side door overshot manufacturer

The side door overshot is run in on tubing or drill pipe. Line can be fed into the tool by removing the door on the side of the bowl. The door is put back into position after the line is in place. The feature eliminates the necessity of cutting the line or cable and the possibility of the lines fouling when there are two lines in the hole.

The Series 10 Sucker Rod Overshot is a small, rugged tool designed for engaging and retrieving sucker rods, couplings, and other items from inside tubing strings.

Series 20 Short Catch Sucker Rod Overshots are designed for conditions when sucker rods, couplings, and other portions of a fish are too short for retrieval with a standard overshot.

The Hydraulic Release Overshot was designed to aid in the recovery of a stuck fish in a horizontal drilling application where normal rotation for release is not obtainable.

The Series 150 Releasing and Circulating Overshot consists of three main external parts: a Top Sub, a Bowl, and a Guide. Internal catch and pack-off parts are determined by the diameter of the fish. Each assembly is designed for a maximum catch diameter.

A Series 160 Side Door Overshot is recommended when fishing for cable tools or conductor lines in cased holes. The side door overshot is run in on tubing or drill pipe.

The Superior Hydraulic Jar is a straight pull, up only, jarring tool that utilizes a special valve section to meter oil from one side of the piston to the other side. This allows for controlled jarring action during stuck fish recovery.

The Z Type Hydraulic Jar is used for light drilling, fishing, coring, reaming, testing, side tracking, and washover operations. This straight-pull jar combines the principles of mechanics and hydraulics in a simple to assemble, easy to operate design.

The Bi-Directional Coiled Tubing Jar is designed to hit upward and downward blows. It can be dressed to only hit up or down. These tools’ small outside diameters and shorter lengths make them ideal for milling, drilling, workover, remedial, or completion operations, especially in vertical, deviated, and ultradeep wellbores.

The Casing Roller repairs and restores dented, collapsed, or buckled tubing or casing of any size and weight to its original inside diameter and roundness.

Arctic Weather 85-Ton and 120-Ton Power Swivels are enclosed in insulated, 20-foot metal containers. The containers have adjustable louvers to allow operation in warmer temperatures. Two bi-fold doors on one side and double doors at the back permit complete access.

The arctic weather package also features deicer injector to prevent them from icing. Fuel and hydraulic tank heaters, and a hydraulic powered hose reel. One of the back doors features a hose window for routing hoses out of the container. To retain heat, the hose window is fitted with rubber flaps and a metal door on separate skid that is pulled in and out of the container by a dual drum hydraulic winch.

Selecting the proper door construction ensures that the opening will achieve to the owner’s performance and cost expectations. At Syntégra, our goal is to manufacture and equip the door with the features and options to meet or exceed these expectations without overshooting or undershooting the target.

Syntégra doors can be constructed of 18ga. or /16ga. skins with a variety of cores. Our standard material is leveled A40 Galvanneal Steel. Beyond exceptional corrosion resistance, this material provides additional strength, scratch resistance, and improved coating adhesion. As an option for corrosive environments or aesthetic preference, Syntégra can also fabricate doors using Stainless Steel (304 or 316).

Note: *Cased Hole Only. The Chart above is a guide-line only and should be used as a rule of thumb; the final decision is that of the Customer; 4” Pin-up drill pipe is an option inside 7” casing, discuss

with Fishing Tool Manager for guidance. Consult with a EOFR Fishing Manager when requirements do not fall within the guide line shown; Bottom Hole Assemblies (BHA) also should be considered

* All pull loads listed are based on a magnet engaging a flat surface covering the entire face of the magnet. “Pick up” capability will be reduced considerably

Used inside casings or as a junk mill, skirted mills use the skirt both as a guide and as protection of the surrounding environment from the milling proce... More Info

The Roto-Vert casing scraper is ideal to remove cement sheath, scale, perforating burrs, and other foreign substances from the inside wall... More Info

Series 10 Sucker Rod Overshot is a professional fishing tool, designed for engaging and retrieving sucker rods, couplings, and other tubular from inside tubing strings.

Series 10 Sucker Rod Overshot consists of a Top Sub, Bowl, Grapple, and a Guide. According to the size of the fish, there are two types of grapples available: Basket Grapple or Spiral Grapple. TIANHE Series 10 is a simply tool to use, no matter engaging or releasing operation, in fact just need to rotate the fishing string on right hand.

When overshot nears the top of the fish, slowly rotate to the right as the overshot is lowered over the fish. After the fish is engaged,allow right-hand torque to release from the fishing string. Then raise the fish by pulling upward on the fishing string.

Bump down or drop the weight of the fishing string against the Overshot to break the hold of the grapple within the Bowl. Elevate the fishing string while slowly rotating it to the right until the Overshot has cleared the fish.