you about all of the samples I made before I achieved success. (Again, note, I am not a production weaver). What will make my hand woven gifts special is you can be certain that you will not find another one just like it anywhere. When I use my looms I use them as close to their full capability as possible. My personal patterns are complex on purpose, I have a special hand loom, a 100 shaft combination drawloom and I like to show what it can do. To purchase a handwoven piece from me, pricing includes the cost of overhead for maintaining full weaver’s studio, time spent learning about weaving, the cost of materials and fact the item is unique. Your purchase dollars support my research efforts directly. I reinvest my profit dollars into the website and new weaving history research opportunities.

I have taken the time to record some of the larger coverlet radiating overshot pattern drafts in profile draft form making them more accessible to weavers who use drafting software. From the profile you can try different structures, colors and layouts to find a design that is pleasing to you. I have built instructions that show you how the draft is composed and how it can be modified. I would like to think of it as giving you design components more than a formal project plan. If you want the formal project plan approach use the Woven as Drawn in instructions. My goal in my presentation is to increase your understanding so that you can design your own projects and not not to restrict you to copying standardized patterns.

I added an eBook/PDF and draft package for Radiating Overshot Patterns  – Sunrise, Blooming Leaf, Bow Knot and the Double Bow Knot. These designs include full drafts, profile drafts and woven as drawn-in drafts. This is the link to purchase the draft archive and the instruction ebook: https://historicweaving.com/wordpress/product/radiating-patterns-for-historic-overshot/

The Radiating Patterns ebook shows you how the drafts are related, the Draft Archive catalog details all of the profiles for easy reference to file names, and there are more than 68 drafts in the package. Included are the Lee’s Surrender, Sunrise and Blooming Leaf coverlets drafts. These drafts are the Series IV groups a,b,c and d – radiating patterns. From Mary Atwater’s original work combined with any examples I could find in digital museum collections that had no accompanying drafts with them.

Completion of the documentation of the reticule from the Montana Historical Society Museum. Can be woven on a 4 shaft loom. The structure is Honeysuckle Twill.

A contemporary version of the Lee’s Surrender draft, using a unit tie weave that can be woven on 6 shafts. In this archive there are colored versions of Lee’s Surrender as found in museum collections.

Like all new weavers I tried many techniques. One technique, overshot, I have tried only twice. There is a pattern called Norse Kitchen on page 186 in the book. I wove this table runner on a four shaft table loom and only made one mistake! I was so proud of it. It is woven in cottolin.

I signed up for the Discover Color Weave-Along! last week. I am weaving mug mats in overshot on 8 shafts. Five thousand weavers have also joined the workshop which is free. This is a 3-week weave-along delivered via an online course with plenty of information. https://www.warpandweave.com/classes/discover-color/

I am using cottolin instead of 8/2 cotton sett at 18 epi. Here is my first attempt on the loom. I am using a double cottolin thread for the pattern weft. I have a useful shuttle which takes two bobbins.

The workshop indicates that the mug mats should be about 8" by 8" but perhaps the cottolin is making the dimensions different. The first red mat is 6.5 inches in width and 8.25 inches in length. Examining it closely I can see that the plain weave tabby has not been beaten in hard enough. The sett is 18 epi.

This post is the third in a series introducing you to common weaving structures. We’ve already looked at plain weave and twill, and this time we’re going to dive into the magic of overshot weaves—a structure that’s very fun to make and creates exciting graphic patterns.

Overshot is a term commonly used to refer to a twill-based type of weaving structure. Perhaps more correctly termed "floatwork" (more on that later), these textiles have a distinctive construction made up of both a plain weave and pattern layer. Requiring two shuttles and at least four shafts, overshot textiles are built using two passes: one weaves a tabby layer and the other weaves a pattern layer, which overshoots or floats, above.

Readers in the United States and Canada may be familiar with overshot textiles through woven coverlets made by early Scottish and English settlers. Using this relatively simple technique, a local professional weaver with a four-shaft loom could easily make a near-infinite variety of equally beautiful and complex patterns. If you’d like to learn more about overshot coverlets and some of the traditions that settlers brought with them, please see my reading list at the bottom of this article!

As it is twill-based, overshot will be very familiar to 4 shaft weavers. It’s made up of a sequence of 2-thread repeats: 1-2, 2-3, 3-4, and 1-4. These sequences can be repeated any number of times to elongate and create lines, curves, and shapes. These 2-thread repeats are often referred to as blocks or threading repeats, IE: 1-2 = block 1/A, 2-3 = block 2/B.

There are three ways weft appears on the face of an overshot cloth: as a solid, half-tone, or blank. In the draft image I’ve shared here, you can see an example of each—the solid is in circled in blue, the half-tone in red, and the blank yellow. Pressing down the first treadle (shafts 1 and 2), for example, creates solid tones everywhere there are threads on shafts 1 and 2, half-tones where there is a 1 or 2 paired with 3 or 4, and nothing on the opposite block, shafts 3 and 4. Of course, there’s not really nothing—the thread is simply traveling on the back of the cloth, creating a reverse of what’s on the face.

Because overshot sequences are always made up of alternating shafts, plain weave can be woven by tying two treadles to lift or lower shafts 1-3 and 2-4. When I weave two-shuttle weaves like overshot, I generally put my tabby treadles to the right and treadle my pattern picks with my left foot and my tabby with my right. In the draft image I’ve shared above, I’ve omitted the tabby picks to make the overarching pattern clearer and easier to read. Below is a draft image that includes the tabby picks to show the structure of the fabric.

Traditional overshot coverlets used cotton or linen for warp and plain weave wefts, and wool pattern wefts—but there’s no rule saying you have to stick to that! In the two overshot patterns I’ve written for Gist, I used both Mallo and Beam as my pattern wefts.

In the Tidal Towels, a very simple overshot threading creates an undulating wave motif across the project. It’s easy and repetitive to thread, and since the overshot section is relatively short, it’s an easy way to get a feel for the technique.

The Bloom Table Squares are designed to introduce you to a slightly more complex threading—but in a short, easy-to-read motif. When I was a new weaver, one of the most challenging things was reading and keeping track of overshot threading and treadling—but I’ve tried to make it easy to practice through this narrow and quick project.

Overshot works best with a pattern weft that 2-4 times larger than your plain weave ground, but I haven’t always followed that rule, and I encourage you to sample and test your own wefts to see how they look! In the samples I wove for this article, I used 8/2 Un-Mercerized Cotton weaving yarn in Beige for my plain weave, and Duet in Rust, Mallo in Brick, and Beam in Blush for my pattern wefts.

The Bloom Table Squares are an excellent example of what weavers usually mean when they talk about traditional overshot or colonial overshot, but I prefer to use the term "floatwork" when talking about overshot. I learned this from the fantastic weaver and textile historian Deborah Livingston-Lowe of Upper Canada Weaving. Having researched the technique thoroughly for her MA thesis, Deborah found that the term "overshot" originated sometime in the 1930s and that historical records variably called these weaves "single coverlets’ or ‘shotover designs.’ Deborah settled on the term "floatwork" to speak about these textiles since it provides a more accurate description of what’s happening in the cloth, and it’s one that I’ve since adopted.

This book contains the collected drafts and work of Frances L. Goodrich, whose interest in coverlets was sparked when a neighbor gifted her one in the 1890s. Full of charming hand-painted drafts, this book offers a glimpse into North Carolina’s weaving traditions.

I am attempting some upholstery fabric for the first time and decided on Brassard 8/2 cottolin for the warp and Harrisville Shetland for the weft. The structure is “Waldenweave” from Bertha Gray Hayes collection of miniature overshot…. I am developing a “thing” for overshot and really like all aspects of it.

I am attempting some upholstery fabric for the first time and decided on Brassard 8/2 cottolin for the warp and Harrisville Shetland for the weft. The structure is “Waldenweave” from Bertha Gray Hayes collection of miniature overshot…. I am developing a “thing” for overshot and really like all aspects of it.

An old pattern in overshot weaving that has had many names over time: Muscadine Hills, Hickory Leaf, Blooming Leaf. The Double Bow Knot name comes from the leaf like square that forms the larger portion of the design. The dark square is called a table. #weaving #overshot #coverlet #history

Pattern is designed to use our Organic cottolin (Cotolin) to weave 4 placemats- finished size 14"X20", 4 napkins 14"X14" and a runner with a finished size 14"X38". Requires an 8 shaft loom, 24 epi, 15" wide. 1 tube each of our 4 Ruby Anniversary colors Vendor item: HYPattern

Related items:15 3/4" 8 shaft loom, 12 dent reed double sleyed, shuttles, 4 bobbins. Pattern gauge: 12 dpi Yarn weight: Lace Yardage needed:1 tube each of 4 colors. We used 2 reds 5096 & 5116, and 2 purples 8264 & 5153.

Over three years ago, when my David Louet floor loom was still somewhat new to me, I wrotethis post on overshot. If you read it, you will discover that my initial relationship with overshot was not a very positive one.

The happy ending to the initial overshot sob story is that I can weave overshot now. Quite well, in fact! And I also teach it. And I happen to love it, very, very much. Don’t you love a happy ending?

I don’t think there was any particular moment where I thought to myself “I can weave overshot now!” I didn’t even weave any overshot for quite some time after that initial attempt. But slowly it tempted me back, and we started over. It was just a matter of sticking with it, employing some specific techniques and practice, practice, practice until it feels like an old friend.

My love of overshot has only increased with my more recent discovery of American Coverlets. I loved the look of the coverlets and the history behind them before I realised that so many of them were woven in the wonderfully humble 4 shaft overshot.

Now that I have quite a lot of experience weaving overshot, I want to share my best overshot tips with you in hope that you too will fall in love with this wonderful weave structure.

To weave overshot you need a warp yarn, a tabby yarn and a pattern weft yarn. Using the same yarn for warp and tabby works perfectly. For the pattern weft, I like to use a yarn that is twice the size of the tabby/warp yarn. I have experimented with using doubled strands of tabby/warp yarn in a contrasting colour, but it just doesn’t look as good. A thicker pattern yarn is the way to go.

What will the size of your item be? A miniature overshot pattern may get lost in a blanket, but may be perfect for a scarf. As a general rule, a good way to estimate the size of one repeat of your pattern just by looking at the draft is to see how many repeats are in one threading repeat. Also consider the thickness of your yarns and the sett you intend to weave.

Just to give you an idea, my current project is woven at 20 ends per inch with 8/2 cotton for warp and tabby and fingering weight wool for the pattern weft. The weaving draft has 50 threads in one threading repeat. My design repeats on the loom are around 2.5″ wide and just under 5″ long, which is a great size for the 30″ x 99″ throw I’m weaving.

This is a non negotiable for overshot if you want neat edges and less headaches! You get used to using floating selvedges very quickly, so don’t stress if you have no experience with them.

Besides the thickness of the pattern weft yarn, you will also want to consider what kind of bloom it may have after wet finishing. For example, I know that my fingering weight wool blooms beautifully, whereas a cotton of the same size would not bloom in the same way. I very much like the contrast of the 8/2 cotton background with the plump wool pattern weft.

There are 6 treadles needed for overshot, even though you weave on 4 shafts. The two extra treadles are for the tabby weave. I always set up my pattern treadles in the centre of the loom – two on the left and two on the right. Then I set up a “left” tabby and a “right” tabby treadle. To do this on my 8 shaft loom I leave a gap between the pattern treadles and the tabby treadles so that my feet can “see” and differentiate between a pattern and tabby treadle.

I like to advance little and often. You will find your own preference or “sweet spot” for weaving, but I find that with overshot I advance a lot more frequently at a much smaller amount than I do usually.

An example of this is that I wove an overshot sampler right before Is started my main project (the throw). It was a narrow warp (around 8″) and a different overshot threading and treadling than I’m using for the project.

I personally do not use a temple. Some weavers will say they won’t weave without one. I’ve tried using a temple on many of my projects, particularly if I’m getting broken edge warp threads (signs of tension problems and too much draw in). But I will avoid using one wherever I can get away with it, and I don’t use one for weaving overshot.

Are you wondering what the other looms are that circle the new one in the center? Starting with the loom on the left and going around clockwise: 10-shaft, side tie-up, 4-shaft loom, 40-shaft dobby built by Jim Ahrens in the 1940’s, and my love, the 4-shaft loom made of bird’s eye maple wood which I have used exclusively for years and years. Going to 12 is a giant and exciting step for me!

Here she is—a real sweetie. I’ve been trying to reduce and give away things but this loom from Jan Langdon I fell in love with years ago. When she decided to down size, she said I was the only person who had longed for it. It is a 12-shaft dobby about 36” wide. Note that in the photo, my 10-shaft loom with a side tie-up is back behind the new loom. Small in a way but the dobby will increase my capacity for new structures greatly.  I’ve been wanting to weave a structure for years and finally decided to do it until I realized I would run out of treadles. The dobby solves that problem. Two treadles work the mechanism to raise the shafts. Notice it is on wheels—that has been very handy already. I just need a pillow on my bench.

A close-up shows the pegs in the bars. A special tool makes it easy to ‘peg’ each shed. The holes without pegs are the shafts that will go up. Since there are 12 shafts, there are 12 holes in each bar. When the right treadle is pressed, the mechanism raises the shafts for one bar—one shed. When the left treadle is pressed, the shed closes and the mechanism readies itself for the next shed. When all the holes are filled nothing will go up. It’s a way to mark the end of a repeat.

Here is the first thing I’ve woven! I wanted to shade the 12-shaft satin weave to go from only the warp showing graded to only the weft showing. The white warps are shiny spun silk (2 different yarns) and the weft is handspun silk from Bhutan that is not shiny.Then I dyed the piece lightly in black walnut dye. I was hoping the shades of the color would contrast more, to go in shades from light to dark–but that is what I’ll work on next. I thought the two yarns—one shiny and one mat would contrast more when in the dye. Lately I’ve been weaving cloth for the dye pot—really fun to weave and get my creative juices flowing.

Hilary is weaving twill blocks on a draw loom. The pattern shafts are arranged as for the profile draft. What a great way this is to promote understanding of how profile drafting can be used. It’s also a fun experience.

Fabrics include 4 and 8 shaft overshot, crackle, atwater and bronson lace, summer and winter, twill blocks. The following images were taken late on the last day when the lighting wasn’t all that good.

There was enough warp left over on two of the “overshot” looms for me to play. There had been much discussion on the length of supplementary weft floats when weaving overshot. So the challenge was for me initiated by the students was to find ways to make use of these long floats to make interesting fabrics. I’ll share these 3 experiments. It was a great way to clear the looms and to enable students to really appreciate the potential of a structure.

When weaving multishaft overshot (a 4 shaft profile draft converts to 8 shafts of structure) each block can be woven independently. This meant that I elected to use just the half tones with just weft floats on the front to weave this fabric. The pleating will stretch because of the wool/lycra yarn that was used. The finished result and the reverse side and before laundering.