14 eckel power tong made in china

An excellent choice where applications demand the combination of size range and high torque output, the Eckel Model 14 UHT handles pipe from 4 inches to 14 inches. This tong features our new patented CASE STIFFENERS that enhances overall torque output. Upgraded in design and performance over the Model 14 HS, this tong can deliver 70,000 ft-lb of torque. Also, available with Wedge Drive Tri-Grip® backup, which handles pipe from 4 inches to 15.5 inches.

Our patented CASE STIFFENER technology enhances overall torque to provide consistent torque output. Having a high full 360° rotational torque and speed-shifting capability ensures the tong can makeup special torque-turn connections that require continuous rotation. Also, the CASE STIFFENER technology reduces stress and wear on the rotary gear teeth.

The WD Tri-Grip® Backup is a high performance no compromise backup that is suitable for make-up and break-out of the most resilient connections. The WD Tri-Grip® Backup features a three head design that encompasses the tubular that applies an evenly distributed gripping force. The backup is capable of handling tubular from 1.050 in. to 15.5 in. (26.67 - 393.7 mm). A constant radial load is applied when a single wedge drive to actuate the front two pivot heads with a third stationary head providing a reactionary force to provide superior gripping performance. Wedge Drive Tri-Grip® Backup has exceptional gripping capabilities with Rig Dies when running drill pipe or optional Eckel Wrap-Around True-Grit® dies or Pyramid Fine Tooth dies for making up other types of tubular.

The 14 HS HT Tri-Grip® Tong is used for making up and break out casing and risers. Capable of handling tubular from 4 in. to 14 in. (101.6 - 355.6 mm) in diameter with a maximum torque of 135,000 ft-lbs (183035.4) of torque capacity. A two-speed Hydra-Shift® motor coupled with a two-speed gear train provides (4) torque levels and (4) RPM speeds. The tong features a three-head - Tri-Grip® biting system design, which like the Tri-Grip® Backup, encompasses the tubular to apply an evenly distributed gripping force. The additional head in the tong reduces the risk of radial deformation, die penetration, marking, and wear of the tubular by 1/3 at extreme torques. The tong performs exceptional gripping capabilities with either Eckel True-Grit® dies or Pyramid Fine Tooth dies.

A new, improved tong door - The Eckel patented Radial Door with Hook Latch provides significantly more strength to the tong body. The latching mechanism is a straightforward design that is hydraulically operated to open and securely close the door with ease. When closed a positive force is applied to the tong body, which provides higher rotational torque.

The WD Tri-Grip® Backup is a high performance no compromise backup that is suitable for make-up and break-out of the most resilient connections. The WD Tri-Grip® Backup features a three head design that encompasses the tubular that applies an evenly distributed gripping force. The backup can handle tubular from 4 in. to 15 in. (101.6 � 381.0 mm). A constant radial load is applied when a single wedge drive to actuate the front two pivot heads with a third stationary head providing a reactionary force to provide superior gripping performance. Wedge Drive Tri-Grip® Backup has exceptional gripping capabilities with Rig Dies when running drill pipe or optional Eckel Wrap-Around True-Grit® dies or Pyramid Fine Tooth dies for making up other types of tubular.

The 14-100 hydraulic power tong provides 100,000 ft-lb (135,600 N∙m) of torque capacity for running and pulling 7- to 14-in. casing. The tong has a unique gated rotary, a free-floating backup, and a hydraulic door interlock.

Our 14-50 high-torque casing tong provides 50,000 ft-lb (67,790 N∙m) of torque capacity for running and pulling 6 5/8- to 14-in. casing. The tong has a unique gated rotary, a free floating backup, and a hydraulic door interlock.

The 16-25 hydraulic casing tong provides 25,000 ft-lb (33,900 N∙m) of torque capacity for running and pulling 6 5/8- to 16-in. casing. The tong features a unique gated rotary and as many as seven contact points that create a positive grip without damaging the casing.

Rigged up without rig modifications, our 21-300 riser tong is the only tong capable of producing 300,000 ft-lb (406,746 N∙m) of continuous rotational torque in both makeup and breakout mode. The power it achieves in a compact size compares with a conventional 24-in. casing tong.

The 24-50 high-torque casing tong provides 50,000 ft-lb (67,790 N∙m) of torque capacity for running and pulling 10 3/4- to 24-in. casing. The tong features a unique gated rotary, a free-floating backup, and a hydraulic door interlock.

The 30-100 high-torque casing tong provides 100,000 ft-lb (135,600 N∙m) of torque capacity for running and pulling 16- to 30-in. casing. The tong features a unique gated rotary, a free-floating backup, and a hydraulic door interlock.

The 5.5-15 hydraulic tubing tong provides 15,000 ft-lb (20,340 N∙m) of torque capability for makeup and breakout of 1.66- to 5.5-in. tubing and premium or standard connections on corrosion‑resistant alloy tubulars. The tong features an ergonomic, lightweight design with a free-floating hydraulic backup.

The 7.6-30 hydraulic tubing tong provides 30,000 ft-lb (40,670 N∙m) of torque capability for makeup and breakout of 2 3/8- to 7 5/8-in. tubing and premium or standard connections on corrosion‑resistant alloy tubulars. The tong features an ergonomic, lightweight design with a free-floating hydraulic backup.

Our SpeedTork 8.0-70 tong provides torques up to 70,000 ft-lb (94,900 N∙m) and 360° rotation in makeup and breakout operations. It can torque drillpipe connections, drillstring components, drilling tools, packers, couplings, and valves.

Eckel 7 5/8 HDS-30 Tong When application demand a wide range of sizes, this tong handles pipe sizes 2 3/8 inches all the way to 7 5/8. Built around the 7 5/8 Standard, the 7 5/8 HD provides a thicker rotary gear for more added strength, an additional idler gear, a larger pinion gear, and stronger bearings for load bearing capacity and durability. 7 5/8 HDS CHROMEBOSS: the 7 5/8 HD comes standard with pivot style heads; however, upon ordering can be supplied with slide-heads which is designated as 7 5/8 HDS. the 7 5/8 HDS is part of our CHROMEBOSS series of tongs that is suitable for running corrosion-resistant alloy (CRA) tubulars. Two slide heads in the tong provide a consistent radial load on the tubular, reduced tubular deformation, and when combined with our pyramid fine tooth or True-GritTM wrap-around dies provides excellent gripping capabilities on corrosion-resistant alloy (CRA).

Eclel Established in 1958, Eckel is globally recognized as the leading manufacturer of hydraulic power tongs and hydraulic power units for the world"s oil and gas industries. We offer a full line of hydraulically operated drill pipe tongs, casing tongs, tubing tongs, hydraulic backups, hydraulic power units, and tong positioning equipment. Eckel delivers a comprehensive range of tongs from 2-1/16 through 36 in. for the most demanding onshore and offshore environments, offer a full range of high quality casing and tubing, drill pipe tongs for use in all types of oil and gas drilling, well completion and well servicing activities.

of hydraulic power tongs for the oil & gas industry. We of-Eckel Product Catalog Contents fer a full line of hydraulically operated tubing tongs, cas-

Tongs: ing tongs, drill pipe tongs, backups, power units and tong Remote Operated Tongs 4 TONGBOSS5 Model 21/16 Hydra-Shift 6 positioning equipment. Model 3500 DTT Hydra-Shift 6 Model 41/2 Hydra-Shift 7 Model 41/2 UHT-13 & UHT-20 7 Model 51/2 Standard Model 51/2 UHT / Hydra-Shift UHT 8 8 Every job is different. Eckel has a variety of Model 51/2 Hydra-Shift LS 9 tong models to meet your requirements. Model 51/2 Hydra-Shift VS 9 Model 75/8 Standard10 Eckel designs and man- Model 75/8 HD / HDS 10 Model 85/8 Hydra-Shift HT 11 ufactures a variety of Model 95/8 Hydra-Shift NB 11 tong models and sizes Model 95/8 Hydra-Shift HD 12 (21/16 to 36 in.) to handle Model 103/4 Standard 12 Model 103/4 Heavy Duty 13 almost any downhole Model 133/8 Standard 13 pipe string. Majority Model 135/8 HD-30 & HD-35 14 Model 14 Hydra-Shift 14 of our tongs come with Model 14 Ultra High Torque 15 the following features: Model 14 Hydra-Shift HT 15 latchless radial lock Model 17 Hydra-Shift 16 Model 20 Standard 16 door, wrap-around Model 20 Ultra High Torque 16 dies, and solid hanger. Model 21 Hydra-Shift 17 Model 22 Hydra-Shift 17 Optional equipment to Model 24 Ultra High Torque 18 Model 25 Hydra-Shift 18 improve your tubular Model 30 Hydra-Shift 19 running experience Model 36 Hydra-Shift 19 include: door interlock Model 36 Ultra High Torque 20 Model 63/4 Drill Pipe Tong 20 (automatically stops Model 870 Drill Pipe Tong 21 tong operation when Top Drive Casing Tong 21 the tong door is open), Eckel 13-3/8 Standard Tong with integral cam-type Accessories: door guards (a safety backup located offshore Poland in the Baltic Sea. Eckel Tri-Grip and Cam Backup 22 feature for removing Tong Dies 23 pinch points), lift cylinder, spring hanger, torque gauge, torque/ Tong Options 24 turn system, hydraulic integral backup, tong automation, tong Diesel and Electric Power Units 25 positioning and hydraulic power units. Contact Information: International Agents / Eckel Offices 27

www.eckel.com ENGINEERING THAT PERFORMS. 2Eckel Quality:Eckel"s ground-breaking designs, quality, and rugged du-rability have won us a world-wide reputation of a first-classproduct that insures years of trouble free service and areavailable in a varying models and size to handle any tubularstring, from rods to casing. Certifications - Eckel hydraulic Available Certifications power tongs can be manufac- tured to variety of certifications such as Det Norske Vertias DNV / ABS / CE (DNV), American Bureau of Shipping (ABS), and ConformitéEuropéenne (CE) directives. Certification provides therequired independent assurance that our equipment Eckel"s engineering department utilizes thearrives at site, designed, and manufactured to specifica- latest advancements in 2D & 3D design analysis programs.tion and are in compliance with relevant regulatory andsafety requirements.

Product Testing - Tongs and power units are performancerated to insure they meet our quality control standards.Equipment is inspected, greased and adjusted to ourhigh quality standards. Every tong is performance ratedon a one of a kind test stand that simulates make-up andbreak-out torque in a variety of different loads. Eckel sup-plies a test certificate upon request for tongs and powerunits that certify the equipment meets or exceeded ourhigh quality standards and performance ratings.

Manufacturing Facility: Essentially every part of our tongs and power units are designed and ISO 9001:2008 Reg No. QSR-942 manufactured by Eckel, using the Eckel CNC Machined Pivot Heads latest design tools and numericallycontrolled machines to exacting tolerances.Quality Management System - ISO 9001:2008 certified,Eckel"s registered manufacturing operation ensures theutmost quality at our facilities in Odessa, Texas which cov-ers Eckel Manufacturing, Co., Inc., Eckel International Inc.and Eckel Heat Treat Co.Eckel has a long standing commitment to: • To put customer"s needs first. • To produce world class oil field tools and equipment that is of the highest quality in the industry. • To provide a safe and efficient work environment for our people. • Continual quality improvement and total quality Torque Testing Eckel Tong

3Design and CNC Machining - Eckel utilizes the latest com-puter aided design programs, numerically controlled andautomated machining tools in our manufacturing process.Products are designed to provide the maximum safetywhile also maximizing productivity and reliability. Eckelwill custom design a product for whatever your applicationrequires.Eckel Heat Treating - Heat treating is one of the most im-portant steps in the production of a part, providing a com-bination of hardness, strength, and toughness. The partsare heated and quenched in a controlled carbon enrichedatmosphere to insure part uniformity to meet Eckel"s highquality standards.

Eckel Remote Operated Tongs provides a method of controllingthey hydraulic power tong from a remotely located console formake-up and break-out operations. The tong is based upon thestandard tong and backup configuration with the exception ofhydraulic cylinders installed on the unit for remote control of theoperational functions of the tong and backup. These functionsinclude the tong door, backing pin, mechanical gear shift. Powertong rotation, motor speed, and backup gripping are also config-ured for remote operation. The Remote Operated Tongs use a totalhydraulic system with no electrical or electronic devices included.

TONGBOSS® - Automated TongPositioning SystemThe Eckel TONGBOSS automated tong positioning sys-tem maneuvers any size of Eckel hydraulic power tongsprecisely around the tubular during running and pullingoperations. One operator controls the tong positioningand tong functions hydraulically from the rig floor. TheTONGBOSS is unique to all tong positioning systems onthe market today in that it requires no magnetism, bolting,welding, or rig floor tracks. In developing the TONGBOSS,Eckel set some simple design goals. These goals wereto improve safety, operational costs, cycle time, and touniversally install on any rig.

TONGBOSS™ Features Eliminates labor-intensive effort of “Manhandling” the tong. Reduces rig-floor accidents and additional personnel. When safety, time and money are at stake, it Single operator to control the TONGBOSS and tong. pays to have a TONGBOSS on your next job. No casing stands or scaffolds required. No magnetism, rig floor tracks, or welding required. Never swings freely and always under full operator control. Aligns tong consistently with the tubular member. Improved cycle time between operations. Aligns Tong Consistently with Tubular Retracts horizontally to a parked location between operations. Reduces Rig-Floor Accidents Operate all functions manually or with optional wireless controls. Optional remote monitoring with wireless video cameras. Tong Never Swings Freely Designed for use with or without integral hydraulic backup. TONGBOSS models available for a range of tong sizes or explicitly to one tong size. Applicable for land rigs, rocking drill ships, floaters, tension leg platforms and snubbing units.

Model 21/16 Hydra-Shift® Model 21/16 Hydra-Shift Tong Specifications2 HS SH TGB CT FT GF TCS RLD

Tong Capacity 1.050 - 21/16 in. (26.7 - 52.4 mm) Backup Capacity 1.050 - 2.460 in. (26.7 - 62.5 mm)3 HS DTT SH CB CT FT GF TCS RLD The lighter, smaller Dimensions: Tong Only 16 x 41.5 in. (406.4 x 1054.2 mm)4 21/16 SHHydra-Shift TGB CT ® FTTong. GF TCS RLD Tong and Backup 23 x 41.5 in. (584.2 x 1054.2 mm) Less is definitely more. Weight: [1] Tong Only 500 lb. (226.8 kg) UHT SH TGB CT FT GF TCS5 RLD The Oil & Gas Industry has needed a specialized power tong with Tong and Backup 800 lb. (362.9 kg) an integral hydraulic backup. This tong is sized enough with the Maximum Torque HSVS SH TGB CT FT GF TCS @ 1000 PSI (67 bar) 2,500 ft-lb (3389.5 Nm)6 right amount of controllable torque RLD output. It is designed so as to @ 1200 PSI (83 bar) 3,200 ft-lb (4338.6 Nm) properly grip small tubulars such as small macaroni type strings Maximum RPM @ 40 GPM (152 LPM) SH TGB CT FT GF TCS7 of tubing. RLD High: 80 rpm Low: 37 rpm Load Cell Type Compression or Tension8 PH TGB CT FT GF TCS RLD Handle Length Tong Only 15.6 in. (396.2 mm) FT Tong and Backup 19 in. (482.6 mm) PH CB CT TCS RLD9 Certifications DNV and ABS Optional

Model 3500 Hydra-Shift® DTT UHT HS SH TGB CT FT GF TCS RLD Model 3500 Hydra-Shift DTT17 Tong Specifications3 HS DTT SH CB CT FT GF TCS RLD

Capacity 1.050 - 31/2 in. (26.7 - 88.9 mm) HSVS PH TGB CT FT TCS RLD18 TGB FT GF Dimensions 13.5 x 32 in (342.9 x 812.8 mm)4 SH CT TCS RLD The Eckel 3500 Hydra-Shift DTT (Dual Tubing Tong) provides fast, Weight [1] 800 lb. (362.9 kg) easy HS running DTT SH onTGBdualCTstrings FT ofGF31/2 inch TCS or RLDsmaller tubing. It grabs19 UHT SH TGB CT FT GF TCS Maximum Torque @ 2,500 psi (172 bar)5 RLD from the side, or head-on. Torque it up! This tong is Eckel tough. Low 7,000 ft-lb (9491 Nm) Speed UHT PH shifting TGB are no CT FT problem, TCS RLDthanks to a patented Hydra-Shift High 3,500 ft-lb (4745 Nm)20 HSVS SH TGB CT FT GF TCS RLD6 concept that eliminates clutching. Maximum RPM @ 40 GPM (152 LPM) PH TGB CT FT TCS RLD High: 65 rpm Low: 30 rpm217 SH TGB CT FT GF TCS RLD Optional RPM Control High: 5 rpm Low: 2.5 rpm PH TGB CT FT GF TCS RLD8 Handle Length 24 in. (609.6 mm) Certifications DNV and ABS Optional PH CB CT FT TCS9 RLD Hydraulic Cam Backup Specifications Capacity 1.050 - 41/2 in. (26.7 - 114.3 mm) PH CB CT FT TCS RLD10 Dimensions [2] 21 x 34.5 in. (533.4 x 876.3 mm) Weight [1] [2] 1,450 lb. (657.7 kg) UHT PH CB CT FT TCS RLD11 Load Cell Type Compression or Tension Handle Length [2] 24.5 in. (622.3 mm) HSVS PH CB CT FT TCS RLD12 [1] Weight Approximate, [2] Tong and Backup HS PH CT FT TCS RLD13

Model 41/2 Hydra-Shift® Model 41/2 Hydra-Shift Tong Specifications2 HS SH TGB CT FT GF TCS RLD

Capacity 1.050 - 41/2 in. ­(26.7 - 114.3 mm) Dimensions 21.5 x 45 in (546.1 x 1143 mm)3 HS DTT SH CB CT FT GF TCS Packed with all the features you"ve come to expect from Eckel: RLD Weight [1] 800 lb. (362.9 kg) patented cam biting system, quick-change sliding heads, self- Maximum Torque @ 2,000 psi (138 bar) TGB FT GF4 SH CT TCS RLD aligning open throat, and auto closing door. The unit is available High 1,800 ft-lb (2440 Nm) Low 6,900 ft-lb (9355 Nm) with front or side controls, standard chain bridle suspension, or with5 UHT SH TGB CT FT GF TCS RLD Maximum Torque @ 2,500 psi (172 bar) its own built-in suspension arm. Options include manual backup High 2,500 ft-lb (3390 Nm) or Tri-Grip® hydraulic backups. Low 7,500 ft-lb (10169 Nm) HSVS SH TGB CT FT GF TCS RLD6 Maximum RPM @ 40 GPM (152 LPM) High 105 rpm SH TGB CT FT GF TCS Low 30 rpm7 RLD Handle Length 23.5 in. (596.9 mm) PH TGB CT FT GF TCS RLD Certifications DNV and ABS Optional8 Tri-Grip® Backup Specifications 41/2 Hydra-Shift® Capacity 1.050 - 59/16 in. (26.7 - 141.3 mm) PH CB CT FT TCS RLD9 Dimensions [2] 28 x 45 in. (711.2 x 1143 mm)

PH CB CT FT TCS RLD Weight [1] [2] 1,550 lb. (703.1 kg)10 Load Cell Type Compression or Tension UHT PH CB CT FT TCS RLD Handle Length [2] 25 in. (635.0 mm)11 [1] Weight Approximate, [2] Tong and Backup HSVS PH CB CT FT TCS RLD12

14 DPT SH CT FT TCS RLD Model 41/2 UHT-13 and UHT-202 HS SH TGB CT FT GF TCS RLD UHT-13 and UHT-20 Tong Specifications EPU15 4 /2 Hydra-Shift with 1 ® Capacity 1.050 - 41/2 in. (26.7 - 114.3 mm) Tri-Grip® Hydraulic Backup Rod Size 5 /8 - 11/8 in. (15.9 - 28.6 mm)3 HS DTT SH CB CT FT GF TCS RLD

17 Model 4 /2 UHT-13 and UHT-20 UHT HS SH 1 TGB CT FT GF TCS RLD UHT-20 Weight [1] 1000 lb. (453.6 kg) UHT SH TGB CT FT GF TCS UHT-13 Maximum Torque5 HSVS PH TGB CT FT TCS RLD RLD @ 2,000 PSI (138 bar)18 High: 2,000 ft-lb (2712 Nm) HSVS SH TGB CT FT GF TCS RLD Low: 7,000 ft-lb (9491 Nm)6 Light HS weight DTT SH and TGB rugged CT FT theGF UHT-13 TCS configuration provides RLD @ 2,500 psi (172 bar)19 8,500 ft-lb of torque. A notable feature quick-change sliding head High 2,500 ft-lb (3390 Nm) SH TGB CT FT GF TCS Low 8,500 ft-lb (11524 Nm)7 biting system that compensates for RLD worn or under gauge pipe. UHT PH TGB CT FT TCS RLD UHT-13 Maximum RPM @20 Options include manual backup or Tri-Grip® hydraulic backups. PH TGB CT FT GF TCS RLD 65 GPM (246 LPM) High: 191 rpm, Low: 49 rpm8 Slide heads PH TGB withCTrig dies FT are TCS available RLD on the UHT-20 for handling 50 GPM (189 LPM) High: 147 rpm, Low: 38 rpm21 drill pipe tool joints. 40 GPM (151 LPM) High: 117 rpm, Low: 30 rpm PH CB CT FT TCS RLD9 UHT-20 Maximum Torque @ 1,470 PSI (101.4 bar) PH CB CT FT TCS RLD High 2,300 ft-lb (3118 Nm)10 Low 8,000 ft-lb (10847 Nm) @ 2,000 PSI (138 bar) UHT PH CB CT FT TCS RLD High 2,600 ft-lb (3525 Nm)11 Low 10,000 ft-lb (13558 Nm) @ 2,500 PSI (172 bar) HSVS PH CB CT FT TCS RLD High 3,000 ft-lb (4067 Nm)12 Low 12,000 ft-lb (16270 Nm) 4 /2 UHT 1 UHT-20 Maximum RPM @ HS PH CT FT TCS RLD13 65 GPM (246 LPM) High: 124 rpm, Low: 32 rpm 50 GPM (189 LPM) High: 95 rpm, Low: 25 rpm DPT SH CT FT TCS RLD 40 GPM (151 LPM) High: 76 rpm, Low: 20 rpm14 Handle Length 24 in. (609.6 mm) EPU Certifications DNV and ABS Optional15 Tri-Grip® Backup Specifications DPU Capacity 1.050 - 59/16 in. (26.7 - 141.3 mm)16 41/2 UHT with Dimensions [2] 281/2 x 451/2 in. (723.9 x 1155.7 mm) Tri-Grip® Hydraulic Backup Weight [1] [2] 1,800 lb. (816.5 kg) UHT HS SH TGB CT FT GF TCS RLD17 Load Cell Type Compression or Tension Handle Length [2] 25 in. (635.05 mm) HSVS PH TGB CT FT TCS RLD18 [1] Weight Approximate, [2] Tong and Backup HS DTT SH TGB CT FT GF TCS RLD 719 SH TGB CT FT GF TCS RLD

Model 5  /2 Standard 1 Model 51/2 Standard PH TGB CT FT GF TCS RLD Tong Specifications1 DPT SH BDB CT FT TCS RLD Capacity21/16 - 51/2 in. (52.4 - 139.7 mm) PH CB CT FT TCS RLD Dimensions 25 x 54 in. (635 x 1371.6 mm)2 The HS Model SH 51/2 CTis theFT firstGFopen-throat TGB TCS RLD design in its size range to Weight [1] 980 lb. (444.5 kg) generate 12,000 ft-lb of available torque. Versatility is the name Maximum Torque @ 2,500 psi (172 bar) PH CB CT FT TCS RLD3 of HS theDTT game SH hereCB as CTthis FTtongGFworks TCS well RLD whether powered by a High 2,800 ft-lb (3796 Nm) Low 12,000 ft-lb (16270 Nm) workover rig or a portable casing tong power unit. An optional Tri-UHT PH CB CT FT TCS RLD Maximum RPM @ 65 GPM (246 LPM)4 Grip®SHhydraulic TGB CT backup FT isGFavailable. TCS RLD High: 156 rpm Low: 31 rpm HSVS PH CB CT FT TCS RLD Handle Length 36 in. (914.4 mm) UHT SH TGB CT FT GF TCS5 RLD Certifications .DNV and ABS Optional Tri-Grip® Hydraulic Backup HS PH CT FT TCS RLD6 HSVS SH TGB CT FT GF TCS RLD Capacity21/16 - 59/16 in. (52.4 - 141.3 mm) Dimensions [2] 29.5 x 54 in. (749.3 x 1371.6 mm) DPT SH CT FT TCS RLD SH TGB CT FT GF TCS Weight [1] [2] 1,900 lb. (861.8 kg)7 RLD

51/2 Standard Load Cell Type Compression or Tension EPU PH TGB CT FT GF TCS RLD Handle Length [2] 28.5 in. (723.9 mm)8 DPU [1] Weight Approximate, [2] Tong and Backup PH CB CT FT TCS RLD9UHT HS SH TGB CT FT GF TCS RLD PH CB CT FT TCS RLD10 HSVS PH TGB CT FT TCS RLD UHT PH CB CT FT TCS RLD11 HS DTT SH TGB CT FT GF TCS RLD HSVS PH CB CT FT TCS RLD12UHT PH TGB CT FT TCS RLD HS PH CT FT TCS RLD13 PH TGB CT FT TCS RLD DPT SH CT FT TCS 51/2 Standard RLD with14 Tri-Grip® Hydraulic Backup

EPU15 DPU16 Model 5 1/2 UHT / UHT Hydra-Shift® Model 51/2 UHT UHT HS SH TGB CT FT GF TCS RLD17 Tong Specifications Capacity21/16 - 51/2 in. (52.4 - 139.7 mm) HSVS PH TGB CT FT TCS RLD Dimensions 32 x 54 in. (812.8 x 1371.6 mm)18 Extremely popular among the most successful of pipe handlers, Weight [1] 1,800 lb. (816.5 kg) the Model 51/2 UHT combines high TCS torque (up to 30,000 ft-lb) with HS DTT SH TGB CT FT GF RLD Handle Length 32.5 in. (825.5 mm)19 a wide capacity range. Ideal for handling tubing, casing and small Certifications .DNV and ABS Optional drill pipe. An optional Tri-Grip® hydraulic backup is available. Slide 5-1/2 UHT UHT PH TGB CT FT TCS RLD20 heads with rig dies are available for handling drill pipe tool joints. Maximum Torque @ 2,500 psi (172 bar) High 5,400 ft-lb (7321 Nm) PH TGB CT FT TCS RLD Low 25,000 ft-lb (33895 Nm)21 Maximum RPM @ 65 GPM (246 LPM) High: 72 rpm Low: 14 rpm 51/2 UHT HS 5-1/2 UHT Hydra-Shift® Maximum Torque @ 2,500 psi (172 bar) High-High 3,500 ft-lb (4745 Nm) High-Low 6,800 ft-lb (9220 Nm) Low-High 15,000 ft-lb (20337 Nm) Low-Low 30,000 ft-lb (40675 Nm) Maximum RPM @ 65 GPM (246 LPM) High-High: 125 High-Low: 60 Low-High: 25 Low-Low: 12 Tri-Grip® Hydraulic Backup Capacity 21/16 - 6.050 in. (52.4 - 153.7 mm) 51/2 UHT with Dimensions [2] 38.5 x 56 in. (978 x 1422.4 mm) Tri-Grip® Hydraulic Backup Weight [1] [2] 2,800 lb. (1270 kg) Load Cell Type Compression or Tension Handle Length [2] 32.5 in. (825.5 mm)

5 Model 5 1/2 Hydra-Shift® UHT SH TGB CT FT GF TCS RLD Model 51/2 Hydra-Shift® LS Tong Specifications LS - Low Speed / VS - Variable Speed Capacity21/16 - 51/2 in. (52.4 - 139.7 mm) HSVS SH TGB CT FT GF TCS RLD6 Dimensions 24 x 49 in. (609.6 x 1244.6 mm) Weight [1] 1,340 lb. (607.8 kg) SH TGB CT FT GF TCS7 RLD Compact Size…Big Torque…if this is what you are looking for in a Maximum Torque @ 2,000 psi (138 bar) High 7,000 ft-lb (9491 Nm) power tong,TGB look no further. FT Our 51/2 Hydra-Shift is sized smaller in Low 15,000 ft-lb (20337 Nm) PH CT GF TCS RLD8 width than our 51/2 Standard model. Like all of our newly developed Maximum Torque @ 2,500 psi (172 bar) tongs, the CB51/2 incorporates the Hydra-Shift technology, allowing High 9,000 ft-lb (12202 Nm)9 PH CT FT TCS RLD Low 17,000 ft-lb (23049 Nm) the operator to shift from high speed to low speed without having Maximum RPM @ 40 GPM (151.4 LPM) to manually shift the tong. You will see many years of trouble free High: 45 rpm Low: 20 rpm PH CB CT FT TCS RLD10 operation, not to mention the smoother hydraulic shifting. Handle Length 28.5 in. (723.9 mm) The UHT 5PH 1 /2 Hydra-Shift CB CT LS FT with TCSa two-speed RLD motor and a single-speed Certifications DNV and ABS Optional11 Tri-Grip® Backup Specifications gear train is the original 51/2 Hydra-Shift which has gained wide ac- Capacity21/16 - 6.050 in. (52.4 - 153.7 mm)12 ceptance HSVS PH in CB theCT industry. FT The TCS 5RLD 1 /2 Hydra-Shift VS with a two-speed Dimensions [2] 34 x 49 in. (863.6 x 1244.6 mm) motor and a two-speed gear train, this offers the operator a more Weight [1]13 flexible HS PH choice CT of torque/rpm’s FT TCS RLD to work with during make-up or 5-1/2 HS VS 2,300 lb. (1043.3 kg) break-out. The 5-1/2 HS VS is part of our CHROMEBOSS® series 5-1/2 HS LS 2,170 lb. (984.3 kg) of DPTtongs SH thatCT is suitable FT TCS for running corrosion-resistant alloy (CRA) RLD Load Cell Type Compression or Tension14 Handle Length [2] 28.5 in. (723.9 mm) tubulars and drill pipe tool joints (slide heads with rig dies). EPU [1] Weight Approximate, [2] Tong and Backup15

16 DPU Model 51/2 Hydra-Shift® VS Tong Specifications UHT HS 51/SH TGB 2 HYDRA-SHIFT CT ® LS withFT GF TCS RLD17 Capacity21/16 - 51/2 in. (52.4 - 139.7 mm) Tri-Grip® Hydraulic Backup Dimensions 24 x 47 in. (609.6 x 1193.8 mm) HSVS PH TGB CT FT TCS RLD Weight [1] 1,370 lb. (621.4 kg)18 Maximum Torque @ 2,000 psi (138 bar) HS DTT SH TGB CT FT GF TCS RLD High-High 1,900 ft-lb (2576 Nm)19 High-Low 3,700 ft-lb (5017 Nm) Low-High 9,200 ft-lb (12474 Nm) UHT PH TGB CT FT TCS RLD Low-Low 17,600 ft-lb (23862 Nm)20 Maximum Torque @ 2,500 psi (172 bar) High-High 2,400 ft-lb (3254 Nm) PH TGB CT FT TCS RLD High-Low 4,600 ft-lb (6237 Nm)21 Low-High 11,000 ft-lb (14914 Nm) Low-Low  22,000 ft-lb (29828 Nm) Maximum RPM @ 65 GPM (246 LPM) High-High:126rpm High-Low: 78 rpm Low-High: 25 rpm Low-Low: 15 rpm Handle Length 28.5 in. (723.9 mm) Certifications DNV and ABS Optional Tri-Grip® Backup Specifications Capacity21/16 - 6.050 in. (52.4 - 153.7 mm) Dimensions [2] 34 x 49 in. (863.6 x 1244.6 mm) Weight [1] 5-1/2 HS VS 2,300 lb. (1043.3 kg) 5-1/2 HS LS 2,170 lb. (984.3 kg) 51/2 HYDRA-SHIFT® VS with Load Cell Type Compression or Tension Tri-Grip® Hydraulic Backup Handle Length [2] 28.5 in. (723.9 mm) [1] Weight Approximate, [2] Tong and Backup

Model 7  /8 Standard5 Model 75/8 Standard PH TGB CT FT GF TCS RLD Tong Specifications Capacity23/8 - 75/8 in. (60.3 - 193.7 mm) PH CB CT FT TCS RLD Dimensions 30 x 60 in. (762.0 x 1524.0 mm) The 75/8 Standard tong handles pipe sizes 23/8 inches all the way Weight [1] 1,100 lb. (499.0 kg) to 75/8 inch. Its rugged design is based upon knowledge gained Maximum Torque @ 2,500 psi (172 bar) PH CB CT FT TCS RLD from the 51/2 model...combining an extremely compact, high torque High 3,000 ft-lb (4067 Nm) Low 15,000 ft-lb (20337 Nm) concept with added versatility. An optional Tri-Grip® hydraulicUHT PH CB CT FT TCS RLD Maximum RPM @ 65 GPM (246 LPM) backup is available. Available torque: 15,000 ft-lb High: 132 rpm Low: 26 rpmHSVS PH CB CT FT TCS RLD Handle Length 36 in. (914 mm) Certifications DNV and ABS Optional Tri-Grip® Backup SpecificationsHS PH CT FT TCS RLD Capacity23/8 - 85/8 in. (60.3 - 219.1 mm) Dimensions [2] 30 x 60 in. (762.0 x 1524.0 mm)DPT SH CT FT TCS RLD Weight [1] [2] 1,900 lb. (861.8 kg) Load Cell Type Compression or TensionEPU 1 DPT SH BDB CT FT TCS RLD Handle Length [2] 28 in. (711.2 mm) [1] Weight Approximate, [2] Tong and BackupDPU 2 HS SH TGB CT FT GF TCS RLD

Tong SpecificationsHS SH TGB CT FT TGB GF FTTCS RLD GF Capacity23/8 - 75/8 in. (60.3 - 193.7 mm)HSVS 4 PH TGB SH CT FT CT TCS RLD TCS RLD Dimensions 291/2 x 561/2 in. (749.3 x 1435.1 mm)HS DTT SH UHT CB CT TGB FT CT FTGF TCS GF RLD TCS Weight [1] 1,500 lb. (680.4 kg) SHHS 5 DTT SH TGB CT FT GF TCS RLD RLD Operating Pressure 2,500 psi (172 bar) Maximum Torque - HD-20 / HDS-20 SH TGB HSVS CT SH FT TGB GF CT FTTCS GF RLD TCS RLDUHT 6 PH TGB CT FT TCS RLD High 3,400 ft-lb (4610 Nm) Low 20,000 ft-lb (27116 nm)UHT SH TGB CT SH FT TGB GF CT FT TCS GF RLD TCS Maximum Torque - HD-25 / HDS-20 7 RLD High 4,250 ft-lb (5762 Nm) Model 7 5/8 HD / HDS PH TGB CT FT TCS RLD Low 25,000 ft-lb (33895 nm)HSVS SH TGB CT PH FT TGB GF CT FTTCS GF RLD TCS RLD Maximum Torque - HD-30 / HDS-20 8 High 5,100 ft-lb (6915 Nm) Low 30,000 ft-lb (40674 nm) SH TGB CT PH FT CB GF CT FTTCS TCS RLD RLD 9 When application demand a wide range of sizes, this tong handles Maximum RPM @ 65 GPM (246 LPM) HD-20 / HDS-20 High: 93 rpm, Low: .15 rpm pipe sizes 2-3/8 inches all the way to 7-5/8. Built around the 7-5/8 HD-25 / HDS-25 High: 78 rpm, Low: 13 rpm PH TGB CT PH FT CB GF CT FTTCS RLD TCS RLD 10Standard, the 7-5/8 Heavy Duty provides a thicker rotary gear for HD-30 / HDS-30 High: 70 rpm, Low: 12 rpm more added strength, an additional idler gear, a larger pinion gear, Handle Length 36.5 in. (927.1 mm) PH CB UHT CT PH FT CB TCS CT FTRLD TCS RLD 11and stronger bearings for load bearing capacity and durability. Certifications DNV and ABS Optional Tri-Grip® Backup Specifications 7-5/8 PH HDSPHCTCHROMEBOSS CB HSVS FT CB TCS CT RLD - TCS FT The RLD 7-5/8 HD comes standard with Capacity23/8 - 95/8 in. (60.5 - 244.5 mm) 12 pivot style heads; however, upon ordering can be supplied with Dimensions [2] 381/2 x 571/2 in. (977.9 x 1460.5 mm)UHT slide-heads PH CB HS CT which PH FT CT is designated TCS FT RLD TCS RLD as 7-5/8 HDS. The 7-5/8 HDS is Weight [1] [2] 2,850 lb. (1293 kg) 13 Load Cell Type Compression or Tension part of our CHROMEBOSS® series of tongs that is suitable forHSVS running PH CB corrosion-resistant DPT CT SH FT CT TCS FT RLD alloy TCS RLD (CRA) tubulars. Two slide heads Handle Length [1] 35 in. (889.0 mm) 14 in the tong provide a consistent radial load on the tubular, reduced [1] Weight Approximate, [2] Tong and BackupHS tubular PH CT deformation, EPU FT TCS and when combined with our pyramid fine RLD 15 tooth or True-GritTM wrap-around dies provides excellent grippingDPT capabilities SH CT DPU FT on TCS corrosion-resistant RLD alloy (CRA). 16EPU UHT HS SH TGB CT FT GF TCS RLD 17DPU HSVS PH TGB CT FT TCS RLD 18UHT HS SH HS TGB DTT CT SH FT TGB GF CT TCS FT RLD GF TCS RLD 19HSVS PH TGB UHT CT PH FT TGB TCS CT FTRLD TCS RLD 20HS DTT SH TGB CT FT GF TCS RLD PH TGB CT FT TCS RLD 21UHT PH TGB CT FT TCS RLD

3 Model 8 5/8 Hydra-Shift® HT HS DTT SH CB CT FT GF TCS RLD Model 85/8 Hydra-Shift® HT HSVS HT SH CB CT FT TCS RLD Tong Specifications TGB FT GF Capacity23/8 - 85/8 in. (60.3 - 219.1 mm)4 SH CT TCS RLD

HSVS HT PH CB CT FT TCS RLD Dimensions 30 x 56 in. (762.0 x 1397.0 mm) Special UHT SH applications TGB CT FT andGFtoughTCS requirements demanded that we Weight [1] 2,110 lb. (957.1 kg)5 RLD respond with a new tong designed and built with today"s pipe Maximum Torque @ 2,500 psi (172 bar) handling HSVS SH challenges TGB CT in mind. FT GF Utilizing TCS a two speed mechanical shift High-High 5,000 ft-lb (6779 Nm)6 RLD High-Low 10,000 ft-lb (13558 Nm) transmission in conjunction with the two speed Hydra-Shift motor, Low-High 20,000 ft-lb (27116 Nm) the tong SH has TGB a flexible CT FT