overshot tool factory

GAOTON Series 150 Releasing and Circulating Overshot is an external fishing tool for engage, pack off and retrieve tubular fish, especially for fishing drill collar and drill pipe. The grapple of the overshot can be designed for different sizes of fish, so one overshot can be dressed with different size of grapple components for fishing different sizes of fish.

GAOTON Series 150 Overshot consists of three outside parts: Top Sub, Bowl, and Standard Guide. The Basic Overshot may be dressed with either of two sets of internal parts, if the fish diameter is near the maximum catch of the Overshot, a Spiral Grapple, Spiral Grapple Control, and Type “A” Packer are used. If the fish diameter is considerably below maximum catch size (½” or more) a Basket Grapple and a Mill Control Packer are used.

Within those famous China oil and gas overshot manufacturers, GAOTON is a professional such supplier, producer and provider, welcome to wholesale petroleum and oilfield API overshot from our factory.

If the tools and equipment listed within this website do not meet your needs, let us work with you to design, develop, and manufacture those products to meet your needs. We are capable of cutting most any material to light tolerance and excellent finish. We have teamed with a number of outside vendors to meet any customer needs if we decide we cannot meet that need in the house.

The Coil Solutions Overshots are used to engage and pull a fish from the well bore. It uses a grapple to bite into the outside of the fish and releases by following through a predetermined rate to disengage the grapple. The tool comes with a range of grapples to accommodate various fish sizes.

Release of the grapple is activated by flowing through a predetermined amount. A pressure differential of 700 psi at the tool will initiate the release of the grapple.

The Coil Solutions Overshots are used to engage and pull a fish from the well bore. It uses a grapple to bite into the outside of the fish and releases by following through a predetermined rate to disengage the grapple. The tool comes with a range of grapples to accommodate various fish sizes.

Release of the grapple is activated by flowing through a predetermined amount. A pressure differential of 700 psi at the tool will initiate the release of the grapple.

Fishing tool is a special fishing drilling tool used to retrieve fallen objects from the borehole. At any stage of the operation, the drill rig operator will encounter unexpected situations, such as falling drill string, stuck pipe, missing drill bit, etc. The equipment that falls into the well is called "fish" or "trash", and the tools used to remove the equipment are called "fishing tools." Sometimes it may be necessary to use "fishing tools" to retrieve older wellbore equipment, such as packers, liners, tubing, or any stuck objects in the well. The drilling tools for fishing must be retrieved from the borehole in order to continue drilling operations.

Overshot is a very common fishing tool. The main fishing object is a smooth tube fish, which belongs to the external fishing type (i.e. catching the external surface of the fish).

Taper tap and die collar are common fishing tools for fishing the inner hole of the string. They are used for fishing the inner hole with holes such as tubing, drill pipe, casing milling pipe, packer, water distributor, etc. It is made of high-quality alloy steel and especially heats treated. It has the advantages of high strength, high toughness, and simple buckle making.

All of our fishing tools come with standard API threads. In our machine shop we can cut any thread or customizes a drilling tool solution for your needs. Our fishing tools range in size from3.5" OD - 24" OD

This drilling tool is an Over shot fishing tool. To construct this part it we manufacture in a similar fashion to the fishing spear. The over shot is precision CNC machined from hardened high alloy steel. And has a sharp internal thread profile. This fishing tool latches to the outside diameter of the broken down hole drilling tool. The hard sharpened threads are designed to latch and thread into the part.

The Fishing spear is a tapered down hole fishing tool that is designed to cut a thread into in inside bore of the rotary drilling tubular. Our manufacturing process specifies us to cut a sharp profile thread into case hardened 8620 high alloy steel. We do this in house with our CNC machine shop. This guarantees it will bit into the broken tubular.

A premium magnetic fishing tool that is also very inexpensive. It comes standard with a removable reaming bit which helps to stabilize it while down the hole. Our magnetic fishing tools pull over to 3501bs in testing, but we can design them to pull even more. Our fishing tools have open holes designed to allow the face of the tool to be flushed. This allows for good hole cleaning and helps insure random debris does not become magnetised and junk up the face of the tool. The magnetic fishing tool is designed to be used with none hibulars

Our hydraulic and mechanical jars are designed for releasing a stuck downhole tool by up-and-down impacts with static axial load (tension) and torque. Jars are included in drilling assemblies for sidetracking. We produce right and left hand fishing & drilling jarsas well as brand-new torsiconial jars purposed for releasing stuck tools by up-and-down torsional impacts.