fleet of power tong trucks price

Torque range at 2200 PSI/15.2 MPA High gear 2,400 ft.lbs/3,254 Nm “Low gear 12,000 ft.lbs./16,272 Nm” Maximum RPM at 50 GPM/189 LPM High: 86 RPM Low: 17 RPM Hydraulic Requirements 50 GPM @ 1,000 PSI 189 LPM @ 6.9 Mpa 20 GPM @ 2,200 PSI 75 LPM @ 15.2 Mpa Length 47 inches/119.38 cm Overall Width 31 inches/78.74 cm Space Required on Pipe 8 inches/20.32 cm Maximum elevator diameter Unlimited (Tong comes off pipe) Center line of pipe to center line of anchor handle 34 inches/86.36 cm Weight (approximate) 1,050 lbs./476.7 kg

Tongs - Power - BJ sucker rod tong adopts advanced sucker rod or tubing technology and has a compact structure, high reliability and is safe and convenient to operate.

Tongs - Power - New Carter Tool Co. Inc., CT93R Hydraulic powered tubing tong. Complete with 2-3/8" to 3-1/2" jaw assemblies, standard motor, torque gauge assembly, pressure relief valve... More Info

Tongs - Power - New Carter Tool Co., Inc. 5-1/2" CTSX Hydraulic Tubing Tong with heavy case and cover; complete with rigid hanger assy., suspension spring assy., front end control assy.,... More Info

Tongs - Power - New Carter Tool Co. Inc. M-Series power sucker rod tongs, complete with spring hanger assy., gate assy., front end control assy., pressure gauge assy., two 90 degree XH s... More Info

Tongs - Power - New Carter Tool Co., Inc. 4-1/2" RSX Hydraulic Tubing Tong with heavy case and cover; complete with rigid hanger assy., suspension spring assy., front end control assy., ... More Info

Tongs - Power - D D 58-93-2-R Power Tubing Tong is smaller, lighter, and faster than the Foster 5893R. The D D 58-93-2-R Tong is capable of gripping tubulars from 1 5/16" to 7" o.d. More Info

Tongs - Power - FARR TONG MODEL KT 14,000 RINEER GA37 MOTOR, LIFT VALVE ASSEMBLY TORQUE CAPACITY: 50,000 FT/LB SIZE RANGE 4 1.2-14 WITH SAFETY DOOR MOST SIZES OF FARR POWER TONGS ARE IN ... More Info

Tongs - Power - FARR TONG MODEL KT20,000 STAFFA 080 MOTOR, LIFT VALVE ASSEMBLY TORQUE CAPACITY: 50,000 FT/LB SIZE RANGE: 7-20 MOST SIZES OF FARR POWER TONGS ARE IN HOUSTON, IN STOCK READ... More Info

Tongs - Power - FARR MODEL KT5500 HYDRAULIC TUBING TONG C/W 2 SPEED RINEER MOTOR, SIZE RANGE: 2-3/8 IN. - 5-1/2 IN. OD, TORQUE RTED: 18,700 FT/LB C/W SAFETY DOOR MOST SIZES OF FARR POWER... More Info

Tongs - Power - FARR TONG MODEL KT5500 TORQUE CAPACITY: 18000 FT/LB SIZE RANGE: 2 1/16-5 1/2 OD WITH SAFETY DOOR MOST SIZES OF FARR POWER TONGS ARE IN HOUSTON, IN STOCK READY FOR IMMEDIA... More Info

Tongs - Power - FARR TONG MODEL KT5500 5 1/2 IN. TONG TORQUE CAPACITY: 18,000 FT/LB SIZE RANGE: 2 1/16-5 1/2 IN. OD, RINEER 15-13 MOTOR, HIGH TORQUE CLINCHER BACKUP TRIPLE VALVE ASSEMBLY... More Info

Tongs - Power - FARR TONG MODEL KT7585 TORQUE CAPACITY: 25000 FT/LB SIZE RANGE: 2 1/16-8 5/8 OD WITH SAFETY DOOR MOST SIZES OF FARR POWER TONGS ARE IN HOUSTON, IN STOCK READY FOR IMMEDIA... More Info

Tongs - Power - FARR TONG MODEL KT7585 8 5/8 IN. TONG TORQUE CAPACITY 25,000 FT/LB SIZE RANGE: 2 1/16-8 5/8 IN. OD, RINEER 15-15 MOTOR CLINCHER BACKUP, TRIPLE VALVE MOST SIZES OF FARR PO... More Info

Tongs - Power - FARR TONG MODEL LW9625 TORQUE CAPACITY 12000 FT/LB SIZE RANGE 2 7/8 -9 5/8 OD WITH SAFETY DOOR MOST SIZES OF FARR POWER TONGS ARE IN HOUSTON, IN STOCK READY FOR IMMEDIATE... More Info

Tongs - Power - Farrs newest tubular connection tool offers a significantly reduced rig footprint, while continuing to deliver power & uncompromising reliability. The simple design drast... More Info

Tongs - Power - Farr Canada"s newest tubular connection tool offers a significantly reduced rig footprint, while continuing to deliver power and uncompromising reliability. The simple de... More Info

Offshore Energy Services, Inc. (OES), answering to the ever-changing tubular connection design, has continued to meet the market demand by upgrading our Hydraulic Power Tong fleet.

We have multiple size and torque ranges available. The tubular size ranges we are capable of handling are 36" through 4-1/2" with torques up to 150,000 ft./lbs.

Used for production, clean out jobs and ‘plugging and abandonment’, our spread equipment delivers quality and reliability every time. Ideally suited for a range of

Key offers a broad range of squeeze services, including running squeeze, hesitation squeeze, high/low pressure squeeze, low pressure squeeze, packer/retainer squeeze, and Bradenhead squeeze.

Pipe handling devices minimize human interaction to handle and move pipe. They lower the overall cost of well site interventions by increasing pipe-handling efficiency through

Fishing Services are used to remove wellbore obstructions. Key is highly capable of providing Fishing services for cased and open-hole applications. Our tool fleet ranges

Tongs are used for breaking and making-up tubing connections. Tubing/rod tongs are hydraulic wrenches used to turn and torque pipe and rods, open-face and close-face

Blowout Preventers (BOPs) are a critical piece of safety equipment, as they protect rig crews, the rig, and the wellbore. Key maintains an inventory of

Key has the largest fleet of high quality ‘tubulars’, manufactured to industry-leading specifications. Tubulars are crucial components for drilling, completion and production programs, and we

For tow and recovery requirements, these trucks are an everyday essential. Their flexibility and usefulness makes them an indispensable asset for our fleet.

Our pump/kill trucks are used for well pressure control. Uses include testing casing, pressure testing tubing and flow lines, to support well stimulation, and in

Sand-X® Sand Management System is a custom-engineered frac tank retrofitted with a special auger to separate sand from the fluid return automatically, in a safe,

Key’s vacuum trucks transport non-hazardous fluid or waste to or from your well operation. The materials commonly carried include fresh water, field salt water, 10

Used for production, clean out jobs and ‘plugging and abandonment’, our spread equipment delivers quality and reliability every time. Ideally suited for a range of

Used for production, clean out jobs and ‘plugging and abandonment’, our spread equipment delivers quality and reliability every time. Ideally suited for a range of

Key offers a broad range of squeeze services, including running squeeze, hesitation squeeze, high/low pressure squeeze, low pressure squeeze, packer/retainer squeeze, and Bradenhead squeeze.

Pipe handling devices minimize human interaction to handle and move pipe. They lower the overall cost of well site interventions by increasing pipe-handling efficiency through

Fishing Services are used to remove wellbore obstructions. Key is highly capable of providing Fishing services for cased and open-hole applications. Our tool fleet ranges

The SmartTong® system takes the guesswork out of rod connections. As the world’s first computer-controlled connection service, algorithms ensure correct circumferential displacement on every connection

Blowout Preventers (BOPs) are a critical piece of safety equipment, as they protect rig crews, the rig, and the wellbore. Key maintains an inventory of

Key has the largest fleet of high quality ‘tubulars’, manufactured to industry-leading specifications. Tubulars are crucial components for drilling, completion and production programs, and we

For tow and recovery requirements, these trucks are an everyday essential. Their flexibility and usefulness makes them an indispensable asset for our fleet.

Our pump/kill trucks are used for well pressure control. Uses include testing casing, pressure testing tubing and flow lines, to support well stimulation, and in

Sand-X® Sand Management System is a custom-engineered frac tank retrofitted with a special auger to separate sand from the fluid return automatically, in a safe,

Key’s vacuum trucks transport non-hazardous fluid or waste to or from your well operation. The materials commonly carried include fresh water, field salt water, 10

Used for production, clean out jobs and ‘plugging and abandonment’, our spread equipment delivers quality and reliability every time. Ideally suited for a range of

Power tongs are an essential tool in the drilling industry and are used to make up, break out, apply torque and to grip the tubular components. We are distributors for both Starr Power Tongs and McCoy Global hydraulic power tongs in multiple sizes and torque ranges from high torque to low torque that can be used to run both casing, drill pipe and tubing. When determining which power tong is best for your project, you will want to select the power tong that best fits your tubular size ranges and torque required.

All of our power tongs are available with either the McCoy\\\\\\\\\\\\\\\"s patented WinCatt data acquisition software recently updated to the MTT systems or AllTorque\\\\\\\\\\\\\\\"s computer monitoring system for all the torque and turn control system needed in today\\\\\\\\\\\\\\\"s market for the making of tubular connections. Discover our wide selection of McCoy and Starr casing tongs, tubing tongs and power tongs for sale below!

Dutch Casing Services has continually expanded our fleet of power tong equipment since our inception in 1999. We take great pride in consistently delivering a superior service experience to our clients. Attention to the details and regular maintenance in conjunction with proper training and certifications guarantees our equipment is operated in the safest manner on your jobsite.

The team at GOM Energy Services is comprised of over 48 years experience in the oil and gas industry. Our main goal is to produce user friendly, field effective, and cost efficient equipment. Customer service is and always will be our #1 priority! On behalf of GOM Energy Services LLC and the team here I thank you for spending time learning about our product.

Beijing is stuck between a rock and a hard place. On the one hand, China cannot eradicate coal-fired power from its energy mix overnight. China has not yet figured out how to develop its own natural gas supplies—which are more difficult to access and therefore more expensive than those in the United States—and renewable energy expansion takes time. On the other hand, Chinese citizens are demanding cleaner air, and they want immediate improvements. Air quality is now a political priority for the Chinese Communist Party on par with economic growth and corruption. This means that China cannot continue to run the same high-pollution coal plants that were considered acceptable decades ago. Beijing’s solution is to move full speed ahead with renewables while simultaneously investing in what may become the most efficient, least polluting coal fleet the world has ever seen.

Not all coal-fired power is created equal. Emissions and efficiency—the latter being the amount of coal consumed per unit of power produced, which also affects emissions—vary dramatically based on the type of coal and coal-burning technology used. What many U.S. analyses of China’s coal sector overlook is the fact that Beijing has been steadily shutting down the nation’s older, low-efficiency, and high-emissions plants to replace them with new, lower-emitting coal plants that are more efficient that anything operating in the United States.

To better understand where China’s coal fleet is going, CAP compared the top 100 most efficient coal-fired power units in the United States with the top 100 in China. (see Tables A1 and A2) The difference is astounding.

Compared with the Chinese coal fleet, even the best U.S. plants are running older, less efficient technologies. Coal-fired power plants can generally be broken down into three categories:

Subcritical: In these conventional power plants, coal is ignited to boil water, the water creates steam, and the steam rotates a turbine to generate electricity.3 The term “subcritical” indicates that internal steam pressure and temperature do not exceed the critical point of water—705 degrees Fahrenheit and 3,208 pounds per square inch.4

Supercritical: These plants use high-tech materials to achieve internal steam temperatures in the 1,000–1,050 degrees Fahrenheit range and internal pressure levels that are higher than the critical point of water, thus spinning the turbines much faster and generating more electricity with less coal.5

The U.S. coal fleet is much older than China’s: The average age of operating U.S. coal plants is 39 years, with 88 percent built between 1950 and 1990.7 Among the top 100 most efficient plants in the United States, the initial operating years range from 1967 to 2012. In China, the oldest plant on the top 100 list was commissioned in 2006, and the youngest was commissioned in 2015.

The United States only has one ultra-supercritical power plant.8 Everything else is subcritical or, at best, supercritical. In contrast, China is retiring its older plants and replacing them with ultra-supercritical facilities that produce more energy with less coal and generate less emissions as well. Out of China’s top 100 units, 90 are ultra-supercritical plants.

When the capacity of each of the top 100 units in each nation is taken into account, ultra-supercritical technology accounts for 92 percent of Chinese top 100 capacity and less than one percent—0.76 percent—of U.S. top 100 capacity. Because the technological makeup of the Chinese plants is different, their emissions levels are different as well. In the United States, the total nameplate capacity of our top 100 most efficient coal-fired power units is 80.1 gigawatts, and their cumulative annual carbon emissions amount to 361,924,475 metric tons.9 Meanwhile, the total nameplate capacity of China’s top 100 units is 82.6 gigawatts, and their cumulative annual carbon emissions are an estimated 342,586,908 metric tons.10 Since China’s fleet uses more advanced technology, it also consumes less coal: an average of 286.42 grams of coal equivalent, or gce, consumed per kilowatt-hour of power produced in China versus 374.96 gce consumed per kilowatt-hour produced at lower heating value in the United States.

To be sure, China still has plenty of older coal-fired power units that are not using the most advanced technology. According to the latest third-party research from S&P Global Platts, which provides research on global energy infrastructure, when the data set is expanded to include all operating coal-fired power capacity in China—which totals 920 gigawatts—approximately 19 percent uses ultra-supercritical technology, 25 percent uses supercritical technology, and 56 percent uses subcritical technology.11 However, the new builds are increasingly ultra-supercritical plants, and Beijing is steadily ratcheting up the emissions requirements and efficiency standards for those older plants as well.

By 2020, every existing coal-fired power unit in China must meet an efficiency standard of 310 gce per kilowatt-hour; any units that do not meet that standard by 2020 will be retired. In contrast, none of the current top 100 most efficient U.S. coal-fired power units would meet that same efficiency standard today. (see Table A2)

The simple fact is that the United States has a wide array of cheap and abundant energy options that now compete with coal-fired electricity generation—particularly shale gas and renewables. Given the additional context of falling U.S. electricity demand and improving efficiency, even U.S. electric utility executives have indicated that their business models are rebalancing toward these options—and away from coal.12 Although higher-tech plants, such as ultra-supercritical plants, have lower operation and maintenance costs than their less efficient counterparts, overnight capital costs are, on average, around 17 percent higher.13 In a market where even the least expensive coal-fired plants are struggling to compete with shale-gas-fired plants, those investments do not make good financial sense.

One thing China’s experience makes very clear is that even if the United States were to invest in newer, more efficient coal plants, it would not be a major jobs generator on par with renewable energy. As China’s power plants are becoming more efficient in their energy consumption and emissions, they are also becoming more efficient in terms of labor. The CAP research team visited the Shanghai Waigaoqiao No. 3 power station. That plant runs two 1,000 megawatt ultra-supercritical units and supports 250 employees.14 In contrast, the nearby Waigaoqiao No. 1 and Shidongkou No. 1 power stations each run four 300 megawatt subcritical units and employ 600 people and 1,000 people, respectively.15

The same thing is happening in China’s coal mines. As the operations become higher tech, they become cleaner and more efficient, and those jobs decrease as well. This is one reason Beijing expects its coal sector to lay off 1.3 million workers from 2016 to 2020.16 Chinese leaders view renewable energy as a much more dependable employment generator; they expect the nation’s renewable sectors to generate 13 million new jobs by 2020.17

China’s energy employment shifts follow a pattern that has been unfolding in the United States for decades. U.S. coal mining employment peaked in the 1920s and then began a long and steady decline. From 1983 to 2014, U.S. coal production increased more than 28 percent, but employment still fell 59 percent.18 This reflects a shift in U.S. coal production from more labor-intensive underground mining in the eastern United States to more highly mechanized and easily accessible surface mining in the west.19 Falling U.S. electricity demand, rising energy efficiency, and sharp price drops for natural gas, solar, and wind compounded U.S. energy employment shifts by reducing utilities’ dependence on and demand for coal.20 At year-end 2016, the United States had a total of 54,030 coal operator employees nationwide.21 In contrast, between 2015 and 2016, the United States added 73,615 new jobs in solar energy generation—a nearly 25 percent year-on-year increase—bringing the total number of U.S. solar energy generation jobs to 373,807 nationwide.22

Our experienced and skilled power tong technicians play a major role in the safety and efficiency of a casing run. This makes the selection of your power tong service company a key component of overall performance.

ProTorque attracts and employs some of the industry’s most talented and experienced casing running technicians. Every detail of a casing run must be considered when looking for cost savings and efficiency; particularly on long production strings where every second counts while maintaining a safe operation. When making-up hundreds of connections, filling on the fly and selecting the correct handling equipment (air or hydraulic powered slips); we save time and effort on long challenging casing runs. ProTorque can meet handling requirements of up to 500 tons of hoist capability.