casing power tong pricelist

Eckel 7 5/8 HDS-30 Tong When application demand a wide range of sizes, this tong handles pipe sizes 2 3/8 inches all the way to 7 5/8. Built around the 7 5/8 Standard, the 7 5/8 HD provides a thicker rotary gear for more added strength, an additional idler gear, a larger pinion gear, and stronger bearings for load bearing capacity and durability. 7 5/8 HDS CHROMEBOSS: the 7 5/8 HD comes standard with pivot style heads; however, upon ordering can be supplied with slide-heads which is designated as 7 5/8 HDS. the 7 5/8 HDS is part of our CHROMEBOSS series of tongs that is suitable for running corrosion-resistant alloy (CRA) tubulars. Two slide heads in the tong provide a consistent radial load on the tubular, reduced tubular deformation, and when combined with our pyramid fine tooth or True-GritTM wrap-around dies provides excellent gripping capabilities on corrosion-resistant alloy (CRA).

Eclel Established in 1958, Eckel is globally recognized as the leading manufacturer of hydraulic power tongs and hydraulic power units for the world"s oil and gas industries. We offer a full line of hydraulically operated drill pipe tongs, casing tongs, tubing tongs, hydraulic backups, hydraulic power units, and tong positioning equipment. Eckel delivers a comprehensive range of tongs from 2-1/16 through 36 in. for the most demanding onshore and offshore environments, offer a full range of high quality casing and tubing, drill pipe tongs for use in all types of oil and gas drilling, well completion and well servicing activities.

03/23/2000 -- Re-open (Interim Agreement between GTE NW and Winstar Wirless, which replaces the original agreement from Lida Tong. (Treat as First Amendment per Jacob Wexler))

Magnum Manufacturing is a team of experienced casing running engineers and industry-leading professionals tired of working with existing substandard equipment. We have spent decades developing equipment to the highest industry standards, and we personally have been using the equipment we’ve developed. After 30+ years of partnering with a leading American TRS company to ensure optimal performance, we are prepared to stake our reputation on Performance, Longevity, & Safety.

Chinese PV manufacturer TW Solar (Tongwei Co., Ltd.) TW Solar spoke to pv magazine at the recent World Future Energy Summit (WFES) in Abu Dhabi about its strategy for the Middle East and North Africa (MENA) region and other global markets.

Scotland’s Gravitricity is developing gravity-based storage facilities in former mine shafts to stabilize electricity networks at 50 Hz, by responding to full power demand in less than a second. CEO Charlie Blair speaks to pv magazine about the ...

IBC SOLAR Energy, IBC SOLAR AG"s international project division, has concluded the realisation of two megawatt solar parks in Hungary with nominal power outputs of 51 and 45 megawatt peak (MWp). The green electricity generated corresponds to the supply of 35,000 3-person households. IBC SOLAR

The clean power numbers published annually by the International Renewable Energy Agency provide a snapshot of the global solar market and, this year, a lot of figures were unchanged from the previous dataset, especially in the off-grid segment.

Tongwei has revealed plans to set up a new polysilicon facility with a production capacity of 120,000 metric tons (MT) in Leshan, in China’s Sichuan province.

While the first half of 2022 was one of the busiest periods on record for new wind projects in Australia, with more than 2 GW breaking ground, solar got off to a much slower start with construction on 635 MW of new PV projects getting underway. Rystad Energy’s David Dixon attributes this slowdown to high cost and supply chain challenges and a lack of available power purchase agreements.

The Bern University of Applied Sciences in Switzerland has published the initial results of a survey on the durability and performance of residential PV inverters and power optimizers over a 15-year period. They found that more than 65% of the inverters did not present yield-relevant faults by their 15th year of operation.

SJVN, a state-owned hydropower producer in India, has signed an agreement with the state government of Uttar Pradesh to set up a 700 MW solar plant in the Indian city of Kanpur.

Solyx Energy has developed a device to maximize solar self-consumption in residential homes. The sensor measures how much solar power can be fed back into the grid at different times, while a controller redirects that excess energy into an electric water heater.

Australian modular solar manufacturer 5B’s rapidly deployable Maverick technology is set for installation at a 95 MW hybrid power plant in Western Australia featuring solar, wind, and battery energy storage.

Plans for Europe’s largest-ever PV cell and module factory are taking shape, with equipment orders placed and a projected start date in mid-2024. Enel Green Power has received €118 million ($116.36 million) in funding from the EU Innovation Fund to support the project, out of a total €600 million investment. The EU is hoping it will catalyze further investment in similar projects, and start a high-tech comeback for European solar manufacturing.

Norsun, which operates a hydroelectric-powered factory in Norway, has agreed to sell wafers to Meyer Burger, which plans to expand its annual solar cell production capacity to 3 GW by 2024.