overshot loader brands

There have been numerous attempts at creating overshot loaders down the years. Patent records from the late 50s and early 60s show as much, but none have survived in the market.

A major manufacturer recently registered a provisional patent of their version of such a loader, illustrating that the search for a workable design continues. A google search of overshot loaders offers insight into some of the early attempts.

Gurtech’s cam-based design uses modern hydraulics and drivetrains in their provisional patent. The company has built a low-budget prototype with the objective of proving that their 10 tonne machine can be as productive and more cost effective than a standard 15 tonne articulated wheel loader.

Track loaders are a mainstay of the construction industry, and for good reason. These powerful machines can do some serious heavy lifting. But with so many different specifications to choose from, how do you determine the best model for your needs? Narrow down your options with the following guide from Stribling Equipment.

If you’re looking for more advice, feel free to ask the qualified staff at your local Stribling Equipment dealership. You can find plenty of track loaders for sale at our locations across Tennessee, Mississippi, and Arkansas.

Track loaders come in various shapes and sizes, so consider the size of your average work area to determine which size you need. Small job sites will require a more compact model that can easily navigate tight spaces. Meanwhile, large loaders can cover more ground faster, making them ideal for expansive work areas.

Your track loader is a long term investment, so remember to account for your company’s future when deciding which model to purchase. Your needs may look different in five or ten years, and a high-capacity track loader can serve you through several stages of growth.

Track loaders can be used with a wide range of attachments to tackle a variety of different jobs around the construction site. If you want to take advantage of the track loader’s versatility, just make sure to choose a model that’s compatible with all the attachments you need. Don’t forget to factor in the cost of attachments when assembling your budget.

Far from being just a matter of luxury, operator comfort is a significant factor when it comes to safety and productivity. Busy construction sites are filled with distractions, and when the operator is uncomfortable, it becomes harder to focus. This can both lower efficiency and lead to accidents. Many track loaders feature pressurized cabs for greater protection from the elements, and some models even come with heaters and air conditioners.

Ready to meet some track loaders in person? Visit your nearest Stribling Equipment location and check out our selection. We’re your trusted source for John Deere® track loaders in Tennessee, Mississippi, and Arkansas.

Mucking machines are small compressed air operated front end loaders designed for underground mining. Mucking machines were the first that were introduced in Bisbee mines in the late 1930’s to early 1940’s replacing hand mucking in the crosscuts and later into some stopes. In Bisbee the mucking machines were referred to as Finlay’s (in Bisbee pronounced “Finley”) no matter what brand or model with the exception of Cavo’s. The Finlay name comes from one of the inventors John Finlay who with Edwin Royle developed the first successful design. The Eimco 12B was the dominant mucking machine used underground in Bisbee. The other types of mucking machines used were the Eimco 21, Gardner Denver GD9, Atlas Copco Cavo 310 and 310L. The basic operation of mucking machines is similar between types; the main differences are in the set-ups between drifts and stopes.

The Cavo 310 is basically a rubber tired Finlay with a dump bed attached. These were brought underground in Bisbee for use in the cut and fill stopes. The typical scenario is a open stope with good ground and little timber. The stope will have a pocket with a grizzly on it going to the level below. The Cavo will load its bed from a muck pile and then go and dump into the pocket. The operation of the Cavo is similar to Finlay’s. The mucking should be started on the right side first, this is the blind side of the Cavo and will prevent it from running over boulders which can cause the loader to turn over or throw the operator. The Cavo should be advanced into the muck pile with the bucket down, raise the bucket as the machine is moved forward filling the bucket. Then discharge the load into the Cavo’s dump bed and back the Cavo up a little so the bucket can be lowered to the ground. Repeat this until the dump bed is filled. Then the Cavo is backed up to the pocket and dumped. When mucking, avoid spinning the tires this causes tire damage. The operator needs to always control the Cavo from the platform this will prevent them from running over themselves. The operator will have to pay close attention to the bull hose (4”OD air hose) so it does not get run over. The Cavo’s bounce is greater than Finlay’s because of the tires this makes them very dangerous to operate.

Mucking machine Used in Bisbee Mucker Used in Bisbee Auto loader Finlay in Bisbee pronounced “Finley”

Virtually eliminate lifting, bending, and stretching which are the primary causes of back injury. The Liberty Loader handling system incorporates a turntable to allow nearside loading and calibrated springs position the top layer of the load as pallets are built up and broken down. This maintains a constant working height. No power or air supply is required. Pallet loads to 4,500 lbs can be handled.

Our custom logo overshot cards are the favorites of our ballistic lab. We use a heavier stock material (.045") and apply a water-repellant coating to both sides. The result is an attractive and highly functional overshot card.

Use: Simply place an overshot card on top of the shot charge just before crimping to improve overall crimp quality and seal in small shot and/or buffer. Excellent for use with BPIRoll Crimpers.

Excellent for roll crimpsOur testing lab has proven that poor crimps can alter the performance of an otherwise good load. Overshot cards always produce better, more consistent crimps and this consistency is demonstrated in the standard deviation of loads in our lab. Our ballistic lab recommends overshot cards for better crimps in all loads.

Place an overshot card on top of the shot charge just before crimping to improve overall crimp quality and seal in small shot and/or buffer. Excellent for use with BPI Roll Crimpers.

Our testing lab has proven that poor crimps can alter the performance of an otherwise good load. Overshot cards always produce better, more consistent crimps and this consistency is demonstrated in the standard deviation of loads in our lab. Our ballistic lab recommends overshot cards for better crimps in all loads.

Shotshell size selection:Use the same size gauge as your hull. Smaller diameter cards also work if your particular size is out of stock. For example, a 20ga overshot card works in a 16-gauge shotshell and so on.

Available in Hay and Silage models, the rotating feed rotor provides smooth, uninterrupted crop flow. As the crop comes off the pickup, the tines of the large diameter rotor engage the crop and keep it moving over the top of the feeder (overshot) and into the chamber.

If you look at the action of a front loader, you will see that it does not appear to agitate at all. My Maytag has a rolling motion, not the up and down and spin agitation of the top loaders. You can truly do an equivalent of a handwash in them. I have yet to felt a sweater with it and use it for cleaning vintage crochet work and deconstructed silk ties. I am about to hook up an old top loader as a secondary washer just for fiber work. You can wash raw wool, bypassing the agitation cycle. You can use it for more control on fulling. I will use it for dye experiments. These are two different tools with different qualities.

Front loading washers are GREAT for fulling handwoven fabric! I have only owned front loaders since 1962. You can open them any time you want during a cycle although the process does vary with the brand of washer. My first one, back in the 1960s was a Westinghouse which had a wait time for the machine to unlock after hitting the stop control. It was about a 4 minute wait which wasn"t too bad. After the Westinghouse I had a Maytag and currently have a Bosch, both of which open without a waiting period of that duration. No, the water will not fall out! The front loading tubs are designed with a bit of a backward tilt and since they are a low water machine there is no problem. This is a great factor if you are a city dweller and must pay for your water supply. The fulling process in the front loader gives a more even fulling of fabrics— think of the tumbling motion of the washing tub in this model. The tumbling motion is why this model also is rated much higher in cleaning ability than top loading machines. I would never consider a top loading machine for several other reasons: clothing gets easily tangled, the agitator causes more wear on fabrics, the cost of the water and detergent (more detergent is needed in top washers). You would love a front loading machine!