automated power tong pricelist

The 9-5/8” power tong with Rineer GA15-13 two-speed hydraulic motor, motor valve, lift cylinder valve, rigid sling, FARR® hydraulic backup, configured for compression load cell.

Power tongs are an essential tool in the drilling industry and are used to make up, break out, apply torque and to grip the tubular components. We are distributors for both Starr Power Tongs and McCoy Global hydraulic power tongs in multiple sizes and torque ranges from high torque to low torque that can be used to run both casing, drill pipe and tubing. When determining which power tong is best for your project, you will want to select the power tong that best fits your tubular size ranges and torque required.

All of our power tongs are available with either the McCoy\\\\\\\\\\\\\\\"s patented WinCatt data acquisition software recently updated to the MTT systems or AllTorque\\\\\\\\\\\\\\\"s computer monitoring system for all the torque and turn control system needed in today\\\\\\\\\\\\\\\"s market for the making of tubular connections. Discover our wide selection of McCoy and Starr casing tongs, tubing tongs and power tongs for sale below!

The 14-100 hydraulic power tong provides 100,000 ft-lb (135,600 N∙m) of torque capacity for running and pulling 7- to 14-in. casing. The tong has a unique gated rotary, a free-floating backup, and a hydraulic door interlock.

Our 14-50 high-torque casing tong provides 50,000 ft-lb (67,790 N∙m) of torque capacity for running and pulling 6 5/8- to 14-in. casing. The tong has a unique gated rotary, a free floating backup, and a hydraulic door interlock.

The 16-25 hydraulic casing tong provides 25,000 ft-lb (33,900 N∙m) of torque capacity for running and pulling 6 5/8- to 16-in. casing. The tong features a unique gated rotary and as many as seven contact points that create a positive grip without damaging the casing.

Rigged up without rig modifications, our 21-300 riser tong is the only tong capable of producing 300,000 ft-lb (406,746 N∙m) of continuous rotational torque in both makeup and breakout mode. The power it achieves in a compact size compares with a conventional 24-in. casing tong.

The 24-50 high-torque casing tong provides 50,000 ft-lb (67,790 N∙m) of torque capacity for running and pulling 10 3/4- to 24-in. casing. The tong features a unique gated rotary, a free-floating backup, and a hydraulic door interlock.

The 30-100 high-torque casing tong provides 100,000 ft-lb (135,600 N∙m) of torque capacity for running and pulling 16- to 30-in. casing. The tong features a unique gated rotary, a free-floating backup, and a hydraulic door interlock.

The 5.5-15 hydraulic tubing tong provides 15,000 ft-lb (20,340 N∙m) of torque capability for makeup and breakout of 1.66- to 5.5-in. tubing and premium or standard connections on corrosion‑resistant alloy tubulars. The tong features an ergonomic, lightweight design with a free-floating hydraulic backup.

The 7.6-30 hydraulic tubing tong provides 30,000 ft-lb (40,670 N∙m) of torque capability for makeup and breakout of 2 3/8- to 7 5/8-in. tubing and premium or standard connections on corrosion‑resistant alloy tubulars. The tong features an ergonomic, lightweight design with a free-floating hydraulic backup.

Our SpeedTork 8.0-70 tong provides torques up to 70,000 ft-lb (94,900 N∙m) and 360° rotation in makeup and breakout operations. It can torque drillpipe connections, drillstring components, drilling tools, packers, couplings, and valves.

Chinese PV manufacturer TW Solar (Tongwei Co., Ltd.) TW Solar spoke to pv magazine at the recent World Future Energy Summit (WFES) in Abu Dhabi about its strategy for the Middle East and North Africa (MENA) region and other global markets.

Scotland’s Gravitricity is developing gravity-based storage facilities in former mine shafts to stabilize electricity networks at 50 Hz, by responding to full power demand in less than a second. CEO Charlie Blair speaks to pv magazine about the ...

IBC SOLAR Energy, IBC SOLAR AG"s international project division, has concluded the realisation of two megawatt solar parks in Hungary with nominal power outputs of 51 and 45 megawatt peak (MWp). The green electricity generated corresponds to the supply of 35,000 3-person households. IBC SOLAR

The clean power numbers published annually by the International Renewable Energy Agency provide a snapshot of the global solar market and, this year, a lot of figures were unchanged from the previous dataset, especially in the off-grid segment.

Tongwei has revealed plans to set up a new polysilicon facility with a production capacity of 120,000 metric tons (MT) in Leshan, in China’s Sichuan province.

While the first half of 2022 was one of the busiest periods on record for new wind projects in Australia, with more than 2 GW breaking ground, solar got off to a much slower start with construction on 635 MW of new PV projects getting underway. Rystad Energy’s David Dixon attributes this slowdown to high cost and supply chain challenges and a lack of available power purchase agreements.

The Bern University of Applied Sciences in Switzerland has published the initial results of a survey on the durability and performance of residential PV inverters and power optimizers over a 15-year period. They found that more than 65% of the inverters did not present yield-relevant faults by their 15th year of operation.

SJVN, a state-owned hydropower producer in India, has signed an agreement with the state government of Uttar Pradesh to set up a 700 MW solar plant in the Indian city of Kanpur.

Solyx Energy has developed a device to maximize solar self-consumption in residential homes. The sensor measures how much solar power can be fed back into the grid at different times, while a controller redirects that excess energy into an electric water heater.

Australian modular solar manufacturer 5B’s rapidly deployable Maverick technology is set for installation at a 95 MW hybrid power plant in Western Australia featuring solar, wind, and battery energy storage.

Plans for Europe’s largest-ever PV cell and module factory are taking shape, with equipment orders placed and a projected start date in mid-2024. Enel Green Power has received €118 million ($116.36 million) in funding from the EU Innovation Fund to support the project, out of a total €600 million investment. The EU is hoping it will catalyze further investment in similar projects, and start a high-tech comeback for European solar manufacturing.

Norsun, which operates a hydroelectric-powered factory in Norway, has agreed to sell wafers to Meyer Burger, which plans to expand its annual solar cell production capacity to 3 GW by 2024.

Work smarter with real-time data acquisition and reap the benefits of having pertinent, accurate details of all your joints and work string with increased safety, accuracy and knowledge by adding any of Highwood’s tong packages. Complete with optional full data logging you can remotely and safely control your wrench while recording invaluable information from your string line. We can provide a fully automated tong brand-new or incorporate it into your existing equipment.

Have remote operation and full data logging to bring maximum control to your power tong. Highwood’s Automated Tong Package works on any tong so that you don"t need to change your current equipment. Bring safety and data acquisition to your rig fleet.

Highwood"s closed face back-up tong provides safety and efficiency to any closed faced tong on the market. Operate without flipping or changing dies, up to 5-1/2” pipe. Add optional control to a closed face tong to keep operators out of hazardous work zones. Add safety and control without replacing your tong.

Phala Network is a privacy-preserving cloud computing service, which offers computing power comparable to existing cloud services and protects the privacy of managed programs. Based on TEE-Blockchain Hybrid Architecture, developers can deploy confidential smart contracts running inside the TEE Enclaves in the CPU.

PHA is the native utility token that is used for:Trusted Computing Resources: Purchase trusted computing resources in the network and the data exchanges (e.g. trusted computing power, on-chain computing and storage resources, and off-chain storage) using PHA tokens.

Marvin Tong: Senior Product Manager with 3 years experience. Worked in Tencent and Didi which are both the biggest Internet companies in China. Good at Product Design and Business Development. 【Linkedn】

Phala Network tackles the issue of trust in the computation cloud.This blockchain is a trustless computation platform that enables massive cloud processing without sacrificing data confidentiality. Built around TEE-based privacy technology already embedded into modern processors, Phala Network"s distributed computing cloud is versatile and confidential. By separating the consensus mechanism from computation, Phala ensures processing power is highly scalable. Together, this creates the infrastructure for a powerful, secure, and scalable trustless computing cloud.

As a member parachain of the Polkadot cross-chain ecosystem, Phala will be able to provide computing power to other blockchain applications while protecting the data layer, enabling possibilities like privacy-protected DeFi trading positions and transaction history, co-computing DID confidential data, developing light-node cross-chain bridges, and more.