overshot gate manufacturer

WATERMAN TILTING WEIR (OVERSHOT) GATESare an overflow-type gate used to control levels in canals, basins and other agricultural, municipal and industrial applications.

The basic gate design uses a rectangular panel mild steel panel that is mounted to a piano hinge at the forward bottom edge of the gate leaf.    This leaf is raised and lowered using a cable drum hoist to control the upstream water level.

Mueller refers to one or more of Mueller Water Products, Inc., a Delaware corporation ("MWP"), and its subsidiaries. MWP and each of subsidiaries are legally separate and independent entities when providing products and services. MWP does not provide products or services to third parties. MWP and each of its subsidiaries are liable only for their own acts and omissions and not those of each other. Mueller brands include Mueller®, Echologics®, Hydro Gate®, Hydro-Guard®, HYMAX®, i2O®, Jones®, Krausz®, Mi.Net®, Milliken®, Pratt®, Pratt Industrial®, Sentryx™, Singer®, and U.S. Pipe Valve & Hydrant. Please see muellerwp.com/brands to learn more.

Overshot gates (also known as pivoting weir gates) are used to control upstream water levels. Versatility, efficiency, and safety are the primary reasons the Fresno Overshot Gate is the method of choice for municipal, agricultural, and industrial canal water control.

Waterman Canal Gates offer reliable water control on canal and pipeline systems and are built-to-last and designed for years of reliable service, offering a typical field life exceeding 40 years.Learn More

Waterman Roller Gates are designed to control flow and reduce operating loads for high head applications, large loads, or where frequent operation is required. Stainless steel, permanently-lubricated wheels are mounted on each side of the gate. The wheels operate on rails mounted to each side of the opening.Learn More

Waterman Tilting Weir (Overshot) Gates are an overflow-type gate used to control levels in canals, basins and other agricultural, municipal and industrial applications.Learn More

Waterman Self Regulating Tide Control Gates are ideal for tidal wetlands preservation and restoration. The gates restore tidal flushing of marshes without flooding of upland property behind dikes and levees.Learn More

Waterman C-8 Slide Ditch Gates are the most advanced, easiest operating, tightest sealing gate of its type and price in the field of water control. Most commonly used on ditch turnouts and similar low head operations, this ruggedly designed, press-formed, all steel gate holds in any position for easy flow regulation, seals positively, slides easily, and does not load with sand or silt.Learn More

Waterman Tilting Weir (Overshot) Gates are an overflow-type gate used to control levels in canals, basins and other agricultural, municipal and industrial applications.

The basic gate design uses a rectangular panel mild steel panel that is mounted to a piano hinge at the forward bottom edge of the gate leaf.    This leaf is raised and lowered using a cable drum hoist to control the upstream water level.

We manufacture a watertight aluminium overshot gates to a maximum size of 1200 high x 1800 wide. The door is hinged at sill level and is controlled by a boat winch. The door frame requires no permanent fixing to structure so it can be shifted to a new structure when field rotation occurs.

Split Gate – a WT innovation producing the best Check Structure options available– two blades in one frame (bottom up and top down). Standardsingle or double stem for debris/silt removal and emergency large flow dumps and Independent Blade where both blades operate independently for double blade automation.

“Smart” Sluice Gates – another WT innovation –  WT gates with integrated Controller (PLC), add telemetry for integrated Actuator and RTU in one enclosure.

An overflow style adjustable weir that consists of a rectangular steel panel, hinged across the bottom, which is raised and lowered by two cables attached to the upper corners of the gate leaf. Basically, liken it to a drawbridge placed in a canal.

The Overshot Gate is simply an overflow style adjustable weir. It consists of a rectangular steel panel, hinged across the bottom, which is raised and lowered by two cables attached to the upper corners of the gate leaf. Basically, liken it to a drawbridge placed in a canal.

The upstream water level is controlled (and can be measured) by raising or lowering the gate leaf via the cable hoist system which can be operated either manually or electrically. Hydraulically, the overshot gate is a moveable weir.

The BayDrive is a remotely operated farm canal gate actuator that makes surface irrigation less labor-intensive and more flexible so you can improve yields and reduce water use.

The BladeValve is a remotely operated high-flow pipe valve that makes surface irrigation less labor-intensive and more flexible, providing the freedom to irrigate without having to be on-site.

CableDrive is Rubicon’s actuation system designed to provide precision gate position accuracy and repeatability in harsh environments. The drive is a wire rope (cable) and drum mechanism that provides positive drive in both the raise and lower directions. It is designed for high duty cycle operation and provides precise gate positioning to within ±0.5mm (±0.02in).

The drive is managed by Rubicon’s SolarDrive technology – a purpose-built integrated circuit board that manages gate positioning, solar power regulation, battery charge and the pedestal user interface.

AWMA"s Combination Gates have independently actuated gate leaves; allowing the upper gate leaf to be adjusted independently of the lower leaf/s (and vice versa), allowing flow under and/or over all gate leaves, as well as the option to raise gate leaves entirely out of the waterway for peak flow conditions.