how to weave overshot in stock

One of the great things about having been a blogger for 12 years (did I actually just admit that?!) is that you occasionally get to look back and see how very far you’ve come.

Over three years ago, when my David Louet floor loom was still somewhat new to me, I wrotethis post on overshot. If you read it, you will discover that my initial relationship with overshot was not a very positive one.

Back then, I was a little harder on myself as a learning weaver. By now, I’ve realised that weaving, just like life, is a journey that has a beginning but no end. Back then, I thought that my ultimate goal was to be a “master weaver”.

Honestly, I don’t even really know what that means but it no longer matters to me. I just want to be the best weaver I can be, but even more importantly, to continue to be fulfilled, challenged and rewarded by doing it.

The happy ending to the initial overshot sob story is that I can weave overshot now. Quite well, in fact! And I also teach it. And I happen to love it, very, very much. Don’t you love a happy ending?

I don’t think there was any particular moment where I thought to myself “I can weave overshot now!” I didn’t even weave any overshot for quite some time after that initial attempt. But slowly it tempted me back, and we started over. It was just a matter of sticking with it, employing some specific techniques and practice, practice, practice until it feels like an old friend.

My love of overshot has only increased with my more recent discovery of American Coverlets. I loved the look of the coverlets and the history behind them before I realised that so many of them were woven in the wonderfully humble 4 shaft overshot.

I’ve put a lot of research time into coverlets this year and have made it a big weaving goal of mine to weave my first coverlet, which is quite an undertaking, but I relish the thought.

Now that I have quite a lot of experience weaving overshot, I want to share my best overshot tips with you in hope that you too will fall in love with this wonderful weave structure.

I know, I know, sampling takes time and yarn, it’s true. But it teaches you so, so much. It can also be more economical, as you can test your yarns out for suitability before committing to a larger project. Trust me, sampling is so well worth the time!

To weave overshot you need a warp yarn, a tabby yarn and a pattern weft yarn. Using the same yarn for warp and tabby works perfectly. For the pattern weft, I like to use a yarn that is twice the size of the tabby/warp yarn. I have experimented with using doubled strands of tabby/warp yarn in a contrasting colour, but it just doesn’t look as good. A thicker pattern yarn is the way to go.

What will the size of your item be? A miniature overshot pattern may get lost in a blanket, but may be perfect for a scarf. As a general rule, a good way to estimate the size of one repeat of your pattern just by looking at the draft is to see how many repeats are in one threading repeat. Also consider the thickness of your yarns and the sett you intend to weave.

Just to give you an idea, my current project is woven at 20 ends per inch with 8/2 cotton for warp and tabby and fingering weight wool for the pattern weft. The weaving draft has 50 threads in one threading repeat. My design repeats on the loom are around 2.5″ wide and just under 5″ long, which is a great size for the 30″ x 99″ throw I’m weaving.

I throw my picks gently to avoid drag on the selvedges and therefore preventing excessive draw in. I give a generous angle to the weft pick and keep it soft at the edges. I do adjust the picks at the edges before beating when necessary, but mostly I prefer to leave them alone and let them settle into place on their own.

This is a non negotiable for overshot if you want neat edges and less headaches! You get used to using floating selvedges very quickly, so don’t stress if you have no experience with them.

This is another selvedges tip. I’ve experimented with crossing the two weft yarns at the selvedge to see whether it gives a neater edge, but it doesn’t, at least for me. So, instead of twisting the two wefts at each selvedge when throwing a new pick, I just let them follow one another sequentially and my edges are much neater that way.

Besides the thickness of the pattern weft yarn, you will also want to consider what kind of bloom it may have after wet finishing. For example, I know that my fingering weight wool blooms beautifully, whereas a cotton of the same size would not bloom in the same way. I very much like the contrast of the 8/2 cotton background with the plump wool pattern weft.

I’m going to sound like a broken record, but once again, a sample will show you everything you need to know about how your yarn will behave as a finished piece.

I’m often surprised by the potential of yarns to leach dye in the wet finish process. I’ve had certain yarns that I’ve used frequently that will leach dye sometimes and not others.

This is a particular problem if your colours and white on red or navy on white – you want to preserve that white and not have it come out of the wash as a pink or light blue!

The best way to avoid this is through vigilance, especially in the first 10-15 minutes of your woven piece making contact with water. If you see dye beginning to run, take it out of the warm wash and rinse in cold water until the water runs clear. Place back in the warm water and maintain your watch on it. Repeat the rinsing process if needed.

There are 6 treadles needed for overshot, even though you weave on 4 shafts. The two extra treadles are for the tabby weave. I always set up my pattern treadles in the centre of the loom – two on the left and two on the right. Then I set up a “left” tabby and a “right” tabby treadle. To do this on my 8 shaft loom I leave a gap between the pattern treadles and the tabby treadles so that my feet can “see” and differentiate between a pattern and tabby treadle.

I like to advance little and often. You will find your own preference or “sweet spot” for weaving, but I find that with overshot I advance a lot more frequently at a much smaller amount than I do usually.

The firmness of beat will depend on a few things. Your chosen yarns, the weave structure, the width of the project and the tension your warp is under are all important considerations. I let the project dictate.

An example of this is that I wove an overshot sampler right before Is started my main project (the throw). It was a narrow warp (around 8″) and a different overshot threading and treadling than I’m using for the project.

But for my throw project, I am beating harder and sometimes having to beat twice. Because of the width of the project, I need to be careful that I’m beating evenly, and that is easier to do if I’m beating more firmly.

I personally do not use a temple. Some weavers will say they won’t weave without one. I’ve tried using a temple on many of my projects, particularly if I’m getting broken edge warp threads (signs of tension problems and too much draw in). But I will avoid using one wherever I can get away with it, and I don’t use one for weaving overshot.

Lots of people think that overshot must be a complicated 8-shafts-and-above weave structure, but that is far from true. Most overshot designs can be woven on 4-shafts, and once you get into a weaving rhythm of pattern-tabby-pattern-tabby, weaving goes smoothly as the beautiful patterns emerge on your loom. That said, designing and weaving overshot requires a bit more concentration than plain weave.

Here are five tips from designer Pattie Graver, author of Next Steps in Weaving, to ensure great overshot results. The first three are probably ones you’ve already heard about weaving other structures, but the last two are about looking at overshot designs and color choices in a mindful way.

I follow the advice of Helene Bress in The Weaving Book: “Identify a diagonal line that appears in the cloth as you weave and try to keep that at 45 degrees.” I keep a protractor by my loom!

Consider putting on at least an extra yard of warp in order to get a feel for the draft. This will allow you to test for proper beat, colors, and other “what-ifs.” I often put on a 6-yard warp and use at least half of the warp for sampling.

You may wish to choose a different starting/stopping point than the one specified. As you study the drawdowns, you will discover that some drafts have small sections that can be woven separately from the overall design.

A small portion of the overall pattern makes a nice border on this Primrose Table Runner designed by Norma Smayda and woven by Ann Rudman, Handwoven November/December 2017. Photo by George Boe.

If warp and pattern weft are too close in value, the overshot designs will not appear in strong contrast. Remember, too, that the eye follows light, so bits of lighter pattern weft add interest to the cloth.

Debbi Rutherford used name drafting to create this overshot pattern and then used a variegated yarn for her pattern weft. Handwoven January/February 2017. Photo by Joe Coca.

While it looks like it would be a very time-intensive and difficult technique to weave – it really isn’t! You just have to understand how and why it works the way it does. (We will get to that.)

This page may contain affiliate links. If you purchase something through these links then I will receive a small commission – at no extra cost to you! Please read our

In its simplest form – overshot is a weaving technique that utilizes at least 2 different types of weft yarns and floats to create a pattern. These patterns are often heavily geometric.

Ground weft– plain weave pattern that is used between each row of your overshot pattern. This plain weave gives the textile structure and allows for large areas of overshot to be woven without creating an overly sleazy fabric. Without the use of a ground weft on an overshot pattern, the weaving would not hold together because there would not be enough warp and weft intersections to create a solid weaving.

They were most popular though in southern Appalachia and continued to be so even after textile technologies advanced. When other parts of colonial America moved to jacquard weaving, the weavers of southern Appalachia continued to weave their overshot coverlets by hand.

Since the overshot coverlets were most often woven at home on smaller looms they usually had a seam down the middle where two woven panels were sewn together.

The thing about overshot is that no matter the application, it is pretty impressive. Perhaps that is just my opinion, but due to how complex it can look, I feel that it is pretty safe to say.

In the image below you can see the ground weft is not the same color throughout. Instead, I wove the ground weft as discontinuous so that I could add extra pattern and design into the weavings. In this case, you may be wondering how to deal with your weft yarns when they are in the middle of the weaving and not at the selvage.

The discontinuous weft yarns will float onto the back of the weaving until you are ready for them in their next pick. This does make your overshot weaving one sided since it will have vertical floats on the back. Keep this in mind if you want to try this technique out.

Also seen in the image above, the overshot yarn that I used was not all one color! This is a really simple way to get extra dimension and interest in your overshot if that is something you are looking for.

This makes it simple to be able to only weave overshot in certain parts of your weaving. If you want to do this then you can continue to weave your plain weave across the entire width of your weaving, but only weave overshot in specific areas. This creates a overshot section that functions similar to inlay.

Since the overshot pattern is strongly influenced by the weft yarns that are used it is important to choose the right yarns. Your weaving will be set up to the specification needed for a balanced plain weave. Make sure you understand EPI in order to get the right warp sett for your overshot weaving.

The ground weft used is almost always the same yarn as your warp. This allows the overshot weft to really be able to shine without contrasting warp and weft plain weave yarns.

In order to get the full effect of the overshot, it must be thick enough that when you are weaving your pattern it covers up the ground weft between each pass. If it is not thick enough to do this, it will still be overshot, but the full effect will not be seen.

Keep in mind the behavior of your yarns and how they will behave once washed. Some yarns will bloom and become fuller after a wash and some will not. Yarns that bloom will fill in your ground weft gaps and create a nicer pattern.

What this warp thread does is serve as an all-purpose selvedge that does not correspond with your pattern. Instead, you would make sure to go around this warp thread every time to make sure that you are able to weave fully to the selvedge. Without this, your overshot weft will float awkwardly on the back of your weaving whenever the pattern does not take it to the edge.

I have mentioned this book multiple times because it really is such a great resource for any weaver looking to weave patterns of all types. It contains 23 pages of different overshot patterns (among so many other patterns) that you can set up on your floor or table loom.

Like a lot of different types of weaving, it is possible to do it on almost any type of loom that you have. The difference being that it might take you a little bit longer or require a bit more effort than if you did it on a traditional floor loom.

Weaving overshot on a frame loom or rigid heddle loom will require the use of string heddles and pick-up sticks that you have to manually use to create a shed.

Overshot is a magical structure. The first time you weave it you can hardly believe the cloth that grows on your loom. Traditionally used to weave bed coverings, overshot has many beautiful applications in today"s world, from useful household textiles to breathtaking works of art. This versatile weave is subject to endless variations. Here are a few of our favorite tips and a few truly spectacular projects, too! If you are inspired, come visit us and learn from a master weaver, Joanne Hall. See details below about her workshop.

A slouchy bag by FiberMusings on Weavolution pairs leftover BFL singles with sturdy Cottolin to create a fashionable yet functional multi-colored bag. The draft is a design from Ann Weaver"s Handweavers Pattern Dictionary, and it"s a great way to integrate Overshot techniques while making an eye-catching accessory!

Another project that caught our eye recently was a shower curtain shared by GailR@30 shared on Weaving Today - it"s nothing short of amazing (click here to see for yourself)! Consisting of thirteen different overshot pattern threadings woven in thirteen different treadlings, 169 different design effects are created based on designs from Osma Gallinger Tod"s book The Joy of Handweaving. As Gail noted on her project page, a great way to make each design stand out is to separate them with twill bands (even though it might mean a little more work in the process!)

Or, you may choose to elevate your weaving like the work of art it most certainly is, as Evaweave did with her Overshot Study pieces. These two miniature silk rugs look lovely in a frame, don"t you think? The overshot pattern was adapted from Overshot Weaving by Ellen Lewis Saltzman, complementing one another perfectly.

Think overshot is too difficult to try? Deb Essen thinks otherwise! Fiber artist, designer, and teacher, Deb is a passionate weaver who specializes in using overshot name drafts to create "secret messages" in cloth.

On her website, she explains: "Overshot is a weave structure and a draft is the weaver"s guide to creating patterns in cloth. Overshot name drafts assign the letters of a name or phrase to the shafts on a loom, creating a pattern that is unique. The one-of-a-kind patterns become a secret hidden message in the cloth and only those knowing the secret can break the code."

Deb lets you in on the secret with her clever kits, each with a hidden message. We"re particularly fond of her That"s Doable kit, which features Mountain Colors hand-painted yarns and, as the name would imply, is our first choice for those new to overshot weaving.

This post is the third in a series introducing you to common weaving structures. We’ve already looked at plain weave and twill, and this time we’re going to dive into the magic of overshot weaves—a structure that’s very fun to make and creates exciting graphic patterns.

Overshot is a term commonly used to refer to a twill-based type of weaving structure. Perhaps more correctly termed "floatwork" (more on that later), these textiles have a distinctive construction made up of both a plain weave and pattern layer. Requiring two shuttles and at least four shafts, overshot textiles are built using two passes: one weaves a tabby layer and the other weaves a pattern layer, which overshoots or floats, above.

Readers in the United States and Canada may be familiar with overshot textiles through woven coverlets made by early Scottish and English settlers. Using this relatively simple technique, a local professional weaver with a four-shaft loom could easily make a near-infinite variety of equally beautiful and complex patterns. If you’d like to learn more about overshot coverlets and some of the traditions that settlers brought with them, please see my reading list at the bottom of this article!

As it is twill-based, overshot will be very familiar to 4 shaft weavers. It’s made up of a sequence of 2-thread repeats: 1-2, 2-3, 3-4, and 1-4. These sequences can be repeated any number of times to elongate and create lines, curves, and shapes. These 2-thread repeats are often referred to as blocks or threading repeats, IE: 1-2 = block 1/A, 2-3 = block 2/B.

There are three ways weft appears on the face of an overshot cloth: as a solid, half-tone, or blank. In the draft image I’ve shared here, you can see an example of each—the solid is in circled in blue, the half-tone in red, and the blank yellow. Pressing down the first treadle (shafts 1 and 2), for example, creates solid tones everywhere there are threads on shafts 1 and 2, half-tones where there is a 1 or 2 paired with 3 or 4, and nothing on the opposite block, shafts 3 and 4. Of course, there’s not really nothing—the thread is simply traveling on the back of the cloth, creating a reverse of what’s on the face.

Because overshot sequences are always made up of alternating shafts, plain weave can be woven by tying two treadles to lift or lower shafts 1-3 and 2-4. When I weave two-shuttle weaves like overshot, I generally put my tabby treadles to the right and treadle my pattern picks with my left foot and my tabby with my right. In the draft image I’ve shared above, I’ve omitted the tabby picks to make the overarching pattern clearer and easier to read. Below is a draft image that includes the tabby picks to show the structure of the fabric.

Traditional overshot coverlets used cotton or linen for warp and plain weave wefts, and wool pattern wefts—but there’s no rule saying you have to stick to that! In the two overshot patterns I’ve written for Gist, I used both Mallo and Beam as my pattern wefts.

In the Tidal Towels, a very simple overshot threading creates an undulating wave motif across the project. It’s easy and repetitive to thread, and since the overshot section is relatively short, it’s an easy way to get a feel for the technique.

The Bloom Table Squares are designed to introduce you to a slightly more complex threading—but in a short, easy-to-read motif. When I was a new weaver, one of the most challenging things was reading and keeping track of overshot threading and treadling—but I’ve tried to make it easy to practice through this narrow and quick project.

Overshot works best with a pattern weft that 2-4 times larger than your plain weave ground, but I haven’t always followed that rule, and I encourage you to sample and test your own wefts to see how they look! In the samples I wove for this article, I used 8/2 Un-Mercerized Cotton weaving yarn in Beige for my plain weave, and Duet in Rust, Mallo in Brick, and Beam in Blush for my pattern wefts.

The Bloom Table Squares are an excellent example of what weavers usually mean when they talk about traditional overshot or colonial overshot, but I prefer to use the term "floatwork" when talking about overshot. I learned this from the fantastic weaver and textile historian Deborah Livingston-Lowe of Upper Canada Weaving. Having researched the technique thoroughly for her MA thesis, Deborah found that the term "overshot" originated sometime in the 1930s and that historical records variably called these weaves "single coverlets’ or ‘shotover designs.’ Deborah settled on the term "floatwork" to speak about these textiles since it provides a more accurate description of what’s happening in the cloth, and it’s one that I’ve since adopted.

Long out of print, this fabulous book covers the Burnham’s extensive collection of early settler textiles from across Canada, including basic threading drafts and valuable information about professional weavers, tools, and history.

This book contains the collected drafts and work of Frances L. Goodrich, whose interest in coverlets was sparked when a neighbor gifted her one in the 1890s. Full of charming hand-painted drafts, this book offers a glimpse into North Carolina’s weaving traditions.

Amanda Ratajis an artist and weaver living and working in Hamilton, Ontario. She studied at the Ontario College of Art and Design University and has developed her contemporary craft practice through research-based projects, artist residencies, professional exhibitions, and lectures. Subscribe to herstudio newsletteror follow her onInstagramto learn about new weaving patterns, exhibitions, projects, and more.

Let’s finish strong in our Overshot 101 series and talk about weaving overshot! Even though it looks complicated, the actual process of creating overshot is completely manageable! You can do it!

In episode 72, I’m arming you with all the core concepts you need to understand how to weave overshot. Use 2 different wefts – one for the background and one for the pattern. After that, it’s really just a matter of wrangling shuttles! No sweat!

Tips for Success – I found a lovely article from Handwoven Magazine (such a great resource!) that includes overshot tips from Pattie Graver. Here’s the beauty of weaving. While I like to keep things basic and easy, there is an entire world dedicated to the technical pieces of the process and it’s important to showcase that side, too! You’ll find some of Pattie’s tips dive into very specific practices, which my really analytical readers will definitely appreciate! Check out her blog post right here.

Overshot 101 – Did you catch the first part of the overshot series? I did an entire video all about dressing the loom for overshot. It will set you up perfectly for today’s video! Just in case you missed it, you can find it here and catch up in no time!

Did you hear the great news? For the month of September, which is Custom Month, I’ll be loading up the AC Insiders with tips and tricks on how to do your own custom projects! Join our online community to jump start your creativity today!Click here to become a member.I can’t wait for you to join us!

And if you would like me to create a fabulous custom project for you, now’s the time! All holiday projects need to be in the queue by October 1 to give me plenty of time to weave something magical, just for you!Head straight to the Custom Pageto get all the details and let’s get to it!

Centerpiece sized handwoven tabletop runner crafted by Kate Kilgus, Harrisville, New Hampshire. Overshot weaving in royal blue and white cottons. This handcrafted textile can be used on the dining table, buffet, bureau, or coffee table. A two shuttle weave, overshot allows for the creation of curves

This project was really popular when I posted it on Instagram, so I thought I would share it here also. It is a simple overshot pattern - with a twist. Also a great way to show off some special yarn. The yarn I used for my pattern was a skein of hand spun camel/silk blend. I wove the fabric on my Jack loom but you could also use your four or eight shaft loom.

Overshot is a weave structure where the weft threads jump over several warp threads at once, a supplementary weft creating patterns over a plain weave base. Overshot gained popularity in the turn of the 19th century (although its origins are a few hundred years earlier than that!). Coverlets (bed covers) were woven in Overshot with a cotton (or linen) plain weave base and a wool supplementary weft for the pattern. The plain weave base gave structure and durability and the woollen pattern thread gave warmth and colour/design. Designs were basic geometric designs that were handed down in families and as it was woven on a four shaft loom the Overshot patterns were accessible to many. In theory if you removed all the pattern threads form your Overshot you would have a structurally sound piece of plain weave fabric.

I was first drawn to Overshot many years ago when I saw what looked to me like "fragments" of Overshot in Sharon Aldermans "Mastering Weave Structures".

I have not included details of number of warp ends, sett and yarn requirements for my project - you can do your calculations based on the sett required for plain weave in the yarn you wish to use.

I wanted to use my handspun - but I only had a 100gms skein, I wanted to maximise the amount of fabric I could get using the 100gms. I thought about all the drafts I could use that would show off the weft and settled on overshot because this showcases the pattern yarn very nicely. I decided to weave it “fragmented” so I could make my handspun yarn go further. I chose a honeysuckle draft.

Warp the full width as per the threading below. You will weave plain weave every other row, the warp yarn and the plain weave base weft yarn should be the same weight. Your pattern yarn should be twice as thick as you base yarn.

When doing the treadle tie-up I used 3 and 8 for my plain weave and started weaving from the left, treadle 3 - so you always know which treadle you are up to - shuttle on the left - treadle 3, shuttle on the right treadle 8. I then tied up the pattern on treadles 4,5,6 and 7. You can work in that order by repeating the sequence or you can mix it up and go from 4 to 7 and back to 4 again etc. You will easily see what the pattern is doing.

Wind two shuttles. One with your plain weave base weft and the other with your pattern yarn. You will weave plain weave between each pattern row. The plain weave always goes across the full width. To weave the pattern rows (green on draft below) take the shuttle through the shed and bring it out through the top of the warp, sit it on the warp and then after the next plain weave row take it back into the warp where it came out and back through the shed.

This post may help explain how my needle pillow cloth was woven. These pieces were made on the same warp. I had made a dozen or so pillow fronts and backs (in plain weave or tabby). Then I got creative and played with ideas of what else could be woven on the same warp. This is a scroll I made. I used the fabric I wove on the needle pillow warp for the background. It measures 7 ¾” x 26” including fringe.

I wove some samples and decided to make this for my scroll. The warp was handspun singles from Bouton. I wanted to see if I could use this fragile cotton for a warp. I used a sizing for the first time in my weaving life. The pattern weft is silk and shows up nicely against the matt cotton.

Here is a piece with two samples. The I used silk chenille that I’ve been hording dyed with black walnuts. In one part I used the chenille as the pattern weft. It looks similar to the needle pillows except I used only 1 block. The tabby was black sewing thread, I believe. For the flat sample, I used the reverse: the chenille for the tabby weft and the sewing thread for the pattern weft. Again I only used one of the blocks.

For this sample I used all sewing thread (easier with only one shuttle.) Again I used only one block and the pattern and tabby wefts were sewing thread. I do love to try things.

Warning!Sometimes the floating wefts don’t seem to meld together. See how the floats snug up to each other in the needle pillows and in the Chenille sample above? Read below.

This illustration and quote are in The Weaving Book by Helen Bress and is the only place I’ve seen this addressed. “Inadvertently, the tabby does another thing. It makes some pattern threads pair together and separates others. On the draw-down [draft], all pattern threads look equidistant from each other. Actually, within any block, the floats will often look more like this: [see illustration]. With some yarns and setts, this pairing is hardly noticeable. If you don’t like the way the floats are pairing, try changing the order of the tabby shots. …and be consistent when treadling mirror-imaged blocks.”

Overshot is perhaps the most iconic weaving technique--think antique coverlets and fancy table runners--yet many weavers are intimidated by its complex-looking structure. But it doesn"t have to be difficult In this book, Susan Kesler-Simpson makes overshot approachable by breaking it down piece by piece so that the weaver understands how it works, and then she puts it all back together so that weavers will have the confidence to make their own overshot patterns or to try any of the 38 overshot projects she has designed for the book. Weavers will learn: -to understand overshot as a derivative of twill -to understand the tie-up, placement of tabby in the tie-up, threading, and treadling -how to choose threads for overshot -how to use borders in your designs -how to set up the loom for overshot -how to work an overshot gamp Projects include: -Blankets -Shawls -Scarves -Christmas ornaments -Table runners -Placemats -Napkins -Others "Susan"s explanations are to the point and easy to understand. When you read through the chapters, it"s as if Susan is sitting there with you, telling you in a friendly voice how to weave overshot step by step."--excerpt from the Foreword by Tom Knisely.

Overshot is perhaps the most iconic weaving technique--think antique coverlets and fancy table runners--yet many weavers are intimidated by its complex-looking structure. But it doesn"t have to be difficult! In this book, Susan Kesler-Simpson makes overshot approachable by breaking it down piece by piece so that the weaver understands how it works, and then she puts it all back together so that weavers will have the confidence to make their own overshot patterns or to try any of the 38 overshot projects she has designed for the book.

Tied overshot, often called stars and diamonds weave, evokes images of pretty weaving patterns.  Having read several articles about it, I learned that tied overshot is well known for being a traditional Colonial coverlet weave used in Pennsylvania in the nineteenth century.  It looks like overshot, but is more closely related to summer and winter.

I read Clotilde Barrett’s article, “Coverlet Weaves Using Two Ties” (Weaver’s Journal, April 1979 issue #12, downloadable from handweaving.net).  This excellent article has photos of various samples with drafts and notes, and I was particularly interested in the photo of the sample in Plate 6.  The article mentions Dorothy K. and Harold B. Burnham’s notable book, Keep Me Warm One Night, that refers to the weave of this sample as “stars and diamonds.”  To better understand how to design such a weave, I closely studied the chapter on tied overshot in Madelyn van der Hoogt’s book, The Complete Book of Drafting for Handweavers, one of my favorite books on drafting.  I then designed and wove a bunch of samples and three tied overshot table runners.  In this post I’ll be sharing, among other things, photos, drafts, and notes about these runners starting with this blue runner:

In many traditional coverlets the warp and the tabby (plain weave) weft are often thinner cotton yarns and the pattern weft is a thicker worsted wool yarn.  For my table runners I chose yarns that I had in my stash:  thin 16/2 soy silk for the warp and tabby weft and a thicker 5/2 pearl cotton for the pattern weft.  All three runners were woven on the same warp with a sett of 30 e.p.i.  They were all wet finished by hand and steam ironed.

To design the 12-shaft draft shown above, I adapted the tie-up from the draft in Figure 7 in Clotilde’s article, and the threading and treadling from the chapter in Madelyn’s book on tied overshot, Figure 11b:  “Uneven 2-tie overshot: 5 thread half-unit.”  In other variations the size of these units can vary.  I also want to mention that you can design new patterns using the same threading and treadling by simply making changes in the tie-up.  For example, in the partial draft above you can make changes to the tie-up within the area marked by the yellow rectangle to design new patterns.  That’s what I did and wove the other two runners on the same warp.  There are no stars in the red one and the mauve one is mostly just diamonds:

Some of the articles I read refer to John Landes’ draft No. 76 (14 shafts) as “stars and diamonds.”  I was curious about it and found it in A Book of Patterns for Hand-Weaving; Designs from the John Landes Drawings in the Pennsylvania Museum; drafts and notes by Mary Meigs Atwater.  It’s downloadable from handweaving.net, and you can find it there if you search in “Documents” and then “Key Words” and enter “John Landes.”  It doesn’t seem to come up when you search by “Author.”  I plugged the info from the draft into my weaving software and it looks like this:

I also found online a PDF version of Tom Knisely’s March/April 2006 article in Handwoven magazine, “Stars and Diamonds – for a show towel on fourteen shafts.”  I think the John Landes draft was used for the towel.  This is a nice article with detailed drafts and step-by-step instructions.  For more on tied overshot and related weaves there are many excellent articles in Weaver’s magazine issue #19 (4th quarter 1992), the theme is friendship coverlets.